:help help hellp urgent discoverer plus settings

I have database at m1 and application layer at m2 and admin,discoverer plus at m3.
I have created EUL,Business area with one table in adminstrator at m3. and when i am trying to create new workbook i could not see the business area at the discoverer plus
can u tell me what permissions/settings to be made to access that workbook.
since i am working under big module..this is prototype i should finish it immediately..plz anybody help
regards
chandra

Hi Aparna,
1. Do firewall settings or changes in server settings affect Discoverer Plus?
A. Yes
2. How does Discoverer Plus actually work? I mean what server settings one has to do for this application?
A. Discoverer is a web based reporting tool which is developed through Java programming. When ever u develop a report in discoverer by clicking folders, joins etc it will automatically writes a query and the same is store it in the discoverer objects.
When ever u execute a report in discoverer, the discoverer will just send only the query to the database, and from the database it fetch the data according to ur requirements.
Regarding server settings its all depends on the environment u are using.
If u are using oracle application 11.5.7 then u really don't need to struggle a lot for server settings because discoverer is a component of Oracle 9i Application server.
3.Can I get some online literature on Discoverer Plus?
A. Its is available in www.oracle.com
Regards
Swamy!

Similar Messages

Integrating Oracle Help with Discoverer Plus

Folks -
Has anyone tried integrating Oracle Help with Discoverer Plus. I want to add my customized help (generated in RoboHelp - Oracle) to the help in Discoverer Plus. Is this doable? I don't want to use Oracle Help exclusively unless I need to.

Hi, Johnny.
I think you might have better luck getting your question answered on the forum for Discoverer at Discoverer
I'm not sure whether Discoverer supports extensions, but I would assume that they do in some way. Discoverer ought to provide a standard mechanism for extensions to provide help content.
Hope this helps,
Ryan Pollock
Oracle Help Team

Discoverer plus patch installation help

i have installed the base version of discoverer 10.1.2.0.2 and version of plus installed is 10.1.2.48.18.
For discoverer plus to work in ie7 i came to know that i have to apply this PatchSet3 from the link
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622 and CP6.
I have installed with the name BIHome_1 in E Drive.The path of installation is E:\Oracle\BIHome_1.Now when i am trying to install patchset3 "5983622" ,it is asking me for the name and path and by defult it is taking name as oracleas1 and path as E:\OraHome_1.
What shuld be the actual path of this patch?should i point the path to E:\Oracle\BIHome_1?
If i give the default path and try to install ,it is giving me error as "there is no patch that needs to be applied".
can you tell me correct path for this patch to be installed?
Am i using the correct patchset3(5983622) ?

Hi ,
From the path pf installation it seems that it is a Discoverer Admin/Desktop installation .
Is the above is correct ?
Patch 5983622 is Discoverer 10.1.2.3 patch which can be applied on Discoverer Admin/Desktop and also on Discoverer Plus/Viewer .
In order to apply Patch 5983622 on Discoverer Admin/Desktop do the following
1. Click on to the setup.exe
2. In the OUI make sure Source is pointing to <Your Patch downloaded location>Disk1\stage\products.xml
3. For Destination choose the Oracle_Home pointing to your Discoverer Admin/Desktop installation directory .
Thanks,
Sutirtha

Totals not showing in Discoverer Plus - Urgent please

Hi there,Thanks to all for helping on questions and sharing thoughts.
I got a question from user in Discoverer plus, this is an urgent need.
Actually they built report in Plus in Production based on 2 folders with few conditions and all, everything working fine and getting data.
on one column in the report they need Total mean they used Sum but it is showing only lable not the value, like Sum:
Even we tried Cell Sum, no luck, also I tested format of data and changed to NUMBER datatype, SHOW NULLS AS to 0,
And also created calculation to avoid nulls like case statement if it is null then '0' otherwise that value and did Toal on Calculation column, still not working.
I've seen in Disco Admin Dev/QA, that there is joins between these folders and i regarding getting data is not an issue from user I guess.
Can anyone guide me or point me on this that would be greatly appreciated.
Thanks in advance,
skat

Thanks for your response on this,
I didnt get you, can you explain in brief.
See to avoid null values I created calculation and used case statement.
When I create total using SUM or Cellsum funstions it is not giving data it is giving only the label.
one more thing this is, actually I saved that report on myid and was trying to play and when I try to keep only that column it gave me the result if i add other columns from other folder again getting the same issue.
Any ideas or thoughts on this please.
--skat

Discoverer Plus Drill into Item - URGENT

Is the drill into item option available om Discoverer Plus? Because in Desktop Edition works fine, but in this web version, it's not present in the sheet menu nor double-clicking on any items.
Please, it's very urgent!
Thanks.
Mariano

Hello Rod
UPDATE:
- when the privileges are changed directly to the user, setting the scheduling to "User is never required to schedule workbooks" helped.
But it means I will have to monitor if a user has been added and setting him this directly. Do you see any option to avoid this (as I said in my post above, users and their private connections and role grants are done automatically).
Thank you for help!
Petr

RunningTotal in Discoverer Plus - Urgent Need

Hi there,
First of all wold like to say thanks for all.
I would need help on RunningTotal in Discovere Plus, for example
A
1
2
3
4
Calculated_Running_Total_Amt
1
3 (1+2)
6 (3+3)
10 (6+4)
I was wondering, I tried using RunningTotal function in Disco Plus while we calculate, but am not sure how it works, like it is asking order by row and someother stuff,.
can anyone guide me onthis exactly how it works or is there any other way to accomoplish it that would be great.
Thanks in advance,
skat

Hi,
You need to use analytic functions to calculate running totals. So, for example, the calculation SUM(A) OVER (PARTITION BY B ORDER BY C) will first group the rows in partitions using column B then sort the rows using column C, then calculate a running total by taking the sum column A from the start of the partition to the current row. The rows may then appear in any order in the report, unless you use a sort in the workbook definition.
Rod West

HELP: Synchronization between Disc Plus/Viewer/Admin/Client

Can anyone explain this to me: changes in end user layers in admin edition and reports in desktop edition aren't showing up in disc plus and viewer (using the same schema). I've even deleted business areas that are still showing up in disc plus!!

This could be a problem with diferent versions of discoverer. You can check the version of discoverer and the version of the EUL that it's using innthe help menu. For Example Discoverer 3.1 EUL it's Diferent from Disco 4 EUL and so on.
Hope this Helps. I think you're right. On the server I'm running 4.1.3.7, but on my desktop I installed the latest and greatest that came with the 9i Dev Suite release 2 and had to upgrade the EUL when I ran the admin edition. Do you know if Discoverer Plus/Viewer are compatible with 9i Dev Suite discoverer edition? If so, is there any configuration that needs to be done to have it synch with this latest discoverer release?
Thanks.

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". I've quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. HELP

Apps tab of Creative Cloud desktop helper constantly displays "Download error. press retry or contact customer support". As well as reloading, I've also quit CC desktop helper, restarted computer, checked network settings, relogged in. Cannot download any new apps or updates. please help.
System: Mac OSX 10.9.4. 3.4ghz intel core i7, 8gb ram

Hello,
Adobe has brought these new links in this matter:
Troubleshoot Creative Cloud download and install issues and
App doesn’t open; progress wheel spins continually
Please have a look there. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
Good luck!
Hans-Günter

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465

I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!

You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there.

Need some quick help - fairly urgent!

I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?

I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
    Re: Need some quick help - fairly urgent!
    created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Unable to get Rmi program working. Help plz - urgent.

Any help to get this problem resolved would be of help.
I get the error as below:
D:\test\nt>java Client
Server
Client exception: Error marshaling transport header; nested exception is:
javax.net.ssl.SSLException: untrusted server cert chain
java.rmi.MarshalException: Error marshaling transport header; nested exception is:
javax.net.ssl.SSLException: untrusted server cert chain
javax.net.ssl.SSLException: untrusted server cert chain
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a([DashoPro-V1.2-120198])
at com.sun.net.ssl.internal.ssl.ClientHandshaker.a([DashoPro-V1.2-120198])
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage([DashoPro-V1.2-120198])
at com.sun.net.ssl.internal.ssl.Handshaker.process_record([DashoPro-V1.2-120198])
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a([DashoPro-V1.2-120198])
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a([DashoPro-V1.2-120198])
at com.sun.net.ssl.internal.ssl.AppOutputStream.write([DashoPro-V1.2-120198])
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:76)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:134)
at java.io.DataOutputStream.flush(DataOutputStream.java:108)
at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:207)
at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:178)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:87)
at Server_Stub.passArgs(Unknown Source)
at Client.main(Client.java, Compiled Code)
the server was invokde as:
D:\test\nt>java -Djava.rmi.server.codebase="file:/d:/test" -Djava.policy=d:/test/policy Server a b c
Server bound in registry
where policy had allpermission
The server program is given as below:
import java.net.InetAddress;
import java.rmi.Naming;
import java.rmi.registry.LocateRegistry;
import java.rmi.registry.Registry;
import java.rmi.RemoteException;
import java.rmi.RMISecurityManager;
import java.rmi.server.UnicastRemoteObject;
public class Server extends UnicastRemoteObject implements Message
     private static String[] args;
     public Server() throws RemoteException
          // super();
          super(0, new RMISSLClientSocketFactory(),
               new RMISSLServerSocketFactory());
     public String[] passArgs() {
          System.out.println(args[0]);
          System.out.println(args[1]);
          System.out.println(args[2]);
          System.out.println(args.length);
          System.out.println();
          return args;
     public static void main(String a[])
          // Create and install a security manager
          if (System.getSecurityManager() == null)
               System.setSecurityManager(new RMISecurityManager());
          args=a;
          try
               Server obj = new Server();
               // Bind this object instance to the name "Server"
               Registry r = LocateRegistry.createRegistry(4646);
               r.rebind("Server", obj);
               System.out.println("Server bound in registry");
          } catch (Exception e) {
               System.out.println("Server err: " + e.getMessage());
               e.printStackTrace();
The RMISSLServerSocketFactory class is as below:
import java.io.*;
import java.net.*;
import java.rmi.server.*;
import javax.net.ssl.*;
import java.security.KeyStore;
import javax.net.*;
import javax.net.ssl.*;
import javax.security.cert.X509Certificate;
import com.sun.net.ssl.*;
public class RMISSLServerSocketFactory implements RMIServerSocketFactory, Serializable
     public ServerSocket createServerSocket(int port)
          throws IOException
          SSLServerSocketFactory ssf = null;
          try {
               // set up key manager to do server authentication
               SSLContext ctx;
               KeyManagerFactory kmf;
               KeyStore ks;
               char[] passphrase = "passphrase".toCharArray();
               ctx = SSLContext.getInstance("TLS");
               kmf = KeyManagerFactory.getInstance("SunX509");
               ks = KeyStore.getInstance("JKS");
               ks.load(new FileInputStream("testkeys"), passphrase);
               kmf.init(ks, passphrase);
               ctx.init(kmf.getKeyManagers(), null, null);
               ssf = ctx.getServerSocketFactory();
          } catch (Exception e)
               e.printStackTrace();
               return ssf.createServerSocket(port);
The RMIClientSocketFactory is as below:
import java.io.*;
import java.net.*;
import java.rmi.server.*;
import javax.net.ssl.*;
public class RMISSLClientSocketFactory     implements RMIClientSocketFactory, Serializable
     public Socket createSocket(String host, int port)
          throws IOException
          SSLSocketFactory factory =(SSLSocketFactory)SSLSocketFactory.getDefault();
          SSLSocket socket = (SSLSocket)factory.createSocket(host, port);
               return socket;
And finally the client program is :
import java.net.InetAddress;
import java.rmi.registry.LocateRegistry;
import java.rmi.registry.Registry;
import java.rmi.RemoteException;
public class Client
     public static void main(String args[])
          try
               // "obj" is the identifier that we'll use to refer
               // to the remote object that implements the "Hello"
               // interface
               Message obj = null;
               Registry r = LocateRegistry.getRegistry(InetAddress.getLocalHost().getHostName(),4646);
               obj = (Message)r.lookup("Server");
               String[] s = r.list();
               for(int i = 0; i < s.length; i++)
                    System.out.println(s);
               String[] arg = null;
               System.out.println(obj.passArgs());
               arg = obj.passArgs();
               System.out.println(arg[0]+"\n"+arg[1]+"\n"+arg[2]+"\n");
          } catch (Exception e) {
               System.out.println("Client exception: " + e.getMessage());
               e.printStackTrace();
The Message interface has the code:
import java.rmi.Remote;
import java.rmi.RemoteException;
public interface Message extends Remote
     String[] passArgs() throws RemoteException;
Plz. help. Urgent.
Regards,
LioneL

hi Lionel,
have u got the problem solved ?
actually i need ur help regarding RMI - SSL
do u have RMI - SSL prototype or sample codings,
i want to know how to implement SSL in RMI
looking for ur reply
-shafeeq

Please i need help very urgent !!! after deleting my exchange account because the company changed the password , I lost 150 200 contacts and i need to get them back very soon ! please help

Please i need help very urgent !!! after deleting my exchange account because the company changed the password , I lost 150 200 contacts and i need to get them back very soon ! i never backed up on itunes ..please help

No. The contacts are "owned" by the Exchange server.
The Exchange server is owned by the company.
Everything on the Exchange server is owned by the company.
If you quit or were terminated, and your access to the system has been revoked, then there is nothing you and do at this point. Once you deleted the account from your phone, all of the associated data was deleted.
NEVER store personal information on company systems.

Lsmw issue plz help its urgent

Hi Experts ,
i need to create a LSMW using batch input .
but the requirement is on the basis of conditions my recording need to be changed .
dat means
3127POL09 3127POL09-1 CTR 3127-1003E 100 FUL
3127POL09 3127POL09-2 WBS 3127POL01 60 FUL
for ctr i ill have to post data in screen number 200
and for wbs i ill have to post data in screen number 400 .
can we put some conditions in recording in lsmw ?
i no we can create multiple recording but how can we use them to fullfill my requirement .
plz help its urgent
thanx in advance

Hi,
Within LSMW, there is an option to write our own code wherein this code can be incorporated.
This is in the Field Mapping Option...
Just go to the Menu Extras->Layout
and click on the check box Form Routines
Global Data.
Here you can define Global Variables and also perform your ABAP Coding.
Regards,
Balaji.

Javafx deployment in html page(please help me urgent)

i used the following method to deploy javafx in an html page.
javafx file is:
package hello;
import javafx.scene.*;
import javafx.stage.Stage;
import javafx.scene.text.Text;
import javafx.scene.text.Font;
import javafx.scene.paint.Color;
import javafx.scene.effect.DropShadow;
Stage {
    title: "My Applet"
    width: 250
    height: 80
    scene: Scene {
        content: Text {
            x: 10 y: 30
            font: Font {
                 size: 24 }
            fill: Color.BLUE
            effect: DropShadow{ offsetX: 3 offsetY: 3}
            content: "VAARTA"
I save the file as HelloApplet in a 'hello' named folder in my D:
after that i downloaded from internet html code as
<html>
    <head>
        <title>Wiki</title>
    </head>
    <body>
        <h1>Wiki</h1>
        <script src="dtfx.js"></script>
        <script>
            javafx(
                archive: "HelloApplet.jar",
                draggable: true,
                width: 150,
                height: 100,
                code: "hello.HelloApplet",
                name: "Wiki"
        </script>
    </body>
</html>now i typed in DOS prompt as javafxc.exe HelloApplet.fx & i got the class files .
_The main problem which is coming is how to create HelloApplet.jar file which is used in the html page without which the html page is not displaying the javafx script. Please help me urgently i am in the middle of my project & stuck up due to JAVAFX                   i am using WIndowsXP & javafx-sdk1.0 when i am typing jar command inside hello package it is displaying invalid command.in DOS prompt. If there is any other method to deploy javafx in html page then specify it also.

Crossposted: [http://forums.sun.com/thread.jspa?threadID=5323288].
Please don't crosspost without notifying others. It is rude in terms of netiquette. Stick to one topic.

Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.

Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.

Yes, I am connected to the Internet through my wifi. Everything is working fine with the e eption of youtube. I have reset all Internet settings and have tried synching to iTunes followed by rebooting. This is all the advice I have found although none of it has been helpful.
Has anyone else encountered this problem?

:help help hellp urgent discoverer plus settings

Similar Messages

Maybe you are looking for