HELP HELP!!! Needed help for system recovery
I have a satellite A505-S6035
I made the restoration disk and made a system restoration using that DVD's one year back to make a new partition and everything went fine.but today my system crashed and I tried to restore from HDD ,by pressing zero on the start up and it wont.I work tried the DVD and it boots...but it staying long time saying copying files......I think some problem on the DVD as I felt some noise from the CD drive that cannot read properly.I removed this HDD and connedted externaly with another PC and realized that c:\\ already formated and some files has been copied there. D:\\ have no problem and all my datas are there.i found another partiton too for the recovery @ 2GB but i coudn recover from
what i should do in this situation ..pls help
Just a few thoughts: Did you cut all power to your computer [include battery and ac] prior to trying to restore, and try toggling zero key when turning on to restore. If this doesn't get computer and/or HDD restore to operate, is other machine you used to read HDD compatable; could you restore HDD on other machine if needed, then try in this one?
Similar Messages
-
What software is needed for system recovery? (cont'd)
What software is needed for system recovery of a Toshiba Satellite Pale8u-02p01D (also known as L355D-S7901) running Vista?
If I can just get the name/number for the recover software I will get it from eBay.
Thanks!
Solved!
Go to Solution.Satellite L355D-S7901
If you want to look for that on eBay, look for the recovery discs for the model above. I doubt you'll find them there.
You can order them from Toshiba, of course.
Order Toshiba Recovery Media
And you might get them cheaper from a third-party vendor.
Digitalmedia-labs.com
MyRecoveryCDs.com
Recovery-CD.com
RestoreDisks.com
RestoreCD4u
-Jerry -
Help! Had to do System Recovery & Now Files are all screwed up!
3 days ago my computer got a Virus & deleted almost everything off my computer. I had to do a System Recovery to Recover my files. I have a 80GB Video Ipod. I had my Itunes Library Very organized the way I wanted it. Now when I go to my Library, my Music is still there but all the Song Names & Artist Names.. etc.. are all screwed up. My Ipod has my Music files the way i Want them to be organized. How do i Transfer my Files From My Ipod to My Itunes Library without it syncing & adding the Unorganized files to my ipod?
80 GB Video Ipod Windows XPNow, itunes will allow me to link my ipod to download songs, but some of my purchases, it will not recognize.
try playing one of the purchases in itunes for a few seconds. do you get asked to authorise the PC? if so, and if you do, will the purchases transfer to the ipod afterwards? -
HELP! Need help generating TEXT-ONLY portal page...
Text Only Portal Question:
PLATFORM:
=================================================================
Sun Solaris (5.2 if memory serves) for db and mid-tier, running
8.1.7 DB and 3.0.9 (1.0.2.2) portal.
THE NEED:
=================================================================
I need to display text only portal pages. Some of the more
detailed concerns at this point are below. Also, I've had an open
tar on Metalink for about two weeks, and after research from
their end has resulted in no help.
THE ISSUES (so far):
=================================================================
IMAGES:
If an anchor [A HREF=...] tag uses an image as it's "text", I
need to strip out the ALT= text to show inside the anchor. If no
ALT text is available, then I would like to show the image name
as a default.
For example:
<img src=home.gif
alt=Home>
should display as:
Home
FORMS:
How do I get the resulting page from a form (which include the
login inputs and submit button, search box, advanced search page,
etc.) to be displayed by the text only page?
For example:
When a form is called, the <FORM> elements are as follows:
METHOD=GET or POST
ACTION=url (relative or absolute) to the script.
In this case, the action value is:
ACTION=/servlet/page?
pageid=6&dad=portal30&_schema=PORTAL30.
This calls the advanced search API.
I would expect that to redirect the browser back to some
text-only version, the ACTION= element would have to be changed
to be something like:
ACTION=[pathscraper]?/servlet/page?
pageid=6&dad=portal30&_schema=PORTAL30
REDIRECTION:
What happens when portal pages redirect internally? How do you
get back to the text-only page?
For example:
The login link on the standard Oracle Portal home page flips
from url to url to get to the actual login page. Our
implementation of Oracle portal goes from
[DOMAIN]/pls/portal30_sso/portal30_sso.wwsso_app_admin.ls_login
to [domain]/pls/portal30_sso/portal30_sso.login_page.
Since this is standard Oracle redirection, how can it be
intercepted so the portal30_sso.login_page can be presented as
text only?
TRIED SO FAR:
=================================================================
I've written a socket/text scraper in Perl, running it from a web
server. The problems mentioned above are really causing problems,
plus the whole cookie thing. Since Oracle Portal tries to push a
cookie to the client, when the client is another UNIX server,
the cookie thing doesn't work.
POSSIBLE OTHER SOLUTIONS:
=================================================================
Something...anything. I've tried to think of some method to
create some sort of PL/SQL procedure to catch the content then
strip out the HTML calls.
An Applet to do the same thing, but on the client side, but
since time is an issue, coding a complete Java applet isn't
really an option.
THE CONCLUSION:
=================================================================
HELP! I need some help. This is for a client that is government
funded, and to meet Section 508 (part of the Americans with
Disabilities Act that states web sites and applications must be
made accessible. A text-only page is one of the requirements for
an accessible page.
Thanks,
Ryan Stefani
ps: feel free to contact me via [email protected] or
[email protected]Use Find/Change and the GREP tab.
Search for .+ and set the Find formatting to find the charcteristics you want.
What will you do with this text once found? You'll need something to "change" to, either new text or Change Formatting options... -
Help. Need code for string verification
I am trying to create a swing program that will verify a string then move a directory from a CD to the users hard drive. I have tried many different combinations of code with no success. I simply need a window with a text pane and a button that when clicked copies the content of the windows clipboard into the text pane, then compares it to a predefined string, then moves a directory from a CD to the harddrive.
It seems very simple but I am new to java, with alot of c++ experiance, and I cant seem to get it to work. If someone could help me out here it would be much apprecaited. Thank you and sorry if I am not using the correct terminology, I tried to be as clear as possible.Here is the code: I just decided to make it command line instead of a GUI; I had too many problems.
The code runs fine but for some reason i get this error when you get to the part about copying the file:
123456789
Verification complete copying files.
Exception in thread "main" java.io.FileNotFoundException: C:\copy (Access is denied)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileReader.<init>(FileReader.java:55)
at CompString.main(CompString.java:20)
Java Result: 1
BUILD SUCCESSFUL (total time: 5 seconds)
Here is the code:
import java.io.*;
import java.io.File;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
public class CompString{
public static void main(String[] args) throws IOException{
System.out.println("Please go to http://mytatwear.com/verify.html and follow the instructions");
BufferedReader bf = new BufferedReader(new InputStreamReader(System.in));
System.out.println("Please enter number provided on the website");
String str1 = bf.readLine();
String str2 = "123456789";
if (str1.equals(str2)){
System.out.println("Verification complete copying files.");
File inputFile = new File("C:\\copy");
File outputFile = new File("C:\\tearwear");
FileReader in = new FileReader(inputFile);
FileWriter out = new FileWriter(outputFile);
int c;
while ((c = in.read()) != -1)
out.write(c);
in.close();
out.close();
else{
System.out.println("The number is not valid");
I had tried to change the permissions on the folder so it is not "Read only" but whenever my program access's it it is for some reason read only.
Any help apprecaited -
Help! Need driver for Lenovo webcam model 12-80401
Can anyone give me a link where i can download the driver software for my webcam? I just re-imaged my laptop before going out of town and loaded all my software except that :-(
Thanks,
BruceHi and welcome to the forum R-707!
*60 series never came with camera, lenovo started camera option with *61 series, what this means is that your system doesn't have integrated camera...
Hope this answers your question.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel -
Please help I need driver for HP2540 for Mac OSX 10.5.8
Hi There
I just purchased the HP 2540 deskjet and tried to install drivers but it seems that the CD only supports OSX 10.6 and up??? I cannot get printer to print anything so can anyone send me a link to the correct driver for me for OSX 10.5 or is there just no driver available?
Many Thanks in advance if you can help me!Sorry, but 10.5 has been officially unsupported by both Apple and HP for over a year, maybe two (I lost track).
You could try to substitute another driver from another HP model, but its a guessing game.
Update your driver set here: http://support.apple.com/downloads/HP_Printer_Driver_1_1_1 Restart your Mac after you install this.
It may be time to move on from 10.5.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Help! Need Part # for IQ804 AC Adapter...Please!
Hello All, I just bought a TouchSmart IQ804 that was missing its accessories... Can someone Please get the HP part number off of their AC adapter for me so I can order one (so I can turn this thing on) ... Thank You
PS: don't want to be a bother, but... any other part numbers from the accessories would be great also!!
Message Edited by RenaMan on 03-09-2009 01:13 AM
This question was solved.
View Solution.Sorry all,I forgot about this forum in my long adventure w/hp ...Thank you, to those that replied !!!!
I finally got the part from HP; the problem is that they expect a return, defective part when you order this (under warranty) so the part is restricted from sale on the retail side... as they explained to me!
The part numbers they used to order the parts ("brick" and a separate cord) are as follows:
Note: the "cord" is a typical PC power cord; if you have a spare one dont spend bother spending the extra $23.( I found three of them in my old parts box after i paid for one from HP...go figure)
Part Number: KT457-69003
Part Description: Power supply - Regulated 230W power output, power factor correction - For TouchSmart P
Total charge (including tax, if applicable): $121.85
Part Number: 8121-0740
Part Description: Power cord (Black) - 3-wire, 18 AWG, 1.9m (75in) long - Has straight (F) C13 receptacle (for 120V in the USA, Canada, Mexico,
Total charge (including tax, if applicable): $22.43
Hope this helps someone!! -
Please help!!!
A lot more information is needed.
Why do you believe someone else froze your iPad?
What is "everything" that you have tried? -
HELP! Needing BIOS for MSI RX3870-T2D512E not RX3870-T2D512E-OC
Hi all,
Could someone please post the original BIOS for MSI RX3870-T2D512E (not overclocked)? I am having problems with my RX3870-T2D512E-OC and I need to underclock it to RX3870-T2D512E. The original BIOS is required so that Live Update would work.
Thanks.Quote from: wildwild on 09-August-09, 09:28:59
Hi all,
Could someone please post the original BIOS for MSI RX3870-T2D512E (not overclocked)? I am having problems with my RX3870-T2D512E-OC and I need to underclock it to RX3870-T2D512E. The original BIOS is required so that Live Update would work.
Thanks.
Umf.. that crossflash can kill your VGA and void your warranty..
Quote
I am having problems with my RX3870-T2D512E-OC and I need to underclock it to RX3870-T2D512E.
Do it with software or RMA the VGA if its proved that's VGA fault. -
I bought a Zen Vision : M some days ago. It won't charge. I?have WinXP,Service Pack and WMP0. I got GOOD on everything on MyZenChecker. I use the USB at the back. I've also tried with a USB charger which I put into the wall, but that didn't work either. I tried fix2, but I didn't get everything on how to get it work.
I download it. Double click the .bat file. It comes a black route. It's written that it was succesful. Then after that what should I do in details, please ?
I tried to restart the computer right after getting successful on the .bat file with the Zen connected. Nothing happens after I turn it on again. No blue light or anything. The computer can't detect it. Am i supposed to connect the Zen after restart ? Should it come a blue light right after restart or should I let charge for 5+ hours without the blue light and then connect it again to get blue light.
Please tell me what to do in details step by step. Thx
Message Edited by perry_09 on 07-29-200706:56 AMyou shd connect it and reboot your PC. the myzenusb.bat is to amend your open up your USB permission. no blue LED light flashing means its not charging. I suggest you exchange this with your retailer since you just bought it
-
Help - I need help to know what format is best for FCE
I have a lot a various videos to convert for FCE. I have generally just converted them to MOV h.264 (these are not HD) and use these in FCE.
The problem is the video and audio all has to be rendered. Also if I want to add an audio filter I can't listen to it in Real time as it has to be re-rendered.
I am growing tired of watching the progress bar creep along.
Any ideas would be appreciated.
Thanks
RichSorry I should have mentioned it.
All for NSTC and the original is a recording done by GoToMeeting. It is a Windows Video Media Standard 9.
Usually I have to then play it and capture it as we don't want the full screen. I capture it with Snap Pro X, The result of that is an Apple Animation Millions IMA 4:1. with FPS of 10.
I then bring that in to FCE and put in Sequence and Render it. Can't do anything with the audio as it has to re-render it before I can hear it. After Render is has light blue lines above. After editing, it's exported as Flash FLV for the web. THe end size must be 720 pixels wide,
I have MPEG Streamclip but it has so many options, not sure what to use.
I have looked all over for something that talks about formats to use and have found nothing as they all seem to think the original Video is being imported from a camera.
Thanks for the response.
Rich -
I flight from Germany to Austria Wehre i bought an iTunes Car but my iPad iTunes Store is from German and the Card ist just for Austrian iTunes Stores what can i do?
iTunes gift cards are only valid in their country of issue - so Austrian cards can only be used in Austria on Austrian iTunes accounts. Do you know anybody in Austria that you could sell or give the card to ?
-
HT1688 help i need help for my iphone 3gs i can not get on my screen and it saying on itunes only
i try updating the phone and it is not working it is still on itunes screen
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
-Griff W. -
I logged in to my mid 2012 13" MacBookPro with Latest OSX Mavericks and my dock only appears if i click down on the bottom of my screen (I hide my dock so that it only comes up when I hover over where it would be) and when I do get the dock open if I hover over anything it doesnt give the name of it! After playing with this problem for a while I have concluded that wheneverer I hover over something it doesnt appear available the click on e.g. when I click on file on safari none of the options appear blue and available to click. This also makes it impossible to play video games becaues i have to hold down left click to move.
PLEASE HELP ME!!Open the Terminal in your Utilities folder. At the prompt paste the following lines separately:
killall Dock
killall Finder
Press RETURN after each line. The Dock will automatically restart itself. See if that helps.
If it doesn't help then do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.
Maybe you are looking for
-
Error/Warning while validating a mapping
I'm using OWB version 9.2 and database 9i. I have few major problems in OWB. We have stage and star schemas on the same database instance. The source system is on a different database instance. There are database links created between target instance
-
Return Delivery Goods Receipt amount takes current MAP instead of old MAP
Hi, I'm facing a problem in the following scenario: 1. Sales order is created 2. Delivery is created 3. Goods Issue for the Delivery is posted (cost of goods sold = current moving average price of material = 100 SEK) 4. Invoice is created Event: Movi
-
SAP R3 custom extract - trigger XI to map and send to Mainframe
Hello, I'm looking for the best way to occasionaly send table data (as decided by business user via custom transaction) from R3 business system to XI and eventually on to Mainframe. I'm OK with this latter portion of XI mapping, JMS / MQ config, and
-
Best duplexed Business mono laserjet, 1606dn or other?
I am looking to replace Laserjet 1320s that performed well 5 days a week for 6-8 years. I really like the specs of the 1606dn, but my bosses are concerned that this unit is not heavy duty enough for business use. Is there a business model with the
-
Photoshop cc will only load as a trial. How do I activate it?
I have been through all the suggested actions - host file certificates etc for about six weeks and still no success. what next?