Help - How to install Win XP in dual boot with Win 7 (first installed)?

Hi everybody!
I'm having some difficult in install a win xp in dual boot with win 7 (which came with the G550 notebook).
I modified the D: (Lenovo) partition to a primary partition to install the XP. Also I installed the EasyBCD to manange the boots and both S.O. load fine.
The problem is that Win XP is seeing a partition (the first partition on disk) with 200MB that is hidden for Win 7 ! So this partition takes the C: letter in XP and mess all the configuration once that many programs uses the C: as a default letter.
The disk is divided in (aprox):
200 MB hidden partition (from factory)
160GB with Win 7 installed
40GB with Win XP installed
19GB hidden partition (Recovery - from factory)
Is anyone has some idea who to solve this problem or make install XP from the beginning without problems?
Thank a lot!

jay4baps wrote:
Are you sure VMWare Fusion 6 is Launched??? give me link then i download it...
It's version 3.1

Similar Messages

How to install Arch for dual-boot with Win 7 (on 2 hard drives)?

Hello,
the TLDR first: how exactly should I proceed when setting up GRUB for 2 hard drives to dual-boot Arch (64 bit)and Win 7 (64 bit)?
Long version: So, I have the following hard drive & partition layout:
On my first hard drive (250 GB big) I have: Win 7 64 bit, all the programs for Windows and of course the EFI partition
My second hard drive is 1 TB big and formatted in NTFS and it only contains data. It has 2 partitions, one is about 750 GB big and used for simple storage.
Sidenote 1: sometimes my disk management (Windows' own gparted) shows either the little disk or the big one as disk 0. Don't know what exactly this means, but I have never ever experienced any problems whatsoever during use.
Sidenote 2: the UEFI motherboard (ASRock H67M) cannot boot into Legacy mode.
I want to install Arch on a ~200 GB partition on the second hard drive (the one with 1 TB). (click here if you want to see a screenshot) I am posting this because I am confused with how exactly I should deal with the whole "2 hdds & UEFI" thing.
So how exactly should I proceed when setting up GRUB for this setup?
For partitioning I suppose I would have to use fdisk or cgdisk. I used cgdisk before and found it to be straightforward. Then, because I have experienced my fair share of problems with rEFInd, I'd like to use GRUB.
Last edited by jones (2013-06-29 14:36:56)

First thing you should do is become familiar with your motherboard.
http://www.asrock.com/mb/manual.asp?Model=H67M
This will probably help you out in understanding the sidenote 1 thingie (hdd's on sata3 and/or sata2 connectors)
As on sidenote 2, according to the manual it seems to be possible to boot legacy mode, see Storage Configuration.

How do i set up a dual boot with windows

I am trying to set up a dual boot system with both the snow leapard and win 7, I have partioned the drive and have windows booting up. How do I get the drivers for the machine that windows will recognize. I am researching this for my dad his I mac is one of the new 21 inch models.

If you want dual boot you would use Boot Camp which is built into Snow Leopard. You will need a license of WIndows 7. You can install it by using Boot Camp Assistant however prior to doing so you probably should look at how it's correctly done, here is a You Tube Boot Camp instructions video I would recommend you watch first.
If your dad wants to run Windows 7 & OS X simultaneously then he will need either Parallels or VMWare Fusion. Both are virtualization applications that allow one to run Windows and OS X side by side. This is a great solution unless he is a gamer or needs to run graphics intensive applications like CAD/CAM or 3D Games or anything that is 3D intensive. For all other types of applications virtualization is an excellent solution.
If you choose the Boot Camp solution there is a forum specifically for that which is where I'd recommend posting questions.
Roger

How do I set up a dual boot with 10.8 and 10.7

I want to set u a dual boot system using so10.8 and os 10.7 I have my disk for 10.7 and 10.8 is curently my os. I have an empety hard drive partition I want to install 10.7 on to but when I try to start up my computer with the instalation disk it gives me the "this computer needs to restart please push and hold your power button" message. Can any one help?
Thank you
Mike

How to create an OS X Lion installation disc
OS X Lion Install to Different Drive
Your system (OS) selection of where has to be done BEFORE any restart.
And you want to backup and retain a copy of the installer ".ESD" package first.
On restart it will self destruct the package.
A clean install on another drive or another partition.
I prefer to go with pulling the old drive.
Always retain backup boot ability and dual drive dual boot is just... safer.
If you're looking for an OSX installation disc, and, like me, you upgraded to Lion through the app store, you will have to go through a back-door process in order to create this disc. Here's an article on this. http://www.macworld.com/article/161069/2011/07/make_a_bootable_lion_installer.ht ml (I can't guarantee it works. I made a disc like this because I thought I needed it to reload from a Time Machine backup, but it turns out that Lion doesn't require the disc for this, so I never used it.)
When I installed Boot Camp and Windows, I didn't need the OSX installation disc. I'm not sure why you would, in this process. It should only ask for your Windows disc.
If for some reason you downloaded Windows from Microsoft instead of buying a package with a disc, you need to download the ISO version and burn it to a DVD. See this article on downloading the ISO: http://www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct-download -links-ultimate-professional-and-home-premium/ (Make sure you choose the ISO that matches the version you bought).
Here's instructions on burning an ISO with Disk Utility: http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc And this thread on burning a Windows DVD in OSX: https://discussions.apple.com/thread/2039118?start=0&tstart=0 (Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)

Dual boot with win 8.1?

If I disable secure boot and legacy option then It is possible to dual boot window 8.1 with linux???

Did you do a full disc backup of the C: Drive using a backup tool other than windows? If you did, then the recover of that partition will be up to your backup software.
If worse comes to worse, you can use the novo button to restore your computer to what it was like when it came from the factory. But there really is nothing to worry about. Create your new partition and just make sure that you install Linux to that partition. Make sure it is not the same size as any other partition, that way even if the Linux installer does not show the volume labels, you can tell which partition you want to install Linux in just by the size.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Win XP (in dual boot) is seeing a hidden partition

Hi everybody!
I'm having some difficult in install a win xp in dual boot with win 7 (which came with the G550 notebook).
I modified the D: (Lenovo) partition to a primary partition to install the XP. Also I installed the EasyBCD to manage the boots and both S.O. load fine.
The problem is that Win XP is seeing a boot partition (the first partition on disk) with 200MB that is hidden for Win 7 ! So this partition takes the C: letter in XP and mess all the configuration once that many programs uses the C: as a default letter.
The disk is divided in (approx):
200 MB hidden partition (from factory)
160GB with Win 7 installed
40GB with Win XP installed
19GB hidden partition (Recovery - from factory)
Someone has any idea who to solve this problem or to do a XP installation from the beginning without problems?
Thanks a lot!

first of all, i'm not sure windows xp works on your system.
secondly, you need to install previous operation system before. you can not install xp on windows 7 or vista.
if you do that, you may need to change boot volume or make changes on volumes. but one key recover will stop working.
so, i suggest you not.

Downgrade HP ENVY 15-u010dx to win 7, or duala boot win 7 and wind 8

i have brand new HP ENVY 15-u010dx with windows 8.1 installed.
Because of my needs (worrk related) i need win 7 installed.
Is it possible to install win 7 dual boot with win 8.1 ?
Does win 7 work on this machine, do you have drivers for win 7 x64
i'm asking this since i saw option in bios that has to be disabled to run win 7.
please help me..thanks in advance..

Hello @bigheadx,
I understand that your notebook computer takes a long time to reach the Windows log in screen after you power it on, and I would be happy to assist you in this matter!
To ensure there are no background programs or services that are slowing the booting process of your operating system, I recommend following the steps in this document on Windows 8 Safe Mode. I also suggest following this resource on Resolving slow system performance (Windows 8) to increase the speed and efficiency of your operating system.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I tried to install adobe reader in my PC with Win 7 OS 32 bit but after opting run nothing happens, please help

I tried to install adobe reader in my PC with Win 7 OS 32 bit but after opting run nothing happens, please help

installer
On Tue, Aug 19, 2014 at 12:21 AM, Pat Willener <[email protected]>

[solved] Can't set up dual boot Arch + Win 7 on separated disks

Hello everybody,
I'm new to this amazing project as I installed Arch just two days ago (and everything works like a charm in linux).
Anyway I have a problem and I'm very sorry to bother you with another question such this, but I tried everything and I accurately read the wiki.
The problem is that I can't manage to create a dual boot in grub with Arch on the first sata disk and Windows 7 on the second disk.
Before trying Arch I used ubuntu 10.10 dual boot with the same Windows 7 on the same secondary disk (the pc is a dell XPS L702X 17' laptop with, of course, dual disk bay) using GRUB2 which was automatically installed during ubuntu installation.
I tried to chainload windows disk in grub using map command to let windows think it's on the primary disk and not on second one.
At start I just had "BOOTMGR missing" error, then I put windows disk as primary removing arch disk and I repaired its bootloader: windows could boot then.
When I substituted disks and tried to boot, Windows 7 loading screen appeared and immediately I had a blue screen of death (or something similar) which anyway disappeared in less than a second (I was not able to read anything from that screen)
Now, when I try to boot windows either with grub or trying to enable boot straight from second hard drive in BIOS, I receive an error stating that it is necessary to use the windows repair disk to fix problems.
My question is: how can I finally fix this situation?
It would be quite important, for me, to not format neither of the disks, and I could even accept to renounce booting windows from grub as it would be ok even changing BIOS priority every time I need to use windows 7.
I really apologize for my annoying question but I really tried everything I could find without success; sorry for my poor english, too.
Anyway, this distribution seems just amazing to me! Thanks for your time.
Luca
Last edited by enigmatichus (2011-12-27 02:05:14)

It worked!!! Actually I don't know what changed, I proceeded removing the first disk (arch) WITHOUT, this time, changing the position of the windows disk. I used windows 7 DVD to repair the second disk. It tooks several attempts since it failed without specifying the problem. Eventually, I was able to boot windows 7, everything worked. Then, I plugged the primary linux hard drive and booted into arch, where I used "grub-install /dev/sda" as root. It executed without errors, but when I checked menu.lst file, surprisingly I discovered that it was not changed at all by grub-install.
Anyway it must have detected windows on /dev/sdb, since I am now able to boot both arch and windows without problems.
It was a weird situation, but anyway it worked well!! Thank you for the support, I really appreciate!
Luca

[SOLVED] Dual boot with ubuntu w/o installing GRUB? (YES)

Hi all -
This is my first shot at arch, tho I've installed a few other linux distros.
So far I really appreciate the excellent documentation, especially compared to other linuxes!
But I can't find a good answer to this question:
I already have ubuntu installed and would like to dual-boot with arch. (I also have Win7 but boot it from a separate disk selected via BIOS, and usually leave this disk disconnected anyway, so it's not an issue; grub doesn't know it exists).
Q: Before installing, can I make a new LOGICAL ext4 partition (say /dev/sda7),
- then install arch on that **w/o installing grub** and **without messing with the MBR**,
- then edit ubuntu's existing menu.lst to add arch to the boot options?
Current $ fdisk -l
/dev/sda1 ext4 primary/boot (/ for ubuntu)
/dev/sda2 extended
--/dev/sda6 linux-swap
--/dev/sda5 NTFS (data - mp3s, etc)
unallocated 480GB --> Create new ext4 partition /dev/sda7, (logical or primary? Prefer logical)
Current menu.lst entry that I normally boot:
title Ubuntu 12.04 LTS, kernel 3.2.0-24-generic REGULAR
uuid UUIDforSDA1 (file has actual UUID number...)
kernel /boot/vmlinuz-3.2.0-24-generic root=UUID=UUIDforSDA1 ro
initrd /boot/initrd.img-3.2.0-24-generic
and add something like this to menu.lst:
title Arch Linux
uuid UUIDforSDA7
kernel /boot/vmlinuz-linux root=/dev/sda7/ARCH ro (??? - from example in arch docs)
initrd /boot/initramfs-linux.img
or
kernel /boot/vmlinuz-linux root=UUID=UUIDforSDA7 ro (??? - like the ubuntu entry)
I'd really like to NOT mess up booting ubuntu! (Another option might be install arch to a separate disk with the ubuntu disk disconnected, then copy the whole install over via a USB adapter...I've done worse!)
TIA for any help!
Edit: so I guess there's three questions:
1 - Can I install arch w/o installing grub & MBR messing-wth?
2 - What's the correct syntax for menu.lst to access and boot arch?
3 - Will this work?
Last edited by Flemur (2012-05-25 15:24:18)

Well, it worked and booted up first time - no grub install.
The main hassle was merely creating a new ext4 partitions because "Partition Wizard" boot CD screwed up and I kept getting "Unable to update kernel until reboot" messages until I deleted and rebuilt all the partitions in the extended partition with puppy linux & gparted instead of Partition Wizard.
In case others stumble upon this trhread, here's some info:
The entry in the ubuntu (original) menu.lst was this:
title Arch Linux
uuid af7...etc...9f3c
kernel /boot/vmlinuz-linux root=UUID=af7...etc.f3c ro
initrd /boot/initramfs-linux.img
I'm even posting this from arch/fluxbox/Firefox, although getting X set up with nvidia (PITA!) apparently required using a different pacman source:
File "mirrorlist" now points to
Server = http://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
which wasn't in the original file.
Then
$ pacman -Su --> "/etc/mtab exists" --> delete it and something else broke,
so
$ pacman -Su --force --> worked fine (against official advice)
Also: needed to install nvidia-utils and xorg-xinit
Thanks again!

Help me find a sound driver for dual booting G7 with XP

I have a new HP laptop with Windows 8 64 bit.Model Number is: Pavilion G7 22251dx - Serial is {Removed for privacy}
The specs can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03561498&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
I have a clean install of Windows 8 64 bit after having wiped my factory default partition and reinstalled Windows under Legacy Bios Mode instead of the default UEFI. I added back all my drivers from the HP support site and Windows 8 is working correctly.
I'm dual booting with XP Pro 32 bit with service pack 3. I have no sound in XP Pro 32 bit. I have spent hours trying drivers and nothing is working.
I need both my video drivers (which are installed) with HD support and I need IDT drivers. Here is the hardware I'm using at least as far as Windows 8 shows.
The bundled sound driver is called sp59620.exe when you download it but it's actualy: IDT High-Definition (HD) Audio Driver VERSION: 6.10.6425.0 REV: A
This hardware information is taken from AIDA64 Extreme, which is a system information tool:
ATI Radeon HDMI (at) AMD K15.1 - High Definition Audio Controller PCI
IDT 92HD87B2/4 (at) AMD Hudson-3 FCH - High Definition Audio Controller PCI
I have searched for the driver manually, and used tools such as Slim Drivers, DriverBoost, Ma-config, DriverPack Solution and none of the drivers work ( also they all recommend different drivers LOL)
I'll be happy to provide any extra information you may need.
Thank you.

Hi:
First install the chipset driver and reboot. First download listed.
http://support.amd.com/us/gpudownload/windows/Pages/raid_windows.aspx#4
See if this XP video driver works
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=ob-107...
See if this XP audio driver works.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

Dual Booting With Windows 8?

So, I found this guide: http://www.neuraladvance.com/2012/11/17 … -uefi-lvm/. While I've ran and used Arch before a few times, it's been a while.
The problem is that the guide decides to use the Windows 8 partition itself to install Arch; what I would like to do is use my own partition for Arch, making it as independent as possible from Win8, and both booted with Grub. I've already wiped everything and reinstalled Windows 8 first, however I'm a bit confused as to how to properly setup a UEFI partition. Period. Are there any good guides on how to do this? The Dual Boot article on the wiki, unfortunately, wasn't very helpful in my case.
While I have the latest snapshot already on USB, it doesn't boot properly, not allowing access to /dev/tty (i.e., I can't do anything). Also, I unfortunately can't use GParted Live since none of my DVDs are rewriteable; they've already been used up over the years. So, if anyone has any suggestions on how best I can approach this (or good resources which are to the point; i.e., not too much details to wade through), it would definitely be appreciated.
Thanks.

holland01 wrote:
So, I found this guide: http://www.neuraladvance.com/2012/11/17 … -uefi-lvm/. While I've ran and used Arch before a few times, it's been a while.
The problem is that the guide decides to use the Windows 8 partition itself to install Arch; what I would like to do is use my own partition for Arch, making it as independent as possible from Win8, and both booted with Grub.
By "the Windows 8 partition," it appears that you're referring to the EFI System Partition (ESP) that Windows created -- /dev/sda1 in the referenced guide. I've only skimmed the article, but I didn't notice any reference to using any actual Windows partitions in it. Note that the ESP doesn't really "belong" to any one OS; it definitely is not a Windows partition. It is, as its name suggests, a partition that "belongs" to the EFI. It's meant to be shared across OSes.
That said, if you really want to, you can create multiple ESPs. This is legal according to the EFI spec. Unfortunately, it can cause problems, since the Windows 7 installer gets very confused if it sees multiple ESPs and an installation of Windows 7 will fail. I don't know if Windows 8 has the same problem, but if it does, and if you find that you need to re-install Windows, having multiple ESPs will complicate matters. Thus, I generally recommend sticking with one ESP per disk if at all possible. Be sure to keep it backed up in case some ill-behaved program trashes it, though.

I Would Like To Dual Boot With Nitroid

OK have got my phone where I want it - have installed all the speed enhancers after updating to PR 1.3 and am overclocking at 1150Ghz. It fairly zips along now
I have read how to install using the Auto Installer but am a little confused. Could someone answer these questions please: -
1. Will using the Auto Installer itself, allow you to dual boot automatically or must you install a spearate dual boot prog of some sort first?
2. If the Auto Installer does allow dual boot with your existing Maemo 5 OS, will it automatically place it on the separate SD Card? (mine is a 16Gb one). I also assume it will completely reformat the SD Card, is that correct? I am reluctant to proceed if it wipes the existing OS first etc.
3. I am confused with the options for Overclocking. I understand you can continue to Overclock Maemo 5 but can you Overclock Nitroid, once installed? If sow how?
4. I gather that overclocking defaults back to 650 either on reboot or on receiving an incoming call - is that correct or has it been fixed? And do these limitations apply when in Nitroid?
I would appreciate someone who has successfully ported this OS to their N900 and is dual-booting, to explain the current procedures and answer my questions - pointing me to the relevant resources as appropriate. Any tips too would be appreciated, given we now have PR 1.3.
Thanks in anticipation of your help and advices
Paul

Cheers Montana.
As you guessed, I used the 0.0.7 "Installer" because the version 0.0.8 refused to partition my SDHC Card - version 0.0.7 worked
However because it is an "Installer", I assumed it would install the most up to date version of Nitdroid on my phone. I am confused because I don't know which version I have.
At the moment Nitdroid is working ok, I have the correct multiboot and power boot kenels installed and can overclock in Mawmo as before - the multibooting giving me 3 options here to boot into Maemo without oc, to boot into Maemo with oc and to boot into Nitdroid.
HOWEVER I simply cannot connect to my WiFi - it authenticates then disconnects, it tries again several times before giving up and leaving me disconnected
I did have the Aipplane Mode problem but after tinkering around, I am free from this now and it is deactivated and the mobile network symbol shows up as "active". I have not set up an APN yet - not sure I have to as yet given that you cannot make (and receive?) voice calls but for the life of me, I have tried everything to connect my WiFi but am failing miserably
Ok this is the plan and maybe you can help please? : -
1. Find out what version of Nitdroid I have installed right now. I am aware that WiFi was activated from version 0.0.8 so if my Nitdroid is older than this then maybe this is my problem? Are the Installer versions and Nitdroid versions one and the same thing? FYI I can activate Bluetooth as these options are not greyed out - this tells me that perhaps I have the most recent version installed, unless this was activated from version 7?
2. Assuming that I have an older version of Nitdroid installed - I need step by step instructions as to how to UNINSTALL my current version of Nitdroid whilst leaving the Power and Multibooting options as they are and WITHOUT destroying the current SDHC Card's partitioning.
3. Finally I need to know exactly how to INSTALL the most recent version of Nitdroid
I am so near yet so far with Nitdroid and all the problems I have experienced have been sorted resulting in a massive learning curve and leaving me with the impression that my N900 is such a cool piece of kit.
Now if only I could go to the "Market".........
I have registered on the Nitdroid Forums but prefer to stay here for now as they are baffling me with science in terms of the lingo they speak lol! You guys make things sound straight forward
TIA
Paul

Dual Boot with OS X

Not quite sure where this should be posted, so I figured I'd post here. I came upon a rather large hard drive and I was thinking about dual booting with OS X. I meet the system requirements, but I'm not sure how easy it would be to integrate. I did some searching on the forums here, and on google, but I wasn't able to find much. I guess my main questions are:
1) Can GRUB load OS X from an external USB hard drive?
2) Is it possible to mount ext3 partitions from OS X?
3) Is there any common pitfalls I should be aware of before starting this?
Any help I can be given would be greatly appreciated!
David

1: Probably. OSX refusing to boot from the drive without grub even being considered is more likely than grub not doing its job. It wouldn't boot on my sata, for instance, but doing it from an internal ide worked fine [including Grub2], and I've seen examples of it working on legacy grub.
2: Yes. http://www.insanelymac.com/forum/index. … opic=34227
3: Not really, assuming you're using a real mac instead of a "hackintosh", but that doesn't seem to be so from your post [I would expect someone to say it the other way around, "I want want to dual boot -Arch-", if theyre using a mac machine]. I'm not sure what kinds of things about this topic would be shaky ground on the forums, so I'll try to keep from saying anything troublesome.. I will remove it if necessary, but I don't expect that to be the case. If you're using a "hackintosh", expect hardware problems (it can be a serious hassle and hack-job installing and getting everything to work) and highly probable legal issues (even if you own OSX). On a side note, I personally think OSX is the most boring, user-limiting OS in existence.. However, on the positive side, it pretty much does what it says it does if you're using the real deal, and does it well.
Last edited by FrozenFox (2009-04-15 08:51:06)

Arch does not show up in Grub when dual booting with windows 8

I just installed Arch linux, dual booting with windows 8 using the beginners guide[https://wiki.archlinux.org/index.php/Beginners'_Guide] itself. Now Grub is installed and i can only find Windows 8 and I cannot find Arch. Is there a way I can find if arch linux has been installed and show up in Grub.
Sorry, I am a newbie, but i chose to post this topic here and not newbie corner as it is installation related.
My windows 8 is installed on /dev/sda1 with ntfs partition type. Arch Linux is installed on /dev/sda6 and it is ext4 partition. I dont know if this info helps. I am using Thinkpad R61
Last edited by sutro_droid (2013-03-06 00:30:48)

ivokosir wrote:It may be that you didn't install os-prober before running grub-mkconfig. This happened to me once, I hope I'm not too late to warn you.
I am sorry, yes you are too late. I have wiped windows 8 and performed clean install. No regrets. And as a matter of fact, I did grub-config and then installed os-prober. That could be the problem. Thanks. I will try this again another time.

Help - How to install Win XP in dual boot with Win 7 (first installed)?

Similar Messages

Maybe you are looking for