Help GTX 760 Hawk Problem?!

Hello there.
Recently I bought a MSI GeForce GTX 760 Hawk 2GB GDDR5, but I can't play games like Battlefield 4, Ghost Recon Future Soldier, Assassins Creed 4 Black Flag, etc, with Default Clocks. (games like, DotA 2, Diablo III, Fifa 14, Team Fortress II runs fine)
When I play, it's just crash the game and shut down to desktop with a message "X" of the game. I need to Underclocking to 1006mhz (-105) on MSI Afterburner (Default 1136) to play!
I arealdy tried everything, Core Voltage (Memory Volt, Aux Volt), Update Drivers, on Windows 7~8.1 but still happen!
Any solution for this? defect graphic card?
Sorry for english!
Config:
i7 4770 3.4@Ghz Haswell
Watercooler Corsair h80
8 GB Corsair Vengeance DDR3 1600MHZ
Asus Z87-K
SSD Sata III Kingston 128GB
1 TB Seagate Sata II
GTX 760 Hawk 2GB GDDR5
6 fan CoolerMaster 120mm
Corsair CX750 CP-9020015-WW 750W

Quote from: flobelix on 25-March-14, 02:18:26
Try the attached (101 is normal and 110 is the LN2 version)
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the desired file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the desired file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.
What you edited in this bios? equal the default clock/gpu clock? ps: I downgrade this on msi afterburner, my mistake if I sent it downgranded.
I'm creating a DOS Flash with HP USB Disk Storage but this is taking too long...
Sorry I'm New on modifying bios!

Similar Messages

GTX 760 HAWK problem

I bought a new video card last month. From my Hd4670 this was a big jump, but i only enjoyed my GTX760 Hawk just for 2 weeks. After i decided that my 22 inch lg monitor was too small for movies I bought a HDMI cable to connect my Toshiba LED display to my new video card. Everything worked fine the first night, but in the morning while i was watching TV something went wrong, smoke started going out from the tv and sparks from the back of my video card. The pc was turned off so i tried to turn it on and I realized that everything was functioning including the GPU but I had no signal on my monitor. The TV was dead, it didn't even start anymore. I took the products back to the stores from which i bought them and today the answer was: "The warranty was canceled because the products broke down because of your fault."
I was wondering, considering that in the plug where i had the PC and Laptop is working and i am using it right now, the pc works, the laptop works too, and my router that was with the tv in a separate plug also works what do you thing that could cause this and what should i do to next because o payed a little too much than i wanted for this two devices.

If the pc still works most likely an issue with the TV caused this. The answer from the shop is quite hilarious. From your report I can't see why the products should have "broke down because of your fault". If you haven't done any modifications to both devices or spilled water across them there is no explanation from the shop why the warranty should be void. For the vga contact MSI about it: >>How to contact MSI.<<

Help with Gtx 760 Hawk

I just purchased a GTX 760 Hawk today. I switched the BIOS to line 2, downloaded the latest Nvidia drivers, and downloaded the latest MSI afterburner beta version. I know that you can set the power limit to 185% but for me, it is stuck on 111%. I tried all of the settings, searched google, uninstalled and reinstalled the drivers and afterburner. Basically have been trying to figure this out for 4 hours and this is my last resort. Does anyone know what I am doing wrong as to why it won't let me set the power limit to 185%? I set to unlock voltage control and that works fine, but the power limit is stuck on 111%. Thanks in advance!

Yes I tried both line 1 and line 2. It wont let me change the power level. Also when I try to overclock the card past +20 core clock it will crash within about 2 minutes when running furmark or heaven. I tried uninstalling re-installing msi afterburner twice, tried uninstalling and reinstalling with a clean install of the nvidia drivers twice. I switched LN1/LN2 multiple times and restarted each time. I still cannot change the power level, and if I try to overclock it past +20 core clock it will crash. The card runs fine at stock settings and never gets over 50 degrees, I am also using a 750 gold standard PSU so It's not a power or overheating issue. I played a game at stock settings the card ran perfect, but when I try and OC it, even a little, it will crash while playing the same game. I would really like a solution to this to try to get this fixed so I don't have to return it.
S/N = 602-V300-01SB1308051501
Thanks.

No video signal with STD bios gtx 760 hawk

Hi
I have some problem with my gtx 760 hawk, i can't boot on std bios the card run but no image " no video signal "...but the LN2 bios work correctly
No oc / no flash the std bios has worked 1 week and since 2 days nothing.
frequency of std bios was Gpu 1111Mhz / Memory 1502
fequency of Ln2 bios is Gpu 980Mhz / Memory 1502, bios version 80.04.C4.00.2D (P2004-0010)
Card :
N760 HAWK
S/N:602-V300-03SB1309034256
system Win 7 64
Driver 335.23 nvlddmkm 9.18.13.35.23
Before ask a rma, i would like to know if u can help me

i had a driver crash after switch bios...need reboot my pc, after a second try it's ok but gpu z 0.7.7 tell me ( Bios reading not supported on this device ) when i try to save the file and the frequency no change
i post the Ln2 bios if that can help you
https://mega.co.nz/#!nlgXWK6Z!xZ-jfV6LX3lMLCNyPUfdqcgZOqc8b3fLrKHpj10MBNc
If the std bios is corrompt can i flash it from ln2 bios and hope solve the problem ?

Bios LN2 gtx 760 hawk doesn't run correctly

Hi everyone,
i am French. I bought a msi gtx 760 hawk in June 2014. The first bios runs correctly with overclocked frequencies. The second bios, named Ln2 bios to manage manual frequencies doesn't runs correctly. In fact, with msi afterburner, the powerlimit is locked to 111% versus 185% for its dedicated bios. It is a fresh install with nvidia drivers up to date. So, coud you help me to reflash the second bios ? I have an another question. When I flash bios, what position do I use ? (normal bios or ln2 bios). Bios are independant ?
Thanks a lot.
Have a good day.

Be aware that LN2 vbios is never factory overclocked.
Try the attached.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
NV300MH.101 is normal vbios and NV300MH.110 is LN2.
Then flash the desired file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

MSI GTX 760 HAWK low overclocking/core voltage lock

Hello, I bought the gtx 760 hawk and i tried to overclock it, but it's overclocking potential is very low. Furthermore if I change core voltage +12mV in afterburner nothing changes. Voltage is still stuck at 1.200. There's absolutely no difference. I use ver. 3.0.0 beta 14 of afterburner. Please help.

GTX 760 NVidia specs
Base Clock 980
Boost Clock 1033
MSI N760 Hawk
Base Clock 1111
Boost Clock 1176
That is what the card is guaranteed to prvide you with.
Additionally, MSI provides voltage and clock adjustments to allow users to potentially OC it even more (no guarantee). Each individual sample will yield different results. We have users that had to RMA cards because they were unstable even at the guaranteed OC'ed speeds.
Quote
I see in some reviews that they reach the power limit at the level of 185%
Review sites receive cherry picked samples that have been pre-tested and the results are indicative of what the best of the range may do. All the manufacturers try and have their best samples reviewed for obvious reasons.
The MSI Afterburner releases will be updated when Unwinder and the rest of the development team get around to it. Read the dedicated threads in guru3d

[REQUEST] UEFI GOP BIOS for MSI GTX 760 HAWK 2GB

I would like a UEFI/GOP BIOS for my GTX 760 HAWK, please.
S/N: 602-V300-01SB1307092650

Use the attached. .101 is normal vbios and .110 is LN2.
Decompress the provided .rar archive below with Winrar: http://www.rarlab.com/download.htm
Then flash the desired file included with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

Msi GTX 760 Hawk, i need some infomation please !

i saw review MSI GTX 760 hawk by guru3d but i dont know this card use which chip to control voltage eg: RT8802A or Chil 8318....
please can you show me which chip it used, sorry about my english, thank you very much!

i looked to see if i could find the answer, but it seems you will ahve to call MSI... sorry

No voltage monitoring AB beta 18, GTX 760 Hawk

I noticed something with Afterburner Beta 18, when I use the "extended MSI" setting, I will lose my GPU voltage monitor. I'm using the GTX 760 hawk, what gives? I'm at a loss..

Thanks. My N760 Hawk core is pretty much at the wall with the factory OC. Memory on the other hand can bench up to +550.

GTX 760 HAWK high-pitching sound?

Hello!
I have recently bought a MSI GTX 760 HAWK.
But there is an issue:
When the GPU is loaded at 0%, it makes a loud high-pitching sound.
When loaded not. I checked it with multiple programs sucbh as MSI Afterburner
Is this normal? I mean my old GPU did that too but then when it's heavily loaded.
The package(of the GPU) reads: "Minimal power supply: 500w(based on Intel i7)".
I have a 450w supply with an i5 CPU.
I calculated if the GPU is compatiable (without OC) and it is compatiable - just(I think +30-50 watts and it would'nt anymore) - .

I highly suggest replacing this psu as it is insufficient for your setup. A system with a reference design GTX760 already requires 30A on +12v and a 500W PSU minimum. Your split rail 450W psu (http://store.antec.com/Product/power_supply-earthwatts/EA-450-PLATINUM/0-761345-27450-0%20%20.aspx) just barely offers 30A (405W) in total across two +12 rails maximum. Hence even for a reference design GTX760 your psu is on the absolute limit and on the edge of shutdown (or death in longterm use). BUT your GTX760 is not a reference design card, it is a Hawk. Instead of the reference 980MHz Core (Boost Clock:1033MHz) it clocks 1111MHz Core (Boost Clock:1176MHz) or higher and therefor needs up to 4A more on +12v. Consider the sound of your psu as a cry for mercy.

[REQUEST] GOP/UEFI BIOS Update for MSI GTX 760 HAWK

Hello,
I'd like to request a GOP/UEFI bios update for MSI GTX 760 HAWK 2GB
SN: 602-V300-01SB1307104617
https: //drive.google.com/file/d/0B1-fBAUWkbq0MjAzbWM3Z3laUk0/view?usp=sharing
Thanks!

Quote from: livanu.razvan on 18-December-14, 05:21:18
Is there a tutorial on how to flash the new BIOS?
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the desired file included with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.
Quote from: livanu.razvan on 18-December-14, 05:21:18
Also, what is the difference between normal and ln2, or witch one is safe to use?
normal is the pre-overclocked default vbios. LN2 (which can be chosen via the selector switch on top of your card) is not factory overclocked but allows more extreme manual oc without the limits of normal vbios (more voltage and power draw allowed). This is especially needed for extreme oc like if using Liquid nitrogen (LN2) cooling for oc records.

GTX 760 Overheat problem

Hi, I have a problem with my gtx 760. Bought a whole new computer about 2 months ago with this graphic card but I seem to have problem with overheating. When I start up any game even on low graphical settings the fan just goes to full speed and the temperature climbs to 80C in few minutes, however on some games where I had this problem, such as fifa, it seems to go away when I enabled v-sync, the temperature hovers around the 40C mark. On other games even enabling v-sync won't help. My graphic drivers are up to date. Thanks in advance for any help and suggestions
MY pc specs:
Intel Core i5-4670 3.40GHz
8gb RAM
MSI H87-G43 Motherboard
2047MB NVIDIA GeForce GTX 760

Quote from: Dadioo on 08-November-13, 03:55:12
GTX 760, can't be more specific than that
Yes, you can: http://www.msi.com/service/search/?kw=N760&type=product

[REQUEST] GOP/UEFI GTX 760 HAWK 2GB BIOS

Hello ,
Would it be possible to have an up to date BIOS with GOP/UEFI support ??
Card : 760 HAWK 2GB
S/N : 602-V300-01SB1308067579
Requested files :
GK104.rom
rep.txt
Thanks a lot for your help.

It is possible
Use the attached.
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
NV300MH.101 is normal vbios and NV300MH.110 is LN2.
Then flash the desired file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

Tears and flickers when duplicated (GTX 760 Hawk)

I have a MSI Geforce 760 Hawk with two monitors, in DVI and my TV in HDMI. I duplicate my main screen (BenQ XL2411) and my TV (42LG3000) and extend my BenQ to my secondary screen (Acer H221SQL). Since updating to Windows 8.1 last week I have been getting tears and flickers on the BenQ when playing games. The picture is fine on my TV and it is fine when I don't have the BenQ and the TV duplicated. It was working fine before I updated to Windows 8.1 from Windows 7.
I have tried re installing the drivers to no avail. Any ideas?
Cheers

try different VGA drivers
the one from MSI web for your card

My GTX 760 Hawk

Thank you MSI for making the "Hawk" Lineup
http://www.3dmark.com/fs/1455312
http://www.3dmark.com/fs/1455304
Only request is that you start making lower end Hawk's. GTX 650 Ti Boost Hawk would have been an awesome card

i had a driver crash after switch bios...need reboot my pc, after a second try it's ok but gpu z 0.7.7 tell me ( Bios reading not supported on this device ) when i try to save the file and the frequency no change
i post the Ln2 bios if that can help you
https://mega.co.nz/#!nlgXWK6Z!xZ-jfV6LX3lMLCNyPUfdqcgZOqc8b3fLrKHpj10MBNc
If the std bios is corrompt can i flash it from ln2 bios and hope solve the problem ?

Help GTX 760 Hawk Problem?!

Similar Messages

Maybe you are looking for