Help!! how to connect macbook to a phillips flatscreen

hi i have bought 2 cables, (excuse my english but i am from the netherlands..)
1 mini-dvi to dvi (apple)
2 belkin digital video single link cable
if i plug in both cables nothing happens... computer works fine, but get nothing on the flatscreen, other than blue channel... i have tried almost every channel...
anybody some ideas for me??
thanks!!

I use my MacBook with my Philips 32" Flatscreen. (32PF9641D)
I use the following:-
mini-dvi to dvi (apple)
dvi to hdmi convertor
hdmi cable
HDMI cable goes into HDMI 1 and I just select it from the remote using AV.
I sometimes get the "blue screen", it is normally when the mini-dvi cable hasn't been inserted correctly. Pull it out and reinsert and it normally works.

Similar Messages

  • How to connect macbook pro to panasonic tv with hdmi cable

    How to connect macbook pro to panasonic hd tv with hdmi cable

    Hi m,
    It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
    This is if your MBP is from April 2010 or newer:
    http://support.apple.com/kb/HT4241
    First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
    Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
    If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

  • How to connect macbook pro to tv

    How do I connect my macbook pro (2 -3 years old) to a tv?  Bought an apple HDMI connecter, bought cable to connect to it and to tv, connected them but nothing happens.

    how to connect macbook pro to tv

  • How to connect MacBook Air OS 10.8.2 to wireless HP Officejet all in one 4630 e printer

    How to connect MacBook Air OS 10.8.2 to wireless HP Officejet all in one 4630 e printer

    Greetings loschach,
    Welcome to the Apple Support Communities!
    I understand that you would like to set up wireless printing with your Mac running Mountain Lion. To complete this task, please read over and work through the instructions located in the attached article. 
    OS X Mountain Lion: Set up a printer to print wirelessly
    Cheers,
    Joe

  • How to connect Macbook to TV but have reverse picture?

    I'm not sure how clear my subject is, but basically here's what I want to do. I know how to connect my macbook to the TV and have my macbook screen show up on my TV screen. I want to reverse that, I want what's on my TV to show up on my mac screen so I can stream the picture on the web. Is this possible to do? What supplies am I looking at getting to be able to do this? I want to be able to broadcast what's on my TV through my mac, but I would also like to be able to work on my mac at the same time. I might be dreaming now right?

    I am having a problem with getting my tv to work as the monitor. i have the mini dvi port connected to a RGB input port in the back of my LG tv. Any help you could give me would be appreciated

  • How to connect macbook pro with hdmi? any ideas?

    hi,
    as the new macbook, doesn't have a dvi port but a faste thunderbols my good old dvi2hdmi cable is useless.
    any ideas, how to connect the new macbook to my hdmi tv?
    thx for help!

    Retina has a HDMI port.
    Others have a ThunderBolt, which is backward-compatible with Mini DisplayPort. Get a Mini DisplayPort to HDMI adapter, and make sure you insert it until essentially ALL of the metal end is inside the jack, and you will be in business.

  • How to connect Macbook to TV through Dvi to VGA adapter.

    I recently got s Macbook and was wondering how to connect it to my 32 inch sony tv. I have the dvi to vga adapter and recently bought an adapter that converts the VGA into RGA adapters + S video (all of which my tv has) When I connect the TV with these components nothing happens. I am curious to know what the next steps are to getting the Macbook to recognize the tv and how to produce an image on my TV. Any input would be helpful

    what plugs do you really have.. that was confusing? This is a Macbook (not pro)?
    First, it could be as simple as going to System Preferences|Displays| and choose to "Detect Display". It may not be recognizing you plugged something in.
    If you want to connect you should probably get the proper Apple mini-dvi adapters to match exactly what your TV has. I use the adapter from mini-DVI-to-DVI with my DVI-ready TV and it works great. They have one adapter for mini-DVI-to-VGA, and one from mini-DVI-to-Svideo. Note that multiple adapters assume you have 100% compatible input when often adapters "cheat" on the actual output side... data and signals are probably not getting thru... your Mac can't recognize the TV as connected.
    If you want to live dangerously, you might try using the mini-to-DVI adapter with a DVI-HDMI cable (single cable, no adapter) and see if that works (HDMI is a legit DVI spec so it should work, it works in reverse for my DVD player to TV connection)

  • Help how to connecting Oracle SQL Developer 3.0  with Oracle Database 11g

    Hello,
    I'm new in oracle developer yesterday i setup in my laptop database 11g the last version (11.2.0.1.0), well i follow steps still i got succeed to install, and i got my local host URL and i test my user name and password work very well, my problem now is i try to connect database 11g using Oracle SQL Developer 3.0 (3.0.04.34) but always filed and with my little experience i don't know where the wrong. as i said i test database after finish install is work fine the my URL is https://Ahmed-HP:1158/em and i test my username and password that i already set before is enter normal in my local database, please i need help to know how i connect database with Oracle SQL Developer 3.0 (3.0.04.34).
    Thanks,

    885173 wrote:
    EdStevens, thanks for your quick answer, sorry for my explain was doesn't clear, i open oracle sql developer and choose new connection i set connection name system_orcl username:system password:*i set my password that i create when i setup database*
    -Now the link that i got after finish install database is https://Ahmed-HP:1158/em so i have question about this point Hostname and port if the link to access database is this https://Ahmed-HP:1158/em so this mean i typing at Hostname:localhost and port:1158 ?
    because the message when i test connection always is filed and I'm sure i typing username and password and SID:orcl as i set when install database.port 1158 is what the dbcontrol (Oracle Enterprise Manager) is listening on. OEM is NOT the database. As far as the database is concerned, OEM is "just another client".
    Actually, the database doesn't listen for requests on any port. There is another process, the "listener" that listens for requests to connect to the database. Typically, it listens on port 1521. You should have a tnsnames.ora file set up to resolve a connection request to the correct host. You can read more on this at http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/

  • How to connect MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50

    Any experience with cables for connecting MacBook Pro 17" Mountain Lion with HDMI port on TV, Panasonic TC-P55ST50 (or similar)?

    It depend upon the model (age) of you MBP.  If you have a Thunderbolt or minidisplay port, then you will need a minidisplay/HDMI adapter.
    eshop.macsales.com/item/NewerTech/CBLMDPHDMI/
    Or you can get an all in one:
    http://www.amazon.com/Cable-Matters-Premium-DisplayPort-Thunderbolt/dp/B004CADYD O/ref=sr_1_3?s=electronics&ie=UTF8&qid=1361985588&sr=1-3&keywords=minidisplay+hd mi
    If you have an older mac with a DVI port, you will need something like this:
    http://www.amazon.com/DVI-HDMI-Cable-6ft-Male-Male/dp/B0002CZHN6
    Note that audio is supported via HDMI for MBPs 2010 and later.  Earlier ones require tapping the audio output port.
    Ciao.

  • How to Connect Macbook to a TV

    Hi there
    Does anyone know how to connect a mac book to a TV with a Scart input?
    I was hoping to watch you tube on my Home TV - that kind of thing and I cant seem to find the correct lead, its probably very basic stuff - but I don't know! thanks in advance

    GfulDedFan wrote:
    Apple makes a:
    [mini-dvi to video (s-video and composite)|http://store.apple.com/us/product/M9319G/A?fnode=MTY1NDA3Ng&mco=MjE0ODUwMg]
    [mini-dvi to dvi|http://store.apple.com/us/product/M9321G/B?fnode=MTY1NDA3Ng&mco=MjE0ODQzNg]
    [mini-dvi to vga|http://store.apple.com/us/product/M9320G/A?fnode=MTY1NDA3Ng&mco=MjE0ODQzNQ]
    Then you would need to go from the composite or s-video or dvi or vga to scart somehow. From what I've found in a search, s-video to scart is the most common.
    http://www.svideo.com/svideoscart.html

  • I can't connect OS X Yosemite 10.10.2 version with Canon LBP2900 Printer, Please help how to connect...

    Hi.... Apple Support Communities...
    I used Apple MacBook Air 2014 (13 inch) series with OS X Yosemite 10.10.2 version...
    And I have a printer of Canon LBP2900...
    My problem is that, I can't connect my Canon LBP2900 printer with my new OS X Yosemite 10.10.2 version.
    My previous OS X Mavericks is working well with my Canon LBP2900 printer...
    But when I upgrade it to OS X Yosemite 10.10.2 version, my printer is not working...
    Anybody please help me how can i connect OS X Yosemite 10.10.2 version with my Canon LBP2900 printer....
    Thanking you.... Your suggestion in this regards is highly appriciate...

    Your first step would be to upgrade to Snow Leopard (10.6). To do that, you would need to purchase the Snow Leopard DVD. Following that you could determine how much further you could upgrade.
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • How to connect Macbook Pro to Samsung Flat Screen TV

    How do i connect my Macbook Pro (2-3 years ago) to Samsung Flat screen TV (Samsung UN22F5000 22-Inch 1080p 60Hz Slim LED HDTV). Currently, I just discovered that my HDMI port on the TV said "DVI". So, i came to the conclusion that I need to get the DVI to HDMI cable (male-male), and mini display-port to DVI (female) adapter cable for Macbook Pro. The question is am I correct?
    I have tried looking at the back of the Samsung flat screen, but there has no VGA to PC port (female). Therefore, i googled and tried to find a way to connect my Mac to the Samsung flat screen TV. As i mentioned above, I came to the conclusion that I need those things. I just want to make sure that my assumption is correct. Thank you

    Dear Varjak Paw,
    Thank you for replying to this topic. Yes, it is true that there are 2 HDMI ports. However, one of the HDMI ports has something written on it, which is (HDMI In 1 STB). While, the other one stated "HDMI In 2 DVI". Moreover, I tried to plug in the HDMI cable into HDMI In 2 DVI, and it doesn't fit. While, plugging in to the STB does fit. Do you know what are the differences?
    Thank you
    Sincerely yours,

  • How to connect Macbook to HDTV

    Hello Mac community,
    When i first bought my macbook back in late 2011 it came with OSX Lion already installed. I bought an hdmi cord and a thunderbolt attachment cord (idk what its actually called but the hdmi cord goes into the smaller one which in turn plugs into my macbook) and would connect it to my HDTV and run movies and music etc through my computer onto the tv. I had no problems with it until i upgraded to OSX Mavericks and yeah no more explaining needed. After that it switched to this new 'airplay' thing which requires an apple tv i assume? anyway i saved all my important info and restored to factory settings and installed lion back to it. however, for some reason i am still unable to stream ANYTHING to the hdtv. It still displays airplay (airplay devices not detected) or something to that nature and will not register my hdtv as even being connected. its alittle frustrating to say the least. is there anyway to fix this because it used to work perfectly fine until the upgrade.
    thanks for your help and for reading this long post.
    p.s. i do have osx mountain lion now installed which i used to also stream from. if that helps at all?

    Your postscript prompts me to ask: When you boot from that Mountain Lion installation instead of Mavericks, does the connection still work there? If it now fails on Mountain Lion, suspect a hardware problem instead of a Mavericks problem.
    I think Mavericks should still support a display through the MDP/TB-to-HDMI adapter/cable alongside any AirPlay options. What brand is the adapter?

  • How to connect Macbook air to tv via airplay ?

    How do I connect my Macbook Air to tv via Apple TV and airplay ?

    Hello wayneharlow
    You should see an AirPlay button in the Menu Bar in the upper right hand corner near the Date and Time. If you do not see it, then you may need to turn it on to show up there, then it is a matter of selecting the Apple TV from that drop down menu. Check out the article below for more information and troubleshooting if needed.
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/ht5404
    Regards,
    -Norm G.

  • How to connect macbook to HD TV?

    I would like to watch my pictures from Iphoto to my HD TV and stream some movies from the mac to tv, how do I do that?

    You didn't specify what your macbook model is so I will assume it has a mini-displayport or thunderbolt port (interchangeable for this purpose).
    For mini-displayport/thunderbolt you have a mini-displayport/thunderbolt to HDMI adapter and of course a HDMI cable.
    Set the TV to the input you connected the HDMI cable to.
    On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection.  Try clicking Detect Displays just to see if the computer can now sense the presence of the connection.  Check your cables and make sure the mini-displayport plug is pushed firmly in.  Mini-displayport plugs can be a little tricky in that you need to make sure the plug is fully seated in their socket.
    If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image.  Set the proper resolution (probably 720p, 1080i, or 1080p).  Set the refresh rate (probably 60Hz) if that preference is shown.  You should see a picture at this point.  I  recommend turning off mirrored displays if it is enabled.
    You may have to play with the underscan/overscan settings on your TV and the displays prefs for the TV if the picture is too small or larger for the TV screen.
    Also, you need to set your Sound preferences to output to the HDMI connection.
    And if running Lion, do not run in full screen mode.

Maybe you are looking for