Help- How do I Make a High Resolution Gif in Flash?

So I've been surfing the net trying to find a way to get a 100% resolution from Flash to Gif and can't find it.
Here is the deal, I've got CS5 Premium Suit and I started doing animation in photoshop. It took forever but once I got it done it looked awesome and I could easily transfer it into a gif via 'save for web and devices".
Because it was taking forever I decided to learn flash and after a day I got the basics pretty much figured out and made my first .swf file. I then went to turn it into a Gif and the resolution sucked and the timing was off. I found out that you can clean it up a bit through Publish settings which helped a lot but still any gradients are off.
Is there a way to get a high resolution gif out of Flash to look as good as my photoshop animation gif?
Thanks in advance.
Done in Flash (Click to see)              Done in Photoshop (Click to see)
Micah

Hello? I posted this in the annimated tips sup-forum but I was told to ask it here. What is the deal with this. Is there even a way I can manualy adjust the compression of these files besides "losy" or "losless" because it sure it losing stuff in losless?
Is photoshop really the program I have to do my animation in if I want to maintain clearity in my graphics?
What the crap! Why would Adobe do this, Why is it compressing my files in such a way that is distorting the gradients and colors?
Anyone?

Similar Messages

  • Whenever i burn photos to a cd from iphoto it does it in a low resolution - how do i make it high resolution?

    I need to print photos in a high quality resolution - my camera resolution can enlarge up to 16X20 in good quality but when i burn from iphoto to cd it burns in low res....how do I fix that? I don't see an option anywhere to indicate resolution...

    As you don't tell us what version of iPhoto you have or how you're burning to disk, I'll guess you're using the Share -> Burn command to make the CD?
    This makes a mini-library on the disk and is designed for sharing with other iPhoto users.
    If you are doing this then I'll also guess that you're printing the Thumbnails from the Data folder.
    Try using the File -> Export command to export the photos from the Library to a folder on the desktop. Then burn that with the Finder.
    If I've guessed wrong post back

  • HT1727 help how do i make a purchased song my ring tone, it;s not showing on my list for ringtones

    help how do i make a purchased song my ring tone, it's not showing on my list for ringtones

    This song was purchased from the iTunes Store?
    If so, you can't create a ringtone from music that was purchased from the iTunes store, but if there is a ringtone available for purchase and download at the iTunes Store with this song, you need to do that.
    For music in your iTunes library on your computer that was not purchased from the iTunes store, there are a number of ways to create a ringtone with such music. With a Mac, there is an inexpensive or free app avaiable via Apple's online App Store named Ringer. Ringer has access to all music and sound files in your iTunes library that was not downloaded from the iTunes Store for creating your chosen segment of the song to be used for the ringtone. The app places the created ringtone in your iTunes library under Tones for transfer to your iPhone when syncing.
    Creating ringtones on a Mac can also be done with GarageBand, and there is a manual way of doing this with iTunes.

  • I have unchecked the box that converts my higher resolution songs to 128 kpbs downloaded to my iPod classic. How do I restore the higher resolution songs to the iPod?

    I have unchecked the box that converts my higher resolution songs to 128 kpbs downloaded to my iPod classic. How do I restore the higher resolution songs to the iPod?

    Uncheck the option to sync music to your iPod from under the iPod's Music configuration pane and hit Apply.  After it has completed, retick the option and again hit Apply to resync all your music from your main iTunes library back to your iPod.
    Or restore your iPod and start from scratch.
    B-rock

  • How to make a high resolution screen capture?

    Hye,
    I'm trying to make high resolution screen captures in Maverics.
    On earlier systems, one could use Quartz Debug which had a slider that could alter resolution of the capture app.
    Now on Mavericks this option is gone, it only allows Retina-like screen resolution for non-retina macs, but on my 27" imac, images look really blurry...
    So any way to get the job done?

    Hye,
    I'm trying to make high resolution screen captures in Maverics.
    On earlier systems, one could use Quartz Debug which had a slider that could alter resolution of the capture app.
    Now on Mavericks this option is gone, it only allows Retina-like screen resolution for non-retina macs, but on my 27" imac, images look really blurry...
    So any way to get the job done?

  • How do i set Preset "High Resolution" in save as EPS script

    Hi,
    I am writing my own Illustrator scripts to automate the workflow.
    I haven't been able to fix a Preset "High Resolution" in the transparency section of the EPS-option dialog.
    Is there a way to set that option by script?
    It would be great if anyone help an idea of how to solve it.
    MOhan

    Thanks.
    My issue is as per my workflow need to supply PDF to clients.
    Same is converted from Adobe Illustrator>Concert to EPS>Distill and PDF is ready.
    While converting through Script process some of the text's converting in pixels.
    Same if converted without script it comes in good quality.
    Please advise.

  • How Can I Make a High Quality HD DVD Video (dvd vob)

    i work a hd project and after we will make a dvd video. if i export a mov and convert it with toast titanium the quality is bad. if i make it dvd studio pro hd dvd mac and pc is open but dvd player does not play it. and the other version dvd studio pro convert from 16/9 to 4/3. but i don't like it. the other one i send to compressor and chose the dvd/hd dvd:mpeg-2 30 minutes it exports mv2 not vob(audio ts video ts)
    so i want to make a high quality hd dvd video how can i do that?
    thanks
    Message was edited by: rec_off
    Message was edited by: rec_off

    I don't know about NTSC but there is a nice PAL solution for SD 16:9 for ordinary DVDs. The 16:9 image becomes 720x576 pixels. So the pixels are each quite wide, and the horizontal resolution is less than the vertical resolution, but at least no pixels are wasted as with letterbox.
    A semi-solution is to make a HD-DVD. That format has been abandoned but Apple software pretends otherwise. Apple Compressor does compressions at around 20 Megabits/second data rate specifically for HD-DVD, and Apple DVD Studio Pro makes HD-DVDs. For short projects, less than around 30 minutes, the HD-DVD can be made on a normal DVD. (I did this for a 40 minute project by cutting the bitrate somewhat.) The quality is almost equal to Blu-Ray, but who can play it? People with well equipped Apples can.

  • How do I burn a high resolution dvd from Final Cut

    Compressors quality doesn't seem as good as the file that plays on my computer.  Please tell me there is a way to get the high resolution I see on my computer onto a DVD.  And how do I do it?  Step bye step...

    Hi
    But if You want to do as good as is possibly with iDVD then read my notes.
    FCE/P to iDVD
    Several things
    • How to go from FCE/P to iDVD
    • Free space on Start-up hard disk
    • Encoding
    • Brand and type of DVDs used
    • Burn speed set
    • iDVD BUG
    • Chapters
    How to go from FCE/P to iDVD I do
    • Disable Screen and Energy saver
    • IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
    • Export out as a QuickTime .mov file
    • Select with Mark - Chapter Mark
    • Not as Self-Contained (not important but saves time and space)
    • NO QUICKTIME CONVERSION (IMPORTANT)
    This QT.mov file I import into iDVD from within iDVD.
    Free space on Start-up hard disk
    I set a minimum of 25GB (for Mac OS and iDVDs temp files)
    Encoding
    • I use Pro Quality encoding
    Brand and type of DVDs used
    • I use Verbatim
    • I use DVD-R
    Burn speed set
    • I set down this to x4 (or x1)
    iDVD BUG
    • One can not go back to movie-project for any alterations and then go back to
    the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
    of them will work.
    Medicine - Start a brand new iDVD project.
    Use of Chapters
    • I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
    • NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
    • No Chapter marks in or within two seconds from a transition
    (Way around this last one - Export movie as QT full quality and NO Chapter marks
    Import this into a new Movie-project and now You are free to set C-Ms where You want
    them except at very beginning - still)
    Material used to build movie
    • video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
    • audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
    • photos - I use .jpg - no .bmp etc
    Trash iDVD pref. file and run Repair Permissions - and have a re-try.
    from post ??
    May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
    Yours Bengt W

  • How to change pictures to high resolution

    What app do I use to change my pictures to high resolution?

    Hello
    I have found info that Tecra 8200 is delivered with two different displays:
    1024x768 pixel TFT colour display and
    1400x1050 pixel TFT colour display.
    I presume you have the second one. If you use lower resolution you can not expect perfect illustration and please use native resolution. Please use right driver and you can find it on Toshiba support page.
    Robin is right. Before you install Power saver utility install Common modules at first. Using power saver settings you will be able to set display brightness at the maximum level.

  • Help- how do I make images ready for web gallery??

    Hi,
    I am trying to create a photo gallery of images within Bridge using the Adobe Web Gallery feature. I have the images I want to use in a folder.What steps do I need to take to get the images saved in the correct format and file size? Also, what files sizes do you recommend for a web gallery? I need to make medium to large thumbnails & large images (when clicked). Here's what I am thinking I need in terms of getting this right:
    use Adobe Photoshop/Bridge to create the gallery
    jpg for photos
    gif for solid colors
    file size under 2MB (full image), under 20-30K for (thumbnails), total size of all images under 50K (no more than 50 sec. to download)
    screen size: 984x728
    screen resolution: 72dpi
    If you could help me in any way, shape or form concerning making my images ready for a web gallery that would be most helpful. And if you can refer me to any resources on making a web gallery that'd be awesome. Thank you!
    ashmic19

    Thanks for the link Curt Y that video is really helpful. After looking through some materials I had I figured out how to optimize my images. So I don't need any help anymore. But thanks to all who viewed this and thanks Curt Y for the video!
    ashmic19

  • How will Reflow work with higher resolution mobile devices?

    If the media queries are based on a resolution breakpoint, how will we be able to specify a mobile css design for new mobile devices with such high pixel density displays?

    I haven't found a workaround for device pixel ratio but I have found that creating my sprite at double res and oversizing my images helps greatly with sharpness on hi-dpi displays. Reflow does allow for CSS3 background sizing which is great for resizing a single  sprited item across breakpoints.
    SVG would be even better but OSX Mavericks has made illustrator unusable for the time being, so I'm using raster-only sprites.

  • HELP: how can we make BPEL PM more developer friendly

    Hi All,
    With the new year starting, one of our resolutions for 2005 is to enhance the developer experience for BPEL PM and we are looking for suggestions and help in prioritizing them. Given that some of you guys have kicked the tires, you are the best source for those suggestions. I hope that you guys will be vocal.
    We are interested in the end to end experience: OTN, Download, 1 st hour, documentation, product development, console, this forum, anything else that is part of the overall experience.
    If you do not like to post, please just send me an email.
    Thank you!
    Edwin
    VP Product Development
    Oracle BPEL Process Manager
    [email protected]

    Edwin,
    I might have several suggestions as I'm sinking my teeth into the PM Server and Designer. We're considering to use the BPEL technology in the BIG way.
    First of all, make it a bug-free (as much as possible). Let me describe to you what I believe is a bug or a flaky design. In the Designer, File>New>Oracle BPEL Project creates a new project with a file bpel.xml. For example, look at your CreditFlow sample. In that file there is <partnerLinkBinding name="..." <property name=wsdlLocation"> http://<host name of the WSDL host server>/....
    when the partner WSDL is hosted on the localhost that <host name> in the line above is the name of my machine instead of 'localhost'. Then, <project name>.bpel validation crashes when you're in the off-line (disconnected) mode or connected via VPN gateway (since obviously you think you don't need a proxy because everything is local). But, even if it works inside the LAN I think it's a bad design; since it's generated automatically by Designer the developer doesn't have a clue what's wrog when he/she needs to debug your code. The Designer should stick there 'localhost' instead of the the name of my computer on the network.
    Here how I spotted it. I generated you CreditFlow sample in the Quick Start Tutorial. I went by the book, Compiled the CreditFlow.bpel and it crashed! The book did not say it was supposed to crash. The book said everything should be honky dory. The Validator printed a message: "connection timeout...." Since I'm new to the BPEL it took me awhile to figure out and once I stick 'localhost' in the right place in bpel.xml everything worked. Again, I was running everything on localhost.
    So, I think it's a bug at worst or a flaky design at second. What am I missing here?
    The problem is that if my company wants to convert the Biz Analysts into BPEL modelers how could a BA figure out the solution to the problem like this? He/She would just give up and tell the Technologists (us) that this is a bad product.
    Thanks,
    Greg
    P.S. What happened to Doron Sherman (CTO) and the old Collaxa folks? He is not listed in the ORCL directory. For those who don't know BPEL Server and Designer were developed by Collaxa and ORCL bought that company last year.

  • Plz help, how do i make .sis work on my phone

    hey everyone i would be very grateful if you can help me on how to make .sis files work on my phone[k750i], i tried to convert it into a jar nd then put in on my phone but it still didnt work.im kinda new and i dont know how to make .sis files work on my k750i.HELP! plz........

    .sis is a symbian program, not a java file of any sorts. You can't get it to work on k750i or any sony ericsson phone.
    This is a forum for java developers, not for you.

  • PLEASE HELP how do you make gravity around two or more points that effects a ball or so on

    hi
    i have been trying for hours to make a ball that if effected by two points of gravity a bit like http://activeden.net/item/gravity-simulator/15437 this but i can not code it and i can not find any tutorials that show you how to do it.
    hope some one can help
    thanks

    So here's some more info, Not only have i never used a mac before, I don't really know how to use one, and my girlfriend is at school pretty far away right now, shes not good with computers either. So i don't wanna have to resort to asking her to install jmf on her macbook. If i do have to do that i guess i could get her friend to help her out.
    But i'd still rather get this problem fixed. How do i incorperate jmf with my program, so it runs on all computers. I checked the native folder in SipCommunicator 1 release 2 and 3, but its only one dll file called ShellLink.dll
    I checked everywhere in both of the downloads and i couldn't find any other dlls.
    I must be downloading the wrong thing....
    I downloaded
    SIP Communicator 1.0-alpha2 release: Generic installer for all OSs
    and also
    SIP Communicator 1.0-alpha3 nightly builds: Generic installer for all OSs, Java installation required
    The reason i got the generic installer is because I have a vista, and i want to run this on a mac. I don't have or know any one living near me with a mac, so i need to be able to build it on my comp.

  • How do I get a higher resolution on external displays using a HP Split 13-f010dx x2?

    I just bought a HP Split 13-f010dx x2. I tried connecting my 27 inch Dell U2711, which has a max resolution of 2,560x1,440. I tried using just HDMI to HDMI, but that only allowed me to go up to 1920x1080, so I tried using a DVI-D adapter, and that only allows 1680 x 1050. Is there any way to get 2560x1440?

    Hi hundredsofstuff, and welcome to the HP Support Forums!
    I understand that you have a problem getting your Dell monitor to the correct resolution when connected to the HP Split 13-f010dx x2 PC.  I will try my best to help you with this issue.
    Here is a document for Connecting a Monitor, Projector or TV (Windows 8), that explains the different connections and settings for an additional monitor.
    I hope this information helps, please let me know how it goes.
    Thank you and have a nice day!
    I worked on behalf of HP.

Maybe you are looking for