Help! hideous color printing!

What happened? Photos from iphoto suddenly began printing in garish red/black/yellow. Not just one photo.....all of them. And it doesn't matter what kind of Adjust I do. It is not the printer........emails and Preview print okay. It's something wrong with iphoto.
Please tell me......what happened? And what can I do about it?

First delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
OT

Similar Messages

Help! color printing KAPUT

A couple of months ago my hp color printing started looking terrible.......dull, washed-out and grainy. It only got worse from there. Now anything printed from iphoto turns out garish high-contrast red/yellow/black......looking literally like ****! While Preview continues to print out dull, washed-out and grainy.
This week I downloaded some of my photos and took them to a print shop. They printed out beautifully there. So it is not a camera problem.
Tonight I hooked up the HP Photosmart c4400 printer I got free with this laptop a year ago. It printed nothing but magenta and black. And even that is grainy.
So I hooked my old hp printer back up. Same results from ****. However when I printed out a printer test page it was still a bit grainy, but the color is great!
This tells me it probably isn't a printer problem, but maybe OS-X or the OS-X/printer interface.
Come to think of it, I'm sure my printing problems started when I downloaded an OS-X security update a couple of months ago. A terrible mistake!
I'm an artist and I've needed color prints for my work, so this has been a real problem!
Please help!

Thank you, sig.
I just installed the hp c4400 tonight, with brand-new cartridges that came with it, so the print cartridges should be good. And I had problems with the old hp as well, with new print cartridges, so I don't think it is a printer problem. I read in another forum that someone started having color printing problems AFTER updating, so I'm not sure that's a solution.
I think there is something wrong with some setting in the hard-drive.

Help! color printing TERRIBLE

My photos look great on screen, but suddenly started printing out screaming red, black and yellow. Not just one photo, ALL photos. I tried resetting Adjust in iphoto, it makes no difference. Does anyone know what happened and what I can do about it????

Hi sugarcreek, I had the same problem. It lies with the printer itself. I know its a rubbish option but if you buy better quality ink (normally the more expensive option) then this will resolve it. Alternatively check that you printer is on the right settings. When the app bounces up, click on it and match the colour levels with the suggested ones in the printer manual.
Hope that helps.
Thanks

Color printing help with large graphics Reader 11.0.3

Good morning! We recently upgraded to 11.0.3. Windows 7 64-bit. We've had issues printing large color graphics from Reader 11.
For example, the PDF will have an intricate purple graphic with matching purple text blocks underneath. Print preview shows correctly, but when printed the graphic prints brown instead of purple. The purple text blocks print correctly. This seems to happen sporadically, but seems to be with complex graphics.
Documents from all other apps print OK and if we open this .pdf from Acrobat X Standard and export it to a .png file the colors print correctly.
The graphic files come from a myriad of sources and customers and we don't have control over the way the documents are originally saved or what apps are used to create the artwork.
Any idea why the graphics colors aren't printing and if there are settings we can adjust in Reader 11 so they will print correctly?
We've tried:
- Printing to several printers with different drivers and all yield the same results. (Toshiba eStudio 3530c with PCL6 and PS drivers, Epson Artisan 835, HP OfficeJet 8600, Samsung CLX-6200x)
- Adjusting the Overprint Preview settings under File -> Preferences and setting "Simulate Overprinting" under the Advanced button in the print preview window.
- Selecting "Print As Image" under the Advanced button in the print preview window.
- Adjusting the Document Color Options under File -> Preferences -> Accessibility.
Thanks in advance for any help!

Fastest thing you can try: use Windows Explorer to navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement.
If that doesn't work, you can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Help me wrap my brain around two-color printing.

I am doing my first layout for a two-color print job. It's a double-sided promo piece for a local non-profit.
Armed with my Pantone solid uncoated swatch book (rest assured, we are actually using uncoated paper) I am trying to piece together how to get all my ducks in a row.
The solid color blocks/text colors are pretty easy to work out - my swatch is the darkest color I can go, and I am able to lighten that Pantone color by tinting with white.
Where I'm running into issues is with my graphics. I am using two images (raster graphics) that have been converted in Photoshop to a single Pantone color. I did this by converting the image to grayscale > changing the mode to duotone > choosing "monotone" from the dropdown menu, and picking my Pantone color from the list.
Where I get confused is in reading online about other folks doing two-color printing, they are importing the grayscale image and a separate Pantone spot layer on top of it into InDesign. I don't even begin to understand this. Is it necessary?
By reading my process above, does it raise any red flags for you more knowledgeable folks out there?
Thanks so much,
Sara

Thank you - I actually was able to accomplish the task by using .psd's instead of .gif's. They were not in spot color originally, they were all over the board actually (of course!).
I am baffled by one last thing, however. I did the separations preview and took out all CMYK colors. However, when I exported the "package" the process color "black" was showing up. Yet, whenI did the separations preview and ONLY viewed black, both pages were completely blank. Luckily, I'm on good terms with the printer, so I explained this mystery to him when submitting the package of files. If he has any issues, I trust him enough to let me know what needs to be done. This printing firm does design as well, so I feel confident they will red flag any really serious things.
Thank you all again for your help! I've attached the final file in PDF, in case you'd like to see what you helped me do! The fades around the top text have some weird lines in PDF, but I assured they don't exist in the actual print file...
Sara

Ready to buy my first color printer...help!

Hello!
I'm a soon to be homeschooling mom looking for a color printer. I have no idea if I need injet or laser.
I have a black and white printer but now I need to print for curriculum for my toddlers so color is pretty important. I also want to print pretty quotes to frame for my walls and colorful day planner pages for me and family newsletters for Christmas/Holidays and scrapbook pages. Copy feature would be great but not neccessary. Reasonable priced ink refills/cartridges/whatever are a must because we'll be using it a ton--a printer that will play nice with cheaper off brand refills would be a definite bonus.
I don't need black & white because I have a printer for that already.
I also need something Mac friendly (which our last HP seriously failed at).
So what printer do I need?

I don't have a specific recommendation, but you should choose an AirPrint-capable printer from this list:
AirPrint Basics
Ink refills are never reasonably priced. Off-brand ink may cause the printer to malfunction or produce poor output.
If you don't need photo quality, consider a color laser. Much cheaper to operate and more reliable.

I am using Aperture 3 to edit RAW and JPEG photo images on my Macbook. I am having color printing issues with my Canon MP640 Pixma color printer. The image I see on my macbook is not reciprocated in printing from my printer?

My issue is that I am not getting print quality compared to the image I see on my screen. Just recently it has been very wishie washie. My printer is supposed to be excellent for producing color prints
I have contacted Canon support but they told me that the signals that are sent to the printer originate from an Apple product, therefore, it is an Apple mac problem not there's. I am wondering if my on screen proofing and/or printing profiles are correctly set. I notice that in 'print profiles' there are nine different options for printing from my particular printer. How confusing is that?
I have also found that when I choose a high standard print option my photo print comes out very red.
Can some kind person please help me? I don't seem to be getting any help from anyone else! Thanks in anticipation.

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

Need help with color management

I am looking for someone to help me. Please!
I am looking for help with Photoshop/printer not printing correct colors.
I have: Windows 7, Photoshop CS5, Photoshop Elements, HP Pavillion Laptop, new Okidata C530dn color laser printer
Previously I had a Canon Pixma MP620 and a gentleman from another forum gave me the correct settings for printing on photo paper and colors were perfect. I now have a OKIdata C530dn color laser and have started a business printing business cards and greeting cards, etc., and I do advertisements on a freelance basis.
I will be working a lot with cardstock or cover stock 65-110 lbs paper. I have an old OKIdata 2024e at work, and the colors are much better with that printer than my new personal one. I have tried matching the settings of that printer to mine to no avail. I have finally gotten the color close, but not quite. When I print on my Canon injet the colors match and print perfectly.
I have tried every setting variation that I can think of to get the color correct with my new OKIdata. I have to get the colors correct or my new business will go under because I can't match colors for my customers. I am a self taught Photoshoper and a novice so please bear with me.
Using Okidata PCL. Also have PS
Color settings in Photoshop:
North America General Purpose 2
sRGB 2.1
U.S. Web Coated Swop v2
Dot gain 20 %
Dot gain 20 %
Preserve embeded profile
Preserve embeded profile
Preserve embeded profile
engine: Adobe (ACE)
Relative Colormetric
Tried RGB color mode and CMYK color mode, no difference
Printer settings:
Photoshop manages colors
sRGB 2.1 Printer profile
Relative Colormetric
Print setup:
Letter
Multipurpose tray
Weight: printer settings-default (when I used heavy setting for cardstock it printed green instead of the color light blue, so that was a start to the right color)
Job Options:
Hight Quality
Color: No color matching
Printer preferences in Printer properties:
Color management
Device: Display 1 generic PnP monitor AMD M88og with ATI Mobility Radeon HD4200
ICC Profiles: Generic PnP Monitor (default)
Advanced:
Windows Color System Defaults:
everything under this tab is set at System Default
I have gotten the color close, but colors are dull. I have tried an adjustment layer and setting the saturation higher, but that doesn't help. I know my laptop is showing the right colors, (calibrated) because I am still printing to the Canon with cardstock and the colors are perfect using the same settings above.
Tried printing in PSE and it gave me an error that it was not a post script printer. Installed ps driver, still getting errors and it wouldn't print.
I would appreciate any help you could give me before I run out of toner and have to buy the expensive toners, or just slit my wrists j/k LOL
Thanks! JS

You need an ICC profile for your printer. Chromix has an excellent service at http://www2.chromix.com/colorvalet/ which will do this calibration for you. You download some software they provide, then print a test file on the exact same paper you are using for your cards. Then send the output to them and they will calibrate the colors with their equipment and send you the ICC profile file. Once you have it, you'll be able to print accurate colors.
There are other services out there that may cost less, but I do not know how reputable they are. Chromix is a good business I've worked with many times.
If you are trying to run a business and you don't understand color management yet, you may be in for a lot of trouble. Please get the book "Real World Color Management" available at http://www.colorremedies.com/realworldcolor/ and it will save you a ton of money and headaches.

How to configure ePrint on LaserJet CP1025nw Color Printer

Solution found:
How to Configure HP ePrint on the LaserJet CP1025nw Color Printer
System: Windows (Widows 7)
Step 1 – Install Printer
Install the CP1025nw Printer to USB, Wifi or Ethernet.
(Printer needs to print correctly in order to pass to the next steps).
Step2 – Check Firmware Version
Press the “Info-Button” on the CP1025nw LaserJet for five seconds.
The printer will print two info pages.
Look at the first Page on the top-left for Firmware Version
Firmware version must be 20120103 or higher.
Step 3 – Update Firmware
Download Firmware Update utility (LJCP1020_FWUpdate_signed.exe) from the following link:
Utilidad de actualización del firmware de HP LaserJet CP1025nw
or
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-5&cc=es&dlc=es&lc=es&...=
Execute the Utility on the computer were the CP1025nw LaserJet is correctly installed.
Find the CP1025nw Printer on the list. The selection Window might show the printer several times depending on how the printer was installed. Select one option and press the button “Update One”.
Step 4 – Retrieve the Printer Code for your CP1025nw Printer
ATTENTION:
The “Host Name” of the printer is not the “Printer-Code” you need for ePrint setup.
To retrieve the Printer-Code you must run the ePrint-Setup-Wizard-Utility.
To download of the utility, go to the link: http://www.hp.com/go/ePrint .
Find the “HP LaserJet Pro CP1020 Color Printer Series” option in the Drop-Down-List.
Click “Windows” to download the wizard (EPrintSetupWizard.exe ).
Execute the Wizard on the computer where the CP1025nw Printer is correctly installed. After running the wizard press the “Info-Button” on the CP1025nw LaserJet for five seconds. The printer will print three info pages. The third info-page offers the Printer-Code you need for ePrint setup. The code is valid for 24h only. When time elapses you have to reprint the info-pages to get an actualized Printer-Code.
Step 5 – Get Printer Email for your CP1025nw LaserJet
In order ePrint on your CP1025nw Printer you need to assign an email address to your Printer. To do this, go to the following link: http://www.hpeprintcenter.com/
Log in with your HP-ID. If you don’t have one, register for a new account.
When logged in, click on “Add new Printer”-button. You will be asked to enter the Printer-Code. (On how to get the Printer-Code, see step 4).
While evaluating the Printer-Code, be patient, the program needs its time.
When the Printer-Code is accepted, you can assign an email address for your CP102nw5 LaserJet. Done this, your con print your CP1025nw Printer just by sending the documents per email to the email-address of your printer.
Done.

Hi Max, check out the link below...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4052972
Hope this helps
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

HP Laserjet Pro 400 color printer M451dn Driver needed

I need to install an HP Laserjet Pro 400 color printer. When I plug in the USB - it provides a driver which I can open and get to the install process - The process takes me to the point of plugging in the USB and starts to install.
After 10 minutes and getting to 99% complete the install stops because it is taking to long.
I have searched for the driver on the web site but when I click on the printer name - the HP web site goes into an
Internet Explorer cannot display the webpage
Need help with installing this printer - this printer is only available to me by USB

If you are using non-HP toner cartridges, then I would say that the onus is on the supplier of these to resolve the problem.
Or to accept that these cartridges aren't quite as compatible as they've no doubt been advertised to be.

LaserJet Enterprise 500 color Printer M551 walk up usb printing

We have a few LaserJet Enterprise 500 color Printer M551 that we use with walk up usb printing.
the problem is that somtimes when a document is saved directly on the usb drive you get two files called "documentname.pdf" and "._documentname.pdf", now the hidden file is normaly a few kb in size and no problem exept it shows up as the first documents on the printer and this makes the printer spew out random characters,
is there a way to make the printer not show hidden files?
(model number: CF082A)

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet CP1215 - Color printing - Page prints yellow background

Good morning --- I don't believe I have posted to this forum before, so I hope someone can help me solve this issue.
My CP1215 color LaserJet -
printing pref set to color-
printing a document with colored icons, etc. or color photograph
Results: the "background" or what should be the white area, is yellow - bright yellow.
If I switch printing pref to B/W, I get a black/white document or photo. Of course, no color.
I have replaced the yellow toner cartridge (HP product) TWICE, the second one just this morning.
There are NO error messages.
Tried running the cleaning tool; disconnect/reconnect, etc. No luck.
I gave up trying to solve this issue 2 years ago, and have kept the pref set to black/white with no tech issues.
Now, however, I have the need to print in color, and I would really like to figure out how to correct this problem.
This printer is a monster - ~30 lbs or more, and I would rather not have to haul it to a computer shop or ship it.
If anyone out there has had this problem, please let me know how/if you were able to resolve it. Many thanks.
Susan - Threecats

Hi Threecats
I understand when you print in color you are getting a yellow background.
I have included a document for troubleshooting the all yellow background printing.
Print out a configuration page from Solution eight first. This document will provide steps for cleaning and calibrating the printer. The Print quality troubleshooting page will identify the print cartridge that is causing the issue.
Let me know the results when you compare it to the one in the document and if the background printed yellow again. Also the Print quality troubleshooting page results.
What kind of paper are you using?
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I am trying to restrict color printing on my laserjet 4700dn for my network

Here is my issue. I am trying to restrict color printing on my Laserjet 4700dn for my network. I have configured it for "color if Allowed" and all works perfectly. I was then going to allow certain users to print in color so I started by configuring my username and allow color. Every time I print it is still in black and white. I then decided to look at the color usage log and what I found would explain why. The color usage log only shows the username of one user on my network. All other jobs just show the date and number of pages. So my issue is why can my printer not see all the other users and how do I configure it to do so. Also why would only that one user show in the log. It also does not show any applications but it does for that one user. Is there something else that needs to be installed on the computers for it work?

Hi
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Laser Jet 400 Color Printer won't print from my mac but will from others on the network.

My HP laser jet 400 color printer will not print from my mac except when I send a test page. The other printers on the network are printing with no problems. Has anyone else had this problem? Help?

Hello ElizabethF,
Welcome to the HP Forums!
I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP LaserJet Pro 200 M251n Color Printer driver for Window NT

Hi All,
Good day. I'm here to seek for help.
Currently i bought a HP LaserJet Pro 200 M251n Color Printer, but i want it to use at Window NT.
I need driver to run this printer at Window NT. Anyone can help and advice me? Thanks.

Hi,
The printer is not compatible with Windows NT, it is supported on Windows XP or later operating systems.
You might be able to get print capabilities through the network by using an alternative drivers:
Download and extract the drivers for the Laserjet 5550 below, which uses the same printing language:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=406807&swItemId=lj_23425_2&swEnvOid=24
Ensure the printer is connected to the network, from the setup menu select Reports > Config Report and locate the IP address of the printer.
From the control panel add a printer, select a local printer and create a new Standard TCP/IP port by using the printer's IP address.
From the printers list select Have disk and browse to the Laserjet 5550 drivers.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Help! hideous color printing!

Similar Messages

Maybe you are looking for