HELP GETTING Started with Sun Access Manager without TEARS.

I am new to Sun Access Manager.
I am quite familiar with how Sun Java Identity Manager works.
The following is the issue I am facing.
I've downloaded the following images from the sun website
java_es_05Q4-ga1-solaris-x86-1-iso
and
java_es_05Q4-ga1-solaris-x86-2-iso
I've installed the components on sun solaris 10
The following components were installed
/opt/SUNWcomds
I am not sure what this is for
/opt/SUNWdsvmn
I am not sure what it is.
/opt/SUNWma
What is this I was expecting SUNWam the access management software!
/opt/SUNWwbsvr -- This is the Web Server.
I know how to use it.
Can anyone tell me on how to go about it?
Is there any online tutorial for the same.
What is the difference between sparc version and x86. Can i use any of these on solaris 10?
Anyhelp getting started would be highly appreciated.
I am looking at doing the following things.
ssl,fed, auth, custauth etc
Thanks a ton in Advance.
Regards,
Vinod

I documented my installation procedure for Access Manager 7.0 (2005Q4) and Portal 7.0. Take a look at my wiki page:
http://wiki.its.queensu.ca/display/JES/Access+Manager+installation
It's a two node Access manager Legacy site and I also implemented session-failover using Message Queue and Berkeley Database.

Similar Messages

Configuring IIS6.0 with Sun Access manager

As I am new to Sun java Access manager .I have installed and configured the Sun Access manager 7.1 on Tomcat and able to login to the console also.Now I am looking to configure the web application which resides in IIS 6.0 with Sun Access manager,To do this are there any documents about how to configure the Windows IIS 6.0Policy agent with Sun Accessmanager?In the Sun website I didnt see any document related to this configuration,could anyone please help how to work on this?
Thanks in advance.

http://docs.sun.com/app/docs/doc/819-4771?l=en
should give you all the information you need. For server changes like policy refer to AM 7.1 docs on docs.sun.com

Using BEA Weblogic Portal with Sun Access Manager

Hello all,
I am wondering if anyone has had experience with using Weblogic Portal (versions 8.1 or 9.2) with Sun's Access Manager tool (part of the Identity Management suite).
In particular, I would like to know what access control tasks were performed through access manager, and which were performed portal-side.
Any information would be appreciated.
Thanks!

Hi
Has any one explored the below question.
Is WLP 9.2 compatible with Sun Access Manager?
If yes, please let know the details.
Thanks

Siebel Integration with SUN Access Manager

Hi Guys,
We are trying to integrate siebel with Sun access Manager.
I have gone thro the sun site but unable to find any documentation and policy agent to download.
Please guide me where can i find documenttaion and policy agent software download.
Thanks
Regards,
Mohit

There is no agent to integrate with Siebel directly. However it should be possible by using Sun web server or IIS agent. Here is an old document that may still apply.
http://docs.sun.com/source/816-6901-10/Chapter.html#wp19548
There was more detailed integration document on Siebel web site. But it has been removed after Oracle acquisition (http://www.siebel.com/partners/portal/docs/integrationbriefs/siebel77_sjsam_tib.pdf)
thanks,
shivaram

Integration of sun identity manager with sun access manager

Hi i am working on integration of sun identity manager 6.0 with SP1 and sun access manager7.0.IDM was deployed on Sun application server 8.1.SAm is installed on SunOneWebserver i am working on windows 2003 server.I downloaded the agent for the application server and installed.
when i am configuring resource in IDM i am getting following error.
testconnection failed for resource(s):
sun access manager could notconnect as user 'amadmin' with specified password==>com.sun.identity.authentication.spi.AuthLoginException:failed to create new AuthenticationContext{0}\n.
i modified amagent.properties,amconfig.properties and web.xml also
can any one help me on this.

Hi i am working on integration of sun identity manager 6.0 with SP1 and sun access manager7.0.IDM was deployed on Sun application server 8.1.SAm is installed on SunOneWebserver i am working on windows 2003 server.I downloaded the agent for the application server and installed.
when i am configuring resource in IDM i am getting following error.
testconnection failed for resource(s):
sun access manager could notconnect as user 'amadmin' with specified password==>com.sun.identity.authentication.spi.AuthLoginException:failed to create new AuthenticationContext{0}\n.
i modified amagent.properties,amconfig.properties and web.xml also
can any one help me on this.

Access manager policyagent 2.1 fro webspher5.0 with sun access manager in

Help It is very urgent
I have installed my sun access manager and sun direcory server on same machine solaris10.SSL is diable in directory server.Access manager working on ssl mode means it is working on Http with port 80 and Https with port443.Access manager url is
http://lhostname:80/amconsole or https://hostname:443/amconsole and
http://host:80/amserver/UI/Login or https://host:443/amserver/UI/Login.it is displaying access manager login page.It is working properly standalone.
But when i configure it with policyagent2.1 for WebSphere5.0 .WebSphere installed on windows2000 server.when i type the application URL that is running on WebSphere it does not show access manager login page.It show u r not authurised to view this page.WebSphere running on Http.
and amService log detail is*****************************************************
03/02/2006 05:57:32:018 PM GMT+05:30: Thread[Servlet.Engine.Transports : 0,5,main]
Naming service URL list: [https://my.domain.com:443/amserver/namingservice]
03/02/2006 05:57:32:018 PM GMT+05:30: Thread[Servlet.Engine.Transports : 0,5,main]
Only one naming service URL specified. NamingServiceMonitor will be disabled.
03/02/2006 05:57:32:018 PM GMT+05:30: Thread[Servlet.Engine.Transports : 0,5,main]
getServiceURL for service: auth protocol: https host: my.domain.com port: 443
03/02/2006 05:57:32:112 PM GMT+05:30: Thread[Servlet.Engine.Transports : 0,5,main]
ERROR: Naming service connection failed
com.iplanet.services.comm.client.SendRequestException: com.ibm.ws.orbimpl.transport.protocol.https.HttpsURLConnection
     at com.iplanet.services.comm.client.PLLClient.send(PLLClient.java:141)
     at com.iplanet.services.comm.client.PLLClient.send(PLLClient.java:73)
     at com.iplanet.services.naming.WebtopNaming.getNamingResponse(WebtopNaming.java:360)
     at com.iplanet.services.naming.WebtopNaming.updateNamingTable(WebtopNaming.java:421)
     at com.iplanet.services.naming.WebtopNaming.getNamingProfile(WebtopNaming.java:353)
     at com.iplanet.services.naming.WebtopNaming.getServiceURL(WebtopNaming.java:187)
     at com.sun.identity.authentication.AuthContext.setLocalFlag(AuthContext.java:1159)
     at com.sun.identity.authentication.AuthContext.createAuthContext(AuthContext.java:1100)
     at com.sun.identity.authentication.AuthContext.createAuthContext(AuthContext.java:1071)
     at com.sun.identity.authentication.AuthContext.<init>(AuthContext.java:142)
     at com.sun.identity.policy.client.AuthService.getAppSSOToken(AuthService.java:103)
     at com.sun.identity.policy.client.AuthService.getApplicationSSOToken(AuthService.java:79)
     at com.sun.identity.policy.client.PolicyEvaluator.getAppSSOToken(PolicyEvaluator.java:499)
     at com.sun.identity.policy.client.PolicyEvaluator.init(PolicyEvaluator.java:193)
     at com.sun.identity.policy.client.PolicyEvaluator.<init>(PolicyEvaluator.java:172)
     at com.sun.identity.policy.client.PolicyEvaluatorFactory.getPolicyEvaluator(PolicyEvaluatorFactory.java:118)
     at com.sun.identity.policy.client.PolicyEvaluatorFactory.getPolicyEvaluator(PolicyEvaluatorFactory.java:87)
     at com.sun.identity.agents.policy.AmWebPolicy.<init>(Unknown Source)
     at com.sun.identity.agents.policy.AmWebPolicyManager.<init>(Unknown Source)
     at com.sun.identity.agents.policy.AmWebPolicyManager.<clinit>(Unknown Source)
     at com.sun.identity.agents.filter.AmFilter.<init>(Unknown Source)
     at com.sun.identity.agents.filter.AmFilterManager.getAmFilter(Unknown Source)
     at com.sun.identity.agents.filter.AmFilterManager.getAmFilter(Unknown Source)
     at com.sun.identity.agents.filter.AmFilterManager.getAmFilterInstanceForModeConfigured(Unknown Source)
     at com.sun.identity.agents.filter.AmAgentFilter.doFilter(Unknown Source)
     at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:132)
     at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:71)
     at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:863)
     at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:491)
     at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:173)
     at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:79)
     at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:199)
     at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
     at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
     at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:331)
     at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
     at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:432)
     at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:343)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:592)
Thanks & Regards
Saini

This is an SSL handshake problem of Websphere - has nothing to do with AM.
Websphere�s JDK does not trust the Signer / Cert of AM�s deployment container.
Either configure a truststore (or use an existing webshpere truststore) where you import the Cert of the Signing CA of your AM DC�s cert.
Other option - import the mentioned cert in cacert file of IBM JDK - but be aware that this might get lost when applying an Websphere fixpack/refreshpack.
BTW what have you configured for server.port,server.host and server.protocol in your AMConfig.properties?
If you have not changed that settings agent will use the port/protocol specified to communicate with AM.
-Bernhard

Integrate IdM roles with Sun Access Manager roles

Hi all,
I am currently working on a solution involving Sun Identity Manager 7.1 and Sun Access Manager 7.1 as well. We use AM for overall authentication and SSO across the application, and IdM for user provisioning.
I need to create roles in Identity Manager, and I would like that when I assign a role to a user in Identity Manager, he gets the same role in my Access Manager repository (Sun LDAP). Identity Manager does provide a way to set attribute values in resources when a role is set. Access Manager on the other hand has both dynamic roles, based on an LDAP search, and static roles.
What are the important differences between static and dynamic roles in AM?
Does anybody know a good way to propagate roles from Identity Manager to Access Manager?
Thanks.

I found answers to my question. I succeeded in setting the Access Manager role from Identity Manager using the nsRoleDN attribute. Here are some references to begin with:
About directory server roles:
http://docs.sun.com/app/docs/doc/820-2493/fvbrn?a=view
Forum thread reference:
http://forums.sun.com/thread.jspa?threadID=5208694
Here are roughly the steps I followed to get this working.
Access Manager roles setup:
1. In Access Manager, create a new static role named test_role under the identities realm (in Subjects > Role).
Identity Manager roles setup:
1. Create a new role in Identity Manager: tab Roles, click New....
2. Assign the LDAP resource to synchronize the role with.
3. On the Assigned Resources line, click the Set Attributes Values button. This shows up the attributes listing allowing you to bind your IdM role to your LDAP repository.
4. Set the attribute nsRoleDN to the LDAP DN of the role that was created in AM (nsRoleDN must be added in the resource attributes mapping before).
* In the column Value override, select Text.
* In the column How to set, select Authoritative merge with value, clear existing. (* See IDM Admin guide about this setting, I am still not sure how it reacts with multi-value attributes)
* In the text box, enter the role DN text (ex: cn=test_role,dc=com).
5. Save the role. You can now add the role to a user.

Securing web services with Sun Access Manager

Hi!
I have gone through some documentation about Sun Access Manager, and I'm a little bit confused.
What I want is to secure some web services which are deployed on a BEA WebLogic 9.1 server (WLS). Two solutions are possible: To install some kind of plugin into WLS or to place some kind of proxy in front of WLS. In both cases, the purpose would be to authenticate the caller based on some kind of ticket (SAML or similar) and authorize access to the web service.
I have read about the "Sun Java System Access Manager Policy Agent 2.2 for Weblogic 9.1" (those guys really like long names....), but in this documentation web services aren't mentioned at all. They only seem to care about HTTP requests from a browser.
I have also read about the Policy Agent 2.2 in the documentation called "Sun Java System Access Manager Policy Agent 2.2 Guide for Sun Java System Application Server 9.0/Web Services" (puh...). This document explicitly talks about securing web services the way I want.
My questions are:
1) Is it possible to secure WLS based web services in the same way using the Policy Agent for WLS?
2) Are there any documentation/tutorials/etc?
Thanks in advance :-)
Anders

what you need is a webservices agent that would enable you to "protect" your webservice provider, which I assume is on a BEA weblogic provider.
the "Sun Java System Access Manager Policy Agent 2.2 for Weblogic 9.1" is "NOT" awebservices agent, but a normal J2EE policy agent.
So.. having said that. here's what I'd recommend.
1. install the webservices agent on bea weblogic. (note: NOT the J2EE policy agent)
2. configure it to use your access manager instance for authentication.
3. configure your webservices client to use the webservice provider. (note: you'd need the webservices APi's available on the client too... so the quick dirty method would be to install the webservices agent on your client too....) you can later bundle the webservices client independently and provide your"customers" with a webservices client bundle...
4. voila... your webservices are not "protected" by acces manager ;-)

BO Authentication with Sun Access Manager

Post Author: aboucher
CA Forum: Authentication
Hi,
Is there a way to use Sun Access Manager (Role base) with BO. We are using XIR2 but we are willing to move to XIR3 if this version can do this job. I know that BO can be configured with LDAP, AD, Enterprise but is there a Custom choice. Any idea?
Thanks

Post Author: TAZ
CA Forum: Authentication
So quickly reviewing sun access manager it doesn't seem to be an LDAP server per se. It's more like a portal used for SSO. If that's the case then you would integrate LDAP accounts and then use technology like trusted authentication for SSO from the sun access maanger portal. In that case trusted auth will support just about any front end as long as the user info can be forwarded to us in one of 7 methods. You can read more about trusted authentication in the XIR2 deployment guide
http://support.businessobjects.com/documentation/product_guides/default.asp
Integrations of this level typically involvel in depth planning and should probably be done with the assistance of a BO consultant.
Regards,
Tim

Integrating windows authentication with Sun ACCESS MANAGER

Hi,
I have implemented sun access manager and successfully protected an application (ABC). At present iam using the SDS as the authentication and authorization directory. I login in to the machine using the network username and password which is on AD.
I want to integrate my authentication/authorization mechanism from SDS to AD. so that when i login into the machine and open application ABC it should not ask me for the credentials; instead allow me to the homepage directly.
How to do this.
Thanks in advance
Maruthi

Hi!
Maybe this helps you, it describes how to setup AM and policy agent to handle basic authentication protected sites. While the article is about sharepoint it should work for any application.
http://developers.sun.com/identity/reference/techart/sharepoint.html
Christoph

Help Getting Started with the Zen Vision:M (Z

Hi,I just got my ZVM and want to get started with it. I have a couple of questions, first:?. I have Windows Vista. Can I just plug in the ZVM and go without using the Installation CDs? Or do I still need to install something off of the installation discs?2. Why 2 installation discs? There is with a black cover that says Easy Start CD and has the Urge and Window Media Player logo at the bottom. The other is just in a plain white bordered sleeve with a light colored disc that says Zen Vision: M Installation CD at the bottom. I think I want to start with the light colored disc, but want to make sure. Thanks.

I think that the White disk that says Zen on it is the one you want it has Creative Media Source on it and is a very useful tool for me, the other disk has Windows Media Player on it and will also install a connection to a website that you can purchase tracks from (which i took off as soon as i found this out) not the WMP though, for some reason i could not get my Zen to work properly without the WMP loaded on my pc, however i use the Creative Media Source instead of the WMP.

Business Catalyst Help | Getting started with Business Catalyst

This question was posted in response to the following article: http://helpx.adobe.com/business-catalyst/using/getting-started-business-catalyst.html

Hi,
Welcome to Business Catalyst.
From the sounds of your requirement it looks very possible to acheive what you are after with a combination of perhaps APIs and using our import features + custom report generator.
Here's a list of our API calls -> http://kb.worldsecuresystems.com/635/bc_635.html
Also the various import options within BC -> http://kb.worldsecuresystems.com/kb/importing-data.html
Lastly our custom customer report generator -> http://kb.worldsecuresystems.com/kb/build-customer-report.html
I would also if you haven't already go ahead and test out BC. It appears identifiers are what would be "users" having back-end access to the system to either generate a report or email broadcast who may also need to analyze incoming data.
If still needing assistance please reach out to our direct support so we can help guide you further if needed. -> http://helpx.adobe.com/contact.html
Kind regards,
-Sidney

Beginner! Need help getting started with recording music.

I am the definition of 'new' at the moment. I want to record my own music at home and I've been told that using an Apple Mac is one of the better ways to go about it at home.
I have a number of questions, most of which have probably been asked before (apologies!) starting right from the beginning.
1. What type of Mac would be best suited as a dedicated tool for recording music? Obviously speed and memory are big factors, but are there any other considerations here (available inputs, drivers, sound cards etc)? I'm hoping to keep the cost below AUS$3000 if possible.
2. Do i need any other hardware for this application? (this is where you can tell how inexperienced I am haha) such as mixers etc? If I should need a mixer, is there a particular type or brand of mixer that works well with Macs?
3. Will plugging a guitar amp into the mac improve sound quality over plugging the guitar directly into the Mac? I bought a Griggin Garage Band guitar cable a while ago to record some background music for a friend's DVD, and I found it worked well, but I'm looking for the best quality sound now.
4. What would be the most effective software to use? I've briefly used Garage Band and found that to be simple and useful, but I've heard that there are better software packages available.
I'm hoping to be able to record guitar, bass and vocals directly on to the Mac, and create drum tracks using samples and loops. I know how to play music but as you can tell I know very little about recording it! Any help or suggestions would be appreciated!
Thanks..

I would presume one line level input will suffice?
Close, you need a Line Level AND Mic Level input since you'll want to record vocals.
Thanks for the link to your Q&A page, I found some very useful info there.
It's showing its age, and will hopeful get updated soon, but most of the info is good at least for a background.
Anyway, I think I might recommend this Presonus INSPIRE over the FireBox, it'll save you about $100 and since PreSonus makes excellent equipment (and we have an active member here that uses the Inspire), I'm confident that it offers great quality.
I think the firepod that you use looks great, but might be overkill
I agree, the FirePod would be serious overkill for your needs. Again, an awesome interface, but you'd be paying for all those Mic PREs, and using 1. That wouldn't make sense, and since the FP isn't cheap...
my talent and engineering knowledge is quite limited
Then I would strongly suggest GB as the software, and then do lots of reading. The weakest link in music production is your engineering skills. Mixing and Mastering (especially the latter) are art forms. A bad engineer using a $10,000 bit of software and hardware would make a fantastic performance sound like garbage. With good engineering skills you can make a pro recording with GB.
The learning curve with something like Logic is dramatically increased, and again, without the skills to take advantage of what it offers, your recordings are not going to sound any better. At the very least, start with GB to learn the skills of Recording/Editing/Mixing/Mastering. The "price of admission" is low enough that if in a year you find that you need a feature GB doesn't offer, your money will not have been wasted, it will have been valuable learning time.
Hope those more specific answers help
~~HangTIme [Will Compute for Food] %-)>
Note: I am an Amazon Associate, if you purchase this item via my link I will get a small commission)

Help getting started with Aperture

Hello, Can anyone advise please. I am getting an imac, and have decided to work with Aperture & NIK plug-ins, and also change from NEF files from my D90 to DNG (I have been using Capture NX2, but have run out of patience with Nikon, and can't risk there being no future with Nikon software).
I understand, or think I do, that I can change NEFs to DNGs within Aperture, and these are converted to TIFFs automatically after work in NIK (kindly correct me if I am wrong). Also that Aperture keeps the original DNG, which holds any work done in Aperture, plus a TIFF copy that includes the sum of the work done in both Aperture & NIK
3 questions please if I may:
1) I wonder if I should do all possible work in Aperture first, so most is in the DNG, and only then open with NIK plug-in(s), at which time the TIFF is produced. Does this really matter, and is there any benefit/need to do any work, such as sharpening/noise reduction in NIK first, or could this sort of thing be done after working in Aperture - just keep hearing of importance of staying RAW as much as possible, so worried about going straight to TIFF and then doing ALL the editing in TIFF format
2) In nikon View/NX2 I have been used to (and like) seeing my folder tree. I currently make folders for each different location I shoot at, Then sub-folders titled with date yymmdd and location name again + numbered 001,002 etc.
Could/should I either a) have Aperture do this so I can easilly find/see my folders, and /or b) and/or copy my photos to manually made folder tree on my desk top or wherever on mac hard drive, and then copy or move from there into Aperture (or can Aperture be just 'pointed' to the folder tree
3) Can you suggest best way for me to move files from either view nx/nx2, or from external hard drive where I have copies of my NEFS
I appreciate your help, so I can get going with Aperture and my imac, Thanks

I understand, or think I do, that I can change NEFs to DNGs within Aperture
No you need to convert to DNG before importing into Aperture. But way are you converting, doesn;t Aperture handle the RAW files from your camera? I'm pretty sure the D90 is supported.
When you edit an image using an external editor or plug-in Aperture creates a separate 'master' image and sends that to the external program. I the case of NIK plug-ins I do believe they work in TIFF. When the external program is done that 2nd image is stored in the Aperture library.
To question 1, I would do the initial work in Aperture and then work in the external program. I figure I want the best possible image to work on with the external app.
For question 2 you will need some time to learn the layout and workings of the Aperture library. You will need to decide if you will be using a managed or referenced scheme for your masters. There are many good posts here on this subject. Look for posts by Kirby Krieger specifically he's covered these questions in depth.
Not sure about 3 are you asking how to get your images into Aperture? Or something else?
good luck
regards

Getting Started with the Contract Manager API

I am looking for a quick way to move invoices that are assigned to the wrong contract or purchase order. (Right now we're deleting the current invoice and creating a new invoice on the correct contract, before re-entering all of the invoice information).
It seems that this might be as simple as changing a key on one (or more?) invoice tables to link it to the correct contract or purchase order, and that the API might be the way to do it.
So, if I wanted to investigate the API, where should I get started? I've read through most of what can be found by searching for "contract manager api" - and most of it seems to be this (http://www.oracle.com/us/products/applications/042740.pdf) or consulting companies. I'd like to see if there's somewhere with examples or a tutorial so that I can determine if this is something I can do.
Thanks!

The only documentation I have seen has come from Oracle Primavera. The documentation on the API is a little week and takes some time to get your head around. On how to make the move of existing invopices to another contract. In my experience it has been best to recreate ratehr than reassign. Of course this can cause much rework and can have ramifications.
Option 1 - Do it by hand. Best way to make sure all of the needed data and business process are followed.Keeps the summary fields calulating properely etc..
Option 2 - Use the API. Sounds eaisier than it is. Really need to be experienced at this otherwise you might as well do it by hand, in fact using the API is JUST LIKE doing it by hand since you must follow the business process in place. In cases where the data entry is so huge I'd pick this route, but we have several years of expereince leveraging the API at this point, so we can get it done. I don't know how you are loading so my exact wording might not match your tables. My approach is to untagle the existing invoices first by removing approvals (if any, certainly applies if doing pay apps). Then starting with the first one, I would load each in the order they need to entered. Several tables may need to be updated/added to: Some of these might be Master Table, SOV, Cost Detail and Attachments at the Master or SOV level. Just from my horrible exapalnation you can see there are some hairs on this.
Option 3 - Change the keys and reference numbers from the back end of the database. Normally NOT RECOMMENDED and onyly should be used in extreme cases where needed. My approach here is to contact Oracle support, discuss issue, get theri recommendation, document it then move forward if needed. Down side of this, especially in the requisition area, is that we have seen the summary information getting thrown off and not calculating properly afterwards. I have seen this more with API than with changing keys, but assume that the same issues would apply since editing from the backend would not trigger code in the applciation to update? If you go this route use Oracle as a resource and do your research to make sure you do not orphan any records in the tables. The Contract Master Key is used in several forms and sometimes the Document NUmber is used as well and both need to be updated when appropriate.

HELP GETTING Started with Sun Access Manager without TEARS.

Similar Messages

Maybe you are looking for