Help: how to set the permission for filesystem folder

I have been created a Windows FileSystem repository. and I can access it when I am Administrator. but I can not access it using another user. How can I make these user can access that folder?
thanks, best regards
George

You need to do the user mapping of the user to their windows id and password. Make sure it is in the format DOMAIN/username. Your administrator can see them because they are a special user called a system principle.
Paul

Similar Messages

How to set the permission of RMAN in Linux?

I have installed oracle XE in Centos, however, when I try to access to RMAN by
rman target /
it shows the error message
[root@localhost bin]# rman target /
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Oct 11 17:50:34 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ================================================
RMAN-00569: ========== ERROR MESSAGE STACK FOLLOWS ========
RMAN-00571: ================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-09925: Unable to create audit trail file
Linux Error: 13: Permission denied
Additional information: 9925
ORA-01031: insufficient privileges
I would like to ask how to set the permission for root to use rman ?
Thank you very much ~!!

Check first if the directory where you save the auditing information is owned by oracle:dba.
Regards
Aron

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder
Regards,
John

Hi,
Please try to setting Folder Permissions on Web Publish, and then deploy it with Web Deploy, as far as I know, if we do that, Web Deploy will use the SetAcl operation to change permissions. Please have a look at the article below.
#http://sedodream.com/2011/11/08/settingfolderpermissionsonwebpublish.aspx
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to control the permission for reports in share folder?

Hi Experts,
In OBIEE 11.1.1.6.0.
I have created two folders in share folder,one is sales folder which contains some sales reports,and the other is dashboard folder which contains some dashboard pages that have these sales reports.
So I want to new users who do not access the sales folder, but can view the sales reports in dashboard pages.
How to control the permission for reports in share folder? Thanks for your help.
Note: Dashboard pages have whole sales reports for showing.

Hi User,
1. Give access to the users for all reports.
2. Give No Access to Retail Folder
3. GIve read or full access to dashboard folder.
To set the permission , click on the object/folder bottom left you will find Permission. you set there.
Mark if correct,
fiaz

How to enable root on mac on 10.9.2 and how to set the password for the same ?

how to enable root on mac on 10.9.2 and how to set the password for the same ?

http://support.apple.com/kb/ht1528
Follow the steps for Lion.
But, why are you doing this? I've never found the need to do that.

How to set userlevel permission for GFS and NFS

hi
how to set userlevel permission for GFS and NFS?
regards

hi
http://www.redhat.com/docs/manuals/enterprise/
AND
http://en.tldp.org/
probably your best bet.
regards

How to set the size for height of iView tray?

Hi,
I have created a ABAP webdynpro component and integrated this comp with iView. Then i integrated iView into Page in portal. That is working fine.
But the size of tray/window which is displayed in the page is very small.
How to increase the height of that Tray/window/iView containing my component?

Hi,
By changing the maximum automatic height and Minimum automatic height property of the iview you can set the size for height of your iview.
to do this follow the setps:
goto content administrator -> portal content -> your folder where you created your iview or directly to your iview -> right click -> open -> object,
and now in property category choose appearance-Size from the drop down menu and set the above properties to your required height.
if you want the end user to modify this property set the property to read/write .
*********please reward points if the information is helpful to you********************

How to set the status for a customer plan to RELEASED.

Hello all,
I created a program for mass creation of customer plans. But after the creation of a plan, the status should be set to released, so that the user can go about creating the trade promotions for the customer plan. Can anybody tell me how to set the status of a customer plan to RELEASED.
Thanks,
Disha.

Hi Clemens,
I am not talking about doing it in the CRM_UI transaction..I created a program..which would create the customer plans based on the planning account data provided. I was succesfull in creating the plans, but I am not knowing how to release it, if only anybody can tell me about a Function module or method, which can help me do this, that would be great
Thanks,
Disha.

How to set the #HELPLINK# for a page

I tried to find, how or where can I set the #HELPLINK# for each individual page/application component?

Click on --
Edit link for Page> Click "Edit Default" link on Banner >
Under the "Banner Links"
provide value something like this:
Label = Help
URL = /pls/portal30/docs/myhelp.html
Icon = U can upload any icon here.
For Application Components = See the Second Last tab on "Edit Component".
Thanx,
Chetan.

How to set the background for all components?

hi
Does anybody know how to set the DEFAULT background color in an application.. I need it because in jdk 1.3 the default bgcolor is grey and in 1.5 it is white.. and I wish white as well.. so to make it also white in jdk 1.3 I need to use the (a bit annoying) anyContainer.setBackground( Color.white ); and these are lots in my app.. So my question is: is there such an overall class with a function (say UIManager.setComponentsBackground( Color color ) ) for such a purpose?
any tip or link would be greatly appreciated

Does anybody know how to set the DEFAULT background color in an applicationthis might get you close
import java.awt.*;
import javax.swing.*;
import java.util.Enumeration;
class ApplicationColor extends JFrame
public ApplicationColor()
    setApplicationColor(Color.RED);
    setLocation(400,300);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JPanel jp = new JPanel(new BorderLayout());
    jp.add(new JTextField("I'm a textfield"),BorderLayout.NORTH);
    jp.add(new JComboBox(new String[]{"abc","123"}),BorderLayout.CENTER);
    jp.add(new JButton("I'm a button"),BorderLayout.SOUTH);
    getContentPane().add(jp);
    pack();
public void setApplicationColor(Color color)
    Enumeration enum = UIManager.getDefaults().keys();
    while(enum.hasMoreElements())
      Object key = enum.nextElement();
      Object value = UIManager.get(key);
      if (value instanceof Color)
        if(((String)key).indexOf("background") > -1)
          UIManager.put(key, color);
public static void main(String[] args){new ApplicationColor().setVisible(true);}
}

How to set the conditions for item deletion approval workflow?

Hi,
I have created approval workflow for item modifications ie, when user try to modify an item, it will send a mail to Project Manager. For that I set the conditions in Change the behavior of the overall task: 1. When the task process starts 2 . When the task
process completes .
Change the behavior of the single task: 1.when a task is Pending.
[I followed this https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx ]
My Requirement is that I want to set this same workflow for the scenario: when the user deletes an item it will send a mail (intimation mail for item deletion) to Project Manager. here i dont want to send modification mails when user deletes an item.
When user modifies an item: 1. intimation mail, 2. Approve/Reject mail 3. intimation for approval / rejection mail.
When user deletes an item: 1. intimation mail.
How can we set it in one approval workflow?? where i have to set the condition for sending either item modification mails or deletion mail.
Thanks,
Praveen ji

Hi,
According to your post, my understanding is that you wanted to start approval workflow when item deleted.
You should first make some changes to trigger the workflow when you delete the item.
You can use the Event Receiver to achieve it.
In order to trigger workflow on item delete you need to create event receivers and from event receiver call the workflow already attached with list.
http://ravendra.wordpress.com/sharepoint-workflow-on-list-item-delete/
You can also create custom action to start the workflow, you can refer to the following article, then modify the workflow as your need.
http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=50
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to set the icon for the entire application with JFrame.setIconImage

I set the icon on the main frame using JFrame.setIconImage(). The icon is shown properly in the main frame.
If more JFrames are opened from the main frame, the newly opened JFrames also show the icon.
However if JDialogs are opended, in some cases the icon set on the main frame is shown and in other cases the coffee cup.
What is JFrame.setIconImage() expected to do? Setting the icon for a single JFrame or the entire application?
How can I set the icon for the entire application?
How can I set the icon for JDialogs?
Thank you

In order for your dialogs to use the same icon as the frame, you must parent the dialogs to the frame which has the custom icon.
See the following thread for more information: http://forum.java.sun.com/thread.jsp?forum=57&thread=362542
cheers,
Greg

How to set the header for second page

Hello all,
I'm trying to set different header for first page and page number should starts from second page.
Below is the sample code to set the header for each and every page.
DECLARE
hApplication OLE2.OBJ_TYPE;
hWindow OLE2.OBJ_TYPE;
hPane OLE2.OBJ_TYPE;
hView OLE2.OBJ_TYPE;
hDocuments OLE2.OBJ_TYPE;
hDocument OLE2.OBJ_TYPE;
hSelection OLE2.OBJ_TYPE;
hParagraphFormat OLE2.OBJ_TYPE;
hRange OLE2.OBJ_TYPE;
hFields OLE2.OBJ_TYPE;
hFont OLE2.OBJ_TYPE;
args OLE2.LIST_TYPE;
wdAlignParagraphLeft CONSTANT number(3) := 0;
wdAlignParagraphCenter CONSTANT number(3) := 1;
wdAlignParagraphRight CONSTANT number(3) := 2;
wdSeekCurrentPageHeader CONSTANT number(3) := 9;
wdSeekCurrentPageFooter CONSTANT number(3) := 10;
wdSeekMainDocument CONSTANT number(3) := 0;
wdFieldPage CONSTANT number(3) := 33;
wdFieldNumPages CONSTANT number(3) := 26;
wdPageBreak CONSTANT number(3) := 7;
wdStory CONSTANT number(3) := 6;
myTab CONSTANT varchar2(1) := chr(9);
myBlue CONSTANT number(8) := 16711680; --FF0000
myGreen CONSTANT number(8) := 65280; --00FF00
myRed CONSTANT number(8) := 255; --0000FF
myDkGreen CONSTANT number(8) := 32768; --008000
myBlack CONSTANT number(8) := 0; --000000
myText varchar2(2000);
BEGIN
hApplication:=OLE2.CREATE_OBJ('Word.Application');
OLE2.SET_PROPERTY(hApplication, 'Visible', 1);
hDocuments := OLE2.GET_OBJ_PROPERTY(hApplication, 'Documents');
hDocument := OLE2.INVOKE_OBJ(hDocuments, 'Add');
-------- Create Header and Footer --------
hWindow := OLE2.GET_OBJ_PROPERTY(hApplication, 'ActiveWindow');
hPane := OLE2.GET_OBJ_PROPERTY(hWindow, 'ActivePane' );
hView := OLE2.GET_OBJ_PROPERTY(hPane, 'View' );
---- Header Section ---
OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekCurrentPageHeader);
hSelection := OLE2.GET_OBJ_PROPERTY(hApplication, 'Selection');
hFont := OLE2.GET_OBJ_PROPERTY(hSelection, 'Font');
OLE2.SET_PROPERTY(hFont, 'Name', 'Times New Roman');
OLE2.SET_PROPERTY(hFont, 'Size', 10);
OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
OLE2.SET_PROPERTY(hFont, 'Color', MyBlue );
hParagraphFormat := OLE2.GET_OBJ_PROPERTY(hSelection, 'ParagraphFormat');
OLE2.SET_PROPERTY(hParagraphFormat, 'Alignment', wdAlignParagraphCenter);
OLE2.RELEASE_OBJ(hParagraphFormat);
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'This is a');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.INVOKE(hSelection, 'TypeParagraph');
OLE2.SET_PROPERTY(hFont, 'Size', 16);
OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
OLE2.SET_PROPERTY(hFont, 'Color', MyDkGreen );
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'Test Header');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
---- Footer Section ----
OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekCurrentPageFooter);
hParagraphFormat := OLE2.GET_OBJ_PROPERTY(hSelection, 'ParagraphFormat');
OLE2.SET_PROPERTY(hParagraphFormat, 'Alignment', wdAlignParagraphCenter);
OLE2.RELEASE_OBJ(hParagraphFormat);
hFields := OLE2.GET_OBJ_PROPERTY(hSelection, 'Fields');
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'Page ');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
hRange := OLE2.GET_OBJ_PROPERTY(hSelection, 'Range');
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG_OBJ(args, hRange);
OLE2.ADD_ARG(args, wdFieldPage);
OLE2.INVOKE(hFields, 'Add', args );
OLE2.DESTROY_ARGLIST(args);
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, ' of ');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
hRange := OLE2.GET_OBJ_PROPERTY(hSelection, 'Range');
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG_OBJ(args, hRange);
OLE2.ADD_ARG(args, wdFieldNumPages);
OLE2.INVOKE(hFields, 'Add', args );
OLE2.DESTROY_ARGLIST(args);
OLE2.RELEASE_OBJ(hRange);
OLE2.RELEASE_OBJ(hFields);
OLE2.SET_PROPERTY(hView, 'SeekView', wdSeekMainDocument);
OLE2.RELEASE_OBJ(hView);
OLE2.RELEASE_OBJ(hPane);
OLE2.RELEASE_OBJ(hWindow);
-------- Insert Text --------
hFont := OLE2.GET_OBJ_PROPERTY(hSelection, 'Font');
OLE2.SET_PROPERTY(hFont, 'Name', 'Arial');
OLE2.SET_PROPERTY(hFont, 'Size', 12);
OLE2.SET_PROPERTY(hFont, 'Bold', FALSE );
OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
OLE2.INVOKE(hSelection, 'TypeParagraph');
myText := myTab || 'This text is on the ';
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, myText);
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
OLE2.SET_PROPERTY(hFont, 'Color', myRed);
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'first ');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'page.');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, wdPageBreak);
OLE2.INVOKE(hSelection, 'InsertBreak', args);
OLE2.DESTROY_ARGLIST(args);
----page 2
myText := myTab || 'This text is on the ';
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, myText );
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.SET_PROPERTY(hFont, 'Bold', TRUE);
OLE2.SET_PROPERTY(hFont, 'Color', myBlue);
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'second ');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.SET_PROPERTY(hFont, 'Bold', FALSE);
OLE2.SET_PROPERTY(hFont, 'Color', myBlack );
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, 'page.');
OLE2.INVOKE(hSelection, 'TypeText', args);
OLE2.DESTROY_ARGLIST(args);
---- go to the top of the first page
args := OLE2.CREATE_ARGLIST;
OLE2.ADD_ARG(args, wdStory);
OLE2.INVOKE(hSelection, 'HomeKey', args);
OLE2.DESTROY_ARGLIST(args);
OLE2.RELEASE_OBJ(hFont);
OLE2.RELEASE_OBJ(hSelection);
OLE2.RELEASE_OBJ(hDocument);
OLE2.RELEASE_OBJ(hDocuments);
OLE2.RELEASE_OBJ(hApplication);
END;
Please help me out
Thanks,
Bhavana

Click on --
Edit link for Page> Click "Edit Default" link on Banner >
Under the "Banner Links"
provide value something like this:
Label = Help
URL = /pls/portal30/docs/myhelp.html
Icon = U can upload any icon here.
For Application Components = See the Second Last tab on "Edit Component".
Thanx,
Chetan.

How to set the width for a selectManyShuttle component

Hi,
I'm using selectManyShuttle component from Oracle ADF Core and some of the items in the showing list are long, therefore the width of selectManyShuttle expands the page. How to set the width property for selectManyShuttle component? After that does selectManyShuttle provide horizontal scrollbar as well?
Thanks in advance,
lapi
Message was edited by:
[email protected]
Message was edited by:
[email protected]

Solution here:
Re: ADF Faces Scrollable Panel or Scroll Bar inside a component
Regards
Grant

How 2 Set the logic for report 2 run 1st of everymonth......

Hi Experts,
i ve developd a HR-ABAP report in that Some part of code will Mon-Fri, Excluding Public holidays and sat & sundays...( i.e no public holidays and no sat & sundays)
and some part of should Run on 1st of everymonth.... but 2 parts of code should be in same report..
How can set the logic to run the report respective times....
Thanks in Advance....
sudeer.

you can code this but need some good expertise on fm's , date handling techniques and subroutine call coding.
1.
to make the code run only on 1st of every month
capture the rundate of ur prog .. take value of sy-datum
ex.. 01.xx.yyyy
or date std will be yyyymmdd so check for dd = 01 ..
so per logic first two chars show that its first of any month in any year ..
if yes
execute the logic for the first of every month ..
endif.
2.
where the code needs to be run on mon-fri and not on public holidays / sun / sat ..
first fetch the day based on date .. like mon or tue or wed .. except sat and sun..
second check whether if m-t-w-th-fr if any of them is a holiday or not
u need to check the date in the calender list like tholi thoc and .. to check whether that is a holiday or not ..
coming to sat and sundays .. u need to check the day for date using function modules and build the logic ...
br,
vijay..

Help: how to set the permission for filesystem folder

Similar Messages

Maybe you are looking for