HELP! Gray Screen & File Folder with Question Mark!

Hello!
If anyone can offer suggestions or if you've dealt with this before I would love feedback so that we can fix this problem!
I recently converted my husband from a PC user to a Mac user (it was a happy day). A little over 1 month ago we bought a brand new 20" iMac and since then everything has gone quite smoothly, he's even said how happy he is with the switch!
Then yesterday morning as I lay sleeping in the other room a noise similar to dial up internet woke me. I went into the office to find the internet up on the screen of our iMac, Firefox wouldn't shut down so I tried force quitting, but that too did not work. Finally I pushed the power button, and went back to bed.
A few hours later as I went to check my email I powered on the iMac and got a gray screen. Nervous, I turned if off, and then back on in safe mode. I still got a gray screen but now with a file folder with a question mark inside flashing at me. Thankfully we're within the 1yr. warrenty so we took it back and they're diagnosing the problem....but I'm worried about the outcome.
Has anyone else had this problem? What was the result? What caused it? We save most everything onto external hard drives (thankfully!) so it's not as if the machine was being overloaded. It kept making that weird dial up noise too... kind of a bleeb, fans running, trying to work noise. Obviously my husband isn't so thrilled with Macs now. Any help would be greatly appreciated!! Thanks!

Welcome to Discussions - you have an intel iMac, and this is the PPC G5 forum, but even so, I would first advise you to buy Apple Care before then first year of ownership is up.
Then, I would remind you that all electronics will fail at some point, but the exact point is unknown and sometimes is much sooner than it should be. It would be interesting to hear from you what the exact failure was, there do not seem to be many reports of intel power supply failures, that seems to have been fixed since the era of the G5s.
The flashing question mark is usually a sign that the hard drive has failed and drives can fail at any point, yours may simply have some bad sectors; it could also be the logic board and again, they fail, but usually not within the first three years. Your machine may have been defective to begin with, it certainly doesn't sound as if you have been abusing it, so do please let us know what the ultimate diagnosis was.

Similar Messages

  • Gray screen, flashing folder with question mark

    My macbook pro was working normal in the afternoon...  I closed the computer lid and returned a couple hours later to a gray screen & flashing folder with a question mark.  When I hold the option key down at startup I only get an internet recovery mode.  I plugged in my airport time capsule and was able to boot from it.  I used disc utility check and everything checked out ok.  I used my ESET NOD32 Antivirus and it checked out ok.  Finally, I went to start up disc and restarted my computer from the Mac HD.  This also worked without problem.  Afterwards I disconnected my airport capsule and restarted the computer as a final test.  Unfortunately I am back to the flashing folder with a question mark.  What do I do?

    See:
    A flashing question mark or globe appears when you start your Mac - Apple Support
    Seems like your disk is failling.

  • I powered up my macbook and there is a file folder with question mark on the screen flashing.  What does that mean?

    Powered up Mac book and screen showing file folder with question mark flashing? 

    A flashing question mark appears when you start your Mac
    Hope that solves your issue.

  • MacBook Pro flashes file folder with question mark and startup manager will not run

    My son's MacBook Pro won't boot (gets the flashing file folder with question mark).  When I try to open startup manager (holding "option" key during boot does not do it).  Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store.  Any further suggestions?

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Restarted and received a blinking file folder with question mark image.

    I left my computer sitting while I was working on homework long enough for the screen saver to come on (I'm not sure exactly how long it was). Earlier in the day, I had to force quit safari and then later it unexpectedly quit several times. While my computer was sitting, it looked like it does when it restarts. I waited until it started to come back up, and instead of coming up to the desktop, it came up with a blinking file folder and question mark. I had not done anything unusual with it, and had not tried to restore it. My dad was working on trying to fix it, and inserted the OS X disk. When the options came up, in the repair feature, the disk could not locate my harddrive. I was wondering if anyone else had encountered this problem, and if so how it was resolved. If anyone had any tips or ideas of things I could try that would be great. I can't really get it to an apple store soon, and I'm a student so my computer is very important to me. Thanks.

    Mornin' John,
    I also have an OWC external firewire drive that I tried to install OSX Tiger to but was told that I could not install OSX Tiger on the external drive.
    What Format is that Drive? GUID/MacOS Extended? It should work if the right format.
    Is there any way to run Disk Warrior from the external hard drive ... to try and rectify this issue, or at least get my data off the dead drive (if it is so)?
    From the external only if you can get OSX installed.
    What version is it? Do you mot have the CD?
    or from my PowerBook G4
    Possibly, with the MaBook in FW Target Mode
    http://docs.info.apple.com/article.html?artnum=58583
    If DiskWarrior can't fix it, you might try Data Rescue II...
    http://www.alsoft.com/DiskWarrior/
    http://www.prosofteng.com/products/data_rescue.php
    (Has a Free Demo to see if it could or not, but you'll need another drive to recover to).

  • Cannot get into mac. I get a white screen and flashing file folder with question mark inside. What can I do?

    2012/13 MacBook Pro froze up, so I did a hard shut down. Now, when I try to start up, it makes 3 unusual beeps, then I get a white screen. After a couple minutes, a flashing file folder with a question mark appears and remains. What is wrong and what can I do to fix it.

    Three beeps usually means a RAM or RAM slots problem. The Question Mark means there is no bootable system found.
    A flashing question mark or globe appears when you start your Mac
    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark or globe appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Large file folder with question mark is flashing on screen.

    Just turned on computer for the first time and a large file folder with a question mark is flashing on the screen. I am unable to do anything and have restarted and it does the same thing.  Please help!

    It does this when it can't see the operating system. You didn't give much information but I'm assuming it's a brand new mini and you aren't using any external drives for the operating system. If that's the case then yes, reinstall OS X. Put your install DVD into the optical drive and reboot. As soon as you hear the chime, hold down the "C" key on your keyboard (or the Option key until the Install Disk shows up). That will force your Mac to boot from the install DVD in the optical drive.
    If reinstallation isn't possible, or if the problem continues after reinstallation, then you need to exchange it for another, because something is keeping the operating system on the drive from being read.

  • File folder with question mark, file folder with question mark

    Battery died went to turn on computer with adapter plug...
    white screen with flashin file folder with a question mark???
    How do i fix this?

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • File folder with question mark.....

    In the UK, I do not have the back up disk, i am getting the file folder with the question mark. Anyone know what i can do?

    OS X version?
    Read here:
    http://support.apple.com/kb/TS1440

  • File Folder with Question Mark: Hard Drive Failure?

    I did a search on this topic in these forums, so I think I know what's going on but want to confirm:
    I shut down my MacBook Pro this morning and tried restarting it but got a blinking file folder with a question mark. Tried to restart from Disk Warrior (pressing C while restarting) but got the same thing.
    Does this mean my hard drive has failed and there's no remedy I can try myself?

    The flashing question mark is usually a sign that the hard drive has failed and drives can fail at any point, yours may simply have some bad sectors; it could also be the logic board. It should boot from the DiskWarrior disk though. Try again.

  • How do I get rid of file folder with question mark at startup?

    Following a force quit, at startup I get, first the startup audio followed by a profile of a file folder with a question mark on it.

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • Desperate, won't boot. Screen shows file folder with question mark??

    I'm out of applecare warranty. My PB G4 won't boot. All I get is a gray screen with a small file folder in the center that has a question mark alternating with a little smiling face. Does this mean that my hard drive is fried and the system can't find my OS X software to boot from?
    Is there anything that I can do to remedy this? I'm desperate. This post is being performed with a Dell using Windows

    If the drive appears in Disk Utility then it isn't dead. That you cannot repair it nor install the OS suggests that there's serious damage to the directory if not the partition table. If you haven't backed up recently and have data you really don't want to lose, it might be worth getting DiskWarrior to attempt repairing the drive or retrieving some data. No guarantees.
    Whether you do try that or not, eventually it's back to rebooting with the CD and returning to Disk Utility. Click on the erase tab. Do you have that option? If not, click on the partition tab and select 1 partition scheme and try that. If you can erase or partition the drive you will, of course, have erased everything.
    If you succeed only time will tell if the drive went south because of a hardware issue or software. So, were I you, I'd become very careful about frequently backing up the important info on your computer.

  • White screen with file folder with question mark flashing?

    My iMac wont start. I get a white screen with a file folder. In the file folder is a ?, flashing.

    What operating system do you use? If you use Lion, boot in recovery mode (Command and R buttons) and open Disk Utility to see if your hard drive is detected, and if it's detected, click "Verify Disk". If you use Snow Leopard or early, boot from your install DVD, click "Utilities" and open Disk Utility to do the same as for Lion. It sounds like your Mac doesn't have a bootable device, so it could be a lot of things (hard drive broken or formatted, hardware error, etc.). If this doesn't work, reinstall your operating system

  • Flashing file folder with question mark

    Hello,
    i have a mid-2010, 15"' MacBook Pro running Yosemite.  Also, about two months ago, I replaced the two, 2 GB memory modules with two 4GB modules. Just in the past week the laptop has been acting very sluggish; login won't complete; and today, when first booting it up, I got a gray screen with a flashing "question mark" file folder. I've NEVER seen this before.  In all the years I've been an Apple fan and user, I've never experienced a moments trouble. 
    In searching for other questions similar to mine, I read to restart in Safe Mode, select Disk Utility, then run Disk Repair on the Macintosh HD volume; exit Disk Utility, and restart from the Apple menu in regular mode.  These steps worked however, once the laptop began restarting, it took at least 10 minutes to get to the desktop.
    I am considering backing up critical files and wiping the hard drive clean or restoring it to factory. I don't know if this is necessary or if it would rid the system of whatever it is that's causing these issues.  Also, I've not ever done this before so I don't know what issues I may encounter, or exactly what steps to take to accomplish this.  If such drastic measures are not necessary, suggestions as to what I can do to correct these issues are appreciated.
    Suggestions are welcomed.  Thanks in advance.

    That is a sign that the MBP cannot find the OSX.  Usually is is a failing HDD or a faulty SATA connection cable/
    Backup your data.
    Then boot the MBP in the recovery partition and select Disk Utility from the 4 option menu.
    Run Disk Utility>First Aid, Verify and Repair.
    If the Disk cannot be repaired.
    If the disk is OK, and the problem still persists, that points to the Cable.
    Take out the HDD and connect it externally via USB in an enclosure.
    If the MBP can be booted using Startup Manager, then the cable is probably faulty and should be replaced.
    https://support.apple.com/en-us/HT1310
    Ciao.

  • White Screen, Grey Folder with Question Mark and no USB

    Hello
    I have a iMac, that is in a classroom of similar machines, they are running os v 10.4.6 (ish).
    The mac in question had been reported with a fault so i went along to check it and this was a new fault for me.
    When the mac boots, it bongs the hdd starts up and then a black white screen appears after a few minutes this changes to a white screen with a flashing grey folder with a question mark.
    now reading on the forums, internet etc. i have found that maybe i should boot to disk. tried this but not disk activity.
    next i read to boot into verbose mode at which point i find that the USB ports dont seem to be running so i can use a keyboard.
    Anyone any ideas how i can troubleshoot this problem or why the problem occurred in the first place?
    Thanks for any help offered.

    This error indicates either that the internal HD has physical problems, or there is corruption on the drive (a failing directory or corrupt system files). You should boot from the Mac's original installation disk, run Disk Utility from the Utilities menu and do Repair Disk on the internal drive. If this fails to recover the drive, you may have to reinstall the system.
    Matt

Maybe you are looking for

  • Some images won't load in Safari, iTunes, iBooks and App Store

    Since my upgrade to Mavericks, some images on Safari, iTunes, iBooks and App Store wont load some times. I can't figure out the source of problem, but I've tested all four apps and the same problem exists across all of them; I've also tested Chrome,

  • Urgent help please.. one of the jsp file is raising an error.. how to debug

    Following is the error raised from file cnytdsum.jsp. java.lang.ArrayIndexOutOfBoundsException: 4 at oa_html._cnytdsum._jspService(_cnytdsum.java:2263) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchR

  • How to define branches of a bank in oracle hrms

    Hi Im new to oracle hrms and i have a question regarding on how to reflect the different branches of a bank in oracle hrms.Is it through defining an organization for each branch ?Please advice Thank you regards

  • Accessing address in user exit EXIT_SAPMF02D_001 (create/change customer)

    Hi, I'm trying to access the address given for a new customer in user exit  EXIT_SAPMF02D_001. I need Street4, which is not available on the i_kna1 object, and therefore I'm trying to play with the i_addrhandle parameter. Can this be used with functi

  • National character set in file *.properties

    Do you know how to set national chafracter set in file with extention .properities? It is very comortable put all text in this file, but it doesn't display correctly. If I write something on JSP page (not from file *.properties) it displays in a prop