HELP!! How do I get on the internet??

I am so frustrated I'm ready to go back to my old phone. I can't seem to figure out how to get on the internet...it says to open up the settings and then turn on internet, I can't even find where to find the settings...If anyone can help I would really appreciate it. Thanks, Shellster
Solved!
Go to Solution.

Open the browser and type in a email address?
If someone helped you give them kudos. Research all info!

Similar Messages

  • HELP with Thinkpad 380XD - how do you get on the internet?

    I have an older thinkpad 380 XD which seems to be working fine.  It has been in the closet for a while but just charged it and it is working well.  I can't figure out how to get onto the internet though.  Any clues?? I have searched the boards, this website, downloaded the manual - none of these address how to connect to the internet.  THis laptop has one USB port, a bunch of pin ports, a pop out for telephone line for a fax modem, but I can't figure this out.  I am a Mac user so this is new to me.
    Can anyone help me with this?

    I would strongly suggest getting a PCMCIA LAN card and going broadband...
    More info on that fine classic ThinkPad here:
    http://www.thinkwiki.org/wiki/Category:380XD
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • How can I get on the internet with my newly purchased used G5 Power Mac if my ethernet port failed?

    We just bought our son a used G5 Power Mac, but when we got it home and tried to hook it up to the internet, no luck. We changed ethernet calbes, tried plugging directly into wall cable (by-passing router), even tried to do manual config, but no luck. I took it to the Genius Bar today and they said the ethernet plug was broken, and they did not have anything for a "vintage" machine like this.
    The Genius Bar tech told me to buy a USB Network Adaptor, however no one (Best Buy, Radio Shack, even searched the internet) seems to have them for Mac. What can I do to get this puppy connected to the internet and how much would it cost? Did we get screwed?
    Here is the seriel # + info that the seller gave us:
    Seriel # G8******QPM
    Mac OS X 10.5.8 (9L31a)
    < S/N Edited By Host >
    The Powermac G5 Dual Core 2.3 is powered by a "dual core" 2 GHz PowerPC 970MP (G5) processor with dual optimized AltiVec "Velocity Engine" vector processing units (one per core), four double-precision FPUs (two per core) and a 1 GHz frontside system bus. It 's configured with 4 GB of DDR SDRAM, a 160 GB (7200 RPM) Serial ATA hard drive, a 16X dual-layer "SuperDrive"
    Connectivity includes USB 2.0, FireWire "400" and "800", Two DVI port, optical digital audio in/out, two independent Gigabit Ethernet ports. All of the "multiple core" equipped Power Macintosh G5 models have three open PCI-Express (PCIe) expansion slots. The Power Macintosh G5 Dual Core 2ghs uses an easy-to-upgrade "anodized aluminum alloy" case with a removable side panel for easy access to internal components. Likewise, it is divided into four different thermal zones with nine computer-controlled fans for optimum cooling. 

    Sorry, the 2ndlink should be...
    http://eshop.macsales.com/item/NewerTech/MXP2802NU2C/
    Fully Mac OS X supported with with on-screen
    menu set-up and full user manual.                   
    http://eshop.macsales.com/item/Asus/USBN10/
    OS Support Mac 10.4/10.5/10.6
    I don't have those exact models, but have seen others here use them.

  • I downloaded firefox 4 and now it will only go to work offline how do I get on the internet

    I cannot get on the interet. I downloaded firefox 4 and it says it will only work offline. where do I change this

    '''rweeks''':
    One of the changes in Firefox 4: '''''by default''''' Firefox 4 does not display the "Save Tabs and Exit" warning message when closing multiple tabs, but it can be turned back on by changing some preferences.
    *<u>Saving tabs was not removed from Firefox 4</u>, but it works a bit differently.
    **By default, Firefox 4 will not ask to save tabs, but instead it will always save your tabs on exit. You can restore them next time by choosing "Restore Previous Session" from the History menu, or pressing the restore button on Firefox's default home page.
    **''<u>Note: This was a decision by the developers. On this forum, we are all '''uncompensated volunteers''' here to help other users. The developes/employees of Mozilla/Firefox rarely, if ever visit here.</u>''
    Also make sure you do not clear "Browsing History" when using Clear Recent History:
    *https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
    To display the "Save Tabs and Exit" message when closing multiple tabs, you can do the following:
    #Type '''''about:config''''' in the URL/Location/Address bar and press the Enter key
    #Accept the warning message (promise to be careful)
    #The preferences page/list will open
    #Filter = '''''browser.tabs.warnOnClose'''''
    #If its value is set to false, double-click on it (in the lower panel) to toggle its value to true
    #Repeat steps 4 and 5 for these following 3 preferences also:
    #*'''''browser.warnOnQuit'''''
    #*'''''browser.warnOnRestart'''''
    #*'''''browser.showQuitWarning'''''
    #**Note: last pref is new in Firefox 4b12, may need to add (boolean)
    #**Info/Instruction for using '''''about:config''''': http://kb.mozillazine.org/About:config
    #See:
    #*https://support.mozilla.com/en-US/questions/785169
    #*http://forums.mozillazine.org/viewtopic.php?f=23&t=2105039&p=10434467&sid=fd2a35945bb2c633687f7b50d8c53989
    #*http://blog.zpao.com/post/3174360617/about-that-quit-dialog

  • Mozilla firefox is not op0ening. there is a message "uncheck work offline ". I did this and notjing happen. How do i get in the internet?.

    what do i do to be able to log on to the internet through firefex. i am a novice to computer, so please give me step by step instructions. thank you.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • TS1559 how can i get on the internet from opening page

    I an new to Iphone and Apple.  How do I find a place to type in search etc.  Want to go to Google,  Amazon, Craigslist etc.

    Open Safari:
    and type in the search/address bar at the top

  • Help: How do I get to the current desktop?

    I've tried to dynamically load a new Shell, Look and Feel, Navigation Menu but it requires access to the current Desktop. Is there any methods I can use to get to that desktop (DesktopView, DesktopInstanceId, DesktopInstance) via the request object?
    Thanks.
    Vu

    From a JSP you should use the DesktopPresentationContext:
    DesktopPresentationContext dpc = DesktopPresentationContext.getDesktopPresentationContext(request);
    From a backing file you should use the DesktopBackingContext:
    DesktopBackingContext dbc = BackingPresentationContext(request);
    Or are you trying to do something else? There is an EJB manager that provides access to definitions, views, etc.:
    AppContext ac = AppContext.getAppContext(request);
    InitialContext ic = new InitialContext();
    DesktopDefinitionManagerHome home = (DesktopDefinitionManagerHome) PortableRemoteObject.narrow(ic.lookup("java:comp/env/ejb/DesktopDefinitionManager"), DesktopDefinitionManagerHome.class);
    DesktopDefinitionManager mgr = home.create();
    CustomizationContext cc = new CustomizationContext(request);
    DesktopDefinition[] dd = mgr.getDesktopDefinitions(cc, ac.getWebAppName());
    Or is there something else you're trying to do?
    Cheers,
    Skip

  • Can't get on the internet with my new Imac.

    My new Imac arrived yesterday. It has Tiger installed and a Leopard disk in the box. I had already downloaded my usb broadband modem's drivers for Tiger 10.4.5 from my Isp and thought it would be a simple matter to install them. No chance! They won't work. It's running Tiger 10.4.10. The modem doesn't sync up and the computer says it doesn't exist. Then I had the bright idea of upgrading to Leopard and using Boot Camp to install Windows XP. Big mistake! I've only got an ancient XP upgrade disk and you need a full SP2 one. But of course I didn't find that out untill I'd put the disk in the superdrive. So now it's stuck in there. Every time I switch the computer on it just boots into the windows setup. Pressing F3 just reboots it into Windows setup. Does anybody know how I can get that cd out of my drive? And how do I get on the internet? My usb modem and it's driver works fine on an old powerbook running Panther.

    Hello again Nevertheless,
    Probably! - Possibly! Almost certainly! Hmmm...
    Belkin equipment has caused more problems than it had solved ( in my experience only )
    Netgear equipment has solved all the problems I have, so far, encountered.
    http://www.netgear.co.uk/wirelessadslrouterdg834g.php
    It's easy. It works and I DONT work for them.
    Regards once more.
    Ian
    Message was edited by a man in a dark suit, wearing Sunglasses.

  • My Ipad2 won't turn off.  I've tried the reset method,  holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either.  Help ??

    My Ipad2 won't turn off.  I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work.  I can't get onto the internet via wi-fi either (don't have a 3G card fitted).  All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

    Look at last link.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I lost the lan ethernet connection of an older windows 7 pc to my 3 Terabyte router when adding a new local printer to the pc. How do i set this up again so the PC is recognized and can get to the internet again through the time capsule?

    I recently added a new printer to a 2005 vintage PC that is running windows 7. It used to go through a router in my wifes upstairs office to the time capsule by wired ethernet (cat5) but when I added her new local printer thought I would network it, big mistaked, lost all my ethernet connection and she cannot get to the internet. Wireless not an option. How do i set up again the ethernet connection and i will only USB the printer locally this time for the windows pc?
    Tried windows diagnostics, and besides telling me to reset everything and turn router off and on etc. I am in an endless loop.
    Other Mac products are not impacted by this issue.

    I see no direct connection.. a printer and the computer setup for internet are not related.
    But it sounds like the router in the wife's office is now in the wrong mode..
    If you have an existing main router replace the second router for a switch .. that is the easy way.
    Otherwise you need to bridge the router if it has that option.. most do not. Or use wan bypass.. where you turn off the dhcp server in the router and fix its ip to match the range of the main router.. this is the hassle of using router as a switch.
    BUT I am making a huge number of assumptions.
    What I need is the full network layout.. a quick picture would help.
    I need main modem.. main router.. (maybe same box or different).. make model and current IP address and how dhcp is setup.
    I need secondary router.. if that is what it is, IP and settings.
    I want the printer type and model. How it is connected.
    BTW I much prefer to see a network printer plugged into the network rather than usb.. it is only a matter of sorting the IP settings and driver pointing to the network rather than local.
    Or you should think of it as a broken washing machine and call the technician.. who could fix the whole lot in an hour.

  • When I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet.  How can this be and how do I fix it?

    when I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet.  How can this be and how do I fix it?

    Does the iPod connect to other networks?
    Do other device connect?
    Did the iPod connect to this network before?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I have a 4th gen iPod touch and I can not connect to the Internet even though my iPad works and my computer let's me get into the Internet. It gives me a message cannot to server. Please help I have tried to reset it but that does not work

    I have a iPod touch 4th gen. And I cannot get into the Internet I get a message that say cannot connect to server. The other computer and my iPad still work with the Internet . I have reeked to reset it but that does not work. Please help me.

    I do not know wat "reeked to reset" means.
    Try the following:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Power off and then on your router.
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • I am running Firefox 3.5.4. When I try to upgrade to a newer version I get "Firefox is configured to use a proxy server that is refusing connections." Then, I have to re-install 3.5.4 to get to the internet. I have Windows XP. How do I fix this?

    Any version of Firefox above 3.5.4 I try to install will not let me get to the internet. Each Firefox gets upgraded it keeps giving me the error message that "Firefox is configured to use a proxy server that is refusing connections." Then I need to re-install 3.5.4 to get to the internet. This is driving me nuts! How do I fix this?

    You're welcome

  • How do I get to the screen in Mail that allows you to delete multiple "Previous Recipients"  from the list? I have seen it but cannot find it again. Help.

    How do I get to the screen in Mail that allows you to delete multiple "Previous Recipients"  from the list? I have seen this screen but cannot find it again. It shows all of the "Previous Recipients" in a long list. You can edit the list by selecting multiple names or all names with the command key and delete. Help.

    Launch the Mail app on your Mac and go to Window>Previous Recipients.

  • Help me please! I can't get on the internet with my new phone

    Can someone please help me. I purchased my Blackberry Pearl from an on-line seller and it was suposed to be new. The problem comes when I try to set up my e-mail account....I go to my e-mail set-up option and the only one that it gives me is " I want to use a work e-mail account with a Blackberry Enterprise Server" . Obviously I do not want to do this but I have no other options. I can either hit close or next and next ask me for a password from my Enterprise Server administrator. I contacted Verizon and after much run around they finally told me that this phone was connected to another Blackberry account. I don't know if they really knew what they were talking about or if they just did not want to really help me because I did not upgrade my account and buy my phone from them.  It sounds to me like they are trying to say the phone is stolen since they are saying that it is connected with another Blackberry account but if that were the case then Verizon would no be able to activate the phone and I can get it activated and make and receive calls but I cannot get on the internet with it. What good is a smart phone if you can't do everything it is supposed to do?

    Hello,
    Actually, what they told you is accurate. BIS accounts are what enable additional services (including Personal email). BIS accounts are all managed by the carriers. One BB, as defined by it's unique PIN, can have only one BIS account on one carrier in the world. If a BIS account exists somewhere else for a specific BB, then a carrier cannot create another account for it. That is the way it works. One of the reasons is of course to prevent the use of stolen items. That's not the only reason, but it's all irrelevant...if a BIS account exists somewhere for that BB, VZW cannot create one for it.
    What you need to do is to contact the seller and hope they are reputable. They need to contact their carrier and have that BIS account shut down. Only then might VZW be able to create a BIS account for you.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • I ordered a case for my iPad mini retina display and I doesn't fit

    I ordered a case I really liked and it doesn't fit? Why is that and where app an I get a new one?

  • Need help for importing oracle 10G dump into 9i database

    hi, Someone help me to import oracle 10G dump into 9i database. I'm studying oracle . Im using oracle 10G developer suite(downloaded from oracle) and oracle 9i database. I saw some threads tat we can't import the higher version dumps into lower versi

  • Oracle user?

    Hi, New to oracle, and to the forum. A product I'm installing (Visionael Network Audit) requires Oracle to be installed beforehand. I've successfully installed Oracle. Firstly, I do not have any user other than the administrator on the Windows Server

  • Latest patch cluster idated march 14 nstalled on solaris10

    I installed the latest patch cluster on my solaris10 system and afterwards the Solaris Management console would not work. I kept getting the error that the server was not running. I followed the limited trouble-shooting guidelines for stopping and st

  • USE 2 identical creative cards (XFI-Ti, ZS2, ...)

    Hi everyone, I?m currently testing Windows 7, news drivers of creative works fine and Microsoft allows to play the same sound on multiple cards/channels; different sounds on different channels witch is really nice. My problem is, and was also the cas