Help..having problem with MP3's on a X

<SPAN>I have just purchased an X-Fi Elite Pro, because of all the problems with the cracking and popping of my older Adugy card! Hope I didn?t waist that $400.00 bucks! It started having some weird loop problems when playing MP3?s through the Creative Media Source Player. It doesn?t do it all the time, but when it starts?I will need to reboot with the reset button to make it stop. If I catch it quick?I can get out of the Creative Media Source Player by Ctrl/alt/delete. When the loop problem happens it is at the start of a song that won?t play complete. Kinda like it starts the song and gets hung and keeps trying to start over and maybe one channel is ahead of the other?if that makes since! It almost has a phase shift effect to it, but if I am not fast enough and it plays that loop too long?I can't make it stop with out rebooting! I have not had any other problems so far and this has only happened in the Creative Media Source Player, but I have not tried Windows Media Player in a while!
<SPAN>
<SPAN>Mark

markpilkinton wrote:
<SPAN>I have just purchased an X-Fi Elite Pro, because of all the problems with the cracking and popping of my older Adugy card! Hope I didn?t waist that $400.00 bucks!
It started having some weird loop problems when playing MP3?s through the Creative Media Source Player. It doesn?t do it all the time, but when it starts?I will need to reboot with the reset button to make it stop. If I catch it quick?I can get out of the Creative Media Source Player by Ctrl/alt/delete.
When the loop problem happens it is at the start of a song that won?t play complete. Kinda like it starts the song and gets hung and keeps trying to start over and maybe one channel is ahead of the other?if that makes since! It almost has a phase shift effect to it, but if I am not fast enough and it plays that loop too long?I can't make it stop with out rebooting! I have not had any other problems so far and this has only happened in the Creative Media Source Player, but I have not tried Windows Media Player in a while!
<SPAN>
<SPAN>Mark
Just try another player st.
If same issues happens, then reinstall directx (latest), audiocodecs (pack like k-lite, ACE), creative drivers/software. Maybe SP2 reinstallation too.
Also check all audio settings (SR, Bitdepth, effects, buffers, ...) you have there (creative control panels (and windows panels too)).
You can also check if
- any hardware conflicts/IRQ sharing(s) there
- onboard audio is disabled and uninstalled (drivers)
- remains from Audigy installation (drivers, dll's, etc.)
jutapa

Similar Messages

Need some help - having problems with Dell Workstation BIOS not making all RAM usable

Hi,
I'm having problems upgrading the RAM in my T7400 workstation. I previously had 8 x 1 Gb modules and I'm now trying to use 8 x 2Gb (total 16 Gb). This fills up all 8 DIMM slots on the motherboard.
The replacement RAM is of the correct type, PC2-5300F DDR2, CL5, EEC Fully Buffered (same type as I had before). Each stick is also the same manufacturer (HP Micron), size, rank, timings etc. The problem is the BIOS won't recognise more than 8Gb as usable (it does detect all 8 sticks as it lists out all of the modules).
This is what I've tried so far:
Tested each module independently in DIMM slot 1 and it's recognised fine. (And I know all of the slots work, since I previously had 8 x 1Gb working ok).
I tried putting 8 Gb in DIMM slots 1-4, still only reporting 4 Gb usable (all modules detected).
I ran memory tests, everything checked out fine.
I reset the CMOS with the RTC jumper (suggested elsewhere on the forums).
I could find no bios option to remap memory.
Windows 7 Pro also shows 16Gb installed but only 8Gb usable (this is not an OS issue, since the BIOS is showing the same problem, before it even gets to loading Windows).
I haven't tried flashing the BIOS but I doubt this is the issue. I've been through the changelog of each revision after mine and it doesn't mention anything about fixes to memory detection (Also similar reports of my issue said upgrading the BIOS made no difference). I'd rather not mess things up when everything else runs smoothly and I'm very much out of warranty.
Of course, Dell won't help directly without trying to bill me for technical support.
Can anyone please suggest anything else I can try?
Thanks for reading.

Dimms that show half of the ram are High Density 4 rank and not compatible. Any ole Joes crab shack ram doesn't work. Only Specific vendors ram works. Buying ram based on a cheap price almost guarantees that its high density. High density modules have less ram chips on them and are therefore cheaper.
DDR2 PC2-5300 • CL=5 • Fully Buffered • ECC • DDR2-667 • 1.8V • 1024Meg x 72 •
HIGH Density Ram WILL NOT WORK.
http://www.crucial.com/usa/en/precision-workstation-t7400/CT3531857

Any help having problems with TOMCAT

*installed j2sdk1.4.1_03 to C:\j2sdk1.4.1_03
*installed Tomcat_4.1.24.exe to C:\Tomcat_4.1
MSDOS
*In DOS i set the JAVA_HOME environment vairable to C:\j2sdk1.4.1_03
*Changed directory to C:\Tomcat_4.1\bin
*typed startup
The following appeared
Using CATALINA_BASE: ..
Using CATALINA_HOME: ..
Using CATALINA_TMPDIR: ..\temp
Using JAVA_HOME: c:\j2sdk1.4.1_03
C:\Tomcat_4.1\bin>
Then another DOS window appeared and displayed the following
01-Jul-2003 11:26:38 org.apache.commons.modeler.Registry loadRegistry
INFO: Loading registry information
01-Jul-2003 11:26:38 org.apache.commons.modeler.Registry getRegistry
INFO: Creating new Registry instance
01-Jul-2003 11:26:39 org.apache.commons.modeler.Registry getServer
INFO: Creating MBeanServer
01-Jul-2003 11:26:42 org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on port 8080
Starting service Tomcat-Standalone
Apache Tomcat/4.1.24
01-Jul-2003 11:26:57 org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on port 8080
01-Jul-2003 11:26:57 org.apache.jk.common.ChannelSocket init
INFO: JK2: ajp13 listening on /0.0.0.0:8009
01-Jul-2003 11:26:57 org.apache.jk.server.JkMain start
INFO: jk running ID=0 time=0/220 config=C:\Tomcat_4.1\bin\..\conf\jk2.properties
*Far as i know the startup has executed fine.
*I then tested it by opening the URL - http://localhost:8080/
however the page showed the following:-
Connection reset by peer
Why is the URL http://localhost:8080/ not responding.
Any help id be grateful.......
L. Tambiah

I think you're not able to run tomcat propery. What you can do is that if it is tomcat version of 4.x or so search a file named start tomcat and stop tomcat they may be in your dir where you have installed tomcat or in the start menu and then run it from there then you'll see on your console window, will be some messages and it'll pause after some time don't close this window ok then again send request
http://localhost:8080/
I hope it'll work

PLZ HELP Having problems with a wrong installed msi utility program.

Hi,
My name is Nick
when I tryed to install a new update of msi fast boot, an error occured, now msi fast boot isnt installed correctly and i cannot find it anywhere to uninstall or to install again.
I used live update to install the new update.
These are my computer specs :
Operating System: Windows 8.1 64bit
Motherboard model: Z87 MPOWER (MS-7818)
Motherboard Bios version: 1.8
Graphic card mode: NVIDIA Geforce GTX 780
Graphic card Bios Version : NV296MS.131
Processor : Intel core i7 4770K @3.5ghz
Memmory: 16GB RAM
System Drive: Samsung EVO 250GB SSD

Uninstall the fastboot utility via Windows software menu. Afterwards install latest version: http://download.msi.com/uti_exe/FastBoot_mb.zip

HELP! having problems with the organizer of mediasourc

hi, i am currently having problems with the organiser view of the mediasource 5. the player view is ok. the explore panel keeps blinking and after a while the mediasource auto closes. this has not happened before during the past weeks. also, another weird thing is that previously when it didn't work, a microsoft error appeared. now it just closes without any message. hope you can help, thanks!
oh yar, anyway, whats the email adress of the email support?

What were you doing with the software when the problem occur? A detail step by step description of what you have done is useful.
i was playing music? haha...
first i opened the mediasource(organiser view), then, the explorer panel started blinking like mad... then teh thing auto closes, or a window pops up telling me that there is an error( the usual microsoft error...) then when i click don't send, the mediasource closes...
Did you connect any Zen MP3 player when the problem occur?
sometimes i did, sometimes i didn't. incidentally, do you have to connect an mp3 player to use mediasource?
What is the exact version of your MediaSource 5?
wait lemme check... 5.00.20
What is your operating system? What is the language of your operating system?
my operating system is windows XP, and the language is english.
hope my info has been useful...

Hi Can anyone help. I'm having problem with FaceTime on my IPAD .It connects but cuts out Simolarly when someone calls me it connects , then cuts out ThanksBrian

Hi Having problem with FACETIME on my IPAD Connects to call but then cuts out , similarly calls in connect & cut out Can someone help. Brian

My ipad is doing the same thing to it won't let me except a incoming call on Facebook and I don't know what to do

I'm having problems with my app, plants vs. zombies 2. It'll open and stay open for a few seconds then shut down. Help please.

I'm having problems with my app, plants vs. zombies 2. It'll open and stay open for a few seconds then shut down. Help please.

Check to see if there are Updates available... If already up to date...
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.

Was it purchased from an official Apple Store, not a reseller? Only Apple Stores sell official factory unlocked phones. The others sell hacked to unlock phones, and the unlocking is unstable.
Try these steps, as needed:
1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
2. Settings > General > Reset > Reset Network Settings.
3. Replace SIM card (and reset network settings again)
4. Restore Phone in iTunes using a backup
5. Restore in iTunes as new, without using a backup

Can you help I was having problems with my iPod so I restored it but I accidentally set it up as a new iPod is there any way to restore it from an old backup when I right click iPod in iTunes there isn't one anyway to recover one or find it on computer

Hi can you help I was having problems with my iPod so I restored it but I
accidentally set it up as a new iPod is there any way to restore it from an old
backup when I right click iPod in iTunes there isn't one anyway to recover one
or find it on computer

The following says how to restore from backup.
iOS: How to back up
If you go to iTunes>Preferences>Devices you can see if you have an iTunes backup. You need one dated before or the exact time you started the restore.

I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unable to do so with my iMac. This problem started suddenly and the error message i get is error 5.7.8. Please Help

I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unablesend any email with my iMac ( i can recieve email) . This problem started suddenly and the error message i get is error 5.7.8. I have read the threads on line and went into settings, even created a new profile, nothing helps...Please advice..is this something to do with my keychain Access?

As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums

I'm still having problems with XUL Runner - please help am getting desperate!

I recently sought help over a problem I am having with FF. When I try and load it, I get a message telling me that XUL runner 1.9.2.11 is not compatible with 1.9.2.12. The advice I received was to do a clean install. I have done this a number of times - using the Uninstall option in Control Panel as well as running the uninstall utility in the Firefox program folder. Each time I reinstall, and get the same problem. The only difference is that a few days ago I was installing FF 3.6.10, and that gave the error message that XUL runner 1.9.2.11 was not compatible with 1.9.2.10.
I have FF set as my default browser, so when I click on links in e-mails, etc. I get the same failure to load symptoms. However, I found by chance that FF works OK in conjunction with System Mechanic 10 - a maintenance utility I have on my machine. If I select the on-line help option from that Menu, FF loads and runs OK. I can open new tabs and have no problem loading other pages. However, even with FF open, if I click a link in an e-mail, I get the XUL Runner error message.
Although not all symptoms are the same, I am also having problems with IE8. When I run the program it loads, shows a 'connecting' message in the tab header, then closes. If I uninstall FF, then System Mechanic selects IE8 as the default browser, and as with FF, loads OK.
Chrome and Safari both run OK (thankfully). there must be someone out there who knows what this all points to - is that person you?!
Note: Trouble shooting information retrieved using FF when opened with System Mechanic.

If you have such problems then you need remove the Firefox program folder before installing a new copy of the full Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.

Having Problem with JSP In Netscape!HELP!!!

HI to all! I�m having problem with the jsp that i have :( If i use the Internet explorer it works but at Netscape... it doesn�t work :( The value of "PTE" is null... I need help !!!Please! I think the HTML IS NOT HELPING ...
the code is :
<html>
<head>

<title>BBVA - Transferências - Transferências OIC</title>
<LINK rel=STYLESHEET type='text/css' href="estilos/tablas.css">

<script language="Javascript" src="js/banner.js"></script>
<script language="Javascript" src="js/tp_oic.js"></script>
<script language="Javascript" src="js/utilidades.js"></script>
<script language="javascript" src="js/limpar.js"></script>
<script language="javascript" src="js/tiempo.js"></script>
</HEAD>
<body marginheight="0" marginwidth="0" leftmargin="0" topmargin="0" class="pag-contenido" onLoad="controlSesion();">
<%@ include file ="includecbtf.jsp" %>
<% String s = (String)datos.get("dt");
java.util.StringTokenizer str = new java.util.StringTokenizer(s, "-");
String anoServer = str.nextToken() ;
String mesServer = str.nextToken() ;
String diaServer = str.nextToken() ;
%>

<form method="post" name="captura" action="<%=urls.get("action")%>">
<center> 
<br>

<table border="0" cellpadding="0" cellspacing="0" width="500"> 
<tr>
<td colspan="3"><img src="images/linea.gif" border="0"></td>
</tr>
<tr>
<td width="250"><img src="images/traspasos.gif" border="0"></td>
<td width="82"><img src="images/titular.gif" border="0"></td>
<td width="169" class="fondotitular"><font class="texttitular"><%=datos.get("usuario")%></font></td>
</tr>
<tr>
<td colspan="3"><img src="images/linea.gif" border="0"></td>
</tr>
</table> 
<br><br>
</center> 
<center> 

<table cellpadding="3" cellspacing="1" border="0" align="center" width="500"> 
<tr>
<td class="cabeceratitulo" colspan="2"><p class="titulotabla">Nota : As Transferências para outras Instituições de Crédito decorrem de acordo com os horários da Compensação Interbancária, não se responsabilizando o BBVA pela sua realização fora das regras em uso.</p></td>
</tr>
<tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr><tr></tr>
</table> 
</center> 
<center> 


<table cellpadding="3" cellspacing="1" border="0" align="center" width="500">
<tr>
<td class="cabeceratitulo" colspan="2"><p class="titulotabla">Transferência Conta a Conta para outras Instituiçôes de Crédito</p></td>
</tr>
<tr>
<td class="formgrisosc" width="100">
<p class="dato">Conta Ordenante:  </p></td>
<td class="formgrisosc" width="300">
     <%
java.util.Vector v = (java.util.Vector)(datos.get("ListaCuentas"));
java.util.Hashtable elem;
java.util.Enumeration e = v.elements();
%>

<select name="conta" size="1" class="formgrisosc">
<%
while (e.hasMoreElements()){
elem = (com.ibm.dse.base.Hashtable)(e.nextElement());
String cuenta = ((String)elem.get("s_banco")).trim() + "-"+((String)elem.get("s_oficina")).trim()+((String)elem.get("s_dcontrol")).trim()+((String)elem.get("s_num_cuenta")).trim();
out.println("<option value=\"" + ((String)elem.get("s_tipo")) + "$" + ((String)elem.get("s_clave_asunto")) + "\">" + cuenta + "</option>");
%>
</select> 
</td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">Data de Processamento:</p></td>
<td class="formgriscla">
<input type="text" name="dia" size="2"class="formgriscla" value="<%=diaServer %>" maxlength="2" class="formgriscla"> /
<input type="text" name="mes" size="2"class="formgriscla" value="<%=mesServer %>" maxlength="2" class="formgriscla"> /
<input type="text" name="ano" size="4"class="formgriscla" value="<%=anoServer %>" maxlength="4" class="formgriscla"></td>
<input type="hidden" name="dact" size="2"class="formgriscla" value="<%=diaServer %>" maxlength="2" class="formgriscla">
<input type="hidden" name="mact" size="2"class="formgriscla" value="<%=mesServer %>" maxlength="2" class="formgriscla">
<input type="hidden" name="aact" size="4"class="formgriscla" value="<%=anoServer %>" maxlength="4" class="formgriscla"></td>
</tr>
<tr>
<td class="formgrisosc" width="100"><p class="dato">Moeda: </p></td>
<td class="formgrisosc"><p class="dato">

<select name="Moeda" size="1" class="formgrisosc">
<option value="PTE" selected>Escudos</option>
<option value="EUR">Euros</option>
</select> </p>
</td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">Importância:</p></td>
<td class="formgriscla"><input type="text" name="importancia" size="20" maxlength="15" class="formgriscla"></td>
</tr>
<tr>
<td class="formgrisosc" width="100"><p class="dato">Refêrencia:</p></td>
<td class="formgrisosc"><input type="text" name="ref" size="15" maxlength="10" class="formgrisosc"></td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">NIB Beneficiário:</p></td>
<td class="formgriscla"><input type="text" name="nibBeneficiario" size="30" maxlength="21" class="formgriscla"></td>
</tr>
<tr>
<td class="formgrisosc" width="100"><p class="dato">Descrição p/ Conta Débito:</p></td>
<td class="formgrisosc"><input type="text" name="debito" size="45" maxlength="45" class="formgrisosc"></td>
</tr>
<tr>
<td class="formgriscla" width="100"><p class="dato">Descrição p/ Conta Crédito:</p></td>
<td class="formgriscla"><input type="text" name="credito" size="45" maxlength="45" class="formgriscla"></td>
</tr>
<tr>
<td class="cabecera" colspan="2"><img src="images/1x1.gif" width=1 height=3 border="0"></td>
</tr>
</table> 
</center> 
<center> 

<table border="0" cellspacing="2" cellpadding="0">
<tr>
<td valign="top"><img src="images/limpar.gif" border="0" alt="Apagar"></td>
<td valign="top"><img src="images/continuar.gif" border="0" alt="Continuar"></td>
</tr>
</table> 
</form> 
</center> 
</body> 
</html> 
Thanks pepole!

thanks people! when i try to validate the action "PTE" he gaves me (if i put a ALERT...) null.
the js code is : (Moeda is coin )
//testa amount
// var ent = (f.amount.value);
var tamanho = f.amount.value.length;
var valor = f.amount.value;
decimals = 2; // Apenas pode ter duas casas decimais?
if (((tamanho == 0) || (valor == 0)) && ok)
alert ("A import�ncia tem de ser maior que zero.");
f.amount.focus();
f.amount.select();
ok = false;
else
     alert(f.Moeda.value);
if((f.Moeda.value=="PTE") && ok)
for (j = 0; j < tamanho; j++)
xx = valor.charAt(j);
     if ((!(xx.match(numeroER)) && ok))
alert ("O Campo Import�ncia deve ser num�rico inteiro.");
     f.amount.focus();
     f.amount.select();
     ok = false;
          //if para limitar valor dos Escudos
     if (ok)
     if (eval(valor) > 1000000)
     alert ("The field amount must be maxium 1 000 000 Pte.");
     f.amount.focus();
     f.amount.select();
     ok = false;
else
     if (ok)
          //function checkDecimals(f.amount, f.importancia.value) {
          if (isNaN(valor)) {
               alert("O Campo Import�ncia deve ser num�rico e como separador decimal, o ponto.");
               f.amount.select();
               f.amount.focus();
               ok = false;
          else {
               timeshundred = parseFloat(valor * Math.pow(10, decimals));
               integervalue = parseInt(parseFloat(valor) * Math.pow(10, decimals));
               if (timeshundred != integervalue)
               alert ("Apenas pode ter " + decimals + " casas decimais. Por favor tente outra vez.");
               f.amount.select();
               f.amount.focus();
               ok = false;
          if (ok)
          { //if to limit the value of the Euros
     if(eval(valor) > 4988)
alert ("The field amount must be maxium 4988 Eur.");
     f.amount.focus();
     f.amount.select();
     ok = false;
}//end of amount

Having problems with airplay from my ipod to apple tv can anyone help me?

Having problems with my Ipod trying to use airplay for apple TV does not show Icon Can any one help?

Have you looked here:
Troubleshooting AirPlay and AirPlay Mirroring

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

I am still having problems with my music videos freezing (all purchased from iTunes) since the update. Have restarted, rebooted etc. and it is worse than before. Help! Spent a lot of money on these and they won't play properly.

I am still having problems with my music videos freezing (all purchased on iTunes) since the update. The first day of the update, no problems...played 6 hours of music videos and no freezing. Today...every single video froze!!! So frustrating! I rebooted, restarted, powered down and no help. I would appreciate any suggestions. Thanks.

I don't know how to do this without using a mouse point.
This may help, http://www.computerhope.com/issues/ch000542.htm
As for question #2, you call tell how iTunes is sorting songs by the up or down arrow next to a header name.
Even the original order that the songs were entered or date added or last played can be sorted.
Much easier with a mouse or touch pad.

Help..having problem with MP3's on a X

Similar Messages

Maybe you are looking for