Help help: USBs do not work on 848P Neo-V

I am putting together a brand new computer. Just received everything the other day. I have installed Win XP w/SP2, updated everything, and NONE of the USB ports work at all - front or back. Under the sys properties, it recognizes all of the usb hubs and everything. any suggestions on how to make iit work?

Quote from: Heath-N-PC on 27-December-05, 22:52:48
In your Device manager, right click all the USB devices and uninstall them. Then Right click the computer(sys name) icon and select "Scan for hardware Changes"
See if that helps.
If that dose not work you might check out your Bios settings, and make sure you have USB support & plug and play ENABLED
Oh and Reinstall your ChipSet Drivers.
GL
Heath
Ok....works GREAT! ...BUT ....when i restart the computer...it goes back to it being unrecognized...

Similar Messages

After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

Did you talk to your carrier?

SA30 USB do not work after reinstall, please help!!

Hi, my SA30's USB do not work at all after reintalling, I do not have the original CD with the laptop as it is a gift from my mate.... I couldnt find the driver from the website, please could anyone help me???
I could use the USB mouse but when I plug the external hard disk in, it has no responses, I tried to search for new hardware, it couldnt detect it. Any information would be appreciate, cheers.

When you instll another OS than the recovery OEM OS you have to install the drivers and tools in a right order!
This order is on the Tools & Utilities CD in a html file! When you follow these order all hardware should be detect!
Also you can go to http://eu.computers.toshiba-europe.com and download the drivers
Bye Hans

My usb port not work and hot usb port aria please help me

my usb port not work and hot usb port aria please help me

Hi
Please find the link givenbelow might help you to fix your issue.
USB Device Troubleshooting
Fix Windows 7 “USB Device Not Recognized” Error
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Help viewer does not work after update to 10.4.4

Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Help button is not working in Infoview

Hi All ,
I am working on BO XI R2 environment and help button is not working properly in my infoview.
I can get help files from Admin console but the same is not true with infoview.I got two different server installations, one of them its working fine but not for the other.
I checked for help files in IIS and they are there , even I verified web.config file as well for infoview and it also seems to be correct.
Please advice what could be the reason.
Thanks,
Vivek.

CLOSED

F4 help key does not work in ESS on ITS in Portal

Hello All,
F4 help key is not working in all iviews in ESS in Portal.When i try to press it nothing happens and no pop up appears,kindly please suggest wt might be the cause of this error? Iam tired struggling with this issue and not able to trace out reason for the same.My Email Id is [email protected] .Plz revert at earliest.
regards,
Saumya

Hi,
This kind of problem is known when webgui is being started from an IAC, e.g. HRWPC_FC_EXEC
You have to set parameter ~webgui_popups 1 in the service file of this IAC.
BR,
Disha.
Pls reward points for helpful answers.

In P6 P6 Help link is not working

Hi,
My P6 help link is not working in help menu.
P6 Library and Support link are working.
As suggested in another discussion i tried to update link in Admin>Application setting and restarted weblogic, But system is still taking some other link than i defined in application setting.
Can anybody help?

Hi,
We worked on this issue ,
Solution:
In the P6 EPPM Admin application in the corresponding configuration, In P6 Help url we have modified the url from http://hostname:8203/p6help/help to http://hostname:8203/p6help/ and we restarted the P6 server in weblogic console.
Then everything fine now,
Regards
Kumar

PLz help 7key is not working suddenli in my N-73

PLz help 7key is not working suddenli in my N-73 and the 7 is simply displaying on the screen help plz....
Birla

Ok.
It sounds as if something is keeping the key pressed, and that can be down to 2 reasons.
The phone has got wet and the internal key is corroded and fused, making a constant connection
or
Dust or dirt in under that key and are having the same affect
Either one of these reasons will need to be fixed at a Nokia Care Point as it will involve taking the phone apart.
You can find the nearest NCP to you at the Store Locator
Use the drop down list on the right to find your country.
If it is either of these faults, the NCP will probably charge you as it wont be a warranty fault, but a customer created fault.
Hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

Help front camera not working on my sons iPod touch 5g

Help front camera not working on my sons iPod touch 5g

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My Help Viewer is not working for mac help

My Help viewer is not working for mac help. Everytime i choose mac help the window opens then closes. But when i open another help like safari help it opens and works fine. If i switch it back to mac help the window just closes and the application quits.
If you know how to fix please telll!

noname212,
Using "Search Discussions" with the term "Help Viewer" you will lead you to numerous posts which refer to Troubleshooting Help Viewer by Dr. Smoke.
Good Luck
;~)

Just updated my laptop to itunes 10.5,the help feature does not work.also updated my ipad2 3g wifi 64gig to ios5, now none of my purchased apps are working?? please help?

I JUST UPDATED MY ITUNES TO ITUNES10.5 ON MY LAPTOP(WIN7)
THE HELP FEATURE DOES NOT WORK.
I ALSO UPDATED MY IPAD2 3G WIFI 64GIG TO IOS5 AND NOW NONE OF MY PURCHASED APPS WORK??????????

I have seen this before. You need to update the apps in your app store, and once they are updated, they will work again.

4530s DC CARD or USB BOOT not working even if it has this option in bios

i just posted a message but i think it's in the wrong section..
http://h30434.www3.hp.com/t5/Other-Notebook-PC-questions/sd-card-boot-and-usb-boot-not-working/m-p/9...
Hi, i just got a HP ProBook 4530s , I5 processor, Intel HD 3000 , i have a problem with it, i can't boot on any usb or sd card, i tried all linux versions i could find and also some live windows and bartPE, on my sd card i get the "Disk read error" as soon as i choose the booting device and on usb it goes a little bit further i can see the linux logo some processes starting and then same error related to write on disk, the sd card and usb are not in read only mode and on my other laptop a older one 6730s everything works...
Also all the usb and sd card work perfect in windows, when i boot from internal HDD.
Is there a fix for it?? Or can anybody that has this laptop test if it works booting from usb or sd card, maybe it's a problem with this unit..
i have tried all available bios verions and various usb devices but as i said the usb sticks all worked on my other laptop but not on this one.
Oh and also is there a bios option to stop virus check on boot? as far as i could test that is the only option in bios that is not there and i can't test with it ON/OFF.. any help would be apreciated because i can return the laptop for 30 days and i allready have it for one week. and i really need this option to work.
PS - sorry for my bad english but i'm from Europe

Quote from: Svet on 13-May-12, 00:13:31
do >>Clear CMOS Guide<< with power cord removed
Yes, I've tried this. I pulled the power cable, waited two minutes, hit the CMOS button, and also removed the battery, and waited another minute.
After which, I loaded optimized defaults, but the problem remains.
Thanks,
Ice Piq

V570 - USB Ports Not Working

Please forgive me if I posted this in the wrong section! First thread!
Recently, three out of four of my USB ports decided to stop working. The one USB port that works is a USB 2.0 port that is located between the microphone jack and the DVD drive. There is also a eSATA / USB combo port. The eSATA portion works fine, but the USB does not work. At first I suspected that the USB controller was probably starting to fail. I don't understand why all but one USB port functions properly.
I have tried reinstalling the chipset drivers, updated my BIOS, and I tried to see if the ports are recongized in Linux. None of those work. I also checked the ports to make sure there are no bent pins. My warranty period just ended so I was wondering what I can do now. I don't mind opening up the computer, as long as I know what to look for.
Thanks in advance!

hi idaggerpwn,
The USB board must be bad. Try to re-seat the cable from the USB board to the motherboard and check. If this doesn't work, check if the USB ports are somehow disconnected to the PCB. If they are, you will need to hire an a technician with board level soldering skills to reconnect them or you can contact lenovo for service to replace this part. (fees may apply)
Check page 78 (see #10) of the hardware maintenance manual (HMM) for the USB board location. To access the USB board see page 53 of the HMM.
Best regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Thanks for your information.
It will help many users that have huawei E3372 with same problem.

Help help: USBs do not work on 848P Neo-V

Similar Messages

Maybe you are looking for