Help! Having a problem exporting - iBooks Author tells me iTunes Producer is not installed, but it is... How do I fix this???

Hi,
I have finished a book, go through the "publish" process, it starts the export, but at the end gives me a warning message that iTunes Producer is not installed on my Mac, but it is, window open, logged in and all. The error message refers me to the iTunes page to download it, and that's that. I can't import the iBook file into the Producer (guess its not the right type of file).
I'm stuck! Help!
thanks
P

OsX Mountain lion 10.8.5, ibooks author 2.0 and producer 3.0
thx
P

Similar Messages

HT1420 I'm deployed overseas and my iTunes account will not let me buy music how do i fix this problem

I'm deployed overseas and my iTunes account will not let me buy music how do i fix this problem

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

I have problems syncing my new iPhone 5 to iTunes. I read somewhere to disable iPhotos and that has allowed me to sync but my photos are not on my iPhone. How can I fix this?

I have problems syncing my new iPhone 5 to iTunes. I read somewhere to disable iPhotos and that has allowed me to sync but my photos are not on my iPhone. How can I fix this?

Try updating to iPhoto 9.4.1. If it's not appearing in your Software Update yet, try updating using a .dmg installer downloaded from the following page on the Apple website:
iPhoto 9.4.1
From the release notes for the new version:
What's New in Version 9.4.1
Improves the reliability of syncing to iOS devices via iTunes
Fixes an issue that could cause iPhoto to quit unexpectedly when using the Export command
Addresses an issue that could cause iPhoto to quit unexpectedly when upgrading multiple books, cards, and calendars
Resolves an issue with downloading and viewing photos synced from Facebook albums

I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it say "! not delivered" in red mark.How can I fix this problem??

I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it says "! not delivered" in red mark.How can I fix this problem??

Perhaps something in this support article will help:
http://support.apple.com/kb/TS2755
Regards.

HT201209 I keep getting a 3212 error; iTunes cannot connect to the iTunes store, howver i have internet connection. How can i fix this problem?

I keep getting a 3212 error; iTunes cannot connect to the iTunes store, however i have internet connection. How can i fix this problem?

Hello achaie,
We've an article which details troubleshooting steps that can help get iTunes reconnected to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

How do I fix itunes error 45054. I cannot open itunes. Also saw message not enough access priviledges. How do I fix this problem?

How do I fix itunes error 45054. I cannot open itunes. Also saw message not enough access priviledges. How do I fix this problem?

Try here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

After exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

after exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
(note: remember what you changed it from so you can change it back later, before you import another CD)
Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

My new mac book air will not show old emails. how can i fix this problem

my new mac book air will not show old emails. how can i fix this problem

The answer depends on a number of factors, such as the following:
If you have more than one email account, does this problem affect one, some, or all of your accounts?
Where did you last see this mail -- in your Inbox(es)? in some other folder(s) outside your Inbox(es)? somewhere else?
How old is the missing email -- yesterday? just before you got the new computer? over a week? over a month? over a year?
How are you reading email -- with the builtin Mail application? with some other mail-reading application? with a web browser?
How do you access your email on the server -- IMAP? POP? Exchange? web browser? other?
What version of OS X is on your new computer -- Mavericks (10.9.x)? Mountain Lion (10.8.x)?
Did you migrate your data and applications from your old computer when you set up your new computer?
For example, if the missing mail is the mail that was in your Inbox before you got the new computer, you are reading it with the builtin Mail via POP, and you failed to migrate data, then the mail was left behind on the old computer. The same would be true if the mail was in "On My Mac" mailboxes and you failed to migrate data.

PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION AND 2008 MAC VERSION ON MY LAPTOP. HOW DO WE FIX THIS?

PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION AND 2008 MAC VERSION ON MY LAPTOP. HOW DO WE FIX THIS?

cherifrombartlett wrote:
PAGES COMPATIBILITY PROBLEM BETWEEN THE 2009 IPAD VERSION
What are you talking about? If I'm not not mistaken the iPad was released in April 2010 so there is no 2009 iPad version.
Typing in all capital letters in a forum like this is considered to be rude and all capital letters indicate that you are shouting.

HT4914 I bought itunes match and when trying to turn it on in my iphone 5, it tells me I am not currently subscribed... how do I fix this??

I bought itunes match and when trying to turn it on in my iphone 5, it tells me I am not currently subscribed... how do I fix this??

Welcome to the Apple Community.
Settings > General > Restrictions, make sure you are allowed to make changes to accounts.

I go to my settings and i change something and then i hit the home button and it wont let me go home. So i then try to turn my screen of and turn it back on to see if that will help. It will not shut off either. How do i fix this problem?

I have a problem! I go to my settings to change something and then i hit the home button to go home and it will not let me. So I hit the button on the top to turn it off to see if i can make it anybetter. My screen will not turn off! I tried to shut it off and it wont let me do that either. So now i am stuck in my iPod settings until my iPod dies. How do i fix this problem?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Images in my FrameMaker 10-sourced Robohelp Web Help project are turning out as blank JPEGS appearing as blank spaces in the final output. How can I fix this?

I'm attempting to create online help sourced from a FrameMaker 10 book using Robohelp 9 and Web Help (primary layout).
The text is interspersed with numeorus small icons which, in the FrameMaker documents, are .bmp images inserted into anchored frames in the lines of text.
Most of these icons were imported by reference into the FrameMaker book's chapters. Some were copied from another FrameMaker book and pasted into the present book.
Many of these images are turning out blank in the finished Help project.
Robohelp seems to convert these images into JPEGS.
In the source FrameMaker book, the images which appear OK in the Help project have Object Properties including: Facets: FrameVector JPEG ... Referenced File: No File
The images which appear blank have different object properties there: Facets: DIB ... Referenced File: (address of the image's source file)
How can I fix this and make all of the images appear in the Online Help?

Sorry, Jeff. I missed the key word in your instructions. Well, I did the import and still no luck. I'm getting the exact same results with the same images. (In some cases, I'm even getting hidden conditional text from the FM document body showing up in the image's frame instead of the image! See below.) This is bizarre behavior, but it's not new with the import. It is happening both in the linked and imported WebHelp with the same exact images. (Just another piece to complicate the puzzle.) So we have some jpeg images that are blank, and a few that are glitchy. From what I can tell, the commonality, besides the fact that all these new images are in jpeg format instead of gif format, is that all the blank and glitchy images are in a text inset. I'm beginning to think maybe RH just doesn't support text insets at all.
Arnis, I'll have to ask my colleague how she created the images next week when she's back from vacation. I have no clue if there are any differences between the jpegs and why some are showing up correctly. What do you mean by "compression type or level?" Are you asking about the resolution (high, medium, low) she chose when saving the images, or which program she used to do the screen capture and editing? (We have Adobe Photoshop CS5 and FM 11).
My next step is to copy-paste all the content from the text insets into my FM document (in the book I am linking) and re-render to see if that solves the problem. It will make single-sourcing impossible because I'll have to copy-paste the new content and images my colleague creates into my document each time we do an update, but oh well.
Here is an example of a glitchy image in RH:
And here is what it looks like in FM:
So bizarre!

Can't load my iBooks Author package into iTunes Producer

Hi I've written my book in iBooks Author.
I've used iTunes Producer to load
all the Meta Data about the book. (ISBN, author, number of pages, categories, pricing etc)
The Cover art, the screen shots
Had approved my banking and tax stuff
All that is remaining is loading the actual book
On the iTunes Producer Asset screen it says
"Click choose to select or drag your publication file, or just drag and drop it in the box. For books the file must be in EPUB or iBooks format."
When I locate the iBooks file of my book (it is an iBooks Author file) it is greyed out and I can't select it or when I drag it, it doesn't go into the box.
I'm using
ver 2.0 of iBooks Author
Ver 2.8 of iTunes Producer
Should I be converting it somehow?
When I tried using the Preview/ Publish button in iBooks Author it created a whole new file that was asking me to redo all the work I have previously done loading the meta data. Perhaps this is the only way, but then i can't work out how to add the Preview copy. It only loads the book.

I have had the same problem, and from the responses I have had to the question it seems it is universal with no way of getting publishing support. Very unhappy situation

Flash Animations and Movies are lagging after having played a flash game which was graphics intense heavy and frequently refreshed which caused lags, how can I fix this lagging problem for Flash?

On June 30th, I was playing a game called Lil Einstein's Manhattan project over at Newgrounds.com and the game although fine at first, later on in the advanced levels of the game, started to cause my browser to lag intensely and heavily. Now, when I try and watch other flash movies and animations, the flash doesn't run as smoothly, there are skips in the flash animations and movies, and it slows down.
I tried scan disks, I tried defragmenting my computer, I tried uninstalling and re-installing Firefox.. Nothing worked to restore the Flash.
But when I view Flash movies and animations on Internet Explorer, they run fine... but not anymore on Firefox.
Other Firefox users who have played this game also reported problems as well..
How can I fix my Firefox Browser and return the Flash running to normal?
== This happened ==
Not sure how often
== June 30th, 2010

If you have already scanned PC with an updated Anti-Virus and still the issue exists then I would suggest some troubleshooting techniques to resolve this problem:
Update browser
Remove unwanted Add-ons
Remove unwanted Tool-bars
Repair Registry
Repair ActiveX objects and shared DLLs
In case of facebook and Zynga I would suggest to Check for Problems with your Internet Connection.Try to Update Java and Reduce the Number of Running Internet Applications.
Sometimes Multimedia content lag due to Hardware Acceleration, so disabling Hardware Acceleration should fix your problem.
Open Flash Video in browser
Right click on Video Player | Settings
Open Display Panel
Uncheck Enable Hardware Acceleration
If issue still exists then you can find some more techniques described in detail here:
http://www.shockwaveflashcrash.com/Easiest-fix-for-shockwave-flash-plug-in-Crash.html

HT201401 my Iphone does not ring or vibrate. How do I fix this problem?

Hello Apple fam, I am having problems with my Iphone 3gs. My phone does not ring or vibrate and I don't know what the issue is with it. I love my phone and to ate to replace it with anything esle so please can someone help me resolve this problem the I am having with my phone. Thank you all and have a good day!

You might need to UPDATE the DRIVER for your iPhone in DEVICE MANAGER.
I searched quite a few Blogs and the answer below fixed my issue:
Windows 7 incorrectly identifies the device as a Digital Camera.
To fix this:
- Plug in your iPhone (don’t have iTunes loaded at this time)
- Go to Device Manager (Click Start, right-click Computer, then click Properties. In the window that appears choose “Device Manager” on the left)
- Scroll down and find “Apple iPod” or “Apple iPhone”
It will likely be under the “Portable Devices” category.
- Right-click the Apple device and choose “Update Driver Software…”
- Choose “Browse my computer for driver software” in the window that appears
- It will ask you for a location; you want to Browse to this folder (location is the same in 32 and 64 bit Windows):
32-bit and 64-bit: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
- Click Next
- It should find the driver for your device; let it install that driver
Once you complete these steps, reboot your computer. Once you reboot everything should work exactly as expected!

Help! Having a problem exporting - iBooks Author tells me iTunes Producer is not installed, but it is... How do I fix this???

Similar Messages

Maybe you are looking for