HELP!! how to refresh button?

i use as3 to change image in graphic file, and my graphic file is used by a button, how do i refresh the button to let it shows new image?

what are you trying to do?

Similar Messages

In the latest version of Pages (5.0) I cannot find the refresh button to update a chart copied from Numbers (also latest version 3.0). Can anyone help?

In the latest version of Pages (5.0) I cannot find the refresh button to update a chart copied from Numbers (also latest version 3.0). I saved my Numbers document before copying to Pages. Can anyone help?

I think you identified my mistake. I confused tables-charts-graphs. I was wanting a "table" of cells (numbers) to be added to the Pages document. Is there no way to do that and keep the tables linked between Numbers09 and Pages09?
An example would be a Numbers spreadsheet calculating a number (say, a product price) and that number (data) be linked to a product information text in Pages.
I just recently saw the Merge function in Pages, but have not yet learned how that works. I don't use Pages much at all but it would come in handy for creating to information sheets about products --- with the product pricing being updated from a Numbers spreadsheet.
If you have any hints on how that can be done or where I can find info on that I would appreciate it.
Thanks for catching my misunderstanding.
Bill

I can't open a new tab when I right click the refresh button; same goes when I click on History and right click a past site. How do I fix it?

It happened after Mozilla Firefox's plugin crashed. Whenever I tried right clicking the refresh button or a page in History, it no longer prompted me to "open in a new page." Instead, the box showing the menu bar, navigation bar, etc. showed up. How do I change it back?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How to use the standrad Refresh button in ooalv Grid?

Hai Experts ,
i write editable oo alv program its works fine. when change the data
then click save button its saved correctly, but the problem is totals of row & column not refresh when i am click the
Refresh button . Please Help how to handle the standard Refresh button in ooalv .
Thanks
Adv....

thank q u for ur reply,
when i edit the data in grid and save the data its saved successful,
but the problem is manually i calculating the totals at the end of the Row as well as at end of the columns,
when i edit the data in Grid that totals are not effected for that im using the Standard Refresh button ,
Plz help me.

How to hide refresh button in crviewer?

Hi,
I want to hide refresh button when view the crystal report in webi, but don't know how to do that
Pls give me some advice,thanks~

Hi Julian,
I tried, but the fresh button is still there. Just when click this button,it says you have no right to refresh the report.
i guess if we want to hide the refresh button,we may edit the viewer.js in Crystal reports web application folder,but not sure and don't know how to do that, pls help me~

How to call a macro(check for unsaved data) before calling refresh button of EPM TAB

Hi,
I want to show a popup message for any unsaved data before USER hit the refresh button on EPM tab.
I write the macro like as below in module
Function TestForUnsavedChanges()
    If ActiveWorkbook.Saved = False Then
        If MsgBox("There is unsaved data, save the data otherwise u will loose the data. Do You Want to Save the Data ?", vbYesNo, "Warning") = vbYes Then
        bSave = True
        Else
        bSave = False
        Application.Undo
        End If
    End If
End Function
so how to execute this macro before Refresh ?
Thanking in Advance !!

Hi Nilesh,
Try to add this macro under Function BEFORE_REFRESH.
Hope this helps.
Regards,
Astha

Help! My email push isn't working even when I hit the refresh button!

Please help me. I got a Palm Pixi in December. It worked perfectly until about 2 weeks ago. It suddenly stopped pushing my email, including when I hit the refresh button! I spent many many hours on the phone with both verizon and palm, we tried starting and restarting the phone, removing and adding my accounts, we even tried a partial wipe of the phone. Nothing worked. So both verizon and palm assured me that my brand new phone must be defective, they sent me a new palm pixi promising me that my email push problems were a fluke and that it would never happen again. I got my new phone a week ago, it worked fine until yesterday- the same push problem is back! I've been on live chat with a palm technician for almost 2 hours now, we've set and reset my email settings, we've reset the account settings in the phone, and it still doesn't work!
Please somebody, tell me what the fix is for this!
I need this phone for my job.
Because this problem didn't start until the end of my 30 day trial period, I can't exchange this phone now, and I can't afford to pay retail price for a new phone so I'm stuck with this phone even though this problem is not my fault!! I have to make this work!
Verizon and Palm promised me that this problem would never happen again, that it was a one time fluke based on a defective(though brand new device)- based on this assurance, I exchanged phone and now I am stuck. I spent hours on the phone on monday with palm support updating/changing my email settings on the phone and when that didn't work he sent me the webos doctor instructions via email to try on my own. I did that last night, and guess what? It still didn't work! As per usual, the solution either doesn't work at all, or it works for a bout an hour and then stops working.
Help!
Thanks
Post relates to: Pixi Plus p121vzw (Verizon)

First verify that all your email settings are correct as they may have changed.
Service provider settings frequently change. If your email account was working but you are currently experiencing problems, check with your service provider to find out whether any of the account settings have changed. You may need to manually change some email settings on your device.
Next, update the PRL on the device by dialing *228 send and option 2.
If the problems persist, try doing a Master Reset on the device.
Master Reset
Tap and slide finger up on center gesture area
Slide screen to the left twice
Tap Device Info
Tap and slide screen up to show Reset Options
Tap Reset Options
Select from the following Options:
Restart - Will restart device
Shut down - Will power off device
Partial Erase - Warning: Erases applications you installed and all application settings and data. Does not erase personal files stored on the USB Drive.
Full Erase - Warning: Erases applications you installed and all application settings and data. Also erases personal files stored on the USB Drive.

How can I bring back the nice big refresh button?

The refresh button used to be a nice big one at the top left. Now it is a tiny one hidden near the search stuff on the right. I want the big one back.
And while we're at it, I'd like the home button to be bigger again, as well. How can I do that?

Firefox 4 uses a combined Stop/Reload/Go button that is positioned at the right end side of the location bar. 
During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button. 
If you type in the location bar then that button becomes a Go button. 
Middle-click the Reload button to duplicate the current tab to a new tab.
To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* Drag the Reload and Stop buttons to their previous position to the left of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.

HT4061 How do I refresh the Find My iPhone map now that they have "upgraded" the product? There is no longer a refresh button.

Until this week there was a button next to the device identification that allowed you to refresh the Find My iPhone map. That button is now gone and I cannot see a way to refresh the map without exiting and reentering Find My iPhone. Any help would be appreciated. Thank you.

You need to go to the part where you see your device on the map and then there is a little refresh button next to the name of your device on the map page.

I just updated firefox and now when i play online games ,my home button and my login in button does not work,also my refresh button is gone. Please help me with this problem. THANKS

i updated firefox to the newest version,now my login and home button does not work,also my refresh button dissapeared. I play alot of games and need those buttons to switch back and forth to other games. THANKS

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

How to add the REFRESH button in OOPs ALV grid

how to add the REFRESH button in OOPs ALV grid

Hi Naidu.
Check the below code:
Local Class Definition and implementation For events handeling
CLASS LCL_EVENT DEFINITION .
PUBLIC SECTION.
    METHODS :TOOLBAR FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID
                     IMPORTING E_OBJECT,
             USER_COMMAND FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
                     IMPORTING E_UCOMM.
ENDCLASS.
CLASS LCL_EVENT IMPLEMENTATION.
METHOD TOOLBAR.
    WA_TOOL-FUNCTION = 'ZFC1'.
    WA_TOOL-TEXT     = 'TEST'.
    WA_TOOL-ICON     = '@EA@'.
    APPEND WA_TOOL TO E_OBJECT->MT_TOOLBAR.
ENDMETHOD.             "DISPLAY
METHOD USER_COMMAND.
    IF E_UCOMM = 'ZFC1'.
          ENDIF.
ENDMETHOD.                    "USER_COMMAND
ENDCLASS.                    "LCL_EVENT IMPLEMENTATION
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'ZALV_BTON'.
SELECT * FROM VBAK INTO TABLE GT_VBAK
           UP TO 30 ROWS.
**** CREATE CONTAINER OBJECT
CREATE OBJECT MY_CONTAINER
    EXPORTING
      CONTAINER_NAME              = 'CC1'
     EXCEPTIONS
      CNTL_ERROR                  = 1
      CNTL_SYSTEM_ERROR           = 2
      CREATE_ERROR                = 3
      LIFETIME_ERROR              = 4
      LIFETIME_DYNPRO_DYNPRO_LINK = 5
      OTHERS                      = 6 .
****** GRID TO CONTAINER
CREATE OBJECT ALV
      EXPORTING
      I_PARENT          = MY_CONTAINER
     EXCEPTIONS
      ERROR_CNTL_CREATE = 1
      ERROR_CNTL_INIT   = 2
      ERROR_CNTL_LINK   = 3
      ERROR_DP_CREATE   = 4
      OTHERS            = 5.
CREATE OBJECT OBJ.
SET HANDLER : OBJ->TOOLBAR FOR ALV.
SET HANDLER : OBJ->USER_COMMAND FOR ALV.
****** ALV DISPLAY
CALL METHOD ALV->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
      I_STRUCTURE_NAME              = 'VBAK'
    CHANGING
      IT_OUTTAB                     = GT_VBAK[]
    EXCEPTIONS
      INVALID_PARAMETER_COMBINATION = 1
      PROGRAM_ERROR                 = 2
      TOO_MANY_LINES                = 3
      OTHERS                        = 4.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
*       text
MODULE USER_COMMAND_0200 INPUT.
IF SY-UCOMM EQ 'BACK'.
    LEAVE PROGRAM.
ENDIF.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
Regards
Kumar M

How to add Refresh button

Hello...
This is my code. How to add REFRESH button in this code
package sample.view;
import javax.faces.event.ActionEvent;
public class Student {
    public Student() {
        super();
    private String name;
    private String id;
    private String course;
    public void setName(String name) {
        this.name = name;
    public String getName() {
        return name;
    public void setId(String id) {
        this.id = id;
    public String getId() {
        return id;
    public void setCourse(String course) {
        this.course = course;
    public String getCourse() {
        return course;
    public void dosubmittoActionisterner() {
        // Add event code here...
        System.out.println(getName() + " " + getId() + " " + getCourse());
    public void dorefershActionlistener(ActionEvent actionEvent) {
        // Add event code here...

Hi,
is this a home work you are working on? Even as a student you should be able to express questions more clearly.
Frank

Data getting posted on refreshing IE's refresh button..how to stop

Hi ,
we have beent rying to resolve this issue. the problem is when we click on submit button data getting posted on to mobile devices and in the next page "message has been sent " text will come.but if refresh button is clicked again data getting posted to mobile devices.Navigation is like this as below specified.
1. Login---submit(html file)
2. jsp page1 with three fields (sender name, mobile numbers, msg box), submit button. on clicking submit calling one java program for sending msgs another jsp page for displaying req is successfull or not.
3. jsp page 2 displaying "Your message has been sent". Here our problem arises. if the user sends msg for say 10 numbers msg will go and he will come to jsp page2. but if he clicks refresh button on browser/F5 data is getting posted again to the same numbers. so wastage of 10 credits. if it is 100 numbers data will be posted again for the second time to 100 numbers on clicking refresh. which is not at all acceptable by the customer. so the data should not get posted on clicking refresh.
so please help me in resolving this issue ... its a priority task. it would be great help for me and i would be thankful to all who ever contributing ur valuble suggestions if possible with code.

Any browser will resend post data on refresh. Maybe store old data for one session then ignore it if its the same as next submition?

My Back and Refresh buttons are not registering/working, how do I fix it?

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/813027]''
On about 80% of the pages I am on, my back button and my refresh button will not work. The back button will not recognize that I have been to previous pages in the same tab, and my refresh button will just do nothing (the shortcut keys 'backspace' and 'f5' also do nothing). Some pages, like this one, work fine, but most others do not.
I can't think of what it is that is causing it.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
See:
* [[Troubleshooting extensions and themes]]
This can also be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

I lost my HOME and REFRESH buttons and don't know why. Since I can't have them anymore please tell me in detail how I get rid of Mozilla Foxfire and let me know what all I'm going to lose in the process. Thanks, Neil

I have used Mozilla Firefox for almost a year and it was good. Now I make on stupid mistake by upgrading to the new version and I lose my Home button, Refresh button and I don't know how many other buttons.
Since I can't have WHAT I USED TO HAVE please explain in detail how I rid of Mozilla Firefox and what I'm all going to lose in the process.

The home icon by default has moved to the right hand side of the navigation toolbar.
In Firefox 4 by default the Stop, Go and Reload (Refresh) buttons are combined and attached to the right hand edge of the location bar.
When you are typing in the location bar it will show the Go button. When a site is loading it shows the Stop button. At other times it shows the Reload button.
If you want separate buttons stop/go/reload buttons, or want to move the home button, right-click on a toolbar and choose Customize, you can then drag and drop the buttons and place them elsewhere. If you place them in the order "Reload-Stop" on the right hand edge of the location bar they will be combined again. For more details on customizing the toolbar see https://support.mozilla.com/kb/How+to+customize+the+toolbar

HELP!! how to refresh button?

Similar Messages

Maybe you are looking for