HELP HELP HELP battery lighting bolt wont leave
Please refer to this post
http://forums.ipodlounge.com/showthread.php?s=&postid=715239#post715239
And this apple help page.
https://swdlp.apple.com/cgi-bin/WebObjects/SoftwareDownloadApp.woa/309/wo/dQAawa uPVKq9dzR7GdbRp0/2.1
Ps. could it be a faulty battery which worked for about a week, died (my fault) now WONT CHARGE
Anyone can help.
If you ask
yes, I restarted my computer
yes, I restarted I tunes
yes, I re installed i pod software
no my computer wont recognize i pod
no, i tunes wont reecognize i pod
no, update sofwtare wont regonxize (therefore i cant restore)
Thanks very much for any assistance
At Ease .. Young One . Patience is th only solution to your problem . What your facing is a Flash Drive Skip > Minor problem I'd Say. What your gonna do is an Ipod Reset.
Steps for an IPOD Reset:
Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
Tip: If you are having difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
If the above steps did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep.
After that get the latest IPOD updater Software (from Ipod Site )and LOad it on to your Computer.
It should work like clock work from there.
Similar Messages
-
My Iphone4 charges when The battery has fully died but when its on the lighting bolt does not appear. "Help"!
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for two years from the original purchase date of your iPod.
Suggest that you take full advantage of the above. -
Hey guys on my mac book pro after updating three apps wont leave my dock, when i close them they just re-appear they are "LoginServer", "USBServer" and "NetServer" any ideas to what is the issue?????? PLEASE HELP.
Hi I have just got back from the apple store and the guy at the Genius bar looked at it and said it was a manufacturing fault, and because it has been like it since new, and seemed to be getting worse he replaced the computer and I have a new warranty from today.
We got the feeling as soon as he looked at it that he has seen this before, I did say to him I was concerned it would be a replacement screen and I was not really happy about that as it was so new, and he said that was the normal procedure, but as the fault was already there at new and it was getting worse they would replace. I could not have asked for a better service.
Not unpacked this one yet but am hoping all is good, its a great little machine.
Thank you for your responses, and I hope this might help someone else. One thing it did not seem to be missing pixels but something to do with the screen production? -
my ipod shuffle 4th gen bought today and the voice over works for naming playlist and battery percent but wont name song and artist can anyone help also is the voice over button meant to be soft when pushed ?
thanksThis document explains setting up and using VoiceOver.
http://support.apple.com/kb/ht4322
The overall settings for VoiceOver is on the shuffle's Summary screen in iTunes.
Artist name and song name - Press and release the VoiceOver button.
The playlist menu - Press and hold the VoiceOver button. -
just updated my ipad4. now its in recovery mode it wont leave it and even tried that fancy little home and lock screen trick. It is telling me i need to restore. I do not want to because i have not backed up my pictures. HELP!!!!!!!
It's too late now to worry about not having backed up. You have to restore the iPad or .....
A. You can have a device that still has all of the photos on it but you can't get to them because the device doesn't work
or.....
B. You can restore, lose the photos and have a functioning device again. -
can't turn my MacBook on I've got a black screen, no sound, battery light on back is on and so is led magnetic light. I have taken battery out and reset and nothing. please help any suggestions would b greatly appreciated
Try resetting the SMC. This page has the instructions - you have to scroll down about a thrd of the way through the page:
http://support.apple.com/kb/HT3964 -
Sideways Lighting Bolt icon please help Urgent
Ok so when I try to print from my HP Photosmart C8180 printer the printer options appear with a sieways lighting bolt that is yellow saying that the printer is offline. Does anyone know how to fix this? I have unplugged it, plugged it back in, checked the internet, which is working and nothing is working. I switched the printer to my laptop and it worked but it still wont work from my desktop. My Mac is a OS X 10.7.5.
Anyone know what to do?System Preferences->Print & Fax->CONTROL-click in the printer window and RESET the printing system. If the printer doesn't show up, click on the plus button and select it.
-
HELP!! Itunes wont install on Windows 7. I get an error msg. there is a problem with this windows installer package. A program required to install to complete could not be run. Contact your support personnel or package vendor. WHAT NOW?
Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix. -
i have the new ipad 16gb it was working fine till i went to download the new itunes and the apple mobile device recovery mode my windows pc cant find the software to download it i need help because my ipad wont work i only see the itunes and usb symbol can anybody help me.
Try these instructions:
http://support.apple.com/kb/TS3281
You may also have to go to the link in the bottom paragraph if the first page instructions do not work. -
Hi. Does using the cover lock help battery life?
Hi. Does using the cover lock help battery life?
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
Hi there.wondering if u can help.My iphone 5 wont connect to wi fi.Any suggestions.Thanks.Robert
Hi there.wondering if u can help.My iphone 5 wont connect to wi fi.Any suggestions.Thanks.Robert
Tap Settings App > General > Reset > Reset Network Settings. Then relog into WiFi. If still problem, maybe the WiFi Network you are using is the problem. If the WiFi is OK, then Restore your iPhone with current iTunes on your computer. See if better. If still a problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.
-
help! my mac wont boot
Have you tried Safe Boot?
You also might reset PRAM and reset SMC.
Have you tried booting with the Recovery System? See its possibilities here.
From there you can make repairs to your primary startup partition.
Do you have a backup? If not, do you have an external drive large enough to back up your primary drive? It would be good to have one in case your drive needs repair or replacement. -
What is the lighting bolt under pic of battery with red line
what is the lighting bolt under the battery icon with the redline
Mine is doing the exact same thing...We are not the only users who have run into this SAME problem. I have searched everywhere for a solution. I've tried JL, BBsak, DM, and crackmem. Nothing works...can't seem to connect
Berries are good for you! -
I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle. I had it on charge all night but still dead.
Try here.
iPod touch: Hardware troubleshooting
You may have a hardware problem. -
Like what I mentioned, the iPod do not work, it won't play music and the battery light do not flash.
But it shows in iTunes, and I could sync music into it.
I tried to reset all the settings of the iPod, and installed all the new software, but it does not work.
I don't know if it works before, my friend left it to me. I erased all the data she used before and syncronized all my music inside.
But it just never worked in my hand...
I really appreciate all feedbacks! Thanks and please answer this question if you have the similar situation!!Are you using the USB docking cable that came with the iPod? There are separate contact points for power and data, so it is possible for the cable to connect for data, but not for power. Some third-party replacement cables may be of lower quality, if you do not have the original cable
However, it seems to be getting power, since the shuffle is operating when connected and you are able to sync when it is connected. So I think your USB docking cable is working.
That leaves a problem with the USB port or a problem on the shuffle.
For the USB port, it may not be supplying sufficient power to charge the battery. As a test, you should shut down (power off) the computer and disconnect all USB devices, including hub, except for standard keyboard and mouse (if normally used). If the Mac is a laptop, connect its power adapter (so that it's not running on battery power). Do this to reset the shuffle
http://support.apple.com/kb/ht1655
Start up the Mac, run iTunes, and connect the shuffle to a direct USB port on the Mac. Any difference...?
If that does not help, it may be a problem with the shuffle, such as a worn out battery.
Maybe you are looking for
-
Having multiple nodes with the same name in JTree!!!???
Hi! I want to be able to have folders or files with the same name in different locations in my JTree. But if I do so the last one always overwrites the previous one. I have a vector with strings like root\aaa\bbb\ccc\ddd.doc, root\aaa\bbb\eee.doc, ro
-
Why are my sent items not stored when sending from Apple Mail?
Hello Apple Support Communities, I am Using an iMac at my place of employment. It is running OSX Yosemite v10.10.2 . I am also using Apple Mail to connect to our Exchange 2010 Server. I do the same with my iPhone, iPad, and Windows Laptop using Outlo
-
I have no sound in preview window or timeline.... play clip on desktop plays fine. I have volume indocator on the left side meters still no sound.
-
Web-service publishing error in OSB
Hi friends! Recently I installed Oracle Service Bus, as I need to implement a simple SOA in my research work at the university. I tried to find a simple example to get familiar with OSB, and found one in Definitive Guide to SOA Oracle Service Bus, Se
-
Hello, I would like to setup templates for what to be monitored and alarmed in our company for the different SAP setups, such as for example: ABAP, Oracle, APO ABAP/Java, Oracle, BW Meaning to have specific components monitored based on the system se