HELP! Graphics Card

Hey,
I have an Apple Powermac G5 Single 1.8. I need a new video card to better run Motion 2 with, and I found a decent one for a good price, but wasn't sure if it would work with my Mac.
It's the ATI RADEON 9800 XT 256MB.
Thanks in advance for all the help.

Is this card that you've found labeled as being a Mac card? If it's not, it won't work. Mac video cards require a different on-card ROM than the PC versions do.
Assuming it is a Mac card, the following thread summarizes the Motion performance with various cards: http://discussions.apple.com/thread.jspa?messageID=2345479&#2345479

Similar Messages

Help: Graphic card don't work properly

Hi,
I built a new pc with
MB: MSI H87-G43
CPU: Intel Core i5-4670
GPU: MSI N660 TF 2GD5/OC with S/N: 602-V287-28SB1307046452
Sys: Windows 7 64b Ultimate
PSU: Corsair RM650 (650W, gold certified)
My problem is that after initial built I was unable to run pc with N660 in, it would not load at all. After removing it, pc boots and I can work on integrated graphic card. I took the card to my friend where it worked without issue so what we did was to flash it with BIOS update from MSI - N660 TF 2GD5/OC / BIOS. After that card started to show artefacts and ended with blue screen on my friends PC. I took the card, installed it in my pc and it booted, however with artefacts, buti t worked. After installing nvidia drivers I have blue screen as well. Reverted this by going back with integrated graphic and removing drivers.
MOBO updated to BIOS 2.5 via Live Update 5
I also tried my old graphic card which is ASUS GTX295 and it doesn't boot as well (at all).
Any idea? I already ran out of options now...
Update: I used flash for this model, but as I read it needs specific S/N, might be that issue?

Quote
NV287MS222.ROM
This vbios is not for your card. It's NV287MS.2C versions (legacy) or NV287MH.2C (gop) versions.
Attached are NV287MH.2C0 (gop) and NV287MS.2C2 (legacy). Use what you want of these two and retry.

Help graphics card problem

Hi i have a problem with my graphics card windows says it is a pci card but it is in my agp slot what must i do to set it to agp
Mobo is kt4av
2800+ amd athlon 333 mhz fsb barton
2x 256 corsair 2700 mbram
maxtor 120 gb 8 mb cache

isn't this a cross post of your "laggy mouse" thread? if so - i told you so. you need to install the latest video card drivers as i indicated in the other thread.

Urgent Help Needed: ATI Graphics Card install

Hello All.... I am in need of some urgent help..
I am trying to install a new graphics card - the ATI Radeon 9600 SE. I currently have a Voodoo3 card. I followed all of the instructions step by step, but when I plug the monitor to the Radeon card and boot up, I do not get any display. I have tried everything I can think of, and yet - I am sure the card is secured in place and the monitor is plug into the card.
Can anyone help me on this one.. ATI's support is, well - lacking..
Here is some info on my pc:
MCI motherboard
AMD Athlon(tm) XP 2000+ 1.7 GHz
768 MB
AMIINT - 10 Version 1.00, 07/10/02
Could the problem be with switching from a regular PCI card to an AGP card???

Quote
Originally posted by southmike
okay i'll bite what are omega drivers,
how are they different from cat4.2 drivers
i was suprised that the voodoo 3 would work in a AMD64 mobo...
whoops....just read the rest of the post :lol:
BTW is there an external power connector that needs to be plugged in?

Problem with MSI GTX 960 GAMAING 4G graphics card - Please help

So I just bought an MSI GTX 960 GAMING 4G graphics card. My problem is that it seems to randomly decide when it wants to run fine at 1215 MHz, and when it wants to downclock to around 135 MHz. Today for example, I was playing Witcher 3: Game was running fine (~55 FPS) for a few hours because the card was performing at maximum. Then, out of nowehere, I dropped to about 4 FPS. I checked Afterburner, and the core clock went down to 135 MHz, while I was still in game. The card is not overheating during gaming. I have the fans set to 35% speed at all times and the GPU never got hotter than about 50c.
I have the latest nVidia drivers installed. I even tried an earlier set of nVidia drivers and the same things happened. Also yes, it is firmly seated in the PCI-E slot and yes, the power cable is firmly plugged in.
PC Specs:
Intel Core i5 Devils Canyon
Gigabyte GA-Z97N-WIFI mobo
GSkill Sniper 16GB RAM
MSI GTX 960 GAMING 4G graphics card
Antec EDGE 550w PSU
I understand these newer graphics cards have power saving settings built in, but I have my nVidia control panel settings to "Prefer maximum performance" and it doesn't seem to help. It seems my card is putting itself into power saver mode at will. I suppose my PSU could be the culprit even though the recommended PSU is only 400w, and I have 550w. Any ideas?

So it turns out I wasn't running the latest BIOS for my motherboard. I updated my BIOS and cleared CMOS. Everything was running fine for a couple hours. I was playing Witcher 3 at full clock and memory speed. GPU temp was hovering around 62 deg c at 60 FPS. Then after a couple hours, the game crashed. Rebooted my computer, and now I am back to the same issue where the card won't run at full speed in a 3D application. Even ran the Valley benchmark tool again and the card didn't increase speed to compensate.
Do I have a defective card? If so I will get it replaced from Newegg.
Also I don't know if I am running the latest vbios. GPU-Z says I have 84.06.14.00.F3
If there is a newer vbios, I can try to update and see if that does anything. I will try anything before returning this to Newegg. My old video card bit the dust and artifacts everywhere, so I don't have a temp replacement.

Help installing AMD Radeon 8490 graphic card on HP Pavilion P7-1110

Appreciate any help on this that anyone can give. I'm at a loss at the moment. Just got an AMD Radeon 8490 graphics card to put into the HP Pavilion p7-1110 desktop. I have not opened up the back of a computer for probably ten years (used to do it, but haven't for a long time). The card I got was new, but pulled from a workstation before going out, and came with no disk or documentation.
I tried just opening up the back, and putting the card in the PCI-16 slot, but when I restarted the computer, the computer did not recognize either the old integrated graphic card or the new one. When I pulled the card back out, it recognized the old integrated card.
From what I've been reading, there's a suggestion that I uninstall the Intel Integrated graphics driver before trying the install again, then plugging in the new card, turning the power back on and letting Windows 7 choose the drivers necessary for the new card, then it might work.
But what if it doesn't. Then I don't have the drivers for the old and it's gotten me nervous that I'll be without any graphics at all and unable to use the computer.
Any suggestions? Don't know why this has me this nervous, but I guess it's that lag time between dealing with a motherboard.
Appreciate any assistance, guys.
Nervous in PA.
JD

Hi,
I see two possibilities.
The AMD 8490 is not compatible with your PC.
The 250 watt power supply in your PC is insufficient.
Try clearing the CMOS and see if that helps. If not, then try the BIOS update that is posted for your PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Help me choose a good Graphic Card for my Laptop

Hello guys, first let me say I'm glad I've found this forum, It's been some time that I wanted to decide and buy a new graphic card for my laptop, but I guess this is the time and I'll start by asking for some help from you.
My laptop is HP Pavilion g6, the specs are the following (using CPU-z)
CPU: http://prntscr.com/5fqo9f
Caches: http://prntscr.com/5fqohx
Mainboard: http://prntscr.com/5fqomk
RAM: http://prntscr.com/5fqos4
SPD: http://prntscr.com/5fqoxh
Graphics: http://prntscr.com/5fqp1b
I wanted to ask you what kind of graphic card would suit my laptop, and which one do you recommend me buy?
I would to play all the latest games... I believe I need another 4GB of RAM memory, and I believe my CPU is good enough, what do you say guys?
Thank you!
This question was solved.
View Solution.

Hi,
What is the model/product of your laptop ? Generally speaking: we can't upgrade video card for nearly all laptops.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HELP! Upgrading Graphics Card on Mac Pro 2009

Hi all,
I'm interested in upgrading my current graphics card NVIDIA GeForce GT 120 512 MB to something with more memory.
I'm having a hard time trying to figure out which brand to go with that'll be compatible with my Mac Pro 2009 model and will work well under OSX Mavericks.
I really dont want to break the bank. Need a good amount of GDDR5 ram for Adobe Creative Cloud mostly. Would also like to run some gaming on PC Bootcamp drive under Windows 7 (Titanfall, Crysis, Battlefield, etc). However that's all secondary, thanks for your help.

LOTS of choices, depends if you want ones that will work without fuss (ATI 5770 & 5870 plus Mac edition EVGA 680 and Sapphire 7950) still give you boot screens if you option boot.
If you don't care about boot screens, you can use almost any recent ATI or Nvidia card. If you only boot into OSX, you can live without boot screens.

Need help with power supply & graphics card upgrades

I have a HP Pavilion p6320y that I bought 8 months ago. AMD Phenom II x4820 Quad Core processor. I play WoW and since the last big patch, have been suffering with low fps. I updated drivers and followed all the advice given to me by Blizz and finally figured out that my Nvidia GeForce 9100 (integrated graphics) isn't good enough anymore.
I checked my computer and discovered that I have a 300w power supply (12V) and read on another post here that something stronger than 300w is needed to run a decent graphics card.
Now for my questions:
How much of a power supply can I upgrade to without hurting my computer, but will be enough to run a good card?
What would be a good graphics card for this computer?
I've been looking at the Nvidia GeForce GTX 460 1GB GDDR5 PCI Express graphics card and wonder if that will work on my computer. Most of the nicer cards seem to be the PCI Express and I'm not sure if that will work.
Any advice will be most helpful. I have some experience with the inner workings of my PC and would like to fix this myself instead of running to the closest computer shop and paying someone else to. Thanks!
This question was solved.
View Solution.

Well, you are starting out from a fairly low baseline with the integrated graphics. It will not cost much to have a substantial increase if all you want to do is run WoW without error messages. Yes, the 300w power supply is an issue and rules out any card that will require its own power (i.e. needs its own power cord like a hard drive) but there are several mid-grade cards that can run off bus power alone (i.e. just from the pci-e slot itself). Just taking a quick look at newegg.com I see the following:
GeForce 9400 under $50
Radeon HD 4650 under $50
GeForce 9500GT a little over $50
Any of these should get you where you want to be and not require a PS upgrade. The slot you have available is a PCI Express x16 slot so don't look at AGP cards; they will not work. If you want to install the card you mention you need to get a better PSU.

Need Help with power supply reccomendations for my graphics card

hi
i have a MSI GeForce GTX 780 Graphics card... i built my own system, i also got a rosewill rx750 power supply in it which i think is causing me problems, the computer works great until i get into games like titan fall and try and get into a game then it restarts the computer on its own.. has done this with a few games, but it works fine when surfing the net and so forth, i have read its to do with the power supply being week and also read my chosen power supply isnt that good... anyone got any recommendations for me that i should look at or am i looking in the wrong direction with whats wrong with my pc... any help would be great thanks

yes the PSU is the most important choice out there and corsair and seasonic are the best out there! (never buy cheap PSU's as like abvolt said a cheap one can easily kill your more expensive parts)
Cheap PSU = made of the most cheap parts they could get "think cheap shanghai parts are used that may be of any quality good or awful as its just what they could get for the lowest price" (ever bought anything that was super cheap they break very easily)
Quality PSU = the use of good quality well made parts and will have very good testing done on them to make sure they are stable and pass very tight regulations and conform to specs for 10-30 different factors each.
a cheap low quality PSU I class as a paper weight as it will never go near a computer (maybe i would use one as a basic bench PSU for things i do not care if they die or just for testing a fan or something that rubbish dirty power is not really a major problem but silicon is not tolerant to dirty power and will kill parts)

Will Graphics Card Help Aperture on Mac Pro?

I've been using Aperture for many years on a variety of Mac hardware. I have 5 or 6 image libraries, ranging in size from 50gb to 250gb. I have no referenced images, do not use "faces" or other CPU-intensive features, and often perform tasks which reportedly improve Aperture performance (deleting caches, repairing/rebuilding libraries, defragging hard drives. deleting prefs). While these tricks often result in a snappy experience on relaunch, Aperture returns to its sluggish ways after a few minutes of work.
My workflow is very simple -- I plug in my camera, download photos to the HD, and then edit them, which consists of adjustments such as exposure, white balance, sharpening, rotating, cropping. I don't do much retouching, red eye, or other fancy editing. Occasionally I use the "external" edit feature to retouch in Photoshop. I shot for many years with a Canon Rebel, 14MP I believe, and recently got a Nikon D800. I am finding the performance going through D800 raw files (not even editing, just flipping through them) unacceptable. For example, if I go to hybrid list/preview view, and press the "down" key 10 or 15 times, by the 5th image, there is a very noticeable lag, and often the display beachballs for 10 seconds or more before it gets to the bottom of the list. Basic tasks such as cropping or rotating often lock the display for long periods of time.
For many years, I blamed Aperture's awful performance on my hardware. I worked on a series of Mac laptops. Although I usually had the latest hardware, they were no desktop. Recently, I bought a Mac Pro with a 3.2GHz Quad-Core Xeon processor, 16GB of ram, an OWC SSD (for the system -- the libraries are on a 7200RPM drive), and a ATI Radeon HD 5770 graphics card. I was dismayed to find out that Aperture is STILL unbearably slow. If I can't simply flip through some photos on a top of the line Mac Pro, what is this program good for?
My question now is, would I see a significant performance gain if I were to upgrade yet again to a faster graphics card, such as the Radeon 7950? I've been reading up on these cards, and it seems like native support is coming in 10.8.3. While I hesitate to pour more money into my quest for a useable Aperture system, I wonder if this would finally show some significant performance gains. I've read conflicting reports from other users who've upgraded the graphics card. Is the advantage mainly for 3D or gaming applications or would this help Aperture too?
Thanks in advance for any replies!

In the past Aperture has been very GPU-dependent. The very best G5 tower would bog on Aperture unless the stock GPU card had been upgraded. I expect current Aperture also to benefit from a stronger GPU but I do not have absolute info on that. And your existing 5770 is not a lame card.
I know 16 GB RAM seems like a lot, but with D800 files and an Aperture/Photoshop workflow you may still be paging out to disk. My Aperture/Photoshop workflow paged out at 8 GB RAM with files 1/3 the size of the D800 files.
You should evaluate whether or not you have adequate RAM:
Look at the Page Outs number under System Memory on the Activity Monitor app before starting a typical Aperture/Photoshop work session and write the number down. Recheck the Page Outs count after working for a few hours and write the number down again. If the page outs change (manual calculation of ending page outs number minus starting page outs number) is not zero your workflow is RAM-starved.
Ignore the pie charts and other info in Activity Monitor because they are often misleading regarding RAM usage. For RAM analysis, count page outs.
If your test shows that page outs increase at all during operation you should add RAM. RAM is dirt cheap and use of additional RAM a very desirable characteristic for an Aperture/Photoshop workflow. If it was me I would double to 32 GB RAM and set PS (PS Preferences/Performance/Memory) to use 16 GB of RAM.
Hard drives slow as they fill so make sure none of your hard drives are overfilled. I suggest 70% full as an arbitrary maximum but even less full is preferable for speed. If your Library drive exceeds 60% full I suggest setting a RAID 0 array on two or more identical drives to get extra capacity and speed. Of course pay careful attention to frequent Library backup.
Some apps like browsers are notorious for "leaking" memory so when doing serious images work keep non-essential applications closed. A SSD drive for boot helps because when apps open in just 3 seconds there is no reason to keep extraneous apps open.
HTH
-Allen
P.S. I strongly recommend that original images be fully backed up before importing into Aperture or any other images management application.
P.P.S. Makhe sure you have a properly set PS Scratch Disk assigned on a fast underfilled drive, and empty the scratch disk routinely.

I had a 'dead' iMac repaired and it needed a new HDD & graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I've no idea what this will be. Help please.

I had a 'dead' iMac repaired and it needed a new HDD and graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I have no idea what this will be. can anybody help please?
<Personal Information Edited by Host>

On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R

Adobe photoshop cs4 graphics card acceleration help!

Need a little help,
everytime i start cs4, it says "adobe photoshop cs4 now includes graphics card acceleration. we recomend you vist your video card manufacturers website and download and install latest drives.
I am running vista 64 bit and a ati radeon hd 4800 series card "4870 to be exact" and under properties it is 8.612.0.0, but when i follow the adobe link and it brings me to the site it has version 9.5?? i clicked update driver and it says its upto date, is this a problem, and why does it show this everytime photoshop starts?
thanks

Go to this site and download the 9.9 driver set. The 9.5 driver set had a streaming problem that had to be fixed with a hotfix. I have the 4870 also and the 9.9 drivers are stable and have no issues with PS CS4 on vista 64 bit.
http://www.amd.com/us/Pages/AMDHomePage.aspx
Sometimes it is better not to change drivers if you don't have issues. But the 9.5 set has issues.
Make sure you un-install the old drivers. When you click on the Icon and start the install it will unpack as normal but you will come upon a screen to install or uninstall. Choose uninstall to remove the old driver package. Reboot. Then click on the icon again, it will unpack and you will get the screen again so choose install. Reboot after install.
If I remember correctly the 9.5 drivers, after install, did not show the reboot screen. You still have to reboot.
mikemikemike09 wrote:
Need a little help,
everytime i start cs4, it says "adobe photoshop cs4 now includes graphics card acceleration. we recomend you vist your video card manufacturers website and download and install latest drives.
I am running vista 64 bit and a ati radeon hd 4800 series card "4870 to be exact" and under properties it is 8.612.0.0, but when i follow the adobe link and it brings me to the site it has version 9.5?? i clicked update driver and it says its upto date, is this a problem, and why does it show this everytime photoshop starts?
thanks

I have a hp a6814y computer and need help with a graphics card

okay i wanna upgrade my hp with an actual graphics card, so i can play games without it lagging. i mainly play rts games, like command and conquer generals, etc and about to get company of heros. now i need to know what kind of card i can put in this computer. i would like to put this one in
http://www.newegg.com/Product/Product.aspx?Item=N82E16814102824
i hear people say the min is 300watts and some say 450watts. but then idk, if this card can hook up to my power supplie.
i just need help getting a very good card for this computer without updating the power supplie

Hi,
Check with Athena as they maintain a PC Cross Reference list and see if the power supply that you have selected is compatible with your PC.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Mac Pro 3, 1 Upgrading Graphics Card Help!

Hello to all and I first apoligize before hand incase there is a similar post.
I am currently in the mix of getting myself a new graphics card and upgrading the RAM I have on my early 2008 (3, 1) Mac Pro and dont know what I am looking at.
My current specs are as follows:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor: 2 x 2.8 GHz Quad-Core Intel Xeon
Memory: 4 GB 800 MHz DDR2 FB-DIMM
Graphics: ATI Radeon HD 2600 XT 256 MB
Software: OS X 10.8.2 (12C60)
I am currently having issues with not waking up from sleep and the performace with the graphics card rendering and fps in games are very poor. Tired of having all of my video settings on low.
I play League of Legands, Dota 2, Portals, CounterStrike . . . etc. There are a lot of different options now for cards than ever before but I am looking to stay within a budget. For the graphics card I am not looking to spend over $400 and would love to find something even cheaper than that. I have researched many of the forms within discussions.apple, apple insider and as well have talked to a senior advisior with apple. She recomended the Nvidia Quadro FX 5600.
I specificly want something at or above 1.0 GB VRAM to handle my 2 Displays which are:
HP 2711:
Resolution: 1920 x 1080 @ 60 Hz
DELL 2405FPW:
Resolution: 1920 x 1200 @ 60 Hz
If anyone can point me in the right direction as to what to buy for a graphics card because I am not that well educated in that side of the computer. I can handle upgrading the RAM by myself but would also like a little push.
Any help/response would be great!

The "regular" Apple Mini Displayport to Single-Link DVI adapter (is not an ACTIVE adapter) is US$29. for displays up to 1920 wide.
Third party Mini Displayport to Single-Link DVI adapter ACTIVE can be had for about US$35 from Amazon or NewEgg. for displays up to 1920 wide.
http://www.amazon.com/Accell-B087B-006B-DisplayPort-Single-Link-Certified/dp/B00 4071ZXA/ref=sr_1_4?ie=UTF8&qid=1362369627&sr=8-4&keywords=ACTIVE+Mini+Displaypor t+DVI
The Apple Mini Displayport to DUAL-Link DVI ACTIVE Adapter with additional power from an attached USB cord is US$100. required for for wide displays.

Problem with NEW H520 when installed new power supply & graphic card. Please help!

My H520 was working perfectly and was running FAST..especially when rebooting. ( It was AWESOME! )Then I installed a new power supply (Coolmax 400w) and a new graphic card (Sapphire Radeon HD6450) and then everything changed. Now my computer is booting very SLOWLY and all the programs are taking a long time to load too. I was getting a black screen for almost a full 2 minutes before the windows 8.0 screen would finally load up and then it hangs there for a few seconds and finally goes to the start screen in windows. But BEFORE I installed this new hardware, when I would reboot, I would see the Lenovo splash screen come up for a few short seconds and then it instantly went to the windows welcome screen. And even then I would barely have enough time to see the welcome screen before it instantly loaded into the windows start screen. Everything would load up fast on the desktop too and we'd be good to go. It all took about 30 SECONDS.
But now? It takes MINUTES to get everything going. After it FINALLY loads up (it takes almost 2 full minutes now!), everything hangs up. When you first click on the desktop, it takes a few seconds for all of the icons to pop up. Before I loaded the new hardware, everything loaded up instantly. I didn't even see the icons load because they were already there. But now I have to wait for them to load up before I can even see them. And it's like that with every program and web browser I try to use now. Everything hangs up at first and then finally loads. The programs work but they are sluggish.
So I uninstalled the new power supply and put back in the original 280w power supply and I took out the graphic card but it did no change. The machine is STILL running slow on everything it does and booting very slowly.
I have seen this problem mentioned elsewhere about Lenovo computers but there is never a solution. Please help! It took me a long time to save up for this computer and I have been babying it ever since. I will never be able to afford a new one or pay for tech repair. I need to fix this! I was so thrilled with this computer before the hardware upgrade. This is devastating to me that it is working so poorly now when all I was trying to do was upgrade it a little bit.    Now it's performing horribly and it's only 6 months old.
I ran a four hour test on the hard drive and it is fine. I ran all the system clean ups, optimizations, registry cleanups, windows disk cleaner, defragger and virus scans. Nothing is showing up as not working but there is CLEARLY a problem. It was never this slow.   And why is it STILL acting this slow even after I uninstalled all of the new hardware that made it start acting this way and went back to the original setup?
I'm trying to run a memory test on it now but the BIOS will NOT allow me to select another drive to boot from so I can't boot from the flash drive or CD drive to run the memory test. I have NO IDEA what to do next and I am starting to pull my hair out in frustration.
Please, is there anything that can be done to make it better again?
Any help would be HUGELY appreciated. Thank you!
Sincerely,
Jennifer

I totally give up!! I restored everything to the ORIGINAL state with drivers AND hardware and STILL everything is not working properly like it was BEFORE the upgrade.
So this has been the WORST experience with Tech support EVER!! I have spent DAYS on the phone for HOURS with these technicians and nobody seems to know what they are doing. They put me on hold every 10 minutes and are gone for 10 to 15 minutes and when they come back, they seem all set on a new solution but when you ask them questions about it, they have NO CLUE how to answer and then they put you on hold again. Nothing gets solved and after HOURS on the phone, I just tell them to stop because we are getting no where but running around in circles that make no sense. THIS A NIGHTMARE!!
So I totally gave up on being able to upgrade this machine. To any future buyers, I STRONGLY recommend you do all upgrading BEFORE you get it home for the first time. Make sure you have your power supply and graphic card INCLUDED before you bring it home or you're mostly likely going to have a NIGHTMARE upgrading it later.    Technical support is a HORROR STORY and expect to be WAITING for LOOOOONNNNG periods of time both ON THE PHONE and ONLINE and probably ending up with NO SOLUTION in the end.
I've VERY upset with how this turned out!! I'm just gonna have to deal with the fact that my computer is permenantly messed up and NOBODY AT LENOVO knows how to fix it. So I'm stuck.
I decided to send back the new power supply and the new graphic card because of this nightmare with tech support. I put everything back to the way it was when I bought the computer and it is STILL acting up!! I just want to revert it back to factory settings .. INCLUDING THE BIOS... but Lenovo said I have to send the WHOLE computer back to them to do that. All I can do from home is restore from a point in the hard drive and that's not enough. I need a TOTAL CLEAN INSTALL. Everything needs to be wiped out and reset, not just restored to a previous restore point. I've done this multiple times and all it does is erase all the programs and stuff I put on the computer. The drivers and other codes are still the same. And then bugs come up and things get all wonky. I NEVER HAD THIS PROBLEM BEFORE I TRIED TO UPGRADE IT!!
I am NOT comfortable with Lenovo's "solution". I do NOT want to send my computer back to them for them to reset it with factory disks ESPECIALLY when they stated that they are NOT responsible for any damage in transport or otherwise. I have to buy extra packaging to make sure it gets there safely. They told me to use the original box and packaging, that is the only way they can be sure it will get there safe. Who has the original stuffing SIX MONTHS LATER?!?! I don't want to be sending my computer across the country to get jostled all over the place and have that add to the slowness of the hardware because it was jostled.
Can't I reset it from home? Can they not send ME the disks instead of me sending my whole computer to them?
I'm so incredibly frustrated with this. I hope somebody answers quickly and that I don't have to wait DAYS to get a response again.
I absolutely LOVED my Lenovo computer! And then I tried to upgrade it. BIG MISTAKE!! Now everything is totally messed up and Lenovo's customer support for technical problems is HORRID!!
Somebody please help. This is driving me crazy with frustration and totally breaking my heart. It took me a VERY long time to save up for this computer and it was my most loved possession. It was a reward for a lot of hard times and now it's all broken and acting slow. And it's only 6 months old.
Is there a solution to this very frustrating problem?
I just want it to go back to the way it was before.
And is there a very low cost KNOWN TO WORK WITH THIS MACHINE upgraded graphic card and power supply? Is there a very specific brand and make? If so, could you let me know what it is in case I try to upgrade it again someday?
Thank you for your time and for reading this!
Please have a FANTASTIC day today!!
~Jennifer~

HELP! Graphics Card

Similar Messages

Maybe you are looking for