HELP!!! HELP!!!  My Iphone just stopped working!

I just bought my Iphone a couple of months ago and the same thing happened.
It just quit working.
I tried doing a hard re-set by holding the buttons down for 5 minutes! Hands are still cramping. I tried to charge it and nothing happens. Just a black screen. I left it to charge for 8 hours and nothing. What to do? Its been more than 30 days so I can't return it!
Bon

The iPhone includes a one year warranty. The 30 day return window is for returning an iPhone for payment credit, not for an exchange under warranty.
If you are in the U.S., call AppleCare or make an appointment at an Apple store if there is one nearby.

Similar Messages

  • My iPhone just stopped working; it does not start up

    My iphone just stopped working; it does not start up!

    Try resetting it:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

  • My iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work, my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work

    my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work, my iphone just stopped working, i cant get it to turn on i tried plugging it into itunes and it still doesnt work

    Hello there, LaruaGalliers.
    The following Knowledge Base article provides some great troubleshooting steps for your issue:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Particularly:
    Battery does not charge
    Verify that the outlet being used is working.
    Try another USB power adapter if available.
    If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
    Try another USB cable if available.
    iPhone or iPod touch displays the low-battery image and is unresponsive
    If you see the image below, charge the iPhone or iPod touch with USB power adapter for at least 15 minutes.    
    You should see this image when iPhone or iPod touch begins to charge:
    If the screen still displays the low-battery icon, try turning the iPhone or iPod touch off and then on again.
    If the issue persists, follow these troubleshooting steps.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • IPhone just stopped working

    iPhone 4 just stopped working over night, just black, cannot get any life at all. Put it on charge but not any thing can any body help me.

    Hi kimbrook,
    If your iPhone is unresponsive, you may find the Power/Battery portion of the following article helpful:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Regards,
    - Brenden

  • My iphone just stopped working today. What could problem be?

    My iphone just topped working.  What happened?

    Backup your iPhone, then restore it. If it's still not working then try holding down the home button and the Lock button at the same time for 15 seconds, it will go into DFU mode. Can you give us anymore information on what you was doing? Did you just wake up to it not responding? is the phone off? can you hear anything from it? (Have you heard text noises etc) is itunes finding the phone? any sync errors etc? All of this could help determine the problem. If restoring the phone worked, try then restoring back to the Backup file so you've got everything back and you should be up and running ready to go.

  • Yahoo mail on iPhone just stopped working

    I've been using Mail to access my yahoo mail account for years, and yesterday it just stopped working on my iphone4 and iPad. I updated to iOS 4.3 a while ago so it was fine since then. I get the typical error message that the server can't be reached. Any ideas?

    Looks like yahoo issued a fix. Mail is working again.

  • My iPhone just stopped working. I've tried charging it and turning it on and nothing works.

    Hello, my iPhone recently stopped working - I tried plugging it up to charge and that hasn't worked. I even took it out of the case. It still won't turn on. Is there any solutions?

    See Here for  >  Frozen or unresponsive iPhone
    Try this First... No Data will be Lost...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Help MWI light just stopped working.

    I have a client we deployed a UC560 system.  Everythign was working but now the MWI lights stopped working.  I have checked everything I can think of but I can not get them to light up.  Any ideas would be helpful.
    I have attached a config.  Below is what I have from the CUE module.
    se-10-1-10-1# show ccn application
    Name:                                   ciscomwiapplication
    Description:                            ciscomwiapplication
    Application type:                       aa
    Script:                                 setmwi.aef
    ID number:                              0
    Enabled:                                yes
    Maximum number of sessions:             6
    CallControlGroupID:                     0
    strMWI_OFF_DN:                          A801
    strMWI_ON_DN:                           A800
    Name:                                   msgnotification
    Description:                            msgnotification
    Application type:                       aa
    Script:                                 msgnotify.aef
    ID number:                              1
    Enabled:                                yes
    Maximum number of sessions:             12
    DelayBeforeSendDTMF:                    1
    logoutUri:                              http://localhost/voicemail/vxmlscripts/mbxLogout.jsp
    Name:                                   voicemail
    Description:                            voicemail
    Application type:                       aa
    Script:                                 voicebrowser.aef
    ID number:                              2
    Enabled:                                yes
    Maximum number of sessions:             12
    logoutUri:                              http://localhost/voicemail/vxmlscripts/mbxLogout.jsp
    uri:                                    http://localhost/voicemail/vxmlscripts/login.vxml
    Thanks
    Todd

    It could be any number of things, but in your config you have:
    ephone-dn  598
    number A801...
    mwi off
    ephone-dn  599
    number A800...
    mwi on
    yet all your numbers appear to be 4 digits; i.e. you'd need "number A801...." and "number A800....".  There could be some translation and such going on.  Otherwise it might be necessary to run some debugs (from CUE, you could do a 'clear trace', 'mwi refresh telephonenumber XXXX', then 'show trace buff long' and see what it's getting back.  CME would have some debugs, too, but at least you'll get some basic info on whether it's getting rejected or not.

  • HELP my iphone 5C stopped working

    i tried to update the software on my phone 5c but it stopped working, now it says connect to i tunes but nothing works

    Hey jomoloney,
    Thanks for the question. It sounds like you may need to restore your iPhone in recovery-mode:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    If your device is not recognized in iTunes for Windows while in recovery mode, see this article (Specifically Step 5, sub-step “If the device is not recognized while in Recovery Mode”)
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • Help.. ipod just stopped working!!

    My ipod pretty much has just stoped working. i didnt drop it or anything. i always use it in my car and it use to work fine but all the sudden it would just freeze..and i would have to wait for the battery to die so it would unfreeze. but then the same thing would happen again once i tried to play a song. the song would play for about 30 seconds before freezing. i have no idea what is wrong with it or how to fix it. i was reading other peoples post and people were saying to restore it?? i dont know what that is or how to do it.

    Tara1m,
    Welcome to the discussions.
    Try resetting first, and then restoring if problems persist:
    Resetting the iPod
    Restoring the iPod
    JC

  • HELP iPhone just stopped working

    i can ring my phone but nothing happens wont start or anything even long press the power button wont work. 

    give it a reboot, hold the power and home button together for 10 to 15 seconds or until you see the apple logo and then release.

  • Help deskjet 2540 just stopped working and wont connect

    please help 
    Have new imac and HP2540 PRINTER for my 12 year old daughter worked opreviously and now just wont print its saying unablw to connect to wireless router what do i do 2 days in cant get it to work !

    Hi,
    Trying conecting the imac and printer using a usb cable first and then try to setup the wireless connection from there.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • HELP! iPhone has stopped working

    So I tried to restore my iPhone to original settings and it wont restore.
    Error (1013) keeps occuring amongst other things.
    My iTunes is up to date as is my microsoft security.
    My phone turns on and says I need to plug into iTunes (like when you first get it) but when I try to restore it the error keeps coming up.
    What can I do?

    Well an iPhone 4 should still be under warranty, so you could always take to an Apple Store and have it looked at.
    http://support.apple.com/kb/ts1275
    As far as error 1013 goes here is what Apple says in the document:
    Error 1004 and 1013: This error may be the result of the connection to gs.apple.com being blocked, redirected, or interrupted. Adjust your hosts file or security software to ensure that connections to gs.apple.com are not blocked. If the issue persists, try restoring on another computer with a known-good connection. If this restore is successful, you will need to contact whoever supports your install of the operating system and security software installed on your computer for assistance. If your hosts file redirects requests to gs.apple.com, you may choose to follow Can't connect to the iTunes Store, in the "The 'hosts' file may be blocking the iTunes Store" section.

  • My macbook will not turn on, the charger blinks between green and orange and the charge indicator on the side shows no light. HELP nothing happened just stopped working out of the blue

    I don't know why but my computer will not turn on! Less than 6 months old!

    If you have access to an Apple Store or other authorized Apple specialist with service department, you could take the computer in for diagnosis and repair under the AppleCare plan. Or the complementary coverage that comes with the computer if you did not buy the extended plan to add a few more years on the basic one. With the basic plan, you have 90-days support; if you bought the AppleCare extended plan, you have a total of three years support and service. Within the first year (from day of original purchase) you can buy the extended plan. Without it, a fee may be charged to test the computer. Or if there is an Apple Store with Genius bar, you could arrange to get an appointment there, and there should be no charge (in USA) to diagnose the problem.
    You can get started online, by visiting Apple Support:
    http://www.apple.com/support/contact/
    Not sure what is wrong with the computer, but an expert could tell.
    Also if you have an Apple Store nearby (or within reasonable distance) you could call ahead to set an appointment to talk to a Genius, and have them look into the issue(s) the computer may have. One determined to need repair under AppleCare can be handed off, there.
    Did you have a backup method in place to save your work off the computer, such as TimeMachine and external hard drive? I mention this because a computer going into the shop for possible repair may lose its content, and the hard drive or other parts may have failed, so your saved stuff in there could be lost.
    Hopefully they can get the problem solved.
    Good luck & happy computing!

  • My iphone just stopped working at all, what can i do?

    argh someone help...i put down my iphone 4 on the table working in the night, but when i get up, its totally dead!
    i have only had it 2 months, i thought maybe the battery was too flat, but it wont even charge... its never been dropped or
    spilt anything on it. so i'm baffled by this... i have to send it for repair by tmobile, but that takes 2 week minimum...has this happened to anyone else???
    any tips to get it working myself?

    As in the user guide, try restarting, resetting, restoring in that order.

Maybe you are looking for

  • Why my voice memos & notes disappear?

    Suddenly to my horror today when I check my voice memos playlists most of my voice memos are gone from my iphone. I did not tweak around with my iphone or itunes. I backup my iphone regularly to my itunes PC and the voice memos are still in my itunes

  • OSB File append

    I have setup a File protocol based Business Service in OSB. This Business Service is called by a Proxy Service after setting the file name in the outbound transport header and assigning the text to be written to the file. When executed, the file is s

  • Microphone headset with MacBook Pro

    Hi, I recently started playing a game on my Mac that requires a microphone headset to get the most out of playing online. But since there is just one "slot" (I can't remember what it's called) to plug into, and a microphone headset has two plugs, I h

  • Battery status not updating

    I have recently replaced the battery for my IPhone5 after a crash. After that the battery status indicator is not dynamically updating. It updates only after every restart. I tried resetting all settings, updated to recent IOS7.1, restored several ti

  • How I can make one order analyze from one waveform?

    I have one file waveform with two data, first with analog pulses of the rotation and the one other with the vertical acceleratin. I can make an order analysis and the waterfall. I only obtain to separate the data in two waveforms and make fft?