HELP-HELP-HELP Desktop Manager Crashes while loaded or connected with BB

Hi All... Please Help me out....!!!! I have recently purchased a BB 8310 Curve from Vodafone. From very 1st day, it could not be connected in my laptop with Desktop Manager supplied with the package CD. I have downloaded the latest version of BB Desktop Manager from the site, but it seems to be worst than before, it crashes before connecting the BB in USB port. Desktop Manager crashes every time, when the BB is connected : This shows an error message Box "BlackBerry Desktop manager has encountered a problem and needs to close" The error signature is shown from mshtml.dll file.

Hello and Welcome to the Forums!
sheberry wrote:
I am so frustrated. I'm just an everage old person and I cannot get straight information from your manuals, virtual help, these forums - whatever. It seems to me what I want to do is pretty simple, yet my brain is busting trying to figure it out and read all this junk!!! Sorry for the rant.
Just to set your expecations correctly...based on the above highlighted text, you need to be aware that these forums are a user-to-user support channel, not a user-to/from-RIM conduit.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Desktop Manager crashes when opening backup file with critical information

I was on a trip and a family member triggered my Bold's secure wipe (wrong password 10 times). I had made a back-up just before the trip and it contains very critical information. When I try to do a restore with Desktop Manager (4.7.0.32, same version as used to make the backup), it crashes as soon as I select the backup file. I tried opening the .ipd backup file from Advanced instead, with the handset disconnected, with the same crash result: "An unhandled win32 exception has occured in DesktopMgr.exe [4340]." where the number in the brackets is different every time.
Please help me, I will likely lose my job if I cannot restore the information from this backup!
Edit: I tried reinstalling the Desktop Manager, and same thing. I even tried 4.6 instead of 4.7 and again, same thing.
Message Edited by Prune on 12-31-2008 05:03 AM

Connected to the USB, can you do a Restore > Advanced and select the critical databases?
Are you connected to the PC via USB to a rear PC USB port--not a USB hub, or front monitor port?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I'm getting error as adobe Illustrator crashes while loading the multiple pages PDF file. Please help me. Thanks in advance.

Hi,
I'm getting error as adobe Illustrator crashes while loading the multiple pages PDF file.
Please help me. Thanks in advance.

Hi Monika,
I have downloaded the script to load the multiple page of pdf file.
I tried loading the multiple page PDF file via File Menu -> Scripts -> Other Script...
After executing the script file -> Browse and enter the page number - > OK
The PDF file is looks like created from word document. There are total 120 pages in this file.
PDF file size is 20 MB.
I'm still searching for the solutions. Please help me.
Thanks,
Lavprasad

Desktop Manager Will not Load. Hangs on splash screen when loading, then crashes

My desktop manager is not loading, and hangs whenever it is attempted to load. I have done a clean uninstall, removed rim registry entries, and did a fresh download and install 3 times with full shut downs between each attempt. I am running Windows 7 service pack 1 with an HP Laptop. It is an HP Pavilion dv6 Notebook PC. Product Number LY080UA. I hope that is enough information, but I will give more if asked and informed how to gather such info.
When I right click on the Desktop Manager Icon, I choose to run as Admin. Once it loads the splash screen shows. After a little bit (4-6 seconds) a small Icon appears in my systems tab at the bottom right of my screen. This stays for a little while and then goes away. After this happens the Splash screen hangs, and get a black border around it. If I click on the Splash screen it grey out and says not responding, prompting windows to ask me if I want to wait for the program or close. If I choose to wait, it will sit there and do nothing. If I close it will prompt windows to "look for an error" but has not yet been able to return an answer.
When I log into safe mode, Desktop Manager loads, but does not work well as only a bare bones set of drivers are enabled. If I turn off all but the non-essential services off using services.msc it will load, but again the services needed for it to run and the services for windows to be fully functional are not on at all.
I have attempted to turn off all but the Desktop manager in the start up, using msconfig, but that does not help either.
I am at my wits end here, and would really like some help with this. It loads up (desktop manager) on my Desktop, but I am unable to log that mammoth box around with me while I travel.
Thank you for your time and efforts, I will be very grateful for any and all help.

I'm having the exact same problem here! I'm running Windows 7 Ultimate SP1 x64. Please help! This was posted a month ago.

BB 9700 - Desktop Manager Crashing when Sync'ing Address Book

Hi all,
At work, we use Novell Groupwise. Calendar syncs fine, but BB Desktop Manager crashes when I sync addresses. I can load one-way from the computer to the BB, but not the other way. I may have a corrupt address, but haven't been able to get it all to work. What do I do to stop this?
thanks
Rowdy

Hi and Welcome to the Forums!
First, make sure that the version of GroupWise you are using is compatible with the version of the RIM DTM software that you are using:
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
Assuming it is so, then the next steps will depend on the error messages when it "crashes". If you have any text of that, you can try searching for it in the public KBs:
http://www.blackberry.com/btsc/microsites/microsite.do
You also can activate advanced synchronization logging to see if the log provides you with any better information:
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BB Desktop Manager crashes trying to sync BB 8900 T-Mobile

I work with the tech support for my company's IT department. We are tasked with providing support for any technical issue our users encounter. I am working with one user who is having issues with his BB Desktop Manager crashing out with a generic error whenever he tries to do a sync. Here are some of his details...
He was using BB Desktop Manager 4.3 I think and had a previous model blackberry device. Our organization uses Lotus Notes. He was previously syncing the email with Lotus and the Contacts and Calendar with Outlook. He upgraded phones to the BB 8900 (he is on T-Mobile) and upgraded his BB Desktop Manager to v4.6. When he first ran the setup, he did not tell it to sync the Lotus organizer data. He performed one sync, but nothing came over at all. He then went in and checked the LOTUS ORGANIZER data, but every time he tries to Sync, the BB Desktop Manager sits there for about 45 seconds, then it just closes with a generic error referencing the BlackberryDesktopManager.exe.
When that happens, we can open the Desktop Manager, but the PIN connection shows NONE until he actually unplugs and re-plugs in the phone.
If we try to go into the SYNCHRONIZE section and then hit the button that would normally show the sync settings, we get the same exact type of crash (but it happens almost immediately instead of waiting 45 seconds).
Here is what we have tried to do to fix it. We have completely removed and re-installed the BB Desktop Manager (but we have tried v4.5 and v4.7.) Each time we are uninstalling the software, I made sure to REMOVE USER FILES and then I am also going into the PROGRAM FILES folder and deleting the RESEARCH IN MOTION folder so it shouldn't be keeping any of the files from that folder. We also tried wiping the phone (three times) - twice by putting the PIN in wrong 10 times, and then once by calling T-Mobile and having them walk him through doing it on the phone itself.
We still have the same exact crash at the same exact places on all versions of this software for this model phone. If he had another computer to try it on (that also has Lotus) I would have him try to setup the phone on another PC. Since the phone has been wiped many times, I am thinking its something on the PC thats causing the crash, but I am not sure where to go or what to check next.
We have worked with this guy for a total of over 12 or 13 hours, and we have no idea what to try next. This is baffling many of our technicians trying to figure this out for him.
Does anyone have any clue why it may be doing this, or have any ideas what I can check next? Are there any logs I can collect or upload that may help identify whats going on?
Any help or suggestions would be GREATLY appreciated!
Thanks!

I work with the tech support for my company's IT department. We are tasked with providing support for any technical issue our users encounter. I am working with one user who is having issues with his BB Desktop Manager crashing out with a generic error whenever he tries to do a sync. Here are some of his details...
He was using BB Desktop Manager 4.3 I think and had a previous model blackberry device. Our organization uses Lotus Notes. He was previously syncing the email with Lotus and the Contacts and Calendar with Outlook. He upgraded phones to the BB 8900 (he is on T-Mobile) and upgraded his BB Desktop Manager to v4.6. When he first ran the setup, he did not tell it to sync the Lotus organizer data. He performed one sync, but nothing came over at all. He then went in and checked the LOTUS ORGANIZER data, but every time he tries to Sync, the BB Desktop Manager sits there for about 45 seconds, then it just closes with a generic error referencing the BlackberryDesktopManager.exe.
When that happens, we can open the Desktop Manager, but the PIN connection shows NONE until he actually unplugs and re-plugs in the phone.
If we try to go into the SYNCHRONIZE section and then hit the button that would normally show the sync settings, we get the same exact type of crash (but it happens almost immediately instead of waiting 45 seconds).
Here is what we have tried to do to fix it. We have completely removed and re-installed the BB Desktop Manager (but we have tried v4.5 and v4.7.) Each time we are uninstalling the software, I made sure to REMOVE USER FILES and then I am also going into the PROGRAM FILES folder and deleting the RESEARCH IN MOTION folder so it shouldn't be keeping any of the files from that folder. We also tried wiping the phone (three times) - twice by putting the PIN in wrong 10 times, and then once by calling T-Mobile and having them walk him through doing it on the phone itself.
We still have the same exact crash at the same exact places on all versions of this software for this model phone. If he had another computer to try it on (that also has Lotus) I would have him try to setup the phone on another PC. Since the phone has been wiped many times, I am thinking its something on the PC thats causing the crash, but I am not sure where to go or what to check next.
We have worked with this guy for a total of over 12 or 13 hours, and we have no idea what to try next. This is baffling many of our technicians trying to figure this out for him.
Does anyone have any clue why it may be doing this, or have any ideas what I can check next? Are there any logs I can collect or upload that may help identify whats going on?
Any help or suggestions would be GREATLY appreciated!
Thanks!

Efi detects wrong resolution - osx crashes while loading loginwindow.app

Hello,
I have a strange problem: Sometimes EFI loads OS-X with wrong display resolution which ends into a crash of loginwindow.app.
Let me explain it in more details: First I had a system with rEFIt. Everything worked like a charm ... until on some day (I think it was EFI Update 1.5.1, but I don't know it exacly) my mbp rev3 sometimes decided to show EFI menue much larger as you would expect it on a 640x480 display. This happens in about 3 of 4 boots. If this happened, OS-X crashed while loading loginwindo.app and Windows crashed before showing the windows loading screen.
Then after talking with some guys in irc unofficial support I reinstalled everything because they said all my 3rd parity software could be the reason for this error. Now I have a fresh installed leopard and the error still occures - and the error also occures when I boot into leopard disc.
*To describe the problem in a few words:*
- EFI detects display resolution wrong in about 3/4 boots
- loginwindow.app crashes if EFI detected resolution wrong
- while crashing some strange artefacts are shown on grey apple screen / on verbose mode console, sometimes screen gets orange for about 0.1 sec before artefacts are shown
*I tried following things to fix the problem:*
- reset vram: no result
- verbose mode: does not show anythingnew compared to right boot, after message "loginwindow.app is loading" "login windoe application started" i get some artefacts and the orange screen
- single user mode: did't find something in logs, but I also didn't find an efi log
- hardware diagnostics: says everything is right
- Firmware Restoration CD: does not work because my mac seems to think that everything is right.
- plug off all external usb devices: no effect
Now I really don't know what to do, I don't even have an idea where to find this error and what to try next. The mbp is my only computer, so I would find it excellent to solve the problem for myself.
Thanks for any help what to do
Message was edited by: TheInfinity

I'm not sure why you're password is wrong when you type it directly in your station, but I have found something related to remote logging.
I had always gotten the password wrong when I tried to connect through VNC from my Linux to my Mac. The problem is that for some reason, my keyboard layout is applied twice. I'm using the colemak layout, so if I want to type 'K', I need to click on the key that is marked 'N' in QUWERTY keyboard.
BUT, through VNC to my mac, if I want to type 'K', I need to type the key that is mapped to 'N' on colemak layout, which is the key marked 'J' in QUWERTY.
So to type hello, through normal colemak, I would click on hkuu;, but through VNC to the mac, I need to click on hniip.
Here's the map that can be used to generate the above:
Qwerty -> Colemak
k -> e
n -> k
j -> n
e -> f
h -> h
u -> l
; -> o
p -> ;
i -> u
My solution was to find out how my password should be typed with double-applied colemak, then after log in, change the keyboard layout to QWERTY, and then it is applied only once and I can type in normally. I'm not sure what's the cause of the bug, but at least you have something to try..

LV crashes while loading my llb, but the built app. functions correctly???

I�m hoping someone may understand the cause of the LabVIEW crash I�m experiencing.
LabVIEW 6.1 crashes and Windows 2000 says, "LabVIEW.exe has generated errors and will be closed by Windows" when I try to load an llb by clicking on the top-level vi from within LabVIEW or when opening the llb from outside LabVIEW. It crashes while loading particular sub-vi�s of the llb. If I try to load the offending subvi�s directly, I also get the same crash. If I build the llb into an application, the build goes smoothly and the resulting application functions correctly. If I use a �splash screen� approach and do not load the offending sub-vi�s (by not opening vi references to them), they load-up fi
ne when the top-level vi loads and then I am able to edit and re-save any vi of the llb including the offending sub-vi�s. I�ve tried re-saving the llb as a separate development distribution and still get the same crash behavior. I�ve also tried saving the offending sub-vi�s to separate files outside the mother llb (after getting them open with the splash screen approach) and I get the same crash when I open these files. If I save one of the offending sub-vi�s as a separate llb, I can�t get it open even with the splash screen approach. I�ve loaded the latest video driver for my Dell Inspiron 8100 laptop and I get the same behavior on a Dell Dimension 8200 desktop that is also running Windows 2000 (Version 5 SP4). There are 110 objects in my llb that includes *.vi�s, *.rtm�s, and *.ctl�s.. Any ideas as to why/how this is occurring and how I can fix it? Is this a known 6.1 bug that is fixed in 7? Any info would be greatly appreciated. I�ve included my splash screen like loader, f
or what it�s worth. Thanks.
Attachments:
__loadVIs.vi ‏88 KB

Thanks for responding. Your understanding is correct. Mass compiling was one of the first things I tried (although I failed to mention it). I also un-installed and re-installed LabVIEW. It crashes during mass compiling of the full llb, although the vi that it appears to be working on when it crashes is not an �offender�, i.e. I can open that vi fine. The crash during mass compiling is the same crash, i.e. Windows says it had to close LabVIEW because it generated errors.
I�ve attached one of the offenders. It is missing many of it�s sub-vi�s so you�ll have to hit �ignore vi� a bunch when opening it. (The llb of it is ~2.6 MB. I thought that might be too big/rude to post.) This vi crashes LabVIEW upon mass compile or upon opening it (after hit
ting �ignore subvi� a bunch).
I was going to attach an llb of another smaller offender, but in the process of editing it to be a little prettier and better documented, the problem kind of vanished for that vi. The main routine still crashes when I mass compile the full llb, but now I can open some of the old offenders without incident. I still can�t open the main routine directly as it crashes LabVIEW. Thanks for your time.
Attachments:
aveParam.vi ‏769 KB

JVM Crash while loading StackFrame

# HotSpot Virtual Machine Error, Internal Error
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.2_04-b05 mixed mode)
# Error ID: 53414645504F494E540E4350500159
# Problematic Thread: prio=5 tid=0x008cf798 nid=0x8a8 runnable
I would get very similar or same error like above.
I have got around it, but I would like to find out why it was happening.
If you look at following function, you will notice this.get_ID() call.
I used to pass "this" object instead of this.get_ID().
If I replace this.get_ID() with "this" object JVM would crash while loading stackframe.
Also, it would crash around while loading
"Iterator Keys = m_UserCollection.getKeys();"
Does anybody have any idea what might have caused above function to crash while loading stackframe?
Thanks in advance.
public void setUsers(UserCollection value)
if(m_UserCollection == null)
m_UserCollection = UserFactory.GetUsers(get_ID());
UserCollection inCol = value;
Iterator Keys = m_UserCollection.getKeys();
while(Keys != null && Keys.hasNext())
Object key = Keys.next();
User current = m_UserCollection.getm_users(key);
User newUser = inCol.getm_users(key);
if(current != null && newUser == null)
current.RemoveFromGroup(this.get_ID());
else
inCol.Remove(key);
Iterator enums2 = inCol.getKeys();
while(enums2.hasNext())
inCol.getm_users(enums2.next()).AddToGroup(this.get_ID());

Hi
Did it dump out where the function name is?
Is it happening consistenly?
Can u try running with -XX:+PrintCompilation and show the last few printed line? You will see something like
11 b java.lang.String::lastIndexOf (67 bytes)
Thanks.

Lighroom crashed while loading new pictures.

Lightroom crashed while loading new pictures. Cannot open it anymore: cannot read cache. Downloaded a new version: my license number is not valid???? What's next?
Thanks. Dany

Sorry for the lack of info. I wasn't sure how this forum thing worked...
Here are the details:
LR 5,7 crashed while loading pictures. I was away for a moment, when I went
back to the computer, I had to reenter my session and try to reopen LR.
OS is Windows 7 Pro
Message: LR encountered an error when reading from its preview cache and
needs to quit.
When I restart it, it still shows the same message and doesn't open. I
downloaded a new version (5.7.1) and if I enter my serial number it doesn't
recognize it. If I click on Trial, it shows the same error message...
Thanks,
Dany
2015-03-25 9:49 GMT-04:00 F. McLion <[email protected]>:
Lighroom crashed while loading new pictures. created by F. McLion
<https://forums.adobe.com/people/F.+McLion> in Photoshop Lightroom - View
the full discussion <https://forums.adobe.com/message/7348060#7348060>

My ipad crashed while loading Ios7

My IPAD crashed while loading IOS7. Now I can't restore back to factory condition neither new os is laoding.
So I took my IPAD to nearby Apple store, and apple tech can't fixed it either. After over hour of waiting, Apple tech first told me to Pay $299.00 for the replacement unit and after I refused to pay first time, then they lowered the price to $99 for the refurbish replacement unit with 3 months warranty.
Apple tech tried to fix my IPAD for couple of hrs. and only thing they could say is that my IPAD is getting generic error 101, that means it has a hardware and or software failure but can not pinpoint to the issue. There is no damage or issue prior to downloading the new OS.
Can anyone advise me what I shoud do? Thanks.

I would suspect that there is an internal hardware failure in the iPad and it will have to be replaced.

SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme

Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type:        Error
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              17806
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type:        Failure Audit
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              18452
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

I have an 08 apple desktop and my ipad mini wont connect with my itunes and i cant find updates to fix this what do i do?

i have an 08 apple desktop and my ipad mini wont connect with my itunes and i cant find updates to fix this what do i do?

From Apple's website and printed on the box the mini came in:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 2 or later
Download iTunes at www.itunes.com/download
You will have to update to at least OS X 10.6.8 or later, otherwise known as snow leopard.

Desktop Manager will not load..help!

Each time I attempt to load the program, it locks up and the new window is shaded in grey. Cant open any options or click any icons. I followed the instructions for a clean install (twice) and downloaded the latest version of desktop manager. Any ideas would be greatly appreciated. It had been working properly then took a dive out of nowhere...awesome eh?
I am running windows xp-64 bit and I have a bb curve 8310 with ATT.

Hi and Welcome to the Forums!
Since you said you tried a "clean install" (as opposed to clean uninstall), I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help Needed w/Desktop Manager 4.6 & Outlook Calendar Synch

Everything was working just fine prior to my holiday break. Came back this morning and attempted to synch my BBCurve (running 4.5.0.81) with my Desktop Manager (v4.6) and it is just skipping over the calendar sync portion. No error message. Everything else is synching just fine. Deleted and reinstalled Desktop software -- that didn't work. Disabled calendar sync and re-enabled -- that didn't work. cleared the BB Calendar of all entries and now have no calendar entries on the device. HELP!

I deleted the Intellisync folder, and reset the Desktop Manager configuration settings and I received the following Intellisync error message:
The operation terminated unexpectedly while reading from Microsoft Outlook Calendar
Then I tried to sync just from Outlook Calendar to Device -- that failed
Then I tried to sync just from Device to Outlook Calendar -- that failed as well
Then I deleted Intellisync folder again and rebooted my computer
Successfully synced from Device to Outlook
Tried to sync from Outlook to Device and it appears to be running, says one moment please and nothing happens and it returns to the Desktop Manager with no error message. Grrrrr.....

HELP-HELP-HELP Desktop Manager Crashes while loaded or connected with BB

Similar Messages

Maybe you are looking for