Help has stopped working

All of a sudden, my help menu has stopped working. When I click on it, a window opens, but it is blank. Has something become corrupted? Do I have to do a re-installation of the help menu?
Thanks for any feedback.

Christopher,
Troubleshooting Help Viewer by Dr. Smoke may be "Helpful."
You can also try this: FIXED: Help Viewer crashes or shows blank window, by Gulliver.
;~)

Similar Messages

PLEASE HELP!!! My 'Apple mobile device helper has stopped working'!

Today i bought the new 3G iPhone so i went online to download the new 7.7 iTunes software. Now when i go into my iTunes a Windows pop up appears telling me that my 'Apple mobile device helper has stopped working' and that it is diagnosing the problem. The thing is that it doesn't diagnose the problem, the same box just keeps popping up over and over again.
I am not very computer literate and have tried everything that i can think of but nothing has worked.
Please can someone help because i'm absolutely dying to use my new iPhone; i queued up from 6 am to get my hands on it! :0(

I'm just a simple user. I don't know how to fix it any more than any of the other posters with this problem. I've looked around in control panel, done some poking and prodding with services and processes, and can't find a reasonable way to stop the messages without completely hosing up iTunes. I know the messages are annoying as ****, and nobody likes the idea, but sitting around and doing nothing is sometimes a whole lot better then doing something that makes it worse. See if you can find a document from Apple that tells you how to go back to the previous version of iTunes. I've seen that course of action mentioned several times for previous releases of iTunes upgrades, so the instructions for it must exist in another forum.
I just think, from the number of posts, that Apple is going to have to get a fix out pretty quickly, because this error pretty much shuts down their products on the Windows platform. They can't afford to let it go on for very long.

"Mobile Device helper has stopped working" after installing most recent

OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
_*Steps I have taken :*_
I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
*The two messages that I continue to get when I open iTunes and connect my phone:*
1) "Mobile Device helper has stopped working"
2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
The most recent error message under "Problems Reports & Solutions" on my start menu read:
Product: MobileDeviceHelper
Problem: Stopped working
Date: 4/7/2010 3:42 PM
Status: Not Reported
Problem signature
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application Version: 16.691.14.1
Application Timestamp: 4ba3b8fe
Fault Module Name: CoreFoundation.dll
Fault Module Version: 1.550.17.21
Fault Module Timestamp: 4b8cb530
Exception Code: c0000005
Exception Offset: 0000db6b
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
This is the same message that I have received the last 10 times under Mobile Device Helper.
*Please PLEASE please*, does anyone know how to resolve this problem?
*Thank you SO MUCH for any insight.*
-signed, UGH!!!

Hi,
I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
Really frustrating and disappointing.

Mobile Device Helper has stopped working

I have just purchased an iPhone 3Gs, I have the lastest version of iTunes (9.1) and am operating on 32-bit Windows Vista using an Acer laptop.
First, the iPhone was not recognised - so re-installed iTunes, downloaded Service Pack 2 for vista, reinstalled iTunes. Did't work. Finally found a forum that lead me to delete a problem file for Acer laptops (can't remember its name now) but then my iPhone was now recognised!
Secondly, tried to sync my windows contacts (all my old contacta list from old phone) then had syncing problems..through more forums that error message stopped but now I have a new one that I can't get past...
'Mobile Device Helped has stopped working' comes up repeatedly and will not let me to anything with iTunes as it freezes until I end task in Task manager.
I have looked into other forums that talk of deleting the Apple Mobile Device, but it doesn't seem to me to be the rigt decision as the majority of people have just had to reinstall iTunes as it wont recognise the phone without the file.
It seems that the new iTunes doesn't like Windows Vista.
Please can anyone help me get past this point before I lose the will to live!! (it's been over 5hours now!!!!)
Thanks

Sort of the same issue.
Windows Vista 64bit Home Premium.
I just launched iTunes for the first time after installing 9.1. When I connected my iPhone, iTunes told me that I needed to install a newer version of Apple Mobile Device, which entailed removing/reinstalling iTunes and AMD. I remember there being an order to which applications should be removed, so I did that, but got stuck at AMD. I wasn't able to remove it. There was no error message, it just automatically rolled back the uninstall process and quit. I did some research and saw someone recommend using the Windows Install Cleanup Utility. I used that to remove AMD, and it worked. Next on the list was Apple Application Support (?), which also could not be uninstalled by normal means. So I used WIC on that as well. iTunes, Bonjour, Quicktime, and Apple Software update I was able to remove via the Control Panel. I rebooted, reinstalled iTunes, and when it began the install process for AMD I got this message:
"Could not open key:
Unknown\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\3F55235DF871F046A8F862841205 6EF. Verify that you have sufficient access to that key, or contact your support personnel."
Got the same message for Apple Application Support. As a result, neither was installed.
Prior to doing any of this, I had disabled AMD in Services, which didn't help. I have since re-enabled it, and it is still running in Services, although it does not show up in the list on programs to uninstall.
After all this, I read in another forum that simply doing a Repair on AMD would solve the problem, but since I am unable to reinstall it, I cannot test it out.
Message was edited by: Zachary Prewitt

Adobe Dreamweaver CC 2014 Helper has stopped working

When I try to import an Flash SWF file created with CC 2014 I get an error that says Adobe Dreamweaver CC 2014 Helper has stopped working. Then I get the option to check online for a solution and close the program or just a second option to just close the program.
Any suggestions to a fix?

I insured that Flash 64 bit was installed on my computer.
This problem must have something to do with embedding a Flash file. I could not recreate the problem on other client's websites. I pulled all the Flash code and the problem went away. Of course I want to include a Flash file so it's still an issue for me.
CODE I PULLED:
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<script type="text/javascript">
swfobject.registerObject("FlashID");
    </script>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="100%" height="250px" id="FlashID" title="animatedDog">
            <param name="movie" value="dog.swf">
            <param name="quality" value="high">
            <param name="wmode" value="opaque">
            <param name="swfversion" value="10.1.0.0">
            
            <param name="expressinstall" value="Scripts/expressInstall.swf">
            
            
            <object type="application/x-shockwave-flash" data="dog.swf" width="100%" height="250px">
              
              <param name="quality" value="high">
              <param name="wmode" value="opaque">
              <param name="swfversion" value="10.1.0.0">
              <param name="expressinstall" value="Scripts/expressInstall.swf">
              
              <div><img src="/images/2014/noFlash.gif" alt="Missing Adobe Flash player" /></div>
              
            </object>
            
          </object>
         <br><img src="images/2014/sidePhotos/photo.jpg" alt=""><br>

RIM.Desktop Helper has stopped working

Hi there,
I just download Desktop Software v6 to my laptop HP window7 64 bit. when i installed, it open the WELCOME window and before i can press the Get Started button, it pop up another window saying RIM.Desktop Helper has stopped working and the windows is checking but after that it closed.
What should i do?
Many thanks

Hmm. That may be something in your calendar database is corrupt. Was your device ever synched before? There is a way of clearing the calendar database. So if you have your device synching with Outlook, after it's cleared from the BlackBerry, you could try synching again.
To clear the calendar database you can go into Desktop Manager | Backup and Restore | Advanced. On the right hand side select the calendar database and hit the Clear button. Afterwards try synching again
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Keep getting error installation helper has stopped working for readstep2

keep getting error installation helper has stopped working for readstep2

attach a screenshot of that error message, FAQ: How do I capture and post a screen shot or... | Adobe Community

Apple Mobile Device Helper has stopped working - stuck in loop

I keep getting a message/check box (AppleMobileDeviceHelper has stopped working)whenever I load iTunes under Vista. If I don't click and respond, my task bar gets cluttered up with these messages - I don't know what to do short of uninstalling everything.
Any ideas of what else I can do to stop this box from coming up, so that I can use iTunes normally?
Thanks

You could try uninstalling Apple Mobile Device support using add/remove programs. I tunes doesn't require it and will work without it. However if you need it, try doing a repair install of iTunes which will reinstall Apple Mobile Deviced support.

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Safari 5.1.5 on PC. Windows 7 64 bit. My favorite browser is not working. Please help. I keep getting a window in the middle of a page saying ''Safari has stopped working'''''

Hello.
My favorite browser Safari (5.1.5 ) has stopped working. Yes I know is on a PC. But is been very good to me for a long time, untill about two months ago. I keep getting a pop up message saying "Safari has stopped working" I will close the pop up message and continue working but within a few minute, the message will pop up again. The browser opens up fast as always and runs fine but the message is a pain and annoying. I'm running Firefox now , but I want my Safari back . Please help.
Jonasfromdc

Thanks. b noir. For the quick reply post.
b noir wrote:
Fingers crossed, your Windows 7 will have been recording some additional information about those.
First, open your Action Center and expand "Maintenance". Click "View reliability history":
Once the reliability report has been generated, look for Critical events for Safari generated at the time of the "Safari has stopped working" messages. Doubleclick the name Safari in the critical events. (Don't click View solution.) Here's a screenshot showing what to doubleclick:
You should see something that looks like the following screenshot:
Copy and paste the contents of the problem report into a reply here. For example:
Description
Faulting Application Path:          C:\Program Files (x86)\Safari\Safari.exe
Problem signature
Problem Event Name:          BEX
Application Name:          Safari.exe
Application Version:          5.34.55.3
Application Timestamp:          4f6ba239
Fault Module Name:          StackHash_7100
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          00000000
Exception Offset:          7d3a1240
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          2057
Additional Information 1:          7100
Additional Information 2:          710027e7a8d30022e5e0ee529f40121f
Additional Information 3:          5158
Additional Information 4:          5158ee4164428f7b514a5e7ee9654f7c
Extra information about the problem
Bucket ID:          2871481836
I generated the problem report similar to the above screen shot " by way of IE 9 " but will not let me copy and paste the contents as a screen shot in reply to your post here . Copy to clipboard did not work either. I might be doing something wrong. Oh well.
By the way , the only difference is- The Problem Event Name of mine is not BEX. but rather : APPCRASH. Fault Module Name : JavaScriptCore.dll. Fault Module Version: 7534.55.2.1. The rest are very similar to the above screenshot. If you need more information then I guess I have to do it all manually. Please let me know. Thanks again.
Jonasfromdc.

I purchased Premiere Elements 13 a few weeks ago, it downloads without issue, but I can't open it. I get an error message that reads "Elements 13 has stopped working" HELP!!!

I purchased this online, downloaded it without issue, and it won't open. I get an error message that states "Elements 13 has stopped working"
I have removed it and redownloaded it several times, and still no luck... HELP!
When I contacted Adobe support that's all they suggested, to reinstall...

taveliben
What computer operating system?
Uninstall, free ccleaner run through, and reinstall with antivirus and firewall(s) disabled is not a bad idea. But, let us look at some other
factors before that.
1. When you try to open the program, how far do you get....Welcome Screen - clicking on Organizer or Video Editor or other?
Have you tried to open the program directly from the Adobe Premiere Elements.exe file after you have applied Run As Administrator to that file?
2. Does the problem exist with and without the antivirus and firewall(s) disabled? Are you working in a school or company network?
3. Are you working with a pen and tablet device instead of mouse?
4. Is your video card/graphics card driver version up to date according to the website of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed and are you running the programs as administrator?
Let us start here and then decide what next based on the details in your reply.
Besides uninstall/ccleaner/reinstall, we may next try deleting the Adobe Premiere Elements Prefs file or the whole 13 Folder in which it
exists or installing the program in a newly created user account with administrative privileges and trying to run the program from there.
But, let us rule in or out the first 4.
Any questions or need clarification on any of the above, please do not hesitate to ask.
Thank you.
ATR

I recently updated my iTunes to version 10.3.1.55 and when i launch the program it says 'iTunes has stopped working' then another window pop up saying me to close program.HELP!!! ME PLEASE!!

ok i installed new iTunes version 10.3.1.55 and when i launch itunes it says 'iTunes has stopped working' i get to my problem history this is whay i found
Problem signature
Problem Event Name:          APPCRASH
Application Name:          iTunes.exe
Application Version:          10.3.1.55
Application Timestamp:          4deec351
Fault Module Name:          MediaToolbox.dll
Fault Module Version:          1.0.694.7
Fault Module Timestamp:          4ddeb575
Exception Code:          c0000005
Exception Offset:          00250000
OS Version:          6.0.6002.2.2.0.768.3
Locale ID:          1033
Additional Information 1:          fd00
Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
Additional Information 3:          fd00
Additional Information 4:          ea6f5fe8924aaa756324d57f87834160
PLEASE HELP ME!!!!

Fault Module Name:          MediaToolbox.dll
Fault Module Version:          1.0.694.7
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh...

I just received a refurbished replacement iphone and now while syncing I get "itunes has stopped working"...help???

I just received a refurbished iphone the the insurance provided by a major electronics retailer. Since i have tried to sync it to iTunes I have received "iTunes has stopped working" error. It says it will come back with possible solutions, but never does a thing. I have already removed and again installed iTunes, QuickTime, etc. to no success. Not sure what my next step should be.

This helped overcome the crash problem, but (as reported before), I still have to start iTunes in Safe Mode in order to watch any videos. This has been the case since 10.5.
The regular mode behavior has changed a bit - instead of the progress bar moving to the end of the video, showing no video but playing the audio for about three seconds, it now leaves the progress bar where it is ... but the rest of the behavior hasn't changed.
Windows 7 Professional, 64 bit on an HP dv8t quad-core laptop w/ 8 GB RAM, running nVidia GeForce 230M with 1 GB video RAM.
Thanks for your prompt response to the original problem posted above. At least now I'm back where I started from before I upgraded to 10.7. Not optimal, but I've finally gotten used to doing a Ctrl-Shift-click to run iTunes.
Scott

Need help with Photoshop and "Licensing for this product has stopped working" message. Adobe fix isn't working.

I am still using CS3. A while back I received an error: "Licensing for this product has stopped working" for my CS3 programs. I used the recovery program suggested by Adobe and was able to get Illustrator, Flash and Dreamweaver to work, but I still can't open Photoshop or In Design. I went back to the Adobe site and did every other trick they suggested to fix the error, but nothing has worked.
I then tried to uninstall photoshop from my CS3 suite (so I could reinstall) but got a JavaScript Alert: "Critical errors were found in set up. Please see set up log for file details." Seeing as I am not the best with the behind the scenes technical stuff, I have no idea what this means or where the set up log even is. Any help anyone can provide?
I have had CS3 installed on my computer for over a year. I started having problems about 4 months ago.

I am having similar problem. Can't open any of CS3 programs after trying to download Dreamweaver Trial, which wouldn't work because "couldn't remove DLM extention" error message. So now I can not run Illustrator, Photoshop, or even Adobe Reader. These are properly licensed for about a year. I get "License for product has stopped working". Have 2 pending cases open with Adobe support (one for Dreamweaver trial, one for license problem) since 8/3 with NO ANSWERS - It says answers within 1-3 business days. Was on phone support hold today for over 3 hours before line went dead with no help. What is up with adobe support? Can anyone help?

I keep getting the message itunes has stopped working I can't even open itunes I have tried uninstalling and installing, starting in safe mode but nothing seems to work. Please can anyone help me

I have recently bought a new laptop with windows 7 and when i have tried to install and open itunes i keep getting the message 'itunes has stopped working' itunes then shuts down before i can do anything to fix it. This happens every time I try to open itunes. I have tried uninstalling itunes and reinstalling it, starting itunes in safe mode. Nothing seems to work. Please can anyone help.

If and when I finally manage to open it, as soon as I click on a movie to watch, the message "itunes has stopped working" comes up.
Try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Help has stopped working

Similar Messages

Maybe you are looking for