HELP HELP HELP BOOT UP PROBLEMS
first off i think that my powerbook is a screwed up i sent it off to be fixed and i think apple screwed it up more. after i got it back it started to freeze up on me and sometimes the dim screen would come up saying that i needed to restart my computer. now ever time i try to turn it on all i hear are fan noises or what sounds like fan noises. PLEASE someone help me and tell me what to do
here is what i have figured out so far:
1 - using the installation disk i was able to start up my computer. insert the CD and press option while turning it on. then start the computer with the CD. then on menu utilities, restart from start disk and select your HD and it should take a while but restart.
2 - i think the problem is with a firmware update that did not install properly. read this article: http://support.apple.com/kb/HT1557
But everytime I restart i still have the problem.
Similar Messages
-
Help me, I have a problem with font when export report to PDF?
Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PMgive it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.
-
My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?
Hi Venkata from NZ,
If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Can you help me to solve this problem (user-exit for xd02)
Hi!
can you help me to solve this problem?
transaction XD02
To pass the length of the field to 7 max for KNA1-SORT (Search criterion 1 )
To pass the length of the field to 4 max for ADRC-SORT2 (Search criterion 2)
It is not possible to save the customer card as long as the search criterion is not univocal
I seek one to use-exit .
Thanks.Hi,
Check the exit SAPMF02D.
Regards,
Surinder -
Help with add file name problem with Photoshop CS4
Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb -
HELP! i got a problem with my mobo 945GCM7-L
HELP! i got a problem with my mobo 945GCM7-L
specs;
*mobo = MSI 945GCM7-L(MS-7507) driver installed
*cpu = Intel Pentium E2180, LGA 775
*BIOS = american megatrends version 3.1
*sdram = DDR 2 1Gb
*GPU = sparkle/ nvidia 8500gt ddr2 1Gb128 bit (direct X9.0c and driver installed)
*HDD = seagate sata 80Gb (3Gb speed enabled 'no jumper')
*OS = XP PRO SP2
PROBLEM:
*sometimes it just hang-up (one application only) like a simple Microsoft word 2007.
*while playing DOTA (LAN gaming) = in just a couple of minutes you will experience a lagged then suddenly you'll be disconnected from the game
Isolation:
change the SDRAM with lower and higher RAM = same problem
change the GPU with higher and lower model (driver installed) = same problem
cable connection + good connection = same problem
take note;
I GOT 4 UNITS WITH THE SAME SPECS = 4 UNITS WITH THE SAME PROBLEM
NOW WHAT???Does it hang using the onboard VGA? Try with prime 95 or orthos for stability testing, what spec are your psus?
You could try the v3.2 BIOS but I'm not sure it will help you. -
I have problem with account that i can't make update or buy from app store
There is massage appear in my payment page that i must contact with i tunes support to complete this transaction
Please help me to fixe this problem as soon possible
Hany hassan
0096597617317
0096596677186
Thank youYou need to Contact iTunes Support...
Apple Support iTunes Store Contact Us -
Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support -
Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks
As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.
-
Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.
Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore. -
Can someone help me with an iCloud problem when I take a picture with my iPhone 4s it some of the times go to my ipad2 but mostly it doesn't can anyone help me out
I'm assuming you have Photo Stream set up of both devices. However, it seems many users are experiencing the same as you - my take is that streaming photos is not foolproof yet.
-
please can you help me to solve my problem ( I have iphone is linked with Apple ID and I forgot that Apple ID and I can't remember it , I need thats Apple ID to activate my iphone ,,, what should I do ?
mohammed aljasim wrote:
there are many people that error is happened with them and one of this people is me ,, Apple must be find the solution for this problem
You are absolutely WRONG. Apple bears no responsibility in this at all. YOU purchased a STOLEN phone. You are guilty of receiving stolen property at best. Take it back to wherever you bought it and demand a refund. Failing that, turn it over to the police. You got ripped off. I'm sorry you wasted your money, but there is NOTHING Apple or anyone else can do for you. Only the rightful owner of the phone can unlock it. -
Hello Experts Please help me to solve this problem.
Hello Experts,
I am getting a problem while installing the SOLUTION MANAGER 4.0.
in step 17/45 IMPORT ABAP :
the problem is :
ERROR 2008-04-29 03:10:28.110
CJS-30023 Process call '/usr/sap/SLM/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
when i saw R3load.exe.log file it has the following contain :
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SLM/SYS/exe/run/R3load: START OF LOG: 20080428095833
/usr/sap/SLM/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
/usr/sap/SLM/SYS/exe/run/R3load: version R7.00/V1.4 [UNICODE]
Compiled Jul 14 2007 02:19:03
/usr/sap/SLM/SYS/exe/run/R3load -testconnect
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12505
DbSl Trace: CONNECT failed with sql error '12505'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/SLM/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SLM/SYS/exe/run/R3load: END OF LOG: 20080428095834
Please can any body help me to solve this problem.
waiting for fast response, as my installtion is pending due to this problem.
have a nice day.
Regards,
Shivendra.Hi,
The following should be verified:
(1) check what DB instances the listener currently is aware of. This can be done with the command 'lsnrctl services'.
(in case you listener does not have the default name LISTENER, then use 'lsnrctl services <listener name>' )
(2) Perhaps there is an issue with the dynamic instance registration, even though the error code is different, you should nevertheless check the points from note #563574.
(3) Verfiy the value of the parameter local_listener (see mentioned note). Since you have changed the listener, the parameter might still be wrong.
In case local_listener is correcly set you should give the command
ALTER SYSTEM REGISTER;
a try.
Best Regards,
Michael -
HELP!!!! problem with motherboard HP Probook 4520s , need replacement, where can i buy it??
bumer_v
You can buy by HP PartSurfer or her
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. -
My iPhone 5s was bought with full price in the USA from Sprint, and I was told that it is a global phone. And I can use it in china.
But I can not use it in the USA, so could you mind help me to solve that problem.
I think someone of you must help me to solve this problem !
Details:
SN:F2*****FDR
<Edited by Host>See the response in your other thread:
https://discussions.apple.com/message/24641427#24641427
Maybe you are looking for
-
Linking Session Model with query model
Hi All, How do we implement a basic Session Model? Can we use a Session Model similar to Query Model and bind all the columns/attributes with that of ViewBean's ? Does Studio support that. We have a requirement wherein we need to manipulate the field
-
SSIS 2008 R2 enviroment configuration
Hi everyone, I would get as for some assistance with SSIS pacgakge configuration I am maintaining a Data Warhouse and i was used to develop and test on production enviroment(!) Now, I am setting up a different enviroment for development and testing M
-
I am looking for a smoothe line drawing effect as in the pencil tool in Flash. I need to implement the same using as3. Any idea how I can achieve that?
-
Generate Alerts for Task changes in Project Schedule
Hi, I would like to generate alerts to all the Project resources when a Task has been revised in Project Schedule. Does MS Project Server 2010 provides this functionality OOTB? If this not available OOTB, I am planning to write an event handler to g
-
Reading a Bitmap as Numeric Values
I've been searching the net for a few days on and off and can't find what I need... so here I am. I need to be able to read in a Bitmap file so that the image as pixels are read into an array of numerical values. ... and that's it... any help would b