HELP: How do you make a hard drive password on my T61?

I want to encrypt my hard drive with a password. Can someone give me a source on how to do it or step by step instructions. I have a Lenovo T61.

You can with the chmod and chown Terminal commands. For the former, see http://www.dzinemaster.com/chmod.html. The rest is left as an exercise.

Similar Messages

How do you make a hard drive so that it is only read only for everyone except myself?

I have a hard drive connected to my AirPort Extreme and I would like to make sure that other people on the network don't mess with my media.

You can with the chmod and chown Terminal commands. For the former, see http://www.dzinemaster.com/chmod.html. The rest is left as an exercise.

How do you know a hard drive is bad?

how do you know a hard drive is bad?

From the OS X "Help" system:
Check whether a disk is about to fail
You can check the health of many disks in Disk Utility. Many disks include Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T) hardware, which lets a disk test itself for potential problems.
Open Disk Utility.
Select the disk in the list at the left.
If you see a message saying the disk has a fatal hardware error, the disk has an irreparable hardware problem that can’t be fixed by Disk Utility or any other utility that repairs software problems. Back up as much of the data on the disk as possible, and then replace the disk.
If you don’t see a message saying the disk has a hardware error but you still have problems with the disk, you can try to repair it with Disk Utility.

How do you put your hard drive from an old computer to your new mac?

how do you put your hard drive from an old computer to your new mac?
i want to get the pictures, etc off of my old mac onto my new mac desktop. how can i do this?

You don't.
How to use Migration Assistant:
http://support.apple.com/kb/HT4889?viewlocale=en_US
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963
Troubleshooting Firewire target disk mode:
http://support.apple.com/kb/HT1661

How do you rename external hard drives?

Hi, can someone please tell me how to name an external hard drive? many thanks

Please refer to:
https://discussions.apple.com/thread/3951253?start=0&tstart=0
your answer is in that thread.

How do I make a hard drive "forget" that it was once a (no longer used) Time Machine drive?

I'm starting a new thread on this question in the hope that someone new will notice it.
I've started using a larger hard drive for my TM backups. I want to be able to use the previous drive for other things BUT I also want to keep the oldest TM backup, just in case. In order to do that I want to move all but one day's backup to the trash but of course get the "The operation can’t be completed because backup items can’t be modified." message. I also, of course, can't change the name of the backups.backupdb folder for the same reason. In older OSs it was possible to use a Terminal command to bypass all this but it would seem that it's no longer possible to do this in Mt. Lion.
Note that the old drive is NOT being used in Time Machine, so that's not the problem.
Does anyone know how to make Time Machine realize that the drive is now just a drive, not a Time Machine drive? Obviously I know I can just reformat it but then I'll lose ALL the files. I want to keep one day's worth, so reformatting is not the solution. I do know that I can copy everything over to another drive but I don't have another drive large enough to do that, so need to unflag the one set of files as TM backups and trash the others.
Any help gratefully accepted.

I think I understand your question, but I'm puzzled at what you are trying to accomplish.
Let's say you've been using TM for a year, now you start a new backup set on a different device.
What you seem to want to do is delete all the backups in the old backup set on the old except for the very first backup - ie. the oldest.
That would mean that you would retain the oldest backup from 1 year ago, and all the new backups from the start of the new set forward. Deleting all the past year's backups except for the very first plus the new backups going forward on the new device. Is that what you want?
The only way I know of doing this would be to manually delete in TM all the undesired backups -slow and tedious for sure,
On the other hand, you want to keep the last backup of on the old device then....
Assuming that you started the new back up set shortly after the last backup on the old device, then the first backup on the new and the last on the old are almost identical for all practical purposes.
If that's what you want I'm not sure it accomplishes anything useful.
Can you clarify what you want to achieve/do, so we can help you better.

How do you replace a hard drive on a xserve raid

I am running an old xserve (10.3.9) I need to replace one hard drive in my raid set. I have a new hard drive exactly the same as the one I am replacing. Do I have to do anything in raid admin (version 1.2) or once I insert the new hard drive will it just start working and the other drives will start talking and writing data to it? Thanks for any help!

Hi
Slightly confused about what it is you actually have?
Do you mean an XServe like this one here:
http://www.google.co.uk/imgres?q=XServe&num=10&hl=en&tbo=d&biw=1433&bih=856&tbm= isch&tbnid=VXlw7-KP6nEsaM:&imgrefurl=http://inertz.org/2008/01/xserve-an-impress ive-multitude-of-potential-used-server/&docid=HT9gRAJQrNrS8M&imgurl=http://inert z.org/wp-content/uploads/2008/01/xserveg5.jpg&w=600&h=361&ei=9YPQUI6dLeX-4QTwloC 4Dw&zoom=1&iact=rc&dur=639&sig=102214044775849835144&page=1&tbnh=144&tbnw=242&st art=0&ndsp=35&ved=1t:429,r:3,s:0,i:124&tx=152&ty=81
You can't/don't use RAID Admin on an XServe.
Or do you mean an XServe RAID like this one here:
http://www.google.co.uk/imgres?q=XServe&num=10&hl=en&tbo=d&biw=1433&bih=856&tbm= isch&tbnid=-wl73CtlayTBlM:&imgrefurl=http://en.wikipedia.org/wiki/File:Xserve_RA ID.jpg&docid=9pxrypAvxoLK-M&imgurl=http://upload.wikimedia.org/wikipedia/commons /0/06/Xserve_RAID.jpg&w=1296&h=416&ei=9YPQUI6dLeX-4QTwloC4Dw&zoom=1&iact=hc&vpx= 709&vpy=345&dur=119&hovh=127&hovw=397&tx=170&ty=57&sig=102214044775849835144&pag e=1&tbnh=81&tbnw=252&start=0&ndsp=35&ved=1t:429,r:11,s:0,i:148
If it's the above simply remove the drive module and assuming you have a replacement drive module and drive, insert the new drive module. If you only have the drive, release the plastic moulding at the foot of the removed drive module, release the screws, remove the drive and reverse the process to install the new drive. Insert the module and the rebuild should happen immediately and you can use it normally while all this is happening. Depending on how much data you have stored on the unit, performance loss should be minimal. I would monitor the progress using RAID Admin.
As ever try and make sure you have a full and effective back-up handy just in case.
If it's an XServe you're going to have to provide more information as what you do will depend a little on how the RAID set was created.
HTH?
Tony

HT1820 how do you restore the hard drive with install cd after zeroing out all files? when i try to boot install disk or from usb a kernel panic screen appears telling me to restart my computer.

everytime i try to boot installation a message appears saying 'you need to restart your computer. holddown the power button until power is off then press down power button again'. i read that it was a kernel panic. cant boot into any modes but recovery mode with disk utilities but my wireless internet says no wifi hardware installed and sometimes startup manager. this just started after i erased the hard drive and had it overwritten with zeros. its a macbook pro 7,1. bought it in 2011, i think it was made in 2009. it has 320 gb of empty space right now and nothing ive tried seems to work. please help!!!! there is also no os x installed right now due to me zeroing out the hard drive how do i repair it so it will boot to installation?? i can also enter single user mode but do not have root access?

You are getting a kernel panic because you are trying to boot the computer with a Tiger DVD. That model requires 10.6.3 - Snow Leopard. You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

URGENT HELP: How to reformat an external hard drive?!

We purchased a Desk Hammer external hard drive with USB. My hubby plugged it into his Mac G4/OS 8.6 and when it was recognized, he selected to format it for Mac only. We needed it to be ISO Whatever so I can use it on my Windows systems too. The Desk Hammer people are no help with how to get access to this thing and reformat it (in fact, WARNING they say they do not even support Mac usage for these drives!). What can I do to reformat it to work on the Windows side? thanks for any help....
Mac G4 Mac OS 8.6 or Earlier Mac OS is 8.6

Windows machines support Windows formats some of the time.
The Mac formats and supports many common formats, and is nice about it.
You use the exact same utility you used to format it for the Mac, only you select MS-DOS as the type. If the drive is of a modest size, that is all you need to do.
The Mac will also happily read and write files on it, even though it is an MS-DOS drive. It may not properly show their Icons (everything may be generic MS-DOS documents) until the files are copied to a Mac drive.
A very large drive will need a third-party utility to format all the space on it into Windows format.
ISO-whatever and High Sierra and a few others are CD-only formats, you will not be able to format a Hard drive to that format.

How do you defragment a hard drive

HOw do you defragment hard drives in a macpro running mountain lion.

You don't need to. But if you feel you must:
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive.
Get an empty external hard drive and clone your internal drive to the external one.
Boot from the external hard drive.
Erase the internal hard drive.
Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the downward pointing arrow button.
After startup do the following:
Erase internal hard drive
Open Disk Utility in your Utilities folder.
After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed. Do not quit Disk Utility.
Restore the clone to the internal hard drive
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.

How do you defrag a hard drive

I am wondering how the best way is to defragment my second internal hard drive. I am trying to set up a partition for boot camp, but it isnt partioning. I am wondering if it is because it needs to be defragged.
Please let me know how to solve this.
Thanks

Caleb,
It is more likely that the drive is not using the correct partition mapping than it is that fragmentation is causing the problem.
The easiest way to "defrag" a drive, in this particular case, would be to simply copy whatever data is on it now to another volume, delete it from the original (or erase the original volume), then copy it back. This process copies whatever data you are handling sequentially in both directions, thereby eliminating all fragmentation. The other methods given so far in this thread will all work, but seem a bit overkill in your situation.
But as I stated, it is more likely that the drive in question isn't using the proper partition mapping. Select the drive in Disk Utility (the drive, not a named volume), then look at the bottom of the window to determine what partition map is being used ("APM," "MBR," or "GUID"). Only drives that are using the "GUID" partition map will support Bootcamp.
You can change the partition map by partitioning the drive and choosing the GUID scheme from the "Options..." dialogue sheet. In order to use Bootcamp to install Windows, the drive must contain only a single HFS+ partition.
I'll repeat those important points above: In order to use Bootcamp to install Windows, the drive in question must be partitioned with a single HFS+ volume, and it must also be using the GUID partition map.
Scott

How do you eject a hard drive?

How do you eject an external hard drive?

By selecting the drive and pressing Command+E.
Any of these methods will work.

How do you change out hard drives without losing all your software license keys

I have lots of cash tied up in software.

To transfer your current hard drive I like the free application SuperDuper. It makes a bootable copy of everything on your hard drive http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html You'll need a cheap SATA external hard drive case. Put the new drive in the case then format and partition the new drive and clone your old drive to the new one. Check that it's set up right by booting up from the external drive. Then replace your old hard drive with the new one and put your old one in the external case.
Here's a cheap SATA external hard drive case on Amazon http://www.amazon.com/Vantec-NexStar-2-5-Inch-External-Enclosure/dp/B002JQNXZC/r ef=pd_cp_pc_0

How do you open a hard drive in Lion

I have a Mac Book Pro. Since the Lion upgrade I can no longer open a hard drive window on the desktop. When I double click on the HD icon nothing happens, or at least that is what it seems. However when I do the 3 finger swipe to go from one desktop to another, then I see that opened HD window showing up and I am transissioning from one desktop to another, then when then next desktop is active, the HD open window disappears. This is a major bug because I can not access a file on the internal or any connected HD on the MB pro. Anyone else have this issue? I do not have the issue on an older 27" iMac, but of course I do not have a trackpad on that machine. So I feel this is a "Swipe to next desktop" issue. How do you shut the 3 finger swipe off?

Sounds like you have a Finder window lost in the "Space between Spaces"
sometimes dialog windows do this to me, its annoying as all get out.
Two finger click on your Finder icon and go to Options and pin your Finder to "This Desktop"
That should force the open window of finder into the space you need, then you can close it and undo that setting.
Or you can pin finder to all desktops and it will be persistant to any space you are in, but that can get annoying.
EE

How Do I Make My Hard Drive Into An External Hard Drive

I've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?
Thanks!

You can get adapters that go from FW400 to FW 800 and you can get an enclosure from macsales.com, you can also use a bare doch, Google for them.

HELP: How do you make a hard drive password on my T61?

Similar Messages

Maybe you are looking for