Help! Hard Drive Does Not Slide Back In!!

Hi there,
After much troubleshooting, I've come to the semi-conclusion that my upgraded 2-year old hard drive (Hitachi Travelstar) has failed. Luckily - I have been keeping a cloned external drive that is the same exact size as my internal one. However - after I tried to slide back in the backup drive, it wouldn't go in. There seemed to be a block and I tried nudging it all sorts of ways. I thought perhaps there was something slightly different in the design of the newer drive (WD Scorpio Black) preventing it from easing back in. So I put my old drive back into the bracket with the intent of booting from the original external. But when I tried to put that in - it didn't go either!
Does anyone know if something inside the hard drive slot may have moved or is being blocked? When I push the drive in, the resistance is kind of soft, like it's nudging up against rubber. I tried looking in there w/ a flashlight, but it's hard to tell. I replaced the original hard drive - so I've done this before and didn't have any resistance whatsoever then. I've tried nudging it around. And I've checked several times (looking at photos, etc) to check that I'm inserting it back in the right way (exposed circuit board side face into bracket w/ label showing - face down on insertion).
If someone can please help me - it's greatly appreciated. I'm at a loss.
And just to be clear: I have a late 2006 white Macbook.
Many many thanks!

It sounds like the rubber guide bumpers (one or both) have become dislodged and are in the way of the hard drive being reinstalled (you are not the first person to have the problem).....you will need to extract the guide(s) or take it to a Genius....one person here used a paperclip as a hook to snag the guide and pull it out....do you have a small mirror to use to see in the bay (reflect a flashlight beam off the mirror).....be patient and careful...

Similar Messages

  • My backup hard drive does not have enough space for time machine to perform a back up even after erasing entire contents of bu hard drive

    My backup hard drive does not have enough space for time machine to perform a back up even after erasing entire contents of bu hard drive.  The hard drive has been in service for almost two years performing this function with no sign of failure.  How do I adjust time machine perameters?

    The only way to limit the size of the backup is to exclude data from the backup, which you can do in Time Machine preferences.
    If you use multiple browsers, have you tried clearing your browser caches? However, that's just a stop gap if it works. You either need to limit what you backup or get another drive.

  • External hard-drive does not reconnect after sleep

    Hi everyone
    I am trying to use my Energy Saver to SLEEP my iMac after 1 hour. It goes to sleep no problem, but on wake-up, my external USB hard drive does not reconnect. There is also an error message that I didn't disconnect the drive properly. I fear this may be one of Mac OS X's "features". Has anyone encountered the same thing?
    On a side note, I also find that my USB keyboard does not always reconnect as well. I use a windows USB mouse that I have connected to wake it from sleep, however my USB keyboard (the small one for Macs), sometimes does not allow me to type unless I unplug it and back in.
    Another point of note is that both the HD and the keyboard are connected to the iMac through a 7 port USB hub.

    r_dizzle wrote:
    Another point of note is that both the HD and the keyboard are connected to the iMac through a 7 port USB hub.
    I think this might be the issue. If the iMac is waking back up, it will likely be waking up this HUB, but the HUB might not be re-initialising the connection between OS X and the external drive or the keyboard.
    After waking the iMac, if you unplug the external drive from the HUB, then plug it back in again, does OS X pick it up again? Have you tried plugging the external drive directly into the iMac and then testing what the result is?
    If you read back on what you've said, you pointed out that you have a USB mouse that you use to wake the iMac from sleep. Is this mouse directly connected to the iMac? If so, it surely can't be a coincidence that a directly connected USB device can wake the iMac from sleep, but any USB devices connected to the iMac via a USB HUB cannot.
    I would suggest you test the drive as it is directly connected to the iMac. I would complete the same test with the keyboard too. I think you'll find it's the USB HUB.
    I hope this helps.

  • My external hard drive does not show up on my desktop

    My external hard drive does not show up on my dest top but, does shows in my Windows (vmware fusion) end although I can't see it ob my desktop but, I can eject it properly like any external drive. I have connected it to my windows and ejected properly (per the suggestion of someone on this forum) but, it still doesn't show on my Mac. I see the blue light and hear it running though. I have looked for it in disk utility but, still can find it. I have changed the cable and it still did not show on my Mac. I connected another external drive  and that showed up on my desktop.Any help????

    if it is NTFS then you need Paragon Software NTFS for Mac.
    NTFS volumes are suppose to be read only but in practice external drives don't always mount or work.
    If it is not NTFS then you need more details. Need more anyway.
    PS: this is not a MacBook area, it is Mac 65lbs tower related forum.

  • External hard drive does not shut down

    Hello, When my mini mac goes to sleep my samsung external hard drive does not shut down or dismount properly. when i wake computer i have a error message stating improperly ejected hard drive. It also does not reconize HD until I disconnect and reconnet??? PLEASE HELP Thank you

    My Mini was doing the same thing until I reset the PRAM. With four external drives. They would stop inadvertently with an "improperly ejected" error. Granted two of the drives went bad (6 and 7 years old) but a brand spanking new Seagate and a 3 year old Hitachi drive doing the same. Haven't seen the error since resetting the PRAM.
    If you don't know how to do that, Reboot while holding the Cmd+Opt+P+R keys until your hear the startup chime three times and then release the keys.

  • External Hard Drive does not mount

    My 2TB external hard drive does not mount and I cannot get it to.  Have tried turning the hard drive off and then back on.  No response.  Any thoughts as to how I can get it to be recognized?

    You can try doing a SMC reset, if it doesn't work the first time it's totally OK to reset the SMC several times.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • External Hard Drive does not work with Lion

    Hi
    My External Hard Drive does not work with Lion this message appears:
    NTFS-3G could not mount /dev/disk1s1
    at /Volumes/My Passport because the following problem occurred:
    /Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
    the MacFUSE file system is not available (71)
    can anyone help?

    Hi,
    See this Discussion:
    https://discussions.apple.com/thread/3191198?start=0&tstart=0
    Cheers,

  • HT3275 Time Machine says my external hard drive does not have enough

    Time Machine says my external hard drive does not have enough space for the current backup.  It needs 34 G out of a 250G hard drive.  All that is on the drive is earlier backups.  I recently added memory, which may confuse Time Machine into thinking it is a new computer.  How can I erase old backups and complete this one?

    Walter Goodman wrote:
    Time Machine says my external hard drive does not have enough space for the current backup.  It needs 34 G out of a 250G hard drive.  All that is on the drive is earlier backups.
    See #C4 in Time Machine - Troubleshooting. 
    If that doesn't clear it up, how much data is on your Mac?  If TM is only trying to back-up 34 GB, it should be able to delete old backups to do that (assuming you're running Lion).
    It sounds like your backups may be corrupted.  Try to repair them, per #A5 in Time Machine - Troubleshooting.
    I recently added memory, which may confuse Time Machine into thinking it is a new computer.
    If that's all you did, no.  
    How can I erase old backups and complete this one?
    Just erase the drive per #1 or #2 of Using Disk Utility.

  • Finder & Dock do not work - Mac Hard Drive does not appear on Desktop

    Until yesterday, my powerbook was working properly.
    This morning, I wanted to use it and I had the following problems after login.
    1/ My Mac Hard drive does not appear on my dekstop
    2/ My dock appears but no icon works when I click on them. So, I can't open finder. I have no response.
    3/ Furthermore, my top bar (with clock, login name, Airport icon...) appears but it is frozed.
    I try several solutions as :
    - rebooting in safe mode,
    - rebooting, with in the same time, hold different keys (option, apple, p & R)...
    As of today, no solution works.
    Thanks for your help.

    A.CHAMP wrote:
    Nota: if i used my daugther login (she is not admin), I have the same issues.
    Ok, that's good enough. You may be able to repair this with the 10.5.8 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    EDIT:
    I have around 5 Go space left on my Mac
    Also, your getting very low on disk space. Try to copy some of the data off to other media. *Do it before you try applying the combo, you'll need the space.*
    -mj
    Message was edited by: macjack
    Message was edited by: macjack

  • I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

    I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
    It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
    If anyone has any suggestions I would be happy to hear them.
    I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
    I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
    Anyone?

    Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
    The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
    I have my suspiscions about the drive but any help would be appreciated.

  • Ibook g3 hard drive does not show up after new installation

    I have an older ibook g3. I purchased a 20gb hard drive to replace the dead 10gb hard drive that came with the computer when I bought it new. The installation was fairly easy. After the hard drive was installed and everything was put back together I turned on the computer and loaded the install disk into the cd tray. The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
    Scott

    Hey Scott,
    The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
    When you're in the installer go up to the top menu bar under utilities? or tools? and start up disk utilities. See if you see the hard drive there. If so it might not be formatted correctly so erase it and format it for your install (usually Mac OS Extended (Journaled). That should make it show up.
    Richard

  • When transfering tracks across to ipod a sliding panel appears on the right hand side of itunes. after acknowleadging the transfer the panel does not slide back out of the way to alow another transfer.

    When transfering tracks to an ipod a sliding panel appears on the right hand side of itunes. This allows the selected track to be transfered. After registering this action the panel does not slide back out of the way to allow scrolling and more song selection. Any solutions..Help?

    I have an even simpler method. I use MyPublisher to print my books. I select their page layout for a two-page spread, drag and drop the image. DONE!  I understand that most people have their favorite places to have work done. I have been extremely pleased with MyPublisher.com, so I haven't even tried the book module in Lightroom.

  • External hard drive does not show up

    External hard drive does not show up in imovie.

    Hi,
    Welcome to the Discussions.
    The drive's directory is damaged and as you found Disk Utility isn't equipped to repair it. You need Disk Warrior or Tech Tool Pro.
    John

  • X102e - Hard drive does not boot into Windows

    Hi, I was trying to reinstall Windows on my X120e.
    I tried clean install with Windows 7 Professional, but the hard drive does not boot into the Windows once it has done the first phase of the install(you know, the copying part)
    After the restart done by Windows, it goes as far as "Starting Windows" but does not actually boot into the Windows.
    When I try to install Windows with another HDD, the device works well, but I can't swap the HDD because it is not 7.5mm think HDD.
    Is there any possibility the HDD will work trough any software-level process? The HDD works fine as external HDD when tested with external HDD adapter, and installs well. only problem is that it fails to boot
    Kim
    W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

    Thank you for reply.
    This is not exactly the issue. I was talking about the HDD originally installed in the PC.
    The PC successfully recognizes the external disk I used to install the Windows, but the problem was that I did not boot into the "First boot" screen, which basically works on the already installed data.
    As of now I have installed an SSD and is working fine. strange part is that HDD works just fine when I use it as an external HDD via adapter. Strange huh?
    Kim
    W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

  • HT201250 i have plugged in a hard drive into my macbook, opened time machine, but my hard drive does not appear. why?

    i have plugged in a hard drive into my macbook, opened time machine, but my hard drive does not appear. why?

    Look in the Utility folder which is located inside the Applications folder.
    You don't want to do anything with the disk on a PC if you want it to work on the Mac. They both use different formats.
    Allan

Maybe you are looking for