Help!! Hard Drive Won't Show Up when trying to reinstall Leopard!

I am having a huge problem with my early 2006 iMac. If I turn it off, I have to reinstall the Leopard software. I have tried using Disk Warrior to restore the hard drive, I run disk Utility to repair permissions and all I get is invalid key length, volume check failed Filesystem verify and repair failed. Now nothing shows up to Select a destination. What do I do? I have a couple of weeks before I can get a new desktop (waiting for tax return)

Hi Elizabeth Salcido;
From everything that you say you have done, it sounds like the disk in your iMac is going bad.
I certainly hope you have a backup because it sounds like you may very well need it soon.
Allan

Similar Messages

Cannot find hard drive in startup disk or when trying to reinstall OS X

I just wanted to double check to see what the problem would be before going in any repair place.
I have recently had a gray screen and obviously when ever I start it will go to the gray screen with a folder with a question mark appears.
I've gone to the OS X utility by pressing and holding option, but whenever I've tried to do any of the repairs such as:
reinstalling the OS X
going to startup Disk
It won't show any hard drive what so ever for me to even try and fix.
But when i'm in Disk utitlity it has the base disk0 and it verfies it and says its okay.
really confused and not that well informed with Macbook pro hardwire problems.
I think its just a HD fail. but I'm trying to see if there is any other possiblities.

Take the HDD out of the MBP and install it in an enclosure. Connect it to the MBP via USB and boot the MBP via startup manager:
https://support.apple.com/en-us/HT1310
If the MBP boots, you have a faulty SATA cable. If it does not, you will have to access the HDD via the recovery partition or the original install disks and run Disk utility>First Aid.
Ciao.

After installing snow leopard my external hard drive won't show up on screen or backup

Afer installing leopard my external hard drive won't show up on my desk top. It also won't backup my hard drive with time machine. I need help.

Try going to finder preferences, general, make sure show these items on desktop external disks is clicked. You can also go to sidebar (same pane) and click it there so it will show when you open your HD. Time Machine>system preferences>time machine>turn it off click select disk, make sure the correct disk is selected, the turn TM back on. Hope this helps.

USB external hard drive won't show up in Lion

My external USB hard drive won't show up in Finder, even though it's visible in both the Disk Utility, which says the drive is fine, and in Terminal.
How can I get it mounted? I have researched the issue and found no solution.It disappeared while I was downloading IOS6.
It has all my iTunes and iPhoto files!
Many thanks

I have a very similar issue. I have a seagate external usb drive 500 GB that is partitioned. One FAT 32 the other MAC OS Extended (Journaled). It has suddenly for no apparent reason stopped being able to mount the Mac OS volume. The FAT 32 vol. works fine. Disk Utility says that it is fine when I do a repair or verity etc. When I click on mount, it won't work. It says mount failed. Try running First Aid on the disk and then retry mounting. Same thing happens once that is done. ??????Any ideas?????

I've been using Adobe Acrobat 7 for many years. I updated my full version of Acrobat 5 to get to 7. My hard drive crashed and I've been trying to reinstall Acrobat and it will not install. Adobe will not help because 7 is no longer supported. Does anyone

I've been using Adobe Acrobat 7 for many years. I updated my full version of Acrobat 5 to get to 7. My hard drive crashed and I've been trying to reinstall Acrobat and it will not install. Adobe will not help because 7 is no longer supported. Does anyone know where I can go for help?

You won't be able to install your original Acrobat 7 at all, or use your original serial number. The server which used to allow this was switched off.
But assuming you have a compatible system, like Mac OS 5 or Windows XP, licensed users of Acrobat 7 can download a replacement and get a replacement serial number.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

HELP! External hard drive won't show up in finder!

Last night, I was updating my macbook (from August 2008, still runs on leopard) and it needed to restart. I forgot to eject my LaCie Porsche 1tb external hard drive first and, when it rebooted, I got the error of death (aka "disk was not ejected..."). When connected to the USB port, the drive lights up, I can hear it spinning, but it won't show up in finder and I can't see it in Disk Utility to repair it (after the first error of death, the computer wouldn't even acknowledge that I had the drive plugged in). I've tried plugging it into the different USB ports and even on a different macbook, but no luck in getting the computer to recognize it long enough to use Disk Utility or DiskWarrior. Any tips on how I can get my macbook to read the drive again?

If the external hard drive is not showing up in Disk Utility when connected to two or more different computers, then the problem is with the hard drive, it is broken. Get a new one.

My external hard drive won't show up on my MacBook Pro

So, I'm trying to transfer my music from my PC to my MacBook Pro. I put all my music on an external hard drive, but for some reason when I plug it into my MacBook it won't show up on the desk top. I've already changed my preferences in Finder so that hard drives and disks will show on the desktop, but still nothing. I looked in utilities to see if the hard drive was there, and still nothing. The hard drive is a Toshiba and is fairly new, the light goes on when I plug it into my laptop, so I'm very confused. Can anyone help me with my predicament?

Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Boot into Recovery and launch Disk Utility. Is the drive recognized?
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

Hard drive won't show up!

I was having some problems with the computer running slow so I ran disk utility and it showed there was a problem and it needed to be started from a disk so the hard drive could be repaired. I started with the TechTool Deluxe that came with Applecare and had it test the entire system and repair it. It found a problem with the hard drive and asked to fix it. I let it fix it and went to restart and all that came up was the white screen and a black box. All fans came on and that was it. I restarted with the disk again and tested everything again and no trouble was found. I restarted again and the same screen came up. I started it in "Target disk mode" with an iBook and the hard drive did not show up. I started it with the OS X disk and went through the steps to re-install the system and there was no hard drive to install it to. I ran disk Utility from the OS X disk and it says "Invalid B-Tree node size. Volume check failed. Error: The underlying reported failure on exit. 1 Volume could not be repaired because of an error." in RED. Please Help. Thanks.
20' G5 no iSight Mac OS X (10.4.4)

Yes, I am trying not to lose all of my stuff, but when I go to install OS X from the disk, the hard drive is not there to install it to. The only time the drive shows up is when I use disk utility from the installer disk and it can't repair the drive. The only option that I can see is format. I am going to try Target disk mode again later today and see if I can retreive everything from the drive, that is if it shows up. I didn't show up the last time I tried that.

External hard drive is not showing up when attached by USB

My WD External Hard drive is not showing up on my iMac when i connect it by USB

Hi, does that mean it shows up some other way of connecting it?
Is it Bus powered or does it have AC power?

External Lacie Hard Drive Won't Show On Desktop

Hello,
I have a LaCie d2 Hard Drive Extreme with Triple Interface. I know this topic has been posted before but nothing seems to be working for me. The hard drive will not show on my desktop, but it does show up in the Disk Utility. It's there, but I can't access it.
I have disconnected the drive many times. I have repaired the permissions on both drives more than once. I have swapped cables between firewire and USB. I have tried shutting down everything, unplugging everything and waiting 15 mintues before turning everything on. (Three times) (I have tried turning the computer on before connecting the drive, no good. I tried again with the drive already plugged in, no good, and also tried turning the computer on, then plugging the drive in and turning it on.
I have another LaCie Hard Drive, The one that has the design by F.A. Porsche and is 250GB. This drive connects perfectly. I don't understand. Hope someone out there can help me out, take care,
Tom

has the Lacie HD been formatted by another computer?

External drive and hard drives won't show up

I've had off and on problems opening my Pioneer blu-ray burner and my two LaCie external hard drives on my MacBook Pro 4,1 running Snow Leopard. Now, I can't get them to open at all. The cables, the HDs and the drive are all fine on my desktop.
Any suggestions?

Do they show up on the device list in System Profiler? In Disk Utility?

My external hard drive won't show up on my macbook air, and my iPhone when connected won't show up as connected in iTunes, help

When I connect my external hard drive to my MB Air it is to recognizing it. It did 2 days ago and it is compatible I have been using it for a month now. Also when I connect my iPhone 6 to it, it won't show up in iTunes anymore......please help

Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Boot into Recovery and launch Disk Utility. Is the drive recognized?
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

My external hard drive won't show up on the desktop!!

Alright!
I bought a 250Go external hard disk at the same time as my alumnium iMac around september 2007. Since then I had no problems.
I also created partitions on my hard disk:
1 - Mac = Mac OS extended (Journaled) 202 Go
2 - PC = MS-DOS (Fat) 30 Go
When I turn on on my hard disk, both icons usually appear on my desktop but since yesterday, ONLY my PC icon appear.
I went in the Disk Utility and it seems that the MAC partition is always here but won't show up on the desktop. It's like it's become invisible or something.
Should I be worried? Because I use the MAC partition to back up all my files with Time Machine.
I find it annoying so anybody can help me out? Thanks!!

Patrick, I have same issue with my (Intel) MacBook's internal HD. Tried your Script solution but recv'd Systems Events ERROR "Can't set disk "MacBook HD" to true".
The (missing) HD is Boot Camp Partitioned and running Fusion. BTW, Fusion/WinXP will no longer open - "File not Found" error. Also, I didn't immediately notice the disappearance because my MacBook started booting from one of ext HD's (w/o me changing the startup drive).
Any ideas greatly appreciated. I haven't tried the Terminal solutions posted since I'm not Terminal savey.

New external hard drive won't show up in disk utilities...

I have a 2010 macbook pro 13" and just bought a 1tb toshiba canvio external hard drive.
The hard drive itself has a USB 3.0 hub running out of it and the specifications say that it needs to run into at least a 2.0 hub, which I have.
I know I will need to reformat the external drive to get it to work on a mac, but it won't show up at all when I plug it in... the drive starts spinning but there is no recognition by my mac.
Does anyone know what this is and how to fix it?

So far all MacBook users have been able to use this drive as a USB 2.0 by using a USB 2.0 cable with a micro usb connector (same as smartphones, Kindle, Nook) on one end. Connect the micro connector to the opening on the left side of the USB 3.0 connector on the Canvio - if you look closely you'll see that side is exactly like the USB 2.0 micro receptacle. That's all you need to connect as a USB 2.0 - the other connections are for USB 3.0 which no Apple system has yet (Dec 2011). Connect the other end (a standard USB type A plug) to your MacBook and it will work. If you want to use it for Time Machine, you'll have to reformat it. None of the supplied software will work with Mac You can read more at this thread:
https://discussions.apple.com/thread/3510032?start=0&tstart=0

External Hard Drive won't show.

I use a FreeAgent GoFlex (Seagate) Hard Drive, I've previously used it on a Dell computer without any issues but when i plug it into my MacBook Air the hard drive shows in finder but when i click on it it's empty, i've tried to make it compatible with Mac with the help of youtube and google but nothing works and i need this content on the hard drive for my school work like yesterday so if you know how i can fix this problem fast, please comment.

Honestly I've no idea, i've done so much with it today.. But if you have any clue on to how i can fix it just comment..

Help!! Hard Drive Won't Show Up when trying to reinstall Leopard!

Similar Messages

Maybe you are looking for