Help, HDR fail

Hi,
I'm running PS 5 extended 64 bit in windows 7. Merge to HDR pro doesn't work. I've tried to open files directly from LR 3.5, and also to open 3 files in PS and then merge open files. I've tried using both PS 32 bit and PS 64 bit- the same thing happens every time. I keep the layers panel and history panel on top so I can see the progress. This is what seems to happen. The merge begins, I can see the " untitled HDR" image tab and the actions appear in the history panel. The actions go pretty quickly but it seems that the last things that happen are align image, straighten, deselect, crop. Then the "untitled HDR" file disappears and I'm left looking at the tabs of the original 3 images I tried to merge. THis happens every time, Raw or Jpeg images, opened from PS, LR or directly from an SD card.
Any suggestions?? -- I have already updated Camera raw, PS and LR.
thanks

elpe0,
I am looking for the amps on the 3.3v RAIL and the Max Combined Wattage for the 3.3v + 5v RAILs. You can get them off the sticker on the Power Supply which looks like this:
Take Care,
Richard

Similar Messages

Error "Building boot caches on boot helper partition failed" when installing Yosemite

I Have a MacBook Pro 8,3 17" and have been running OSX Maverick 10.9.5 quite happily. I finally decided to bite the bullet and update to OSX 10.10.1. I went through the App Store and clicked install on the Yosemite offered there.
THe install took about 55 mins and then right at the end it reported: Building boot caches on boot helper partition failed, install failed.
now i can't boot normally or restore from my time machine backup.
can anybody suggest a fix?

Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Updating Adobe Community Help files fails every time after starting

Hello,
I e.g. go to «Support Center for Photoshop» from the menu within the app. Adobe Community Help starts up and tells me theres new content, do I want to download that. It seems to start the dl just fine, then reports an error «16882» (if I'm remembering it right).
Why? We have very fast very broadband internet connection and I use a 2011 27" iMac with max Gig RAM installed.
Any hints there would be appreciated.
Thanks!

Thanks, Mister Kapoor,
that solved my problem!
All the best to you, sincerely,
Olaf Mueller
Mit freundlichen Grüssen,
Olaf Müller
COMPLOT AG Multimedia Project, Gerberngasse 44, Postfach, 3000 Bern 13
Tel. ++41 31.313 30 33
Fax ++41 31.313 30 39
[email protected]
http://www.complot.ch
THE ULTIMATE PARTNERS
- RITTER KREATIV
Unternehmensberatung+Kommunikation,
integrales Marketing, Werbung, Promotion, PR
- Complot AG Multimedia Project
Interactive Solutions, Internet, Intranet, E-Business, CD-ROM, DVD, Hosting
- FOTarena
Studio-Pool für Foto, Video, Bildbearbeitung
Am 24.04.2012 um 12:30 schrieb Arpit Kapoor:
Re: Updating Adobe Community Help files fails every time after starting
created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
Seems Adobe Air or Cummunity help has gone cprrupt. Lets follow the below suggestions:
Step 1: Uninstall adobe air from Utilities and re-install the latest adobe AIR from "http://get.adobe.com/air/otherversions/"
Step 2: Follow "http://kb2.adobe.com/cps/842/cpsid_84215.html" and re-install the Community Help Air application.
Step 3: Restart the machine and launch adobe Community Help and try to install all the updates and check if it works fine.
Hope that Helps!.
Arpit
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4356729#4356729
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4356729#4356729. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

New to the forums, not new to Mac. Need help on failing hard drive.

Hello, glad to have found this forum...I need all the help I can get. Let me explain what I have, what it's doing, what I want it to do, what I "think" I need to do.
*What I have:*
733 G4 with superdrive, 512 MB SDRAM, 40 & 60 gig internal original hard drives
*What it is doing:*
For about a year one of the drives (seems to be my 60g start-up drive) has made clicking/popping noises not unlike when you click/cluck your tongue. I've ignored it, foolishly, and gone about my business. Then I began having to click the mouse and punch keys when I start-up in order to get the drive to begin spinning, otherwise it would never kick in and I'd get the "?" face. Anyway, I have been living like that for many months until recently when my start-up drive only had about 500MB left of space, I burned some DVD's and freed up about 6 gig on the drive for some cushion the other day. Well, since doing that, when I start up now I get a spinning globe. I have to hold the option key down at boot and then select the drive manually and I'm back to being fine again.
*What I want it to do:*
I'm freaked out about losing data because I am a photographer and graphic designer, so I would die if I lost any files. I have been using one of my old iPods as a back up drive to dump data on and burning some DVD's too...but still, I have most of my life still on the drive. Here is what I am considering. I would like to get an external drive to move and continue to grow my massive files for my work and creativity. I'm thinking the G-Tech 320 Quad external would be a good fit. Now, moving back inside, my 60g start-up is telling me it's failing and to back up and replace before...well, you know. My 2nd internal drive is 40g and is strictly my iTunes library of MP3s.
How do I save myself and replace my start-up drive?
Do I buy the G-Tech first, move all my files over, then replace the internal, failing 60g? Can I start-up from the G-Tech? Should I/Can I make my 40g the temporary start-up, replace the failing 60g, and go from there? How should I do this and must I get the G-Tech now?
While on this same question, I am getting conflicting information regarding how much my 733 G4 will recognize as far as each drive size. What is the max size each drive can be? What is the max combined?
*What I think I should do:*
I think I should buy the G-Tech, move my life over there, then use the working 40g as my start-up, replace the failing 60g with the largest possible when possible, make the replacement internal the start-up again, use or replace the working/existing 40g as storage/back-up, live happily ever after.
*And on a side note:*
I plan to drop two sticks of 512MB memory, this filling it up to it's max 1.5 gig of memory. Will this have a noticeable affect on my computer? If so, how?
Oh, and the reason I was opting for the Quad G-Tech is because can't I upgrade and add FW800 ports to my G4 rather easily?
Thank you for any time or effort you give me in helping me through this urgent matter. I had run out of places to go and people to ask before running across this forum.

First of all I cannot believe you have no backup strategy and only start to worry about it after problems arise. You're an accident waiting to happen. Before you consider anything make backups.
Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.
You can begin addressing the problems with your hard drive(s) after you get your stuff properly backed up. Once that's done get two larger drives for the computer and replace the small ones you now have. Your model should support hard drives up to 128 GBs in size. There is not specific limit on external drives so your external backup drive can be large enough to be partitioned into multiple volumes large enough to backup at least one of the internal drives (using the second internal drive as a backup for the first internal drive. This provides redundancy - an internal and an external backup.) You can then use the additional space on the external drive for your data files.
BTW, you risk catastrophic data loss by allowing the free space on your startup volume to drop below 3 GBs.

Help! Fail to Repair Disk

Hello all. I was booting into Single User Mode (fsck) and then later booting from the G5 Install DVD, using Disk Utility:
Disk Utility failed to repair the disk
This is what it says in the dialog box:
(after the line)
Checking catalog file
illegal name in red
The volume xx could not be repaired
Error: The underlying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error
Repair attempted on 1 volume
1 volume could not be repaired
Although there doesn't seem to be anything "wrong" with my G5 at the moment, everything seems to be running smoothly. I only found this out after Photoshop froze and I thought I wanted to restart and use fsck to repair the disk.
Should I start worrying? Do I need to erase and reformat the disk to reinstall??
Thanks and cheers
Background Info: PowerG5 Quad 2.5GHz, OS X 10.4.5

Hi, howwow.
1. This is generally not good news. See "Disk Utility reports "Underlying task reported failure" when repairing a volume."
2. Check the SMART diagnostics for your drive. You can check your hard drive with Disk Utility's built-in ability to use SMART diagnostics: see "Mac OS X 10.4 Help: Checking a hard disk to see if it's going to fail" and "Disk Utility 10.5 Help: Checking the S.M.A.R.T. status of your hard disk."
First, startup from your Tiger Install Disk (or Software Restore and Install disc if your Mac shipped with Tiger installed). Launch Disk Utility, then select the drive (device) not the volume(s) it contains in the left-pane of Disk Utility. For example, if the following were listed in the left pane of the Disk Utility window:
<pre>233.8 GB Maxtor 7L250S0
Macintosh HD</pre>The first line — 233.8 GB Maxtor 7L250S0 — is the device, i.e. the hard drive, and what you want to select. The second line, Macintosh HD listed below and indented from the first line, is a volume on that device.
If SMART diagnostics are available for that drive — and they should be for your Mac's internal hard drive that is its startup disk — you will see something like the following at the bottom of the Disk Utility window, below the left pane in which you selected the device: <pre>Disk Description : Maxtor 7L250S0 Total Capacity : 233.8 GB (251... Bytes)
Connection Bus : Serial ATA Status : Read/Write
Connection Type : Internal S.M.A.R.T. status : Verified
Connection ID : Device 0 "A (Upper)"</pre>The bit of interest is the S.M.A.R.T. Status field, if displayed.
3. If SMART reports that your hard drive has failed or is failing, your first order of business is to backup whatever you can.
If you have implemented a comprehensive backup and recovery solution, backup the affected disk. If not, see "Mac OS X: How to Back Up and Restore Your Files" for an emergency backup procedure you can use to backup your startup disk.
Once you recover your Mac from this problem, I recommend you implement a comprehensive backup and recovery solution. For advice on the backup and recovery solution I use, see my "Backup and Recovery" FAQ.
4. If the SMART diagnostics report the disk as Verified, after backing up your data, you can attempt to repair the disk using third-party utilities such as Alsoft Disk Warrior 3.x (DW3) and Micromat TechTool Pro version 4.1.x (TTP4).
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Help file fails to generate RoboHelp 7 and Word 2003

Hello, I am back again with a new struggle. I am creating a WinHelp4 file for an older application using Word 2003 and Robohelp 7. There are several different results regardless of whether I make updates, corrections, add jumps, change Topic IDs or do nothing when I click on generate:
1. sometimes it generates and works perfectly, just not very often, usually between 8 and 805am ET.
2. sometime it will generate an error: Failed to compile
3. another error: filename.rtf does not exist, but it is there in the folder
4. generates a Warning, but I don't know what the warning is as it does not show it
5. generates a blank Help with only a single glossary definition
6. not enough memory ( 1 gb is available)
7. corrupted file, rerun and it works...sometimes
I have:
1. Started over
2. Rebooted
3. Uninstalled and reinstalled RoboHelp 7 and all updates
4. Tried adding one item (jump, new topic, changed topic, updates to TOC, renamed anything) at a time and then generated file
5. Create an html from Word...I know silly but it worked some of the time.
I feel like there must be a setting error I missing or something hidden that I need to remove. There is something or a very big bug! I can't find anything and RoboHelp 7, Word 2003 and creating Winhelp4 files have been fine the last 2 months...now...not so fine.
Please help! I am so close to finished!
Thanks,
and if this isn't enough, I cannot generate a print to PDF either, but used to!

I wish I could try on a different PC. This is a government facility and that is not an option. There are only 2 of us who have RH and I think the other person may have left last week...what luck!
As far as anything else running, that is possible....I may try disconnecting the network and see if it will work...that should check it, right?
Background resources are very probable as their are virus scanners and who knows what else...my rights are very limited, no Admin rights to the machine.
It just amazes me that it has worked and now at the very final stage and updates it will not. I am in early when it usually works, 745a ET and it failed. These are the error messages and I usually get this type:
Warning - HC4004: datcap.rtf is not an RTF (Rich Text Format) file.
Warning - HC4009: The Topic ID "Data_Capture_Operations" specified in the Project files as the Default Topic does not exist.
What is odd, is they are both there and have worked consistently up until this recent failure....cannot complile.
I know this is long, but here is the notpad error:
Starting compilation...
WinHelp preprocessor 7.01.002
Compiling C:\Documents and Settings\jkmalone1\My Documents\My RoboHelp Projects\CRS On Line Help Individual\DATCAP\!SSL!\WinHelp_4\DATCAP.hlp ...
Preparing to create WinHelp...
Clearing output folder...
Filtering out conditional text...
Processing DATCAP.rtf...
Processing DATCAP.rtf...
Removing watermarks...
Processing DATCAP.rtf...
Collecting Topics' Information...
Processing DATCAP.rtf...
Removing broken jumps...
Finished preparing in 4 sec(s)
Generating WinHelp system...Microsoft (R) Help Compiler
HCRTF 4.03.0002
Copyright (c) Microsoft Corp 1990 - 1995. All rights reserved.
Datcap.hpj
HC4004: Warning:
datcap.rtf is not an RTF (Rich Text Format) file.
HC4009: Warning:
The Topic ID "Data_Capture_Operations" specified in the Project files as the Default Topic does not exist.
3 Topics
0 Jumps
0 Keywords
0 Bitmaps
Created C:\DOCUME~1\jkmalone1\Local Settings\Temp\RHTemp12\Datcap.hlp, 13,205 bytes
Compile time: 0 minutes, 0 seconds
0 notes, 2 warnings
Finished compiling WinHelp in 6 sec(s)
Compilation complete.
WinHelp (WinHelp 4) was built successfully:
C:\Documents and Settings\jkmalone1\My Documents\My RoboHelp Proj
There has to be something causing this...it ran quickly this am but failed with the above Warning errors. The file is not successful although it built a sort of Help...one definition of one word....and nothing else.
Suggestions:
Thank you for taking an interest...this has me so puzzled.

Please help me: Failed 8310 OS update to OS 4.5 via Desktop Manager

Hello BB Community,
As of this morning, I can't use my Blackberry curve 8310......for anything.
My problems started just as I was about to do a routine USB cable sync between my BB and Outlook.
I was informed by Desktop Manager v 4.7 that OS 4.5 is available.
I delayed the sync, and start the update process.
Everything............. except my BB restart and data reload.......... completed flawlessly.
Then a message says the update has failed, & the entire thing halts.
So, I wait a while then pull the USB cable & turn off the BB.
Turn on......the result was hourglass & white screen.
Removed & replaced battery....result was hourglass & white screen.
Restarted PC and connected BB...........result was hourglass & white screen & Desktop Manager does not recognise BB Connection, but Windows XP sees BB media minus folders.
Reinstalled Desktop manager....... still not recognising BB USB connection on the main screen.
Even though I have all the information saved in Outlook, I am getting desperate.
QUESTIONS:
Is there anything I can do to get my BB curve 8310 operational again?
Should I consider reloading an OS?
My phone is unlocked, so not sure if trying to download and reinstall an OS will LOCK the phone.
The unit's previous startup screen used to show a T-Mobile image.
Should I download the UK T-Mobile OS upgrade?
Blessed Regards,
2121311berry

Good luck, this will work... I have done it many times.
Be patient with JLCmder. If it does not work at first, keep trying, I have seen it take 20-25 tries before it "connected".
Try it with and without the battery inserted if you must.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Pls Help!-'Failed to open the file'

what do you do when an error 'failed to open the file' shows
up when you try to open something...?
i'm pretty sure that i am using the same version of flash as
the one i used before to create this file.. but just on a different
mac.
please
help!!!!　(ﾉ△･｡)

yumibobcat wrote:
> what do you do when an error 'failed to open the file'
shows up when you try to
> open something...?
> i'm pretty sure that i am using the same version of
flash as the one i used
> before to create this file.. but just on a different
mac.
> please help!!!!?(????)
>
If you are using the same version the file was made in then
the only thing
left which give such error is a corrupted FLA. Beyond
recovery once fail to
open.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Please help urgently Failed to deserialize statedump from server in Cluster

Dear All,
Appreciate a help on this urgently..... I am new to weblogic server & this technologies ... we created IPM,UCM,SOA clusters on one domain (my_domain), all the servers of all the clusters in 1st machine started .... but IPM server is not starting on the 2nd machine (other servers - SOA and UCM started on the 2nd machine)
I am getting the following error. could anyone help to solve this problem...
####<Jan 20, 2011 9:37:29 PM IST> <Info> <Cluster> <machine2.domain.com> <IPM_server2> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1295539649529> <BEA-000128> <Updating -2575471700288226143S:10.1.7.1:[16000,16000,-1,-1,-1,-1,-1]:my_domain:IPM_server1 in the cluster.>
####<Jan 20, 2011 9:37:29 PM IST> <Error> <Cluster> <machine2.domain.com> <IPM_server2> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1295539649554> <BEA-000140> <Failed to deserialize statedump from server -2575471700288226143S:10.1.7.1:[16000,16000,-1,-1,-1,-1,-1]:my_domain:IPM_server1 with java.lang.ClassNotFoundException: oracle.imaging.input.inputagent.InputAgent.
java.lang.ClassNotFoundException: oracle.imaging.input.inputagent.InputAgent
at weblogic.application.internal.AppClassLoaderManagerImpl.loadApplicationClass(AppClassLoaderManagerImpl.java:135)
at weblogic.common.internal.ProxyClassResolver.resolveProxyClass(ProxyClassResolver.java:68)
at weblogic.common.internal.WLObjectInputStream.resolveProxyClass(WLObjectInputStream.java:76)
at java.io.ObjectInputStream.readProxyDesc(ObjectInputStream.java:1531)
at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1493)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1732)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1947)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at weblogic.common.internal.WLObjectInputStream.readObjectWL(WLObjectInputStream.java:98)
at weblogic.cluster.BasicServiceOffer.readExternal(BasicServiceOffer.java:172)
at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1792)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1751)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at java.util.ArrayList.readObject(ArrayList.java:593)
at sun.reflect.GeneratedMethodAccessor3.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:974)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1849)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at weblogic.common.internal.WLObjectInputStream.readArrayList(WLObjectInputStream.java:116)
at weblogic.cluster.StateDumpMessage.readExternal(StateDumpMessage.java:53)
at java.io.ObjectInputStream.readExternalData(ObjectInputStream.java:1792)
when I check the error number BEA-000140, it says
Cause - Server failed to deserialize object since it does not have the class definition. This usually happens if your application classes are not deployed on all the nodes in the cluster. It is preferable to deploy beans to all the nodes of the cluster.
Action - Make sure all the classes are available on all the nodes of the cluster.
Could any one give steps as how to do this or the solution to this problem.... I am new to weblogic..
Thanks in advance.
Edited by: user599937 on Jan 20, 2011 8:32 AM
Edited by: user599937 on Jan 20, 2011 8:37 AM

This is definitely the problem:
java.lang.ClassNotFoundException: oracle.imaging.input.inputagent.InputAgent
The cause is likely that the configuration during installation of IPM went wrong somehow or the particular way you are starting the server is missing the IPM libraries. This is not so much a WebLogic Server issue as an IPM issue. I recommend you try posting in one of the Content Mgmt forums like WebCenter Content or open a support case with the IPM team.

Urgent Help: RemoteObject failed in iOS

I am current running AIR 3.1 with Flash Builder 4.6, creating an application that would make remoting calls to BlazeDS. For some reason, the emulator and the browser version of the application works, but as soon as it is deployed to iPad, the remoting stops working, and returns an error "Send Failed".
I wonder if anyone who may have experienced something similar, any help would be greatly appreciated.

I have experienced the same problem with Adobe's "Flex Test Drive for Mobile" tutorial. I can connect to a remote database using the iOS desktop simulator, but when the app is loaded on my iPhone/iPad, there is no connection. I have been trying for days to find an answer. If you know the solution, please post. Is there anyone from Adobe listening?

Pls Help! Failed to access local Session bean in 7.0!

Hi all,
Heard that to deploy local bean in weblogic 7.0, I need to put my war
file and ejb jar files in the ear file. My client servlet contains the
following:
AccessControlLocalHome accessControlLocalHome =
(AccessControlLocalHome)ctx.lookup("AccessControlLocalHome");
But it failed miserably with the exception
javax.naming.LinkException: . Root exception is
javax.naming.NameNotFoundExcept
ion: Unable to resolve
'app/ejb/AccessControlBean.jar#AccessControlBean/local-ho
me' Resolved: 'app/ejb'
Unresolved:'AccessControlBean.jar#AccessControlBean' ; r
emaining name 'AccessControlBean.jar#AccessControlBean/local-home'
Just got an idea that it might be my web.xml file. So I include the
following in my web.xml file:
<ejb-local-ref>
<ejb-ref-name>ejb/AccessControlLocalHome</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<local-home>com.spear.ejb.simorder.VendorOrderSLBean.AccessControlLocalHome</local-home>
<local>com.spear.ejb.simorder.VendorOrderSLBean.AccessControlLocal</local>
<ejb-link>AccessControlBean.jar#AccessControlBean</ejb-link>
</ejb-local-ref>
But it gives the following error:
Module Name: projects, Error: weblogic.j2ee.DeploymentException: Could
not setup
environment - with nested exception:
[javax.naming.NameNotFoundException: Unable to resolve ejb-link.
AccessControlBe
an.jar#AccessControlBean is not in the context. The context includes
the followi
ng link bindings: {} Make sure the link reference is relative to the
URI of the
referencing module.]
Pls help!
Thanks!
Innovest

<ejb-link> should be
<ejb-link> ../AccessControlBean.jar#AccessControlBean</ejb-link>
innovest wrote:
Hi all,
Heard that to deploy local bean in weblogic 7.0, I need to put my war
file and ejb jar files in the ear file. My client servlet contains the
following:
AccessControlLocalHome accessControlLocalHome =
(AccessControlLocalHome)ctx.lookup("AccessControlLocalHome");
But it failed miserably with the exception
javax.naming.LinkException: . Root exception is
javax.naming.NameNotFoundExcept
ion: Unable to resolve
'app/ejb/AccessControlBean.jar#AccessControlBean/local-ho
me' Resolved: 'app/ejb'
Unresolved:'AccessControlBean.jar#AccessControlBean' ; r
emaining name 'AccessControlBean.jar#AccessControlBean/local-home'
Just got an idea that it might be my web.xml file. So I include the
following in my web.xml file:
<ejb-local-ref>
<ejb-ref-name>ejb/AccessControlLocalHome</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<local-home>com.spear.ejb.simorder.VendorOrderSLBean.AccessControlLocalHome</local-home>
<local>com.spear.ejb.simorder.VendorOrderSLBean.AccessControlLocal</local>
<ejb-link>AccessControlBean.jar#AccessControlBean</ejb-link>
</ejb-local-ref>
But it gives the following error:
Module Name: projects, Error: weblogic.j2ee.DeploymentException: Could
not setup
environment - with nested exception:
[javax.naming.NameNotFoundException: Unable to resolve ejb-link.
AccessControlBe
an.jar#AccessControlBean is not in the context. The context includes
the followi
ng link bindings: {} Make sure the link reference is relative to the
URI of the
referencing module.]
Pls help!
Thanks!
Innovest

Help, Authentication failed

I am having a very difficult time making a simple login program work
I am using Java SDK 1.4.2_02 on a Windows 2000 host, the DS is on the same host
My Directory Server is Sun One Directory Server 5.2
I am using the JAAS package, with a JndiLoginModule
When I use a bogus uid I get a �user not found� message so I know I am contacting the DS correctly
The Access log looks like this
[09/Dec/2003:13:09:52 -0600] conn=1606 op=0 msgId=1 - BIND dn="" method=128 version=3
[09/Dec/2003:13:09:52 -0600] conn=1606 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[09/Dec/2003:13:09:52 -0600] conn=1606 op=1 msgId=2 - SRCH base="ou=people,dc=auto-trol,dc=com" scope=0 filter="(objectClass=*)" attrs=ALL
[09/Dec/2003:13:09:52 -0600] conn=1606 op=1 msgId=2 - RESULT err=0 tag=101 nentries=1 etime=0
[09/Dec/2003:13:09:52 -0600] conn=1606 op=2 msgId=3 - SRCH base="ou=people,dc=auto-trol,dc=com" scope=1 filter="(uid=jpsb)" attrs=ALL
[09/Dec/2003:13:09:52 -0600] conn=1606 op=2 msgId=3 - RESULT err=0 tag=101 nentries=1 etime=0
[09/Dec/2003:13:09:52 -0600] conn=1606 op=3 msgId=4 - ABANDON targetop=NOTFOUND msgid=3
My config file looks like this
Sample
com.sun.security.auth.module.JndiLoginModule required debug=true
 user.provider.url="ldap://localhost:4661/ou=People,dc=auto-trol,dc=com"
 group.provider.url="ldap//localhost:4661/ou=Group,dc=auto-trol,dc=com";
The error I get is this:
[JndiLoginModule] user provider: ldap://localhost:4661/ou=People,dc=auto-trol,dc=com
[JndiLoginModule] group provider: ldap//localhost:4661/ou=Group,dc=auto-trol,dc=com
ldap username: jpsb
ldap password: jim
[JndiLoginModule] attemptAuthentication() failed
[JndiLoginModule] regular authentication failed
[JndiLoginModule]: aborted authentication failed
Authentication failed:
Login incorrect
A stack trace looks like this
javax.security.auth.login.FailedLoginException: Login incorrect
at com.sun.security.auth.module.JndiLoginModule.attemptAuthentication(JndiLoginModule.java:552)
at com.sun.security.auth.module.JndiLoginModule.login(JndiLoginModule.java:310)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:675)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:129)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:610)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokeModule(LoginContext.java:607)
at javax.security.auth.login.LoginContext.login(LoginContext.java:534)
at LoginJaas.main(LoginJaas.java:93)
It appears to me that there must be some kind password problem, I can login from the 5.2 console or switch user ids from the console so I know the user and Directory Server are OK.
Can anyone help? I�ve been pounding on this for a few days and it is getting frustrating.
Thanks in advance
Jim

Here it is along with some bat files to make and run. I can't understand why it does not work. It is mostly a slightly modified example from Sun. I'm using Sun code, a Sun Directory Server and a Sun's JndiLoginModule so why the damn thing does not work is a mystery. I have looked EVERYWHERE for a sample JAAS/LDAP Authenicate code and can't find a thing. Makes me think there isn't any and JAAS is not the way to go. I and going to try with a different DS maybe open LDP or active Directory and if that doesn't work I'll forget JAAS and use JNDI instead.
Any help would be greatly appreciated.
thanks in advance
jim
Start LoginJass.java
* @(#)LoginJaas.java
* Copyright 2001-2002 Sun Microsystems, Inc. All Rights Reserved.
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
* -Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* -Redistribution in binary form must reproduct the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* Neither the name of Sun Microsystems, Inc. or the names of
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
* This software is provided "AS IS," without a warranty of any
* kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY
* EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE LIABLE FOR ANY
* DAMAGES OR LIABILITIES SUFFERED BY LICENSEE AS A RESULT OF OR
* RELATING TO USE, MODIFICATION OR DISTRIBUTION OF THE SOFTWARE OR
* ITS DERIVATIVES. IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE
* FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT,
* SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
* CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF
* THE USE OF OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS BEEN
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* You acknowledge that Software is not designed, licensed or
* intended for use in the design, construction, operation or
* maintenance of any nuclear facility.
import javax.security.auth.Subject;
import javax.security.auth.callback.*;
import javax.security.auth.login.*;
import com.sun.security.auth.callback.TextCallbackHandler;
import java.security.PrivilegedAction;
* This LoginJaas application attempts to authenticate a user
* and reports whether or not the authentication was successful.
* If successful, it then sets up subsequent execution of
* code in the run method of the SampleAction class such that
* access control checks for security-sensitive operations will be
* based on the user running the code.
public class LoginJaas
 private static Subject mySubject;
 public static void main(String[] args)
 // Obtain a LoginContext, needed for authentication. Tell it
 // to use the LoginModule implementation specified by the
 // entry named "JaasSample" in the JAAS login configuration
 // file and to also use the specified CallbackHandler.
 LoginContext lc = null;
 try
 lc = new LoginContext("Sample", new TextCallbackHandler());
 catch (LoginException le)
 System.err.println("le:Cannot create LoginContext. "
 + le.getMessage());
 le.printStackTrace();
 System.exit(-1);
 catch (SecurityException se)
 System.err.println("se:Cannot create LoginContext. "
 + se.getMessage());
 se.printStackTrace();
 System.exit(-1);
 try
 // attempt authentication
 lc.login();
 catch (LoginException le)
 System.err.println("Authentication failed:");
 System.err.println(" " + le.getMessage());
 le.printStackTrace();
 System.exit(-1);
 System.out.println("Authentication succeeded!");
 // now try to execute the SampleAction as the authenticated Subject
 Subject mySubject = lc.getSubject();
 PrivilegedAction action = new SampleAction();
 Subject.doAsPrivileged(mySubject, action, null);
End LoginJass.java
Start MyCallbackHandler.java
import java.io.*;
import javax.security.auth.*;
import javax.security.auth.callback.*;
public class MyCallbackHandler implements CallbackHandler
 public void handle(Callback callbacks[]) throws IOException, UnsupportedCallbackException
 for(int i=0;i<callbacks.length;i++)
 if(callbacks[i] instanceof NameCallback)
 NameCallback nc = (NameCallback) callbacks[0];
 System.err.print(nc.getPrompt());
 System.err.flush();
 String name = (new BufferedReader(new InputStreamReader(System.in))).readLine();
 nc.setName(name);
 else
 throw(new UnsupportedCallbackException(callbacks,
 "Callback handler not support"));
End MyCallbackHandler.java
Start Sample.java
* @(#)Sample.java 1.19 00/01/11
* Copyright 2000-01 Sun Microsystems, Inc. All rights reserved.
* Copyright 2000-01 Sun Microsystems, Inc. Tous droits reserves.
import java.io.*;
import java.util.*;
import java.security.Principal;
import javax.security.auth.*;
import javax.security.auth.callback.*;
import javax.security.auth.login.*;
import javax.security.auth.spi.*;
import com.sun.security.auth.*;
* This Sample application attempts to authenticate a user
* and executes a SampleAction as that user.
* If the user successfully authenticates itself,
* the username and number of Credentials is displayed.
* @version 1.19, 01/11/00
public class Sample {
* Attempt to authenticate the user.
* 
* @param args input arguments for this application. These are ignored.
public static void main(String[] args) {
 // use the configured LoginModules for the "Sample" entry
 LoginContext lc = null;
 try {
 lc = new LoginContext("Sample", new MyCallbackHandler());
 } catch (LoginException le) {
 le.printStackTrace();
 System.exit(-1);
 // the user has 3 attempts to authenticate successfully
 int i;
 for (i = 0; i < 3; i++) {
 try {
 // attempt authentication
 lc.login();
 // if we return with no exception, authentication succeeded
 break;
 } catch (AccountExpiredException aee) {
 System.out.println("Your account has expired. " +
 "Please notify your administrator.");
 System.exit(-1);
 } catch (CredentialExpiredException cee) {
 System.out.println("Your credentials have expired.");
 System.exit(-1);
 } catch (FailedLoginException fle) {
 System.out.println("Authentication Failed");
 try {
 Thread.currentThread().sleep(3000);
 } catch (Exception e) {
 // ignore
 } catch (Exception e) {
 System.out.println("Unexpected Exception - unable to continue");
 e.printStackTrace();
 System.exit(-1);
 // did they fail three times?
 if (i == 3) {
 System.out.println("Sorry");
 System.exit(-1);
 // let's see what Principals we have
 Iterator principalIterator = lc.getSubject().getPrincipals().iterator();
 System.out.println("Authenticated user has the following Principals:");
 while (principalIterator.hasNext()) {
 Principal p = (Principal)principalIterator.next();
 System.out.println("\t" + p.toString());
 System.out.println("User has " +
 lc.getSubject().getPublicCredentials().size() +
 " Public Credential(s)");
 // now try to execute the SampleAction as the authenticated Subject
 Subject.doAs(lc.getSubject(), new SampleAction());
 System.exit(0);
End Sample.java
Start SampleAction.java
* @(#)SampleAction.java 1.4 00/01/11
* Copyright 2000-01 Sun Microsystems, Inc. All rights reserved.
* Copyright 2000-01 Sun Microsystems, Inc. Tous droits reserves.
import java.io.File;
import java.security.PrivilegedAction;
* This is a Sample PrivilegedAction implementation, designed to be
* used with the Sample application.
* @version 1.4, 01/11/00
public class SampleAction implements PrivilegedAction {
* This Sample PrivilegedAction performs the following operations:
* <ul>
* <li> Access the System property, java.home
* <li> Access the System property, user.home
* <li> Access the file, foo.txt
* </ul>
* @return <code>null</code> in all cases.
* @exception SecurityException if the caller does not have permission
* to perform the operations listed above.
public Object run() {
 System.out.println("\nYour java.home property: "
 +System.getProperty("java.home"));
 System.out.println("\nYour user.home property: "
 +System.getProperty("user.home"));
 File f = new File("foo.txt");
 System.out.print("\nfoo.txt does ");
 if (!f.exists())
 System.out.print("not ");
 System.out.println("exist in the current working directory.");
 return null;
End SampleAction.java
Start princible/SamplePrincipal.java
package principal;
* @(#)SamplePrincipal.java 1.4 00/01/11
* Copyright 2000-01 Sun Microsystems, Inc. All rights reserved.
* Copyright 2000-01 Sun Microsystems, Inc. Tous droits reserves.
import java.security.Principal;
* This class implements the <code>Principal</code> interface
* and represents a Sample user.
* Principals such as this <code>SamplePrincipal</code>
* may be associated with a particular <code>Subject</code>
* to augment that <code>Subject</code> with an additional
* identity. Refer to the <code>Subject</code> class for more information
* on how to achieve this. Authorization decisions can then be based upon
* the Principals associated with a <code>Subject</code>.
* @version 1.4, 01/11/00
* @see java.security.Principal
* @see javax.security.auth.Subject
public class SamplePrincipal implements Principal, java.io.Serializable {
* @serial
private String name;
* Create a SamplePrincipal with a Sample username.
* 
* @param name the Sample username for this user.
* @exception NullPointerException if the <code>name</code>
* is <code>null</code>.
public SamplePrincipal(String name) {
 if (name == null)
 throw new NullPointerException("illegal null input");
 this.name = name;
* Return the Sample username for this <code>SamplePrincipal</code>.
* 
* @return the Sample username for this <code>SamplePrincipal</code>
public String getName() {
 return name;
* Return a string representation of this <code>SamplePrincipal</code>.
* 
* @return a string representation of this <code>SamplePrincipal</code>.
public String toString() {
 return("SamplePrincipal: " + name);
* Compares the specified Object with this <code>SamplePrincipal</code>
* for equality. Returns true if the given object is also a
* <code>SamplePrincipal</code> and the two SamplePrincipals
* have the same username.
* 
* @param o Object to be compared for equality with this
* <code>SamplePrincipal</code>.
* @return true if the specified Object is equal equal to this
* <code>SamplePrincipal</code>.
public boolean equals(Object o) {
 if (o == null)
 return false;
if (this == o)
return true;
if (!(o instanceof SamplePrincipal))
return false;
SamplePrincipal that = (SamplePrincipal)o;
 if (this.getName().equals(that.getName()))
 return true;
 return false;
* Return a hash code for this <code>SamplePrincipal</code>.
* 
* @return a hash code for this <code>SamplePrincipal</code>.
public int hashCode() {
 return name.hashCode();
End princible/SamplePrincipal.java
Start ample_jaas.config
/** Login Configuration for the JAAS Sample Application **/
Sample
 //SampleLoginModule required debug=true;
 com.sun.security.auth.module.JndiLoginModule required debug=true
 user.provider.url="ldap://localhost:4661/ou=People,dc=testing,dc=com"
 group.provider.url="ldap//localhost:4661/ou=Group,dc=testing,dc=com";
End Sample_jaas.config
Start sample.policy
/** Java 2 Access Control Policy for the JAAS Sample Application **/
/** Code-Based Access Control Policy for LoginJaas **/
grant codebase "file:./sample.jar
permission javax.security.auth.AuthPermission
"createLoginContext.JaasSample";
permission javax.security.auth.AuthPermission "doAsPrivileged";
permission java.security.AllPermission; //darf alles
/** User-Based Access Control Policy for the LoginAction class
** instantiated by LoginJaas
grant codebase "file:./SampleAction.jar", Principal principal.SamplePrincipal "jimshi"
permission java.util.PropertyPermission "java.home", "read";
permission java.util.PropertyPermission "user.home", "read";
permission java.io.FilePermission "foo.txt", "read";
End sample.policy
Start makelogin.bat
REM
javac LoginJaas.java principal/SamplePrincipal.java
jar -cvf LoginJaas.jar LoginJaas.class principal/SamplePrincipal.java
REM
javac SampleAction.java
jar -cvf SampleAction.jar SampleAction.class
REM
REM javac SampleLoginModule.java
REM jar -cvf sample_module.jar SampleLoginModule.class
REM
javac Sample.java
REM jar -cvf sample.jar MyCallbackHandler.class Sample.class
javac com/sun/security/auth/module/*.java
End makelogin.bat
Start run.bat
REM java -classpath ./;SampleAction.jar;LoginJaas.jar -Djava.security.manager -Djava.security.policy=sample.policy -Djava.security.auth.login.config=sample_jaas.conf LoginJaas
java -classpath ./;SampleAction.jar;LoginJaas.jar -Djava.security.auth.login.config==D:\STUFF\LDAP\loginJim\sample_jaas.config LoginJaas
End run.bat

Please help: "download failed" - trouble downloadi...

hello there,
i've just finally managed to install ovi player (though on my father's laptop; did not work for my pc nor my dad's), registered under comes with music and was all good to go -- or so i thought.
i'm having trouble downloading anything. each track gets a "download failed" status after "downloading".
i'm wondering if there were any steps i failed to take; my usb is connected under media transfer.
it's pretty upsetting to be continuously let down by nokia, however i am optimistic for a solution.
prompt responses/any help would be greatly appreciated.
thank you in advance

update:
i've managed to download an entire album, so praise goodness. however, i still get "download failed" a bunch of times. its occurrence seems random as of now, and i would still really appreciate an explanation or solution to this. thanks.
in the meantime, have a wonderful easter everyone

HELP Assertion failed!

Just this evening LR2 crashed on me while processing a wedding shoot. I can now not get back into LR2, all I get is a dialogue proclaiming "Assertion failed".
I have uninstalled and re-installed but to no avail. I am still getting this same message and I have lost my catalogue and prefs etc into the bargain.
Can anyone please help?
regards Ian

Try uninstalling the program, run a registry cleaner, and reinstall.
Jim

PLEASE HELP RE FAILED DOWNLOAD

I've trie to download application frmo ovi, however download failed at first attempt, and then failed again at second attempt, however I've now received 5 texts thanking me for my purchase, so no doubt have been charged 5 times (at £8 per app as well).
Having scrolled through the ovi support webpage for a resolution or assistance, I must say, its the worst support I've ever come across. I've been trying for half an hour to get an email contact so I can raise this problem, but ths ovi support page won't let me sign in (404 page not found error).
Can anyone provide me with a contact email for ovi store where I can raise this issue to someone.
Thanks

Hello amw79,
By using the "contact us" link in the menu bar you can access the contact information. Contact information for the UK is listed below:
http://europe.nokia.com/support/contact-us
Phone number: 0845 045 55 55
Mon-Fri 9am- 9pm
or email: http://www.nokia.co.uk/support/contact-us/ask-nokia
I hope this helps,
Unsu

Help, HDR fail

Similar Messages

Maybe you are looking for