Help Help..Can not back up my Macbook Pro with Time Machine

I have Mac Book Pro Mac OS X version 10.6.8 and Time capsule 802.11n (3rd generation), I used to do back up wirelessly but then it stopped. so i connected it directly to laptop, it did not work. so i did reset on Time Capsule/Machine and didnt work. Show error 1) Time Machine could not comple Back Up (The back disk image "/volume/data/macintosh.sparsebundle"could not be created (error 1) and then different time i tried got different error 2) Time Machine Could Not Complete (the back disk image "/volume/data/macintosh.sparsebundle"couldnot be created (error 60)..please advise

The TC drive is network and will never show up in disk utility.
You can mount the sparse bundle into the utility and do a check on it.. but that serves little purpose.
I used to do back up wirelessly but then it stopped. so i connected it directly to laptop,
It is highly likely the setup is wrong.
Please do a full factory reset of the TC.
The Factory Reset TC Gen1-4. Or AE Gen1-5
Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec.
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Redo the setup using the airport utility. For older OS and TC you can do this by ethernet with wireless turned off if you like.
Tell us the main modem router and how the TC was originally setup.. if it was in bridge mode.. then put the TC back in bridge and plug it into the router.
If there are issues they will show up in the airport utility. Please list any issues it has.

Similar Messages

  • Can i access my old macbook pro's 'Time machine' saved on time capsule with a new laptop

    How can i access my old macbook pro's 'Time machine' saved on time capsule with a new laptop.
    Also why can i only EITHER have the capsule attched to the internet OR have it as my backup external hard drive?? Things are not running smoothly can someone please help?
    Many thanks,
    Cirsflan

    Answered in your other thread.. keep to one. Just confusing running two threads with the same question.
    https://discussions.apple.com/thread/4863146?tstart=0

  • I backed up my macbook pro using time machine and now my iphoto and itunes are empty. how do I reset the computer to an earlier date?

    I backed up my macbook pro using time machine and now my iphoto and itunes are empty. how do I reset the computer to an earlier date? and why would this have happened?

    Without more information, I can't tell you why it happened. As to how to restore to an earlier date, please check out the article below. Should help you to restore form a time machine backup.
    http://support.apple.com/kb/HT1427

  • How can I back up a Macbook Pro with Bootcamp

    Ok, so I have a 13" Macbook Pro (non-Retina) that's about 5 months old. There's loose wiring in the display, causing strange symptoms with my screen. There also seems to be something stuck in the fan, as it rattles around really loudly from inside the computer and I'm afraid it will jam and overheat. Both of these should be covered under my 1 year warranty.
    If I send it into Apple or an AASP, I'm going to assume my data will be lost. I don't know how I can back up my computer so that when I get it back I can just copy across and have everything how I left it. I have Windows 7 installed with Photoshop and some games/save games that I really would not like to be lost. I have an external hard drive that should be big enough to back up both partitions. If I make it a time machine, I will lose the normal external hard drive functionality and doubt it will back up Windows too. Is there a way for me to back up both MacOSX and Windows 7 so that when I get my computer back, everything is how I left it? Thanks.

    Disk Utility format Pattition 1 Option GUID OS X extended journaled a blank powered external drive, use Carbon Copy Cloner for OS X partition (also copies the hidden Recovery also just in case)
    You can hold the option/alt key on a wired keyboard and boot from it to confirm it's working to later reverse clone (to the same Mac model on a new drive) or use Migration Assistant to a new Mac to transfer files and apps.
    Most commonly used backup methods
    For BootCamp clone and restore, use WinClone 3 on another external drive.
    What the format for the external drive is and how to restore BootCamp from that drive I do not know, they can tell you how to go about it.
    TimeMachine is well, TimeMachine, should also do that as well for OS X to have two backups at all times.

  • HT3275 How do I back up my MacBook Pro to Time machine (capsule)?

    I have time capsule installed as the wireless server and it is backing up the iMac desktop.  I was told I could back up all the computers,  When I select disk on the macbook, it doesn't list the time machine drive.  Do I need to connect the laptop directly in order to back it up?

    If the MBP is already connecting to the network via the TC it is just being difficult. (It is incredibly difficult at the moment as apple have some built in bugs in Lion and ML).
    Use finder and go, go to server. Type in the actual TC name. Thusly..
    AFP://TCname
    If the MBP still cannot find the TC.. reboot it.. it should then work.. it is like olden day electronics .. sometimes you need to give it a swift kick to get it going.
    (Please do not actually physically kick anything.. I was being metaphorical!!)

  • Import photos from old powerbook to new macbook pro with time machine

    Today I received a new macbook pro from Apple because my powerbook g4 was beyond repair. I would like to import my iPhoto library from my time machine backup to the new computer. I have opened up iPhoto and then time machine but it is only showing me today, not what's been backed up on the harddrive. Can anyone tell me what to do to focus it to what was backed up, not just today?
    Thank you so much for your help.

    In System Preferences, Sharing, is the Computer Name of the new MacBook the same as the old PB? If not, right-click the Time Machine icon in the dock and choose +Browse Other Time Machine disks+. It should be obvious where to go from there.
    // Gerry

  • Restoring macbook pro with time machine

    I have a macbook pro and I since putting Leopard on it (Archive and install) I am having all kinds of applications crashing and freezing. I am making my first time machine back up right now. What I want to know is if after the back up is done I want to do a clean install of Leopard and the restore my data and applications.
    Will I be able to restore all my applications as well as my data from time machine? Or will I have to go to all my applications websites and re-download the programs?
    Thank you
    Joe

    Joe,
    With a complete Time Machine backup, you can completely restore everything. When you boot to the Leopard Install disk, and after you have used Disk Utility (from the installer's "Utilities" menu) to format (erase) your hard drive, you can use the "Restore From a Time Machine Backup" utility. Open this from the "Utilities" menu, just as you do Disk Utility. Obviously, you'll need the backup drive connected and powered on at the time.
    This said, I'm not sure that you want to use this. If you have a damaged system, that damage will undoubtedly be reproduced in your Time Machine backup. There is even the possibility that the backup is not "viable" enough to be restored in this manner.
    I recommend you give it a try, anyway. Restoring from a Time Machine backup takes considerably less time than a "normal" installation; you will only waste minimal time, if the restoration or the resultant installation fails.
    If you do run into problems, you can reinstall normally (from the Leopard disk) and restore your files from the Time Machine afterward. In this case, I recommend that your applications be reinstalled again manually.
    Scott

  • Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

    Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

    My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
    See Here: http://pondini.org/TM/1.html
    And here: http://pondini.org/TM/9.html
    Peruse the whole site. There is a lot of information there.

  • I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down eliminate

    I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate

    I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
    You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots.  Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
    See Pondini's page for more explanation:   What are Local Snapshots?   http://pondini.org/TM/FAQ.html
    I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
    You have tested the library on the external drive, and so your photos are save there.  
    The local TimeMachine snapshot probably now contains a backup of the moved library.  Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

  • TS3992 can i back up my MacBook Pro to iCloud?

    Can I back up my MacBook Pro to iCloud?

    No. That's not a feature of iCloud at this time.

  • Can i erase my stolen macbook pro with find my mac even if it states the device was locked on a specific date (not by me) after being stolen?

    Can i erase my stolen macbook pro with find my mac even if it states the device was locked on a specific date (not by me) after being stolen?

    Barry, the other stolen computer, my IMac does not show me a locked on such and such date, but simply says offline.  I set that computer to erase when it goes online and notify me when it is found, and to play a tone and play a message that the police are on their way!

  • TS1550 My time capsule will not back up. There is a time machine error message that states "The backup disk image "/volumes/Backup/Jane's MacBook Pro.sparsebundle" is already in use. How do I correct this problem?

    My time machine will not back up. I get a Time Machine Error message that reads: "The backup disk image "/Volumes/Backup/(myname)'sMacBook Pro.sparsebundle" is already in use.
    I have not been able to back up for two weeks, I think this occurred after an update to the operating system, but I am unsure.
    How do I correct this problem?

    Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

  • HT201250 It say can not open because it is in a time machine backup?

    How to open time machine it tells me I can not open because it is in a time machine back up ?

    You can't open files in a TM backup. What are you trying to do, restore a file?

  • Where can I buy a 15" Macbook pro with Snow Leopard installed

    I would appreciate knowing where can I buy a 15" Macbook pro with Snow Leopard installed

    http://store.apple.com/us/browse/home/specialdeals/mac/macbook_pro/15

  • Can I set up my macbook pro with an ethernet connection?

    can I set up my macbook pro with an ethernet connection?

    MacBooks Pro with Retina display don't come with Ethernet port. You need a Thunderbolt to Ethernet adapter > http://store.apple.com/us/product/MD463ZM/A/thunderbolt-to-gigabit-ethernet-adap tor

Maybe you are looking for

  • Doubt on simple select query

    Hello experts, please check this code. CHECK NOT T_DELIVERIES[] IS INITIAL.   SELECT MANDT VBELV POSNV VBELN POSNN INTO TABLE T_VBFA FROM VBFA     FOR ALL ENTRIES IN T_DELIVERIES     WHERE VBELN EQ T_DELIVERIES-VBELN       AND POSNN EQ T_DELIVERIES-P

  • Calling a function from SQL that has Out Parameters

    Hello folks, I am not sure if this is do-able, but here is my scenrio at hand. I have a database function that accepts a few IN parameters and OUT parameters. I want one of the Out parameters to display as part of my select statement. Is this possibl

  • Can I use a tableData provider without to use a table of data base

    i need add rows in a table using the IDE sun java studio creator but I dont need to connect to a table to a database... only add rows in runtime when I do click in a button.. please help me...

  • Listener dies mysteriously

    Since yesterday the listener of a 10g Oracle db died mysteriously after few hours of service. Once I restart the computer, everythink works fine again. But few hours later, it died again. The listener log is as below: 13-MAR-2007 23:32:14 * service_u

  • WRT610N V2 blocks traffic on specific port after large transfer

    Goodday, It came to my attention that when i transfer a large amount of files to the USB storage device, which can be attached to the router, it closes the port and can't be reopened anymore. To solve this problem a power cycle/reboot is needed.  I a