Help! Guitar tones do not play...

The guitar tones screenset, from the new project menu doesn't produce any sound. I can access the same exact guitars from an empty project, but not from guitar tones. weird. I'm running logic 8.01, on a quad G5. I have 2 internal drives, with the audio and samples on the second drive. I initially thought that was the problem but now i'm not sure. Every other project seems to play fine. Anyone else have this problem, or any ideas how to fix? Thanks in advance.

Thanks for your fast reply. Sorry for the lack of info. Here is a list of things I've tried:
- using the finder to locate the original videos
- selecting the video, file, reveal in finder, original = 0.00 sec still frame
- opening with different programs; imovie, itunes, imovie video converter, firefox
- different household macs (as we are on "sharing")
- can't find them on hard drive or external hard drive back up device
- exporting them using "original" then reopening, still equals 0.00 sec still frame
When the image (video) is selected, the info states that it is a mpjeg, which I believe is a still image. Do you have any other suggestions on where to locate the originals on my macbook or how to convert them back to .mov?

Similar Messages

Assigned message tones do not play

8707g
The assigned tone for the messages folder plays. I disabled this as I thought it may be over-riding the tone set for emails and SMS but still they do not play. Am I to assume you cannot hear different tones for SMS and email folders?
I have asked this question on two other forums without any solutions to my problem so maybe members here know more.
I just wish I could sort this matter out with BB direct as the handset is only 5 days old and still no fix.
Solved!
Go to Solution.

hmm ok..
go to the profile icons and click on it, you should see here loud, vibrate etc..
scroll down until u see advanced and click on that.
highlight the profile u want to change and press the menu button (one with the dots on it) and then select edit.
Here u will see different things, like messages (with ur email accounts beside them) and mms and further down SMS text.
Highlight one and press it, then change the tone u want to hear for when u get a text message in the 'out of holster' part.
this should do it..
Hello from Perth!! Hope ur not getting affected by the floods..
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Ringback tone will not play

I bought a new ringback tone on October 1 and it will not play. I have set it as default, set it for all days, etc. and all I get is the Verizon classical thing. HELP!

Let's make sure that you can personalize your calls, k_u_jayhawk1998. Was the Ringback Tone added to your line through My Verizon with your phone number as the login? Were you able to verify that the default tone is not set for specific callers? Have you been able to use Ringback Tones in the past?
AndreaS_VZW
Follow us on Twitter @VZWSupport

Need expert help - iPod Classics will not play recently downloaded songs

Sparknotes version of this question, so you don't need waste your time if you aren't interested:
-iPod Classic skipping over songs
-problem with iTunes transferring the files
-need help ASAP, we DJ with these iPods most weekends
Multiple iPod Classics are skipping over songs and will not play them. This is a recent issue and these ipods are not new - we have been using them for several years now. The playlist and the Macbook from which the playlist came are also not new. The playlist copies onto the ipod so that i can see it on the device, but after unplugging the ipod and trying to play a song the screen just gets stuck for a few seconds, with the play symbol showing in the toolbar, but then skips to another song until it can find a song it can play.
After some investigating i found that my itunes must not be properly copying the playlist - it shows up on the ipod, but when i view the ipod contents in itunes, that playlist is not there. Upon a second attempt at copying the playlist to one ipod, i found that all files still show up in the song list, some files are now playable, but not all. My husband and I are DJs and one can understand that this is quite a predicament, when all of our ipods suddenly only play certain songs.
Restarting the ipod does not solve issue. Again this is an issue with multiple iPods, so i am thinking that maybe it is an iTunes problem but i don't know where to begin trying to fix it. One thing i did notice was that when i plugged the ipods, iTunes sat in the "verifying iPod" stage for quite a while. I found some past forums that touched on this but it seems to usually be connected to updating the version of iTunes, and i have the most current version (10.6.3). This playlist was made years ago and the files should not be corrupt, at least they have worked fine in the past.

I find this concept worth considering. http://en.wikipedia.org/wiki/Bathtub_curve
The one year limited warranty ought to see you through "early failures". I have a sneaky suspicion that extended warranties are intented to cover "random failures" before "wear out" failure becomes likely which is why such cover is often limited to 3 years, the period when it is least likely to be needed.
In your case, assuming there is no obvious physical cause that has been overlooked, it would seem to be a random failure in years 2/3. Not common, but they will happen to someone.
tt2

HELP!! Audio not playing from microphone recording.

Ok so i have a stop frame animation and have recorded audio for it using the built in microphone, i opened it up today and only 2 pieces of the audio are playing and the others are not. I need help quickly as it is in for tomorrow. When I show wavelengths there is nothing in the ones that are not playing.
Thanks liam

Audio files from iTunes wrapped in Fairplay DRM do exactly what you describe.

HELP! iTunes will not play music...

I recently had my hard drive replaced in my HP DV7 notebook. Im running windows vista (NOT by choice!!)
My laptop arrived with nothing installed. fortunatly I had backed up my iTunes library on my external HD. I reinstalled iTunes and all of a sudden a heap of music was dumped into my iTunes library
When I went to sync my iPhone 4 and my iPad1, the iTunes library was trying to override the music that was already on my iPad and iPhone. For some reason the music on my iPhone and iPad is different to that in my library, which I dont understand.
I have tried to bring the music from the iTunes backup over but nothing is working....
Also, none of my music in iTunes will play
I have googled and done everything I can find and nothing is working..... My music will also not play in windows media player either...
So my questions are: HOW can i get my iTunes library to be exactly as my iPhone and iPad are?
And
How do I fix my music so it will all play again?
I have turned off automatic updates and only do manual backups of the iPhone and iPad now as well as transfering my purchases manually but I am worried that when my iPhone is replaced next week, when I try to sync my new one, I may loose everything from my original iPhone backup (last backed up today)
PLEASE HELP!!!!!!!!!!

I could not update my windows drivers because my computer does not have Internet Exploder - I use firefox - and when I did finally find a place to access the different browser items, internet explorer would not download.
As for the drivers, according to the website, my drivers are way too out of date to update (they're from when I first purchased my computer back in 2003).
As for how I updated iTunes, apple update on my computer started automatically downloading it when i had itunes open the last time.
As long as I don't go to open itunes, music will play in musicmatch and realplayer and even through my DVD.
What it says is (and this is the last time it opened) it said something like: "iTunes is unable to open because the sound and audio drivers are missing". The other message that i got was along the lines of "iTunes will be unable to play because the sound and audio drivers are missing/damaged." and then it will open and you go to double click on a song and it doesn't even start playing.
I apologize if the message is not recognizable, but I had to unplug my computer and move it back home so it's been traveling this weekend and I cannot plug it in.

Ringback tones will not play

I have purchased new ringback tones since my others have expired but they will not play. I am using a Samsung Galaxy S4 and have never had a problem in the past with the ringback tones. I have it set up on a jukebox, which is set as my default. It's pretty frustrating that I have bought these tones but I am not able to use them. Any suggestions?

Are you on a shared plan? Did you log in to My Verizon using your own unique phone number and pasword? Each line on an account needs to have it's own separate login and password on My Verizon to purchase ringtones, ringbacks, and other services that will be used on that specific line.

Help! Audiobook will not play on iPhone 4s

I just purchased an audiobook in iTunes on my phone. I've been able to find the book on my phone but it will not play. When I click on the 1st track to start the book it just jumps to the next one and then back to the main screen without doing anything else. I have also synced the phone with my computer. It will play on my laptop but NOT MY PHONE.
This whole thing is just ridiculous. If I pay for something I want to be able to use it. Is there a way to fix this problem or to get a refund?
thanks

The first thing I would try is resetting the iPhone. Hold the home and power buttons together for 6 or 7 seconds till the Apple logo appears.
If that solves the problem, great. If not, the second thing I would try is re-synching the iPhone 5 using iTunes.

Help. Songs will not play!!!

My origional computers hard drive crashed and is no longer able to turn on. So I have a few thousand songs with a ! infront of them on Itunes, and as we all know these songs will not play. If I buy Match, will these songs with ! be converted and be able to be used again?

This is definately a firmware problem.
I have a 80gb ipod that does the same and narrowed the problem down to taking the headphones out and plugging them or another set in. It doesn't happen every time but happens often enough when you use it everyday like me. Like you I have a headphone jack for my car.
I replaced the ipod at the apple service centre after finally being able to replicate the problem for them to see. Unfortunately my new one does exactly the same.
The only ways around it are -
Do a reset
or
Hold down play so that it turns off. Unplug the headphones. Press play without the headphones in. The track will start playing. Plug the headphones back in.
Apple need to look into this problem as there are a fair number of people experiencing it.

Please Help this video will not play in firefox

Hi every one I really need some help i can not get this video
to play in firefox but it will play in internet explorer any help
or insite would be great.
http://expressadservices.com/altlogo3.html
Thanks

What kind of video is this and which plugin is used in IE to play this file?

Help with Flash Player- Not Playing

I recently went to a website where it said that i needed to
download the latest version of Flash Player. I followed the
directions and installed it, and the movie came up after
installation, but on the website it still said i needed to install
flash player again. I went through the other forum posts and tried
everything, but it still wouldn't show up. Then today i was on the
website and finally the video came up, but then when i refreshed
the page the video was gone and it again said i needed to install
the latest version of Flash Player. The video has shown up twice in
the past day, then says i need to reinstall again. I've tried
everything, but the videos just wont show up. Does anyone know how
to fix this for good?

JDB... your problems and solutions are different (and much
more complex). Read this CAREFULLY.
Printable, lovingly formatted versions of these steps, valid
as of 9/15/2007 are available. I recommend printing them and
following along with the print version:
.doc:
http://www.supportflash.com/bent/flash_player_ocx_troubleshooting.doc
.pdf:
http://www.supportflash.com/bent/flash_player_ocx_troubleshooting.pdf
The issue is this: You have multiple accounts on your XP
machine. One account plays Flash no problem, the other doesn't,
although both are Administrator accounts. Or possibly you have only
one account, and that account fails to play any Flash content. In
any case if you have ANY odd trouble with the Flash Player ActiveX
control for Windows as of September 2007, these should be your
steps. And yes, you need to do both sets of steps, in order!
The cause: This is usually caused by either or BOTH of the
following problems:
1. Leftover locked bits of an old Flash Player installation
2. Registry permission errors (aka 'ACL's)
OK so what do you do about this?
ONE: Identify possibly leftover Flash player bits
a. Open C:\WINDOWS\system32\Macromed\Flash folder.
b. Download the latest FP uninstaller from
http://www.adobe.com/go/tn_14157.
c. Run the uninstaller. If you get a notice saying you need
to reboot, then reboot.
d. Look at C:\WINDOWS\system32\Macromed\Flash folder.
e. Does any file ending in .ocx remain? (flash.ocx,
flasha.ocs, flash9d.ocx etc...)
e1. If no, then you don't usually have any leftover locked
bits.
You're done with this part of the problem, proceed to TWO.
e2. If yes, then that remaining .ocx file may be locked.
Right click it
and select properties and look at the version tab.
What is the version number?
f. Is the version number Flash Player 9.0.16.0 or earlier?
f1. Use the uninstaller instructions from this technote:
http://www.adobe.com/go/4da116d3
-- section "Flash Player 9.0.16.0 and earlier"
-- DO NOT re-register the uninstaller. ONLY do this
UninstFl.exe part.
Yes, you'll need to know how to use the command line to do
this. If you're not
comfortable with that then take your machine to someone who
is!
g. Is the version number Flash Player 9.0.28.0 or higher?
g1. Use the uninstaller instructions from this technote:
http://www.adobe.com/go/4da116d3
-- section "Flash Player 9 (9.0.28.0) and later"
-- DO NOT re-register the uninstaller. ONLY do this
UninstFl.exe part.
In both the D and E sections above you'll need to use the
specific name of the control that remains
in the C:\WINDOWS\system32\Macromed\Flash. So if you had a
stuck flash9b.ocx[DJM1] in the folder
and version was 9.0.28.0, your uninstall command would look
like this:
UninstFl.exe -u
c:\windows\system32\Macromed\Flash\Flash9b.ocx
That said, if you have trouble running these commands it
really is necessary to find someone who knows how
to use the command line, either a friend or a local
professional. Or spend some time learning about the
command line yourself.
h. RERUN the uninstaller you downloaded earlier. This should
get rid of the remaining (now unlocked) .ocx file and fix any
registry keys associated with it.
ALL of section "ONE: Identify possibly leftover Flash player
bits" is important. BUT this locked bit problem only happens on
maybe one out of 50 machines. So most people with installation
problems such as this are not going to have locked bits.
AND even after reinstalling you may still have continued
problems with Flash Player not being recognized.
Then we have to move on to section two..
TWO: Registry Permission Problems
We have been working on Flash Player failures caused by
Windows System Registry issues. We have not been able to determine
what’s causing these permissions to change. But that change
prevents the successful installation of Flash Player ActiveX
control (used by IE Windows).
Registry permission problems can be resolved using a tool
called SubInACL, built by Microsoft to correct system registry
issues.
Symptoms: What to look for:
1. If you install Flash Player on IE and are unable to see
Flash content on any webpage
2. After installation C:\WINDOWS\system32\Macromed\Flash
will have flash 9c.ocx in it but it failed to register
3. It appears that Flash Player installed correctly, but
unable to view Flash content
4. Flash Player works on other browsers, but NOT Internet
Explorer
5. If you are missing groups in HKEY_CLASSES_ROOT Advanced
Permissions
6. If you have run registry cleaners in the past, this may
have corrupted your system
Warning: The following solution involves the Windows System
Registry. Editing or manipulating the registry incorrectly can
result in serious system damage which may require re-installation
of the operating system. If you are not comfortable editing the
registry, then take your system to a professional. If you choose to
proceed, then it is essential that you create a complete system
backup and a Windows System Restore Point before proceeding. Adobe
Systems cannot be held responsible for damage resulting from this
information.
1. Select Start > Run
2. Type in “regedit”
3. Right click on HKEY_CLASSES_ROOT
4. Select Permissions
5. Select Advanced
For Vista
Compare your permissions with the ones in this screenshot.
http://www.supportflash.com/vista_key.png
For Window XP Pro or other flavors of XP
Compare your permissions with the ones in this document
“Troubleshooting system registry issues that prevent Flash
Player installation” (scroll down to the bottom of page).
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=kb400116
Notice any major differences, missing groups, incorrect
permissions?
How can you repair the System Registry, what's the fix
Download SubInACL from Microsoft to fix permission issues
that prevent the Flash Player Installation.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fb1634cb
NOTE: The Microsoft version of the .cmd script run by
SubInACL is not be run on any XP version other than Pro. HOWEVER,
the Adobe .cmd script in the above technote is tested safe for ALL
VERSIONS OF XP!!!
If you have a Windows System Registry permission issue that
sounds like the one described above, SubINACL may be the solution.
Please note that if you have this issue on multiple accounts on one
machine you’ll need to fix each machine individually.

Please Help My MBP is not playing DVD Movies

Hi since I updated from tiger to leopard my DVD player has a mind of its own.
When I insert a DVD movie it tries for 3 times and ejects the DVD out. If I try repeatedly then after 5 - 10 attempts it plays the Movies, but thats not the case always.
Any suggestions. Any advice is appreciated thanks
Dinku

I recently had a similar problem. I upgraded all of my software on osx. i tried burning a dvd, and it crapped out half way through. since then any dvd I put into it would try and read a couple times, and then eject. CD-R's worked fine. I had to take it to the apple store, and exchange it, which was kind of a pain (i had to back up using time machine, and restore using time machine.... but at least I got to test out the time machine feature. i like it. im inclined to start regularly backing up) i got home, restored my macbook, upgraded, tried burning a dvd.. it worked so i guess you got a defective drive like me. my model was GSN-10S or something like that.

Ringback tones do not play, still just ringing iPhone 4

I've read through the different questions and nobody seems to get the question answered. I subscribe to the ringback tone feature and purchased 3 ringback tones through the media store to put in a jukebox. I put the jukebox to the default field but when I call my phone number, all hear is ringing. I've had ringback tones on different phones and had no problems. Is this an iPhone issue? It shouldn't be this difficult.

You have to go under your Vzw account and that's where you would find how to fix it since it is online only to buy them or change them. Are you still paying .99 for the service? If you aren't then that's why you don't hear them. I thought hey lasted a certain amount of time.

IPhone not playing alert tone after switching off silent mode

Hi I have been having an issue ever since getting my iPhone 6 plus where when I take the phone off silent mode the alert tone does not play when I receive a SMS, iMessage etc. The phone vibrates but does not sound the alert tone, all other sounds work like lock sound, keyboard clicks and ring tone.
I have updated to the latest IOS 8.1.3 but the issue still seems to be happening.
I just had a chance now to troubleshoot and noticed that this has something to do with the volume control that you pull up from the bottom of the screen.
with the volume set to the minimum setting the alert tone does not play but it does play with the volume set mid-way or maximum. Depending on the volume setting depends how loud the alert tone plays.
I can reproduce the issue with these steps:
turn volume to minimum using the pull up menu at the bottom of the screen
set phone to silent using the switch on the left side of the iPhone
lock the screen
take the phone off silent mode
receive an SMS and the alert will not play.
has anyone else come across this issue? i never had this problem with my iPhone 5 and i always had the volume set to a minimum.

Hi Brenden_l,
It sounds like you are turning down the volume for alerts with the Control Center volume control, which is like turning them down with the side buttons.
Control Center - iPhone
Control Center gives you instant access to the camera, calculator, AirPlay, and other handy features. You can also adjust the brightness, lock the screen in portrait orientation, turn wireless services on or off, and turn on AirDrop. See AirDrop.
Open Control Center. Swipe up from the bottom edge of any screen (even the Lock screen).
You may want to change the Sound Setting to not have ringer and alert volume change with buttons.
Volume controls - iPhone
Lock the ringer and alert volumes. Go to Settings > Sounds and turn off “Change with Buttons.”
Take care,
Nubz

IOS 5 - New Alert Tones not playing

After updating to iOS 5, I purchased some new Alert Tones to customize my notifications (text, calendar, etc..), BUT the new tones will not play when my notifications pop up. I switched back to the default tones and it worked fine and I get the sound, but anytime I switch to any of my purchased tones I don't get any sound.
Anyone else experience this?

After messing with it for a while, I finally rebooted the phone and the sounds now work.

Help! Guitar tones do not play...

Similar Messages

Maybe you are looking for