Help! How to export for specific resolution?

What is the best resolution to export photos for Facebook/Blog/High Res?

Resolution is set in the Export dialog under the Image Sizing section.
For Facebook/Blog and any other screen display usage, it does not matter what you set the resolution value to as the file returned will be the identical in pixel dimensions - regardless.
For applications where you print to physical media (paper, Tshirt, coffee mug, etc) 300 ppi is a good starting value. Large format stuff with farther viewing distances can be less.

Similar Messages

How to export user specific layouts to another user ID's

Dear Experts,
We saved some ALV layouts as a User Specific, now I want to export those layout to another user ID,
for example in User ID “X” I saved some ALV layouts as user specific now I want to move those ALV layouts to another user ID “Y” , but my “X” user Id is blocked how to export those layouts to another user ID, Kindly Help me out.
Thanks & regards,
AIM

Hi
You have to create a NOT User specific layout. This will be available for all the users depending on your security authorization. You cannot move a user specific layout from one id to another
Regards
Sanil Bhandari

Please help - How to export HTML file into MS word format

How to export HTML file into MS word file without any change
in design format?
As I have been trying to do that but problem is coming in
formating. Table's witdth and height get disturbed in MS word when
I import the html file.
What I do after creating HTML in dreamweaver I save that file
into .txt format in dreamweaver. and then import it in MS Word. And
I tried too much for it but invain.
Please help me in finding the way of solution.
Please help me as my job is in trouble. It's very urgent
pleeease help me. I'll be thankful to you.

Just open the HTML file in Word.
Walt
"apollo321" <[email protected]> wrote in
message
news:gavbhd$6j4$[email protected]..
> How to export HTML file into MS word file without any
change in design
> format?
>
> As I have been trying to do that but problem is coming
in formating.
> Table's
> witdth and height get disturbed in MS word when I import
the html file.
>
> What I do after creating HTML in dreamweaver I save that
file into .txt
> format
> in dreamweaver. and then import it in MS Word. And I
tried too much for it
> but
> invain.
>
> Please help me in finding the way of solution.
>
> Please help me as my job is in trouble. It's very urgent
pleeease help me.
> I'll be thankful to you.
>

Help please with exporting for print

Hi All,
Hopefully someone here can help. I have the opportunity to get some 24x30 inch lustre prints printed out for free but the printer has some specific file requirements which I am not 100% sure how to meet.
Here they are:
1. Colour space : Adobe RGB(1998)
2. File size must be 24x30"
3. Resolution : 300ppi
4. File : Level 12 (or lower) Photoshop JPEG
Questions:
1. I have calibrated my monitor with a ColorVision Spyder so I use that profile on my MBP monitor. I then usually export from Aperture using colorsync profile sRGB IEC61966-2.1. To meet the requirement above do I just need to change the colorsync profile on export to Adobe RGB(1998) or should I be doing something while editing?
2. I use a Nikon D70 so my files are 3024 x 1998, how do this translate to inches? Do I need to up size the files and if so how do I do this in Aperture?
3. I take it all I have to do here is change the DPI setting on export to 300 (is DPI the same as PPI?)
4. I think this just means the image quality will be set to 12 on export.
Sorry for all the questions but getting prints done at a lab is something new to me and I would like to try and get the best results.
Thanks in advance,
Andrew

Hi Ian,
Thanks heaps for your quick reply. In regards to your answer for the 2nd question:
"2. You definitely need to upsize the files, 24x30" at 300ppi is 7200x9000px. You can use the 'fit within' option and give a size in inches and it will upsize as needed on export. Note that 24x30 is a drastically different aspect ratio than your 3:2 dSLR shots, so you may also want to crop the images to the 5:4 aspect."
Can you please advise what size, in pixels, I would need to crop to plus will this make the image less sharp, therefore I should sharpen more? Sorry I have never up sized and printed an image before so not sure if there is a correct way of doing it (I think I read somewhere you should up size in increments of 10% or something?)
Cheers.

How to export for both windows and mac users

I'm new to the video stuff, so i have a few questions. i am planning to post videos on my blog. I want to have them in a format that both windows and mac users can play. is this a possibility or will i have to export .wmv for windows and quicktime for mac? i realize that windows users can download quicktime, but i either want the video to be viewable in a format that can be read by all without having to download anything (might be too big a wish :o) ). if i can't do that, then i'd like to have 2 links - one for quicktime and one to the .wmv. in this case, how to i export a .wmv file? i don't see that option anywhere on the share menu? do i need to buy quicktime pro? that leads me to another questions - if i have imovie, do i need quicktime pro? so far i'm having a hard time figuring out what quicktime pro has that imovie doesn't....thanks in advance!

I'm new to the video stuff, so i have a few questions. i am planning to post videos on my blog. I want to have them in a format that both windows and mac users can play. is this a possibility or will i have to export .wmv for windows and quicktime for mac? i realize that windows users can download quicktime, but i either want the video to be viewable in a format that can be read by all without having to download anything (might be too big a wish :o) ).
Posting to YouTube and providing a URL link might be the most universal method of playback although quality may be on the weak side.
if i can't do that, then i'd like to have 2 links - one for quicktime and one to the .wmv. in this case, how to i export a .wmv file?
WMV is a proprietary compression format. You will either have to purchase the authorized QT components from Flip4Mac or purchase a separate open source converter application like Visual Hub.
i don't see that option anywhere on the share menu?
Any you won't even if you purchase and install the QT component -- iMovie '08 only exports to QT compression formats.
do i need to buy quicktime pro?
It wouldn't help. Getting QT Pro only unlocks editing and conversion features. It does not add any additional codecs which don't already have installed.
if i have imovie, do i need quicktime pro? so far i'm having a hard time figuring out what quicktime pro has that imovie doesn't.
As indicated above, QT Pro allows you to convert to/from any compression formats for which you have working import/export QT components. This can already be be done using GarageBand and iMovie. GarageBand allows you to access any installed QT import/export component while iMovie '08 restricts you to Apple QT components. In addition, QT Pro allows you to create player displays with multiple audio/video tracks, gives you ability to layer graphic elements (e.g, create watermarks, create pictures-within-pictures, etc,), allow the viewer to switch between alternate audio and/or video tracks, and may other things.
ADDED: If you really want to see what QT Pro can do, check out QTKirk's examples on his DotMac account.
Message was edited by: Jon Walker

Heartbeat failure monitor - how to adjust for specific agent

hi guys,
in our environment we put the default heartbeat settings to 10 samples and 60 seconds intervals.
i have a customer asking for different values on a specific machine hs is the owner of. i looked around and found this:
http://technet.microsoft.com/en-us/library/cc540380.aspx
acording to this article, i can change the interval for a specific agent but i can't do the same for the amount of samples (it says i can only control the amount of samples at the MS level). is that indeed correct? i mean, if i want all my environment to
have a value of 10 samples and 1 specific server to have the value of 5 samples, it can't be done?
thanks a lot,
Uri

Hi,
You could change the Global Heartbeat Settings,it change the heartbeat interval at the global level. Changes made in this procedure affect all the agents in the management group.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HOW TO EXPORT FOR MAX DVD LENGTH?

Here's my issue:
I'm used to exporting my timeline from FCP using standard DV/NTSC QT conversion to then burn DVDs using DVD Studio Pro. But I can only seem to fit about an hour and 15 minutes max onto the DVD.
I recently taped several long meetings for work that I'd like to fit on as few DVDs as possible.
How do get more than a bit more than an hour on a DVD? Is this in the compression in FCP or DVD Studio Pro?
Thanks in advance!

Use Compressor. It has presets for 60min, 90 min, and 150min.
Shane

How to export for general viewing

I am very new to keynote. I made a basic 30 sec commercial/promo. I would like to send to all the people within my work place. The problem is that 90% of the machines are Windows/P.C.'s
How can I export so that
- they can open the file and view it
- it is a reasonable size to email
Help?
I have a couple of cool effects from keynote that I would like to keep. The effects are nice if I didn't want them I would have used powerpoint.
Any thoughts.
Tig

you can export the keynote to power point. be careful, in the past i have realized that some formatting is off. just give it a test trial before sending it to everyone.

Help How to Delta for ZBBPBW_DOCREL_SELECT - SAP Note 501836 / 931998

Dear Guru's,
We have applied the SAP Notes 501836 and 931998 in order to create the extractor mentioned above. In SAP note 501836 it mentions:
<b><i>Note forSRM 4.0:</i>
In SRM 4.0, the generic extraction also supports the delta update procedure. For you, this means that you can also use the delta update procedure for the extraction of the document flow.</b>
Has anyone adopted or managed to make this extractor delta capable, if so could you please share how to achieve this.
Thanks and Kind Regards,
Alex

Hi Rana,
There is no need for you to set any thing for delta.
As normal run the IP with init with data transfer and then next enable delta for the next load.
Check for the Below matter which explains how the delta is carried in the case of FI data sources.
Financial Accounting line items are read by extractors directly from the tables in SAP R/3. A time stamp on the line items serves to identify the status of the delta data. Time stamp intervals that have already been read are stored in a time stamp table. The delta dataset is transferred to BW directly, without records being transferred to the delta queue in SAP R/3 (extractor delta method).
The Financial Accounting line items are extracted from SAP R/3 in their most recent status (after-image delta method). This delta procedure is not suitable for filling InfoCubes in BW directly. Therefore, firstly, the line items must be loaded in the BW system in an ODS object that identifies the changes made to individual characteristics and key figures within a delta data record. Other data destinations (InfoCubes, ODS objects) can be provided with data from this ODS object.
For more details check the below link
[Financial Accounting: Procedure for Line Item Extraction|http://help.sap.com/saphelp_nw70/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm]
Regards
KP

How to export for System Copy

I know I can import the database using system copy in sapinst but can someone please explain how do I export the existing database so that I can import it.

Hello Rajesh,
the same way as you do an import.
In the sapinst menu is a point for exporting the database.. that is what you are searching for.
Regards
Stefan

Help, how to export emails from mail app

hi guys: I did not uncheck the box remove emails from the server after ..... so my hotmail on the server are gone. i want to have email copys stores on the server, since i need to check hotmails from any computer, not just on my home computer where the emails backup copys are stored. so i want to export my emails from the mail app in the mac back to hotmail server, how can i do that?? please give me a hand, i will really appreciate

You can do it via Mailbox>Archive Mailbox. And also, based on what you're saying you have Hotmail set up as an POP account in Mail. Don't know if Hotmail offers it, but if you set up the Hotmail account as IMAP in Mail then the behaviour will be different. You will have two copies of the emails on both the server as well as the computer. Go to Hotmail's help section and type in keyboards like "IMAP" and "Apple Mail."

How to Export/Import specific/selected table columns (can database view be

All,
I like to export and import some selected columns and rows of a table from one oracle database to another database.
For example, I like to export the following SQL's result data to another oracle database.
select ename, sal from emp where dno = 100;
Can I create a database view based on the above SQL and export the view with data (I don't think data will be exported along with database view?)
I know, I can do this either with SQL*Loader or by creating DBLink between databases and using insert-select statement.
Please let me know if this is possible in exp/imp.
Appreciate your help.
Thanks
Kumar

Hello,
You can Query and table option to export and import and i recommend you to create parameter file to use query option
parfile.par
file=myexport.dmp
tables=table1,table2,table3
query="where dno=2"
..Conventional export/import, you can also consider using datapump if you are using 10g.
exp username/password parfile=parfile.par log=myexport.log
imp username/password file=myexport.dmp tables=table1,table2,table3 log=myimport.logRegards

Help - How to export to tape?

A little background.....I used to a lot of work in iMovie6 HD. When I bought my Mac with iMovie 08, I hated it, so I downloaded iMovie6 again. I then bought Final Cut Express, which is wonderful, but too complex for me. Recently, largely for image stabilization and themes, I bought iMovie 09. I currently use a Sony MiniDV camcorder, which I love.
I'm a young parent with very limited time to edit - so I would now like to do most of my work in iMovie 09 - despite its shortcomings. But when my projects are completed, I would like to export them back to my DV tapes for a good, non hard drive backup. This is also the easiest way to play them on my plasma & saves me having to burn a dvd. Of course, it appears that iMovie 09 does not support this feature.
So what is the best way for me to export to tape from iMovie 09 projects with the smallest amount of quality loss. I imagine I can export it to either FCE or iMovie6 - but am not sure what is best. I also am not up to snuff on settings and how to do it if I do it via quicktime, etc. Any thoughts on the best way to do this would be great.
MANY THANKS!
jake

Hi(Bonjour)!
I would go with the import of your iMovie 9 project into FCE 4.
See this tutorial:
http://movies.apple.com/movies/us/apple/finalcutexpress/2007/finalcutexpresstutorial_importfromimovier640-10cie.mov
Once converted into FCE, use the print to tape command.
I don't think that iMovie HD 6 could open iMovie 9 project, but you can ask on iMovie 9 Forum.
Michel Boissonneault

How to query for specific filename

I'm using a modified folder_action script to ftp files up to a server once they're finished being created.
Is there a way to query for a specific filename to be present in the folder prior to passing it to the actual ftp function? The catch is that the filename will always be in the format of <mmddyy>.mp4. During the process that is creating the actual file to be ftp'd, various temp files are created prior. I'd like to ensure that only the final version of the mp4 is acted upon, which is the one with the mmddyy as the filename.

The folder action already has the folder and the item paths passed to it, so you can get the individual file name by using something like:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;"
title="this text can be pasted into the Script Editor">
on adding folder items to this_folder after receiving added_items
repeat with AnItem in added_items
if text (count (this_folder as text)) thru -1 of (AnItem as text) is "<mmddyy>.mp4" then
-- whatever
end if
end repeat
end adding folder items to
</pre>
There are also temporary folders that the system provides, so you shouldn't have to use the folder with the attached action at all:
get path to temporary items
get path to temporary items from user domain

How to SEARCH for specific file TYPES, e.g. PDF?

If I know the title has in it "resume" and I know it's a PDF, how do you search for all PDF files that have the word "resume" in the title?
AND..
How would you search all PDF files that had the word "supervisor" inside the document?
Thanks

Command F should do it. Once the search window appears, you should see a drop down box headed kind and next to it one headed any. Select PDF from the any one. Click the plus button, and another field will appear and you can see again more drop down boxes. You just want to set these up so you end up with name and contains, you can then add your text to the remaining field.
Also see [this|http://apps.tempel.org/FindAnyFile/index.html]
Message was edited by: gumsie

Help! How to export for specific resolution?

Similar Messages

Maybe you are looking for