HELP! How do I create a vertical scroll button for online banners?

Hi, I am creating Flash online banners and the disclaimer needs to open as a vertical scroll banner once the mouse touches the 'x close' button where the words 'Disclaimer' is stated.
How do I create a vertical scroll button including text?
I am using Flash CS6.

Hi Babaa,
sry for the lateness of my reply.
I would simply make a button that when clicked, displays a layer containing your disclaimer text. The discliamer text would be inside a Movie Clip (MC) for ease of controlling.
the MC then contains a text field which has a scrollable field. as the user scrolls through you can then display a "close" button to close out the disclaimer MC.
If you still need the work done feel free to email or PM me here and we can discuss the job further.
Regards
Russ

Similar Messages

URGENT! How do I create a vertical scroll button in Flash CS6 for online banners?

Hi, I am creating Flash online banners and the disclaimer needs to open as a vertical scroll banner once the mouse touches the 'x close' button where the words 'Disclaimer' is stated.
How do I create a vertical scroll button including text?
I am using Flash CS6.

Hi Babaa,
sry for the lateness of my reply.
I would simply make a button that when clicked, displays a layer containing your disclaimer text. The discliamer text would be inside a Movie Clip (MC) for ease of controlling.
the MC then contains a text field which has a scrollable field. as the user scrolls through you can then display a "close" button to close out the disclaimer MC.
If you still need the work done feel free to email or PM me here and we can discuss the job further.
Regards
Russ

How can i create the blue "I"-Button for the Documentation in a view

How can i create the blue "I"-Button for the documentation in a view?
I want to prepare the button with user specified Information...
and where must be create the documentation?
thanks
Edited by: DDC-TD on Apr 24, 2008 10:22 PM

you have not mentioned where do u want the " I " information button ,
1. If u want for a report , u can get the information button on selection-screen only .
if u goto se38 on the mail screen u will find a radio button for documentaion ,
when u select it and click 'create' or 'change' , an editor will open and u can document anything there ....
2. Or specify where u want info button .
thanks ,
reward points if usefull.

How can I create a vertical scroll for text in a 'div' in CSS Dreamweaver?

Hi there,
I need to flow a lot of text into a CSS div. However, I don't want a big long page as it will look ugly and be inconsistent with the other pages in the site.
I need to be able to put in a vertical scroll directly in the div containing the text (not on the whole page) so the user can scroll the text down without moving down the whole page.
Is there a way for me to do this?
I'm a beginner to CSS so a step by step for dummies approach would be most helpful.
Thanks in advance for any help!

use the overflow:scroll property:
http://www.w3schools.com/Css/pr_pos_overflow.asp

How can i create forward and back buttons for a dreamweaver slideshow?

Hi
I am an illustrator attempting to create a website in dreamweaver (basically it will be an online portfolio). I would like to have a box/slideshow with images of my work that someone can browse through by clicking 'next' and 'back' buttons. Does anyone know how to do this? I have been trying to find out how to do this for ages - i dont want to use flash if possible as i am worried about making the site too complicated. I know how to make swap image thumbnails, but i think my site would be more user friendly (and look more professional) if i could have next and back buttons. Would this involve complicated css code (which scares the life out of me!) or is there a relatively easy way to do it? I have got two 'dreamweaver for idiots' books, but neither of them cover this topic. Can anyone help?

If you are using CS4, there is a Command to create a Web Album... this does it automatically for you.
Otherwise, you can create this manually. Say you have 3 pages,
page1.html (is the index page of the album)
page2.html
page3.html
Therefore, using ordinary text links
Home would link to page1.html
Previous would link to page3.html
Next would link to page2.html
You would need to make adjustments naturally to each page as you move along with the gallery pages, changing the previous and the next links as needed. Below is a a basic example of setting up the links in a simple table structure. You would also then style the table layout as you see fit - yes, using css preferably :-)
<table>
<tr>
<td><h2>MY GALLERY OF PHOTOS</h2>
<a href="page3.html">Previous</a> | <a href="index.html">Home</a> | <a href="page2.html">Next</a>
</td>
</tr>
<tr>
<td>
<br>
<a href="../images/img_2401_jpg.jpg"><img src="../images/img_2401_jpg.jpg" border=0></a><br>
</td>
</tr>
</table>
Here's an article on creating an album using the DW Command I mentioned earlier. You could create the album and then copy and paste the code into a current page if you've already designed on.,... not too difficult, I just tested it. You do however, need to have Fireworks to process the images.
http://livedocs.adobe.com/en_US/Dreamweaver/9.0/help.html?content=WSc78c5058ca073340dcda91 10b1f693f21-7ad1.html
You could also check out the Lightbox effect which is very popular:
http://www.lokeshdhakar.com/projects/lightbox2/
Or do a google search for 'jquery'. There are different album effects using that framework as well.
Hope some of this helps :-)
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

How do I create a quick tool button for a specific preflight profile to flatten the document?

Hi all,
I'm using Acrobat XI on a Mac.
So I've done my googling and searching of the forum, and figured out how to flatten a document (I apply my signature with a stamp) using preflight. However, I'd like to create a simple, quick tool (or otherwise) button to click and flatten a document. How do I go about doing that?

I don't think you can create a button to run a Preflight Profile. But you can create a Preflight Droplet from the Preflight Options menu. This lets you drag and drop PDF files onto the droplet (essentially an alias to run the profile). You choose a Success folder and Failure folder location to direct files which pass or fail the preflight. (Read more in Acrobat Help.)

How do I create a start/stop button for each separate while loop within my program, when each of them does a different task?

I have a multimeter VI with separate while loops to accomplish the different tasks of reading voltage, current, etc. Each while loop has a stop button, but I need a button that will have to be pressed in order for the while loop to even start. I tried putting another while loop around the present one, but it still has to run once before it will stop. I want the user to have to press the button before it runs, because they interfere with each other.
I am just learning so patience and your kind assistance is greatly appreciated!
ElectroKate

iZACHdx wrote:
Hello,
I'm not entirely clear with everything you have going on and what you want your final functionality to be, but you can use sequence structures to prevent a loop from starting until the user presses a button like this:
-Zach
I have to ask, why is an NI employee using examples using sequence frames? The same thing could be accomplished using data flow by simply wiring the value of the first stop button out of teh first while loop and connecting it to the second loop. This would then use data flow to control the sequence. Why show new users bad programming methods?
As to the original question I would concur with altenbach on using an event structure.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

How do I create a vertical gradient in a table, not with an object?

How do I create a vertical gradient effect for alternating rows in a table?
I'm trying to get my table cells to alternate and look like this:
Thanks,
freecondomap

Hi, BTJT:
We are starting work on a large catalog project where we will need to change the gradient fill to -90 on every other row in the table - excluding the header, footer and first row of each table.
How would you adjust the script you mentioned above to do this? and would the script work in Indesign CS5.5 versus Indesign CS6
It does get a bit more complicated. Not super-complicated, but not as simple.
The above idiom only works for all the rows in a table. If you want to do any specific subset, then you need to use a loop.
But is it necessary that you change the gradient angle on every other row? Isn't it sufficient to set the gradient angle on all rows, and then apply the alternating gradient on alternate rows using the the alternating fills feature, as suggested by Jeffrey?
I guess you also want to apply to...all the tables in your document? That would then be:
app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().gradientFillAngle=-90;
Unless you need to be more selective? But I don't think you do?

How can I widen the vertical scroll bar width in Firefox and Thunderbird?

How can I widen the vertical scroll bar width in Firefox and Thunderbird?

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

How can i create a drop down menu for set qty in my store?

I'm wondering how i can create a drop down menu for the qty module that sits on the individual product page. My client sells in quantities of 6 packs. I currently have the minimum order at 6 but i would like to give consumers the option for 6,12,18...and so forth. I was told that it could be accomplished? Hopefully someone can help me.

Hi Chris -
Thank you for your reply! I had seen your article before, and just now again attempted to follow it, but I get stuck. There are two things that I'm confused by.
First off, toward the top, referring to the initial button, you say to add this interaction:
ON CLICK; Play Transition to comboBox: selected
ON ROLL OUT; Play Transition to comboBox normal if comboBox is in over state
ON ROLL OVER; Play Transition to comboBox over if comboBox is in normal
However, I do not see these transition options. When I select the button, the only interactions I have are to Play transistion to state, Play action sequence, Go to URL, and two for videos. So that's the first roadblock for me.
But, trying to get passed that, I went down to the portion of the article that refers to adding interaction to the dataset items. Again, I don't get it, as I see no way to add interaction to a dataset item. When I open my design-time data menu, I do see the items, and am able to rename each item, add additional rows, and change the shape of the datalist layout. However, I see no way to add an interaction to a dataset item. I must be missing a step ... Can you help with this?
Again, thank you!
Amy

I have an iCloud email address on my iMac. How can I create an icloud email address for my wife on the same computer?

I have an iCloud email address on my iMac. How can I create an icloud email address for my wife on the same computer?

If all you want is an additional email address you can create up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account.
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account, move it to another account, or reactivate it if you delete it.
More information on aliases here:
http://help.apple.com/icloud/#mm6b1a490a
If you want to keep her email separate from yours she will need to create a new Apple ID, and use it to create a new iCloud account either on a separate computer or on a separate User Account on your Mac.

HT204053 I have one apple ID that my entire family has been using. How do I create new apple ID's for each of us and move the appropriate content to each new ID from the original apple ID now that we all have our own devices?

I have been using one apple ID for 4 family members. Up until now it hasn't been a problem but now that we all have our own devices how do I create new apple ID's for each of us and them move the approprioate things from the original apple ID account to the new ones for each of us?

stuartx4 wrote:
Thanks Csound1, wish I have seperated everything from the beginning but when your kids are little and start buying music etc it just didn't seem like an issue.
That has a familiar ring to it

How can I create a new ring tone for my iPhone 4?

How can I create a new ring tone for my iPhone 4? I followed the Garage Band process and ended up with the ring tone I want as a AAC audio file. It got stored in my iTunes a a song rather than a ring tone. How do I make it a ring tone vs. a song? I tried dragging it t the Ring Tone category at the bottom of the ITunes list, but it won't alloow me to move it?

There's also an easy to use Applescript over at Doug's Applescripts for iTunes. It automates the whole thing. All you do is set the start and stop time on a file in iTuens and run the script. It will do everything else.
Make Ringable v1.1
http://dougscripts.com/475

How to i create a new itunes account for my old iphone so i can transfer data to new iphone, since my daughters new iphone is now linked to my acc and she ends up with all my apps and contacts etc

My daughter has previously had an ipod which was linked to my itunes iphone account.
she now has a new iphone and has linked this to that account and now she receives all my contacts apps etc when she syncs her account.
How do i create a new itunes account for my old iphone so that i can transfer data to my new iphone and keep the two seperate so that when she deletes all my contacts and apps and then syncs her phone again we can still be compatible.

iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

How do i create a new apple id for my sons ipod touch

how do i create a new apple id for my sons ipod touch

Apple IDs and iCloud
Frequently asked questions about Apple ID

HELP! How do I create a vertical scroll button for online banners?

Similar Messages

Maybe you are looking for