Help - How to invoke Integration Builder

Hello Gurus,
It's a great forum to know more about XI, scenarios, blogs etc. I have a very simple question as a basic for all the scenarios -
How to invoke / start integration builder and integration repository. I am getting message "Integration Builder address not maintained" while running the SXMB_IFR.
Any comments, pointers will be great.
regards,
Sm

Hi Sri,
1) Were you able to open in exchange profile?
To findout, try the following URL
http://<hostname>:<port>/exchangeProfile
2) Make sure to check connection parameters in Exchange Profile and the following values are set
com.sap.aii.connect.repository.name
com.sap.aii.connect.repository.httpport
3)Make sure your J2EE server is running. You can find out by going to the URL http://hostname:50000.
Also complete all your post installation activities.
Also go through these links which will surely help you.....
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
Integration Builder Address not maintained
Regards,
Abhy

Similar Messages

Please Help PI Data Dependent Integration Builder Authorizations NOT Workng

Dear Friends / Experts,
I had spend many days and explored all Weblog and links on this website and implemented all the steps required to acheive Data Dependent Integration Builder Security and I am not successful so far. I am just giving up now - Please Help Me ---
As I said, I already read all the important Forum Links and SAP Web links and Followed Each and Every Step - service.sap.com/instguidesNW04 ® Installation ® SAP XI
Security Requirement - Data Dependent/Object Level Authorizations in XI / PI
In distributed teams or in a shared PI environment it might be necessary to limit authorization for a developer or a group of developers to only one Software Component or objects within a Software Component or to specific Configuration Objects.
Our Environment - PI 7.0 SP 16
Created a new role in the Integration Builder Design
u2013Add Object Types of any Software Component and Namespace
- Enable usage of Integration Builder roles in Exchange Profile
Integration Builder u2013Integration Builder RepositoryParameter com.sap.aii.util.server.auth.activation to true
Assign users to the newly created Integration Builder roles
u2013Create dummy roles in Web AS ABAP, these roles are then available as groups in Web AS Java
u2013Assign users to these roles
u2013Assign the Integration Builder roles to the above groups in Web AS Java
u2013Assign unrestricted roles to Super Users
Please help - How to validate whether Data Dependent Authorizations are Activated?
I am working with XI Developers and Basis Team and we did updated all the Required Exchange profile parameters.
Per this Document - User Authorizations in Integration Builder Tools - Do we need to update the server.lockauth.activation in Exchange Profile. When We updated, It removed Edit Access from all XI Developers in PI
In both the Integration Repository and the Integration Directory, you can define more detailed authorizations that restrict access to design and configuration objects.
In both tools, you define such authorizations by choosing Tools ® User Roles from the menu bar. The authorization for this menu option is provided by role SAP_XI_ADMINISTRATOR_J2EE. Of course, this role should only be granted to a very restricted number of administrators. To activate these more detailed authorizations, you must set exchange profile parameter com.sap.aii.ib.server.lockauth.activation to true.
The access authorizations themselves can be defined at the object-type level only (possibly restricted by a selection path), where you can specify each access action either individually as Create, Modify, or Delete for each object type, or as an overall access granting all three access actions.
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/frameset.htm
I was able to control display and maintain access from ABAP Roles, but completely failed to implement Integration Builder Security?
Are there any ways to check Whether Data Dependent authorization or J2EE Authorizations are activated?
Thanks a lot
Satish

Hello,
so to give you status of our issue.
We were able to export missing business component .
But we also exported some interfaces after that and we had some return code 8, due to objects still present in change list on quality system (seems after previous failed transports , the change list was not cleared completley...).
So now we have checked that no objects is present in the change list of quality system and we plan to export again our devs on quality system.
Hope after that no more return code 8 during imports and all devs transported correctly on quality system.
Also recommending to read that, which is pretty good.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7078566c-72e0-2e10-2b8a-e10fcf8e1a3d?overridelayout=t…
Thanks all,
S.N

How to configure Integration Builder using an Integration Process?

Dear experts,
I have problems configuring the Integration builder using a Integration process.
Scenario = idoc to PI, integration process transforms idoc to file, file to external system.
My integration process starts with an abstract interface (structure of idoc) and ends with an abstract interface (structure of file). But I just can not configure the integration builder correctly...
I did it as follows:
Sender agreement: comm.component = SAP system; interface = Idoc;
receiver determination: comm.component = SAP system; interface = Idoc; configured receiver = my integration process;
interface determination: comm.component = SAP system; interface = Idoc; receiver = target system comm.component;
Receiver agreement: comm.component = SAP system; receiver = target system comm.component; interface = filestructure of target
This does not work unfortunately. How can I pass the Idoc to my abstract interface? And how can I pass the result of my integration process (abstract interface) to the inbound interface? In the interface determination I can not select my Operation Mapping (but that should not be nessesary as I already created an Integration Process)...
Hope anyone can help.
Thanks and regards
William

Just consider your BPM is receiver, and sender:
Src --> BPM (BPM is Receiver)
==========
Sender Agreement (If it is IDOC or HTTP, then you do not have to create)
Commnunication Channel
Receiver Determination
Interface Determination
BPM --> Target (BPM is sender)
============
Receiver Determination
Interface Determination
Communication Channel
Receiver Agreement
If your BPM interact with other systems, you will have more Receiver Determination and Interface determination, possible Receiver agreement
Hope this clear your doubts
Liang

How to launch integration builder with IE proxy?

Hi,gurus:
Our XI server is in remote side, so we have to set the IE proxy while launching integration server.But as you know,the integration builder woud not be launched successfully with IE proxy.So how can we deal with it?
Any help will be appreciated!

Hi,
The error message is "unable to launch integration builder" ,which all of us might have ever met.
I think it is the cause of IE proxy,but we have to set the proxy to get the environment from remote XI server.
I have referenced note 800267,but it seems of no avail.
Any ideas?

Ap;plication help from ESR or Integration Builder

Hi,
We have PI7.1 installed and the Application Help is working from the ABAP side. However, the Application Help is disabled in Enterprise Services Builder and Integration Builder (java side). I have not found any documentation on how to enable the Application Help.
Can someone point me in the right direction on enabling the Application Help from the Java side (in the Integration Builder or Enterprise Services Builder)?
Any help is greatly appreciated.
Regards,
Rick

Hi Rick
See the SAP note #839880 'Documentation link on XI 3.0 Tools page'. Check the attached pdf document for steps necessary. The note is geared towards XI 3.0 but I think all the necessary steps are identical in PI 7.10.
Then enter whatever URL you wish. For example:
Online help search page:
http://help.sap.com/search/sap_trex.jsp
Online help url for 7.10:
http://help.sap.com/saphelp_nwpi71/helpdata/en/80/c76642804a173be10000000a155106/frameset.htm
Regards
Mark

[HELP] How to invoke BPEL from JAVA program via calling WSDL?

Dear all,
Customer want to invoke BPEL process in their Java program by calling BPEL WSDL, but not successfully.
Does BPEL support this calling way? If so, would pls give a sample?
BTW, they do not want to use API of OraBPEL.jar.
Thanks in advance.

Krishna, Not sure what you mean by 'normal' web service....I mean, is BPEL service not normal, is it not as per WS standards. It would be interesting if you could shed some light on that.
On the question of calling BPEL, I thought there were two methods - one is using the BPEL PM API, which uses the locator class to get hold of BPEL PM instance and then call a deployed bpel service
The other way is to develop a web service proxy using JDeveloper. Its a very simple process. Once you do that, you can call the proxy from Java.

Integration Builder configuration.

Dear All,
    I am new to XI as Basis Administrator. I need to configure Integration Builder for developers. All I have access is to SLD http://<hostname>/sld and SAP GUI.
      All I know is I need to install JRE with version > 1.4.* and configure web proxy to access XI server.
     My question is what will developers expect me to configure, and what will developer be doing with integration builder ? (tasks in broad terms)
      Do I need to perfrom any tasks on Visual administrator to make some settings ? what are minimum authorizations should I give to developer ?
      Any reasonable advice will be helpful get start configuring integration builder.
Thanks,
N

Hi,
>>My question is what will developers expect me to configure, and what will developer be doing with   integration builder ? (tasks in broad terms)
XI Developers needs Rights for
1 Usually the technical system configuration is carried out by basis or admin team
2 Integration builder - creating all design objects, configuration objects
3. You have to provide access for the developer to monitor in RWB
> Do I need to perfrom any tasks on Visual administrator to make some settings ? what are minimum authorizations should I give to developer ?
check this links of XI Authorizations
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Dialog Users role in XI:
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm
Service User Role in XI:
http://help.sap.com/saphelp_nw04/helpdata/en/9f/d12940cbf2195de10000000a1550b0/content.htm
Messaging Component & Role:
http://help.sap.com/saphelp_nw04/helpdata/en/d4/d12940cbf2195de10000000a1550b0/content.htm
regards
Ramesh P

How to enable ABAP Mapping Program in Integration Builder

i have changed ABAP mapping Program in my DEV. Now i want teransport it to INT server.
After releasing it in DEv, it should go through request number.
but to enable the same mapping in integration builder i think we need to some thing in ADMInistration of integration builder.
plz tell me what to do.
regards
sreeni

Hi kancham sreenivasulu ,
These web-sites may help u solving u'r problem:
How 2 connect non SAP RFC-Programs with XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0a8949b-098d-2910-2b8e-b5e9b7daeb26
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/6f1741b393f26fe10000000a1550b0/content.htm
http://help.sap.com/bp_bpmv130/Documentation/Planning/HighAvailability.pdf
http://www.erpgenie.com/netweaver/xi/XI%20Service%20Packs%20Described.doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/704357d9-ce6e-2910-f085-bb1a238b6330
cheers!
gyanaraj
*****Pls reward points if u find this useful

How to do configuration in Integration Builder for Idoc to PI to EDI system?

Hi Experts.
I am working on one interface which is SAP IDOC (DESADV.DELVRY03) >> to>> PI >> to>> EDI system.
I am done with all ESR objects,
Can anyone help me about how to and what configuration required to be done in Integration Builder?
And after configuration how should I test/check my interface?
Please give your suggestions.
Any suggestion will be rewarded.
Thanks in advance.
Regards,
Dipen.

Hi Dipen,
Configuration:
SAP ECC
You have to configure the Output types in NACE and Partner Profile in WE20 properly.
SAP PI
In PI, You have to configure the port in IDX1 and load the meta-data in IDX2.
Testing:
While on saving the Delivery document, IDoc would be triggered and it would be routed to PI based on the port that you have configured in the partner profile.
You can check the status of the IDoc in WE02/WE05. Check the tRFC queue in SM58 whether the IDoc is struck in ECC due to any communication issues.
In PI, you can check whether the IDoc is received or not in the transaction IDX5. If you double-click on the message, it would be routed to the message monitoring.
The status of the message in the receiver side can be checked in the communication channel monitoring.
You can let me know if you need any more info.
Thanks,
Kanda

How to Invoke Oracle report builder installed on a server from a client

Hi,
I am using rwrun60 command to invoke report builder through a shell script. In this case the report builder is installed on the same machine where the shell script exists.
But now i have shell script which is on different server (say, Server1) and Report builder is on Server-2. How do i handle this?
the current piece of code i am using in the shell script is:
rwrun60 module=${UNCPATH}/${REPORT_DIR}/purchase.rdf userid=$DBID/$DBPASS@$DB paramform=NO batch=YES destype=File desformat=pdf desname=${SENDFILE}
Your help will be invaluable...

Hi Denis,
I used both rwrun60 & rwcli60 commands as below:
rwrun60 module=${UNCPATH}/${REPORT_DIR}/abc.rdf userid=$DBID/$DBPASS@$DB EXPRESS_SERVER="server=Server123/domain=xyz/user=myname/password=password123" ERRFILE=${UNCPATH}/${DIR}/error_test.txt paramform=NO batch=YES destype=File desformat=pdf desname=${UNCPATH}/${SENDFILE}
rwcli60 module=${UNCPATH}/${REPORT_DIR}/abc.rdf userid=$DBID/$DBPASS@$DB EXPRESS_SERVER="server=Server123/domain=xyz/user=myname/password=password123" ERRFILE=${UNCPATH}/${DIR}/error_test.txt paramform=NO batch=YES destype=File desformat=pdf desname=${UNCPATH}/${SENDFILE}
When i run the shell script file on the command prompt, all i get is this error:
rwrun60: test_outapp 42: not found
42 is the line number of rwcli60 command in the shell script file.
I verified and test_outapp.ksh file is present in the path specified..... even then why this error?...something wrong with the above code?

How to Launch an Integration Builder under two different java versions

How to Launch an Integration Builder under two different java versions     1
1. Situation     2
2. How To Do     2
2.1 jre preparation     2
2.2 Put them into the system     2
2.3 Execute a Java Web Start under jre 1.4.x version     3
2.4 Change Java Runtime Versions     3
2.5 Launch an Integration Builder     6
1. Situation
OS: windows 2000 pro English
Java version: jdk 1.5.x was already installed. (Its not permitted to change.)
I dont have any authorization to install any software on the PC.
But I need to use an Integration Builder.
I already knew URLs of an Integration Builder (http://<hostname>:50000/rep/start/repository.jnlp).
2. How To Do
At this moment, an Integration Builder (XI 3.0) can be launch under jre 1.4.x environment (on windows).
2.1 jre preparation
I download j2re-1_4_2_10-windows-i586-p.exe from http://java.sun.com/j2se/1.4.2/download.html
I installed it on my home PC and copied all files from C:\Program Files\Java\ j2re1.4.2_10\ into my USB.
2.2 Put them into the system
I pasted j2re1.4.2_10 folder from my USB into the windows 2000 pro system.
Finally, I could list up all of javaws.exe under this system.
c:\j2re1.4.2_10\javaws\javaws.exe
c:\Program Files\Java\jdk1.5.0_05\bin\javaws.exe
c:\Program Files\Java\jdk1.5.0_05\jre\bin\javaws.exe
c:\Program Files\Java\jre1.5.0_05\bin\javaws.exe
2.3 Execute a Java Web Start under jre 1.4.x version
I executed c:\j2re1.4.2_10\javaws\javaws.exe .
2.4 Change Java Runtime Versions
Go to File-> Preferences -> Java
As you can see, it indicates 1.5 version.
Click [FIND] button.
Click [NEXT] button.
Click the j2re1.4.2_10 folder.
Click [NEXT] button.
A JRE Finder is able to find javaw.exe automatically. Or you can indicate C:\j2re1.4.2_10\bin\javaw.exe directly.
Click [NEXT] button.
Finally, there are two Java Runtime Versions. Now you need to uncheck the Enabled column of 1.5 version and check 1.4 version.
Click [OK] button.
Well, in the General tab, I selected None for Proxies.
2.5 Launch an Integration Builder
In the Location field, I typed the URL of an Integration Builder jnlp.
http://<hostname>:50000/rep/start/repository.jnlp
SAP Integration Builder comes up inside Applications area.
Select it and click [Start] button.
If you click Environment-> Integration Builder (Configuration), you can launch Integration Builder: Configuration.
[PDF file location] with screenshots
http://SDN.mobilian.org/SDN/How2LaunchIB.rar
===================Advertisement==========================
How do you search SDN?
What about [<b>SDN Search Widget</b>]?
SDN Search Widget
=========================================================

I am not getting anywhere with deploying my application or
applet.
I have set up my bc4j project. It contains all my VO info,
links, application module. (proj a)
I then have another project with DbInfo in it(has all my rowset
info), Multiple Frames, and my Applet.java file.
Actually I have an Applet.java file and a Application.java file
because I was seeing if both/either worked. Anyway they seem the
same, except for that extra window that comes up when you run the
applet.
I follow the steps in the oracle directions (from earlier post).
And all seems ok. But at ---->
[*] Select the subdirectory under myhtml where your applet's HTML
file
is located, and enter the directory path of the 'staging'
directory you
created in step 3 above, if different from the default.</li>
[*]Select the HTML files that JDeveloper created to run your
applet.</li>
[*]Select all of the Java source files in your project that make
up the
applet.</li>
I have no HTML file associated with my applet, at least that I
know of.
So do I need to create one, or should it of been done
automatically.
Also, I trying to figure out what will be the best way to deploy
my project. Applet or stand alone application is what my first
choices have been so far. I have read that there is some issues
with applets being served from a different server than the
database. So a stand alone application was my front runner, but
I haven't gotten either way to work yet.

Can't Launch Integration Builder, help me.

I downloaded Full ABAP Edition of SAP NetWeaver Sneak Preview and Trial, after install, I wanna develop XI-CONTENT, but cann't Launch Integration Builder, always open 'SapWorkDir' directory, but no error message showed, status bar print "starting browser...". And I did not using J2ee Server, only ABAP edition, of course J2SE 1.4.2.12 has been installed.
I do not known why , thanks for any help.
by the way I looked Syslog, there always a "Communications data: Service initialization failed" message each time I start NSP instance, but every things seems ok.

Hi,
Just adding on to what Michal said,
SDN has recently released 2 Sneak Preview products:
- SAP NetWeaver 04 SP15 Full Java Edition
- SAP NetWeaver 04s Full ABAP Edition (with Web Dynpro for ABAP)
But for XI we need both the Java and Abap stacks and not just having them individually, because of which you cannot use it for XI.That is, the Sneak Preview products contain either the JAVA or the ABAP stack but not both together.
The link below i guess will also help you learn more about the Sneak Preview products and get a clear idea on the same:
http://www.howforge.com/news/sneap-prevew-sap-netweaver-04-sp15-java-abap
And incase you had installed XI or PI has Michal suggested then probably the solution provided by Ben will be useful..
I hope this clears your doubt....
Regards,
Abhy

How to import stuff from SLD to Integration Builder ?

Hi All ,
I have done all my definition and configuration in SLD - Product definiton, Technical System, Business system, SWCV , SWC , logical system - everything is in SDL.
When I go to' IB:design' and 'IB:config' I don't see anything I created in SLD?
I guess this is because the very next step should be to import all this stuff from SLD into Integration Builder.?.I read some posts on the forum but it is not clear where this is done :
1.should I do it first in IB:design or in IB:configuration ?
Can you please tell me how this is done technically and in what order - from wich menu and how?
2.And what is Enviroment->Clear SLD Data Cache used ? Do I have to use it and at which point?
Looking forward to your reply asap..Thanks all in advance..
Regards,
Boby

Boby,
If you do all the configuration in SLD only thing you have to import is the software component into Design and create your namespace and all the objects.
In Configuration you have to import your business systems and do all the routing rules.
Check this weblogs for step by step procedure for an end to end scenario:
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-ii
<i>
2.And what is Enviroment->Clear SLD Data Cache used ? Do I have to use it and at which point?</i>
If you change anything in IR and ID and this new changes do not reflect in your scenario then we do this normally.
Also check this document for all the caches in XI:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
---Satish

How to configure the Integration Builder connection Parameters

Hi,
If I leave the integration builder for a while, then I explore objects, the pop up message is:
"Connection to server lost You can log on again once the server is available again Do you want to log on again?"
I input password, some times regain the connection, most time not, then if not, I have to restart integration builder. I would like to know where I can adjust parameters to allow connection kept longer.
Thanks
Liang

Hi, Swarup:
Thanks for your reply.
The reality here is that we could not get solid support from BSAIS team, we came to many situations that we have to search around and tell them how to do the job like this (They are all afraid of Java Stack
I will keep search, if you have detailed information how to and where to configure those parameters, please let me know.
Regards!
Liang

Can any body help me how to make the build.xml

Can any one tell me how to make the build.xml and want to deploy in the iplanet server. I am very new for that. I dont have any idea of build.xml. If any one have code in build.xml please tell me [email protected] Please if any one is having sample exaple please forward it to me. I am waiting for the quick reply. Please its very urgent mail me.

htpp://ant.apache.org
http://ant.apache.org/manual/using.html#example
Good Luck
Lee

Help - How to invoke Integration Builder

Similar Messages

Maybe you are looking for