Help!Help!I render RED clip in Color.But Progreess "cancell"in Render Queue

Color 1.5.3 final cut pro 7.0.3 red fcs installer v30.3
HelpI render RED clipproxy(redcode) in Color.But Progreess always "cancell" in Render Queue.why?Help!

1.I have the enough disk storage space allocated for my render directory.
the output from color.I choose the prores,uncompressed,different size.It came to the same thing.
Then I only render one clip(about 40s),it lead to Progress "Cancelled".
and then I used redcine,redrush,clipfinder and redalert.transcode to prores!
I use macbook pro,imac,Mac Pro to test!came to the same thing!
But the prores video display green screen or frame skip.
i really don't know what to do now！
I doult if the red videodatabase is wrong?But read the redcode video is normal in final cut pro.
Hope everyone to help me!

Similar Messages

My iphone 3gs dont have a red and green color can you help me how to fix it

please help me my i phone dont have red and green color how to fix it

If you have the old phone, connect it to iTunes, right click on the device, and choose transfer purchases. If you no longer have the old phone, I don't believe there is a way to recover them, as they were on your original device.

Please help, i used to have various colors to select from when selecting FILL in Keynote such as red, now I only have a few pastel colors. I cannot seem to fix this problem to get the original colors back. Can someone please advise what I need to do.

Please help, i used to have various colors to select from when selecting FILL in Keynote such as red, now I only have a few pastel colors. I cannot seem to fix this problem to get the original colors back. Can someone please advise what I need to do.

i have on my ipad2 and re-download it - but I can't afford to loose the presentation that I currently have ....??
Are you using Keynote on an iPad?
If so you posted in the wrong forum, this is the Keynote Mac discussion and it is a different application. I dont know how the iPad works at all, so I cant help you, post in the Keynote iOS discussion.
If you are using a Mac, the colours palette is accesed by clicking on the colour well (arrowed) and then selecting a colour chip or changing the color in the colour wheel.

In the icon of phone i see a red point of voicemail but i don´t have a voicemail help me!

in the icon of phone i see a red point of voicemail but i don´t have a voicemail help me!

Welcome to the Apple community.
What you have purchased is additional space in iCloud (online storage) you have not purchased nor can you purchase additional space on your iPad, which is where the TV shows are trying to download too.

Help, I imported photos into my ipod , but it's shown as white color...

help, I imported photos into my ipod , but it's shown as white color...
not as the orginial photos at all,
and it's really imported into my ipod,
and it's jpg format....help help.......

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Freeze clips after sending RED-Project to Color

I have a RED project, edited in Final Cut. there are some RED reference files consist from 2 RED clips. the clips in project are linked with the 4k reference files (-F.mov an the end) but in the file container there are 2 or 3 RED files the reference links to. in final cut no problem. but if I send the project to COLOR the clips freeze between the switch from RED-file 1 to 2. the only way I found to edit the red file direct to color. What can I do to make a good transfer from Final Cut to Color with mutiple RED files? Thanx!

Thank you for the information. it was very tricky to finish the project. The clips named ..._F.mov with Freezes in Color sent from Final Cut will be send back to Final Cut with the Freezes. So I made a new Video Track in Color and imported the original Red-Files (they have no Freezes anymore) and edited the lenght. I corrected them but Color doesn't send the new Video Track and the new material back to Final Cut... So in Final Cut I imported the in Color rendered .mov-files from the new material and this worked finally... I'll take a look at the colorfixer...

I am adding a voice over - it plays when I am in "clip trimmer" mode but NOT in the actual movie ... frustrating - any help?

I am adding a voice over - it plays when I am in "clip trimmer" mode but NOT in the actual movie ... frustrating - any help?am in

In Finder you will find the voiceover in the project's package contents folder. If on your internal drive, the project will be in your User (Home) folder Movies/iMovie projects. If on an external drive it will be in the iMovie Projects folder at the top (root) level of the drive.
Right-click (or Control-click) on the project name and select Show Package Contents from the pop-up menu. There should be a file named something like Voiceover Recording.caf in the package contents folder. Copy and paste this .caf file to the Desktop. See if it will open in QuickTime, GarageBand or another program capable of editing audio, such as MPEG Streamclip or Audacity (both free). If it will open, save (export) it in a different format, such as AIFF, preferably to a location where it will not be moved, such as iTunes.
Now drag that file into iMovie to the desired position (if in iTunes drag from iMovie's music browser panel). Hopefully it will now play correctly.
John
Message was edited by: John Cogdell

ARGGG Help with dreaded red X on wedding invite dvd

I made our wedding invitation on IDVD. I made a test copy - worked fine - but noticed two photo's weren't in the order that I wanted. I went back to the system, swapped out the two photo's - now I get a red X on the main startup menu and the system says I can't burn because menus are longer than 15 minutes in duration. This is new ...
I've tried everything - setting all durations to 0, eliminating 2/3rds of the chapters - nothing eliminates this dreaded red x.... and now I can't burn my movie - even though I could yesterday...
I read the help on here about setting durations to 0 - did that... still nada... no help - still the red X. I play the start up movie - it lasts all of 30 seconds... what am I doing wrong?

Instead of "Adding Title Menu" to each submenu - I was doing it to the first one - then copying the button and pasting it onto the other pages. This was my "smart" way of avoiding having to reformat the button every time - and to have consistency across pages. The problem is when you do that - it does something strange to the project - however, if I go to each page and go to the Plus sign and add the title menu button - it doesn't cause this issue.
Ideally I would like to be able to set font preferences for the entire project - but don't see where this can be done.

Can i label clips by colors in the timeline

Just as above, I am editing a music video and I would like to lable the clips that I defintely want to keep, in the timeline, by colors. Is there a way? I cant figure it out. Help is much appreciated. Thanks!

I don't think you can use colors but there are lots of other ways to organize. There is a great tutorial video you should check out: http://www.izzyvideo.com/final-cut-pro-x-tutorial/3-keywords-and-ratings-in-fina l-cut-pro-x/
Worth a look. Good luck!

Read yellow color from red and green colors

hi everyone
need help in extracting yellow color from red and green colors (RGB space).
before that, the B channel was set to zero.
can display RG and CMYK together (like Adobe Photoshop)?
thanks.
mySiti

hi everyone
need help in extracting yellow color from red and green colors (RGB space).
before that, the B channel was set to zero.
can display RG and CMYK together (like Adobe Photoshop)?
thanks.
mySiti

Can anyone tell me how to make a video clip in color transition?

Can anyone tell me how to make a video clip in color transition like the opening of "Oh Brother where art though" ?
You know the scene at the start where it starts off Black and White then as we move down the timeline it transitions to a rusty brown gradually.
It's on the Apple site for FC Studio as a promo clip.

how to do a keyframe trasition in the Color FX room
I realize that you can "add" keyframes to the timeline in COLORFX, but I don't believe they are always observed, and then they usually disappear in retrieved projects, and aren't persistent if you leave the room. To remember where they are... you might mark in a keyframe on those frames in another room as a pathfinder. The behaviour is consistent with a creature of the six-legged variety.
Method 1. If you are trying to taper the effect (any effect) in COLOR FX, the most linear approach is to render two versions of the clip; one "with", one "without" and do an opacity fade once you have returned them to Final Cut. This gives you the most control, flexibility, repeatability and consistency.
Method 2. You may attempt to keyframe the bleach bypass settings within the node itself -- the preset that comes with COLOR doesn't have any controls, but the Nattress plugin does.
Method 3. Set up a "blend" node with your bleach bypass feeding one of the inputs and leave the second input to default to the untreated video... keyframe a transition from "1.00000" to "0.00000" and that should work.
Note: the keyframe timeline markers will disappear from the timeline if you exit the clip, but the effect is likely to persist. At least that was what was happening a couple of minutes ago... for me, the effect and blend performed the transition just like it was previewing when rendered. This strategy is subject to being created and rendered "on the spot right now", and I advise making sure you have your renderqueue settings ready to go... load the clip from the COLORFX room using the Mac command bar at the top of the screen and render it right away. Don't try to save it for later. Just Do It.
An announcement went around about two weeks ago that Mr. Deakins' website was back up and running, so give him another try... poor guy has been swamped probably doing Dreamweaver maintenance... yeah, that must be it...
jPo

Rendering out 16:9 native clips from Color

Hi,
This may be a silly question...but I sent my project from Final Cut Pro 6 to Color -- footage was shot on an XL-2 at 16:9 with an advanced pull down (removed). So my timeline is DV-NTSC anamorphic 23.98 fps. Color recognizes the frame rate, but not the pixel ratio -- there is no output setting in the render queue for DV-NTSC ANAMORPHIC 16:9. Should I be rendering out at a custom 853x480 to achieve the correct results?
Thanks!
P.S. I should add that I tired rendering one clip at the normal DV-NTSC 720x480 setting and it came out squished into a 4x3 frame, as expected.
Message was edited by: JD Marlow

I don't know of a way to do it for all the clips, but 400 should only take you a few minutes.
Another option: Create an non-anamorphic sequence, edit in the shots, and then at the very end change it to an anamorphic sequence in the sequence settings. If you want to add more clips to the sequence, you'll have to go back to sequence settings and uncheck anamorphic.
Come to think of it, can you just go into the settings of the sequence you got from Color and change it to Anamorphic?
-Dan

Please help, video won't play in Premiere but audio will.

I have a video that was shot with a still camera that allows for short videos. The video is 30fps, 640x480 44100Khz audio.
When I play it in Windows Media Player it plays fine. If I import it in Adobe After Effect it play fine, but when I import it into Premiere, the audio plays fine, but the video plays like there are only 2-3 frames and that's it. the clip is the correct length, visually. Can anyone help? All other clips imported fromvideo cameras work fine.
Thanks,
Roberto Cerini

Your clip probably uses the MJPEG codec.
If you can't find one that works for you then the following links will help you:
FAQ: How do I import xyz format files?
FAQ:How do I convert my files?
Cheers
Eddie

I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I

I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
Thank you.

Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.

Why am I having trouble importing vCards? I follow the Help Center instructions by dragging and dropping, but some don't sync into the cloud. And why can't I drag multiple vCards? I have over 4,000. Please tell me I don't have to do one at a time?

Why am I having trouble importing vCards? I follow the Help Center instructions by dragging and dropping, but some don't sync into the cloud. And why can't I drag multiple vCards? I have over 4,000. Please tell me I don't have to do one at a time?

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

Help!Help!I render RED clip in Color.But Progreess "cancell"in Render Queue

Similar Messages

Maybe you are looking for