HELP !!! how to hear a simple sound from software instrument ????????

It's a simple question, but I lost half an hour to find a button to hit play and hear one single sound from software instruments, but no success. I saw the video tutorials and they skip the basic.
Very frustrating, I think I will have some difficulty in understanding how this program works.
I cannot do nothing with it, besides adding chapters and songs from itunes.
I need to take a course in Garage Band.
I found it. It's a keyboard.
Message was edited by: Pedro Santos

http://seminars.apple.com/seminarsonline/garageband/apple/index1.html this is a helpful seminar with 3 videos you can watch a 31 minute & 22 min & 16 min, they should help watch them over & over

Similar Messages

I hear buzzz type sounding from my laptop. What is wrong with it?

I hear buzzz type sounding from my laptop. What is wrong with it?

I have the same problem with my 5th-generation iPod! In addition to the red-slashed circle, my iPod will not show up in iTunes nor will it charge until I forcefully eject it and reset it.
Here is how I have learned to "fix" this problem over the years: make sure your iPod is fully charged before you try to plug it into your computer. The red-slashed circle comes on initially but you'll see that there's activity going on pretty quickly. The key seems to be having the iPod completely charged; even the slightest bit of depletion of battery makes everything go wrong.
If this fails, make sure iTunes is already open before you plug in your fully charged iPod. Finally, if this fails as well, disconnect your internet connection, have iTunes open, and then plug in your fully charged iPod. These last ideas are probably more placebo than truly useful, but I have had luck with them when I'm ready to throw my iPod and laptop out the window.
Hope this helps.

How do I remove the sound from a video project and replace with music...?

Hi there to all...I would like to know how you remove the original sound from a movie (using iMovie) so you dont hear it through any music added...?

Select the video clip and open the clip inspector to the video tab. You can set the volume slider to zero.
You can apply this to a bunch of clips at once.
Do the first one.
Then Edit/Copy.
Then Select the clips to apply it to by select while holding command key. (or EDIT/SELECT ALL to get all clips)
Then EDIT/PASTE ADJUSTMENTS/AUDIO ADJUSTMENTS

How can I silence the sounds from the Camera, "klick (camera" and "ping (video)"?

I need some help. How can I silence the sounds from the Camera, "klick" (camera) and "ping" (video)? Sometimes you'd like not to let others know that you're taking a picture/recording.

Plz help .....no sound from my iPod touch 4

Plz help...I have no sound from my iPod touch 4th gen........I asked google and it said maybe my headphone jack is stuck.....huh

Try:
iPod touch: Hardware troubleshooting
No sound with Headphones only?
No sound with speaker only?
No sound with both?

How do I keep my sound from fading?

How do I keep my sound from fading?

My wife has the same problem. I believe I found the solution. Activate "do not disturb" in settings - do not disturb - manual. Make sure to also go to allow calls from and set it to no one. A moon will appear in the status bar. You will see notifications of missed calls but it does not interrupt Pandora. Let me know if this works for you.

Hi I am new on the Mac, I need help, how can I run my apps from my library on my Mac Pro? All my apps I was used in my iPad, thanks guys!!!!

Hi I am new on the Mac, I need help, how can I run my apps from my library on my Mac Pro? All my apps I was used in my iPad, thanks guys!!!!

The Mac OS X and iOS versions are separate products

How can i send simple message from PC-to-another device

How can i send simple message from PC-to-another device
just simple message (like command String) not SMS or Data File.
I have a computer with bluetooth and the oter side is Embeded Blue
Thanks.

http://www.oracle.com/technology/products/integration/bam/10.1.3/TechNotes/TechNote_BAM_AQ_Configuration.pdf
This document details how to create triggers on a table that send out JMS messages.
In this example, the messages are going to Oracle BAM.. your message could go to your J2EE application listening to its own topic/queue.
an alternative idea.
you could also just cache your lookup table with something like Oracle Coherence and than try to ensure that all changes to the lookup go through Coherence, so that you won't need to do notification from the db up to the application. the application and the lookup data management tool would be using the data grid for management of the lookup table data, and the data grid (coherence) would persist the lookup data changes back to the db.

I recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ? or can you run both versions on OS10.9.5 ?

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

I recently got new mac air and transfered my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record shows its recieving sound from software inst. but no sound. I checked audio preferences OK

i recently got new mac air and transferred my old version garageband projects now when I open them in 10.0.2 I can add new tracks but then nothing can record, shows its receiving sound from software inst. but no sound. I checked audio preferences and they are set as they should be. I tried it in all the other older projects and same issue anyone have any experience like this very frustrating. Can one download old version still ?
thanks,

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

HT4623 How do I Upgrade my iPad2 from Software Op Version 4.3.5 to IOS 6.0.

How do I Upgrade my iPad2 from Software Op Version 4.3.5 to IOS 6.0.

If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
This process will upgrade the iPad to 6.1.3

How do I mute the sound from the video camera when burning a DVD

Hi there. I'm a new user of Elements 8. I have compiled some clips and added a soundtrack to the movie, When you preview the file you don't hear the sound from the video camera but when I burn it to a DVD you still hear the video background. How do I burn the DVD without the background sound from the video camera? On the DVD I only want to hear the soundtrack I added.
Thank you,
Doug

Thanks guys. Both options worked. Dowside to deleting audio (option I went with) appears to be that you lose the audio forever. So if I ever wanted to bring the audio back I wouldn't be able to.
You are partially correct in that the Audio is no longer on your Timeline. It is still in your Project Panel, and you can move it back to your Timeline if ever needed. The complete removal from the Timeline is why I work with the Audio Mixer in cases like this. Also, on could alter the Gain on a Clip by Clip basis.
With using the audio mixer it appeared I had to mute each clip separately. When I highlighted all the clips and selected mute for audio 1 it wouldn't mute all of the selected clips.
The Audio Mixer works at the Track-level, and not at the Clip-level. That is why I use it so often - one click, or slider adjustment affects the entire chosen Track. If it did not work at a Track-level for you, something is wrong. Now, if one has Clips on different Tracks, then Muting of all of those would be required, or one would have address things on a Clip-level basis.
Any way to use the audio mixer to mute the clips in mass?
See above for how it should work, and also the exceptions - Audio on several Audio Tracks.
Good luck, and remember that your Audio still resides in the Project Panel, should you ever need it again.
Hunt

Help: How can I read an integer from keyboard

Hi,
I am new to java, and I know how to declare integer variable,
but how can read an integer input from keyboard and assign it
to the variable.
Can anyone help me on this.
Thanks
Studentfj

the easiest way is to
import javax.swing.*
and use the methods and functions in there
otherwise from command line i think as far as i remember it is System.in

HELP: How do I print a photograph from my computer (not from a memory card) with photo quality ?

HP6510 print-scan-copy-web (All-in-one) ePrint wireless
Mac OS X 10 6.8
How do I print a photograph from my computer (not from a memory card) with photo quality ?
Is there a software that enables me to let the printer know that what I am sending to print is a photograph and not, for example, a document?
I sent a photograph to print from I-Photo and from Photoshop and the printer prints it like a document, that is to say, quickly and with very poor quality...for what is a PHOTOGRAPH.
I bought my print yesterday in Spain and Monday I must turn in a printing job at work. Pleas help. (Today is already Saturday.)
Thanks

In OSX when you go to file and print you will usually get a window that pops up with print settings.
In 10.6 it may only show you the printer to use, and the preset to use, but you can click the square to the right of that with a triangle in it to view more options.
From here there is a drop down for paper type/quality, where you can select photo paper, and a higher quality, then go to print.
The following link will actually show screenshots of these settings and how to navigate them:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01662562&tmp_task=useCategory&cc=us&dlc=en&lang...
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

27" iMac starts up and stays on white screen and I hear a clicking sound from inside.

I am starting up my iMac and it is frozen on the white screen and I can hear a clicking sound coming from inside?

Hi,
I'm agree with Roger, that could be a HD Failure, but that happens to me once, and the problem was on the Power Supply, so I took it to an Apple Service and it was changed.
At last but not at least, this type of problems could come from the mother board (hope this not to be your case).
Regards,
:: Appletoch ::

HELP !!! how to hear a simple sound from software instrument ????????

Similar Messages

Maybe you are looking for