HELP...HP Mini 110 Won't Boot Windows !?!?

Hey Everyone,
Please read in full and thanks for taking the time to read my problem.
I have a HP Mini 110 - 1100 running on Windows XP. Recently while using my computer, it started to get slow and eventually freeze. Even though I tried to shut down properly, I couldn't and was forced to reset by holding the power button. I've had to do that very few times in the past and usually everything ends up okay. But not this time ! The computer loaded and came to a black screen where the choices of (Safe Mode, Safe Mode w. Networking & Command Prompt, Last Known Configuration and Start Windows Normally) were displayed. I tried Last Known Configuration but as the OS was loading, the Windows XP screen froze, the BSOD (Blue Screen) quickly flashed, and the computer automatically rebooted. This resulted in a reboot loop that was never ending.
STEPS IVE TAKEN:
1. I tried to enter Windows through all the aforementioned choices.
2. I pressed F10 to enter the BIOS in which I restored all default settings.
3. Attempted to do a hard reset & nothing happened..may have done it wrong...but I tried several times.
4. Pressed F8 (holding down & pressing repeatedly) to get to the "Windows Advanced Options Menu: (http://devilsworkshop.org/files/2009/06/68224pick-last-known-good.gif)" but the Boot Manger came up instead:
Here, it asks me to choose an OS which is Win XP, and when chosen loop begins again.
From here, I pressed F6 accidentally which took me to the Roxio BackonTrack recovery. I restored with last available saved settings (Apr 26).
5. I took a Hard Disk Test in the BIOS which showed positive results...right?:
Passed - Restart the system (10000)
SOME OBSERVATIONS:
1. I enabled Instant Web so I can at least use something and it works. I'm actually using it now to post this.
I am able to establish a wireless connection.
I can view/listen to pictures/music that I have on my computer. Yet, I am unable to retrieve it for backup.
Instant Web recognizes my USB/SD connections.
Instant Web is syncing time with Main OS...does this show OS is still in working order?
THINGS TO POINT OUT:
1. Because the blue screen comes and goes so quickly, I am unable to aquire any error messages.
2. I did have Anti-Virus installed which scans for viruses everyday and nothing ever came up as a virus.
3. Everything was working perfectly right before this situation occured.
4. There is no CD Drive built in nor do I own an external harddrive.
As you can tell, I've tried various methods, but nothing seems to solve this.
Overall, my computer seems to be in a healthy state with working parts so I am confused on why the computer won't boot past the windows xp screen !
What could be the issue casuing this?
What steps can I take to solve this?
What is the proper way to get to the Windows Advanced Options Menu on a Hp 110?
Is something corrupt...What are HP 110's recovery options?
If you need any more specific information about my issue, just let me know!
I appreciate you all for reading this and please help assist me & contribute in any way that you can.
Thank You!

I'm going with simple corruption of the hard drive boot files. A chkdsk C: /r will likely fix it. If you can get into safe mode command prompt you can run that command from the prompt and it should scan the hard drive and repair any file system errors. You apparently have no mechanical problem with the hard drive (i.e. bad sectors).
if you cannot get into Windows via safe mode (it looks like maybe you have tried that)....you may need to get a copy of somethign like Hiren's boot CD:
http://www.hiren.info/pages/bootcd
Or any kind of a Windows preboot environment CD or memory stick to boot the computer and run chkdsk c: /r from the command line.
http://www.nu2.nu/pebuilder/

Similar Messages

Compaq Mini 110 won't start after cleaning Think Point virus

Hi
I'm helping my daughter with the following problem with her Compaq mini 110.
After removing the Think Point virus according to advice in different places the mini 110 don't boot after power on. The choice of pressing F10 (BIOS setup) and F9 (boot order) appears. If I don't touch any key at startup it starts accessing the hard disk for a few seconds, according to the hard disk LED and hard disk sound. Then it stops the boot procedure. Somewhere on the HP web site I read that pressing F11 repeatedly during boot would give the opportunity to choose operatings system recovery from the recovery partition. It doesn't respond to F11. Setting boot device priority doesn't seem to be a solution, since there is only one choice, so I can't force it into the recovery. I would appreciate any advice how to proceed. Below I add som additional facts.
Some threads on the forum mentions pressing F6 for recovery funktions, but it doesn't respond. There also ought to be some function on F12, but I can't figure out what. Doesn't respond anyway. Any explanation for F6 or F12?
Thanks,
Per
FACTS:
Computer model: Compaq Mini 110c-1100SO
OS is Windows XP as supplied with the computer and was never changed.
Hard disc diagnostics in BIOS setup performed without error reports (160 GB, disc type suggests Seagate hard disc)
RAM diagnostics in BIOS setup performed without error reports (1 GB)
Pressing F9 at startup gives no choices apart from the hard disk, no choice for partitions or USB boot.
I have set the delay for the user to press F10 to 5 seconds.
The display/screen works properly during BIOS setup
Power adaptor connected, and charging LED lights constantly (as I expect it to do)
Power on LED lights constantly
Wireless network LED lights constantly
Caps lock LED flashes briefly at start up, then gets dark.
When booting stops, background light on display is on, no text or symbols are shown at this state.
BIOS password has never been activated
BIOS Administrator Password has never been activated
Internal Network Adapter Boot never enabled

Hi,
On the link below is a brief guide ( and the download ) to create a bootable Antivirus disk. Create this disk on another PC and when done, start the infected PC so that you can open the DVD drive, insert the Antivirus CD you've created and then restart the infected PC to initiate the process.
http://www.techmixer.com/kaspersky-rescue-disk-load-kaspersky-antivirus-2009-using-dos/
Let me know how you get on.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Mini 2009 won't boot but will boot holding option key...

My mini early 2009 with OS X 10.8.2, won't boot normally, it will show a black screen after a while then will appear in large letters this:
No bootable device -- insert boot disk and press any key.
So, I unplug the power cord and wait a minute and re-plug it, then I press the start button while holding the "option " key down until the screen becomes grey and there I have the choice to start with the Macintosh HD or the Macintosh Recovery 10.8.2. So I choose Macintosh HD and it boots fine.
After the above, everything is fine. I used Disk Utility to repair permissions and everything was OK then I clicked on repair disk and again everything is ok.
But the problem is still there each time I start the computer.
It started after I opened Boot Camp Assistant to check my Windows XP partition which the icon disappeared from my desktop.
What are my possibilities? Thanks in advance.

Hi RRFS,
as you mentioned: In System Preferences under Startup Disk do you have your Mac HD selected? Did you lock it in (bottom left the little lock)?
The lock was open on the lower left. Using Disk Utilities, after a few Repair Disk Permissions and Repair Disk and downloading the Mac OOS X 10.8.2 Combo update and the 10.8.2 Supplemental Update, then again Verify Disk Permissions and Verify Disk, everything was OK.
So I started again the computer normally, but it took a longer time to boot, then my Desktop came back normally.
So, the problem has finally been solved for now. Now, it's the latest 10.8.3 update.
Thanks for trying to help with a question.

UEFI-only Won't Boot Windows Installation DVD

As you can see from my topic subject, my W520 laptop won't boot from my Windows 7 Installation DVD when it is set to UEFI-only mode. I don't get any errors or anything, the screen just goes black for a second and returns to the Boot Menu, when I select the DVD drive. For what it's worth, my hard drive is already GPT partitioned, and I need to repair the installation.
Before I ask for help, I just want to mention that I created this particular Windows 7 Installation DVD using the All-in-One tutorial so that I could have 32-bit and 64-bit options all on the same disc. The disc booted fine in "Legacy/UEFI" boot mode, so I'm not sure what the problem is. Does anyone have insight into this?
EDIT: I've been following this tutorial: http://www.insanelymac.com/forum/index.php?showtopic=186440 and am at Step 14.
ThinkPads and SSDs: Part 1 Part 2 Part 3
Solved!
Go to Solution.

The UEFI/BIOS is the first thing I updated on the computer, so mine's 1.22. I wish it were that easy, though Could 1.22 have re-introduced the problem?
EDIT: Holy smokes! There's another version of the UEFI-BIOS already Unfortunately, my hard drive is stuck in limbo! It's now partitioned in GPT and needs to be repaired. I'll use the bootable BIOS cd and report back if the new version works
ThinkPads and SSDs: Part 1 Part 2 Part 3

Bootpicker Won't Boot Windows on MacBook Pro

+We use bootpicker on iMacs, MacBooks, Minis and haven't had any problems until now. Suddenly the late 2008 MacBook Pro won't boot into Windows from bootpicker.+
+It's exactly the same problem described in this archived post that I've quoted below. Same log message as well.+
+Anyone found a solution for this?+
*Bootpicker doesn't reboot automatically on Windows selection*
Posted: Oct 17, 2008 3:00 PM
Hi all! Yesterday I installed Bootpicker (2.1.2) which now is provided by Apple (http://www.apple.com/education/it/bootpicker/) to select between Mac OS X 10.5 and Windows (Boot Camp).
It works fine except following: The Bootpicker menu is displayed after loading Mac OS X directly before Mac OS's login dialog. When I pick Mac OS the Mac OS login dialog is displayed - fine. When I select Windows, also the Mac OS login dialog is displayed. I had expected that in this case Bootpicker will automatically reboot the machine to start up from the Windows partition. Instead I have to manually select the reboot button in the login dialog.
I think there is something wrong. The /Library/Logs/bp.log says following:
17:55:43 BootPicker: Initiating.
17:55:44 BootPicker: Configuring interface for Windows volume/device: /dev/disk0s3
17:55:46 BootPicker: User chose Windows.
17:55:46 BootPicker: Bless args: (
"--device",
"/dev/disk0s3",
"--setBoot",
"--legacy",
"--nextonly"
17:55:47 BootPicker: Flagging slice 3
fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
Enter 'help' for information
fdisk: 1> Partition 3 marked active.
fdisk:*1> Device could not be accessed exclusively.
A reboot will be needed for changes to take effect. OK? [n] Writing MBR at offset 0.
fdisk: 1> 17:55:47 BootPicker: Terminating.
May be the unsuccessful configuration of the MBR causes the failure? Any other experiences or suggestions?

I think that the issue might be that there is no boot0 in /usr/standalone/i386. I have had similar issues lately when trying to make a bootable usb memory. I think this is necessary for the legacy option in the bless utility. If some one have a solution for this I would like to know as well.

Windows HP laptop won't boot Windows - possible hard disk failure!

Hi there!
A month ago my HP Pavilion dv6-6b57sa completely froze mid-use, and was unable to move the mouse or get any sort of response.
Naturally I held the power button to hard shutdown and restarted. Ever since then I have been unable to boot Windows 7 (the original OS) properly, and all I could get to was a Startup repair which took days to try to fix the issues, eventually coming up with a message saying it was unable to fix the errors.
Today I decided to ditch the data I had stored and do a fresh install - using the HP wizard by pressing F11 on boot and using a newly created USB Windows 7 install drive. After getting to the point of install process of Windows just loading the files, after choosing a hard drive partition successfully etc. the installation quit, citing a number of issues (screenshots link are below).
So I then try to restart the computer, and get a 'SMART Hard disk error' (screenshot link below) and when I select continue startup from there, it says Windows failed to start (screenshot link below) and then leads to me to the Startup repair manager again - which fails again - (screenshot link also below!)
So after doing a hard drive test, it says it has failed (screenshot link also below).
So what can I do? Is there a serious hardware related issue linked with the hard drive (which is bound to cost lots of £££ I bet), or are there further steps I can take?
Screenshot links: http://1drv.ms/1jnjviU
Many thanks for your help in advance,
Max

Yes and you had to at the moment since you won't have a key unless you buy one from Microsoft for about 99 dollars.
Try you best to get the key readble I mean try to read it, good luck!
Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
**Click the White thumb if you like the answer.**
**Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

Need Help with iMac 350 - Won't boot - keyboard or mouse not working!

Hello,
I've scoured the web looking for answers, and can't find any, so maybe someone here would be kind enough to help. I'm working on an imac 350 blueberry for my sister and I'm having all sorts of trouble.
She bought it last week, it started up (8.6 os) no problem. Powered up and down a few times, then all of a sudden, it won't boot. I'm currently getting blinking folder/happymac/question mark when trying to start up.
Here's the big problem - the keyboard and mouse do not work now. I've tried three different mice and three keyboards and no dice with any of them. I have the 8.6 CD from her previous imac (bondi), and I can hear it spinning, but there is no way to start up from cd.
I've also tried 2 other hard drives with the same results.
Tried resetting CUDA on logic board, taking out battery, no change. Bought new battery- no change.
I would love to at least get the keyboard working to see if I can even startup from cd, anyone have any clues on how to get it working? The strange thing is that the keyboard has a power on button, and it works to start the thing up, but dies when it tries to boot. Sometimes I just get a grey screen with the pointer icon, and I can move the pointer with the mouse for a second or two, then no response.
I appreciate any help or suggestions on locating the issues!
Thank you!

When I said "but dies when it tries to boot" and "..then no response." I meant that the keyboard works to power up the computer, but won't work for anything else. So, I am figuring that the usb ports are supplying power to the keyboard and mouse, but the usb ports aren't relaying information from the keyboard or mouse.
How do you know the mouse isn't working? Won't you have to wait until later in the boot to tell?
The poweron key is a special case. I think that it works by lowering/changing the voltage on one of the usb cables. I read about this somewhere. Anyway, this function was eliminated from later usb keyboards and macs. Maybe a working power button doesn't mean what you think.
I would love to boot into open firmware
Could you try powering up from the machine? Is there a power button on the lower right of the machine?
Have you tried this key combo?
commandoption+of
The letters are in lower case. Hold all down then poweron the machine. I'd poweron from the machine as apposed to the keyboard.
You could try another usb keyboard.
We actually did boot up the computer several times with it upside down. Not for any reason, except it's become a real PIA to flip it over every two minutes to start it, then take it apart and boot again. When booting either upside down or right side up it shows the same thing - blinking folder w/finder icon and question mark.
Yes, I agree. You could try removing the clear plastic around the bottom of the machine. At least you will not have to slide in the carriage. Note. The tv portion will still be surrounded by plastic! Don't remove the plastic around the tv!
Hope I am not interfering with Richard and his comments.
Richard: Is this the orginal keyboard? When did Apple get rid of the poweron key from the keyboard? My iMac 600 didn't have the key and my iMac 233 does.
Robert
Robert

Edge 72 3497-2HG won't boot windows 7

Hello,
I've bought 5 sets of ThinkCentre E72 (same model) to my company. First PC was unpacked and configured to work. Then made a recovery discs for windows 7 (windows 8 included on dvd). My idea was to prepare Norton Ghost copy of hdd to deploy it on rest of desktops. So prepared a 500GB hard drive and made a disc to disc copy. Next, hard drive migrated to next pc and copy applied. But when it's starting from scratch only black screen and flashing cursor is blinking, no system boot. So I've used a created recovery on previous thinkcentre but with no luck after reboot. Same black screen and cursor.
How to restore preinstalled windows 7 on ghosted machine ?
Can any help me resolve this problem ?

Fixed the problem with this setup
Of course this means i just lost 4GB.
Let me tell the full story.
In the beginning, long ago, once upon a time. My iMac had 2x2GB ram sticks which were in the two DIMM1 Banks. I then told myself "I WANT MORE RAM BECAUSE LOLZ". So i bought 2x4GB ram sticks. The two empty slots were Bank 0/DIMM0 and Bank 1/DIMM 0. and I added them in there. having done that, I booted OS X up, worked great, had 12GB, everything was shiny and beautiful. Soon after I wanted to try it out on windows. I restarted my computer and BAM the blinking cursor just sits there, being stubborn and all. I then told myself "holy balls, this new ram i got is bonkers" (them words, I blame the language filter). Then after giving it a little thought, i just asked myself if it was because I had ram from two different manufacturers. I removed my old ram, which has nice Samsung stickers on them, and booted it up on windows. Still had the same problem, I then decided that maybe this is all really mentally challenged so to win I had to think like a retard. I took my new ram and inserted it in the same slots where my old ram sticks were (DIMM1 Banks), booted windows up and IT WORKED.
I still hold all of my WHYs on this subject but I will keep messing around to see if I find a better solution than just leaving both DIMM0 banks empty

My laptop won't boot Windows

I have a Toshiba satellite P755-s5265 Windows 7. It's been acting strange for the last couple of months especially whenever I had a USB mouse or was using Chrome. By strange I mean the mouse cursor will jump or stick and sometimes it would run slow even if the CPU usage and RAM were really low. One time, about a month ago, the whole system crashed and I got a blue screen. I restarted it and it started fine. I uppdated my drivers and switched to a different USB mouse. Everything was working fine until Saturday. On Saturday, it started doing the same thing again then crashed again. When I tried to restart it wouldn't start. I've tried everything to get it it restart including safe mode etc. Nothing has worked.
I got some advice to save my files before resetting it. I loaded ubuntu (for the purpose of saving my files) from a disk and it runs ubuntu with no problems. I can even connect to the intenet. I haven't been able to save my files but that just comes with my lack of knowledgde of ubuntu I guess. But, it still won't run Windows. I've tried to load it from the Windows restore disks and it won't load. I read somewhere that they had to be "bootable" but I don't really know how to do that. I tried to make a bootable disk with IMGBurn but I don't which files to use or how to do it.
Right now, if I try to start it, I get a blank black screen with nothing visible except the cursor.
I've tried every option under F8 and get either the same black screen or a black screen that says "BOOTMGR missing"
I've tried the HDD recovery command under F12 and get the same blank screen.
I think I've switched every optiom on the Bios menu and gotten no real change.
If I hold down the 0 button I get  "BOOTMGR missing"
I would be fine with resetting the laptop if it would just work. There isn't really anything THAT important on there. I just need it to work and I can't use ubuntu for what I need it for.

Satellite P755-S5265
I haven't been able to save my files but that just comes with my lack of knowledgde of ubuntu I guess.
Maybe this helps.
   HOWTO Recover Files from a Non-Bootable Windows PC using Ubuntu Live
I've tried to load it from the Windows restore disks and it won't load.
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 76 of the User's Guide.
   Satellite/Satellite Pro P700 Series User’s Guide
-Jerry

IMac won't boot windows 7 after ram increase to 12gb

Hi all, just wondering if anyone has has a problem trying to load up windows 7 in boot camp after installing 2 4gb sticks of ram in their iMac. I have a iMac intel core 2duo and the ram is working fine in OSX. When I try to boot up in windows it just sits on the black screen with the flashing icon. I took the extra ram out and it booted up just fine. The version of windows 7 is the ultimate edition 64bit.
Any help would be great
Thanks
Mike

Fixed the problem with this setup
Of course this means i just lost 4GB.
Let me tell the full story.
In the beginning, long ago, once upon a time. My iMac had 2x2GB ram sticks which were in the two DIMM1 Banks. I then told myself "I WANT MORE RAM BECAUSE LOLZ". So i bought 2x4GB ram sticks. The two empty slots were Bank 0/DIMM0 and Bank 1/DIMM 0. and I added them in there. having done that, I booted OS X up, worked great, had 12GB, everything was shiny and beautiful. Soon after I wanted to try it out on windows. I restarted my computer and BAM the blinking cursor just sits there, being stubborn and all. I then told myself "holy balls, this new ram i got is bonkers" (them words, I blame the language filter). Then after giving it a little thought, i just asked myself if it was because I had ram from two different manufacturers. I removed my old ram, which has nice Samsung stickers on them, and booted it up on windows. Still had the same problem, I then decided that maybe this is all really mentally challenged so to win I had to think like a retard. I took my new ram and inserted it in the same slots where my old ram sticks were (DIMM1 Banks), booted windows up and IT WORKED.
I still hold all of my WHYs on this subject but I will keep messing around to see if I find a better solution than just leaving both DIMM0 banks empty

Help! My iPhone won't boot! It is stuck on the Apple logo.

Hello,
Please help me! My iPhone 4 (iOS 5.1) won't boot (it's just frozen on the Apple logo!) Please help! I don't want to restore it because I have iLife in there!

Hi gdmacguy,
I can't restore from backup becuase my phone is passcode-protected. I'm trying to restore as new device now.

Mac Mini server won't boot after logoff, any suggestions?

My mac Mini Server will not boot after administrator logoff, I get a gray screen with the spinning progress wheel, but nothing happens. Any suggestions?

Can you boot into single user mode? If so, run fsck and post the results.

Help! My Tour won't boot, gets stuck on loading screen.

Earlier today, while my tour was charging it randomly rebooted itself, but it wouldn't boot all the way - the load screen froze about 2/3 of the way through and then didn't do anything (for like 15 minutes) I did both a hard and soft reset, but the phone still won't boot past that point. Because it won't boot, I can't connect it to the computer to reinstall the OS or anything.

Hi there,
Unfortunately it sounds like you might have what is called a bricked or "nuked" BlackBerry. There are ways to fix this, but it can take a couple of extra steps.
Start off by downloading the OS from your carrier to your computer. You can find your carrier's BlackBerry download site here: http://us.blackberry.com/support/downloads/download_sites.jsp. Once you've downloaded the OS for your device, install it to your computer.
Next, go to C:\Program Files (x86)\Common Files\Research In Motion\Apploader and open the Loader.exe file (note: if you have a 32-bit OS, there will not be an (x86) after Program Files). Click Next to go to the Communication Port Selection page. Now here is where you need to watch carefully and be on the ball to ensure it works.
Take your battery out of the your BlackBerry and plug your device into your computer. As soon as you see USB-PIN:UNKNOWN in the connection spot, click Next. If you miss it, don't worry, just unplug the device and plug it back in again to start the boot cycle again. Once you've made it to the next page, you should be good to go to reload the OS. At this point in time, you can also reinsert the battery.
Then just follow the steps to reload the OS and you should be set. As a warning though, if you have not recently backed up your device, there is a chance that you may lose the data on the device.
Good luck and let us know if you have any other questions.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

NB200-110 won't boot nor allow BIOS setup

Hi there
I am new on the forum and this is my first post.
I am helping my dad with the troubleshooting of its mini notebook.
Model is NB 200 - 110.
For a few months, the notebook has been having hard time to boot.
But after several trials, it would normally finally boot and work normally.
Two weeks ago the notebook will no longer boot at all.
When powering on, you can hear some noise ( HD or Fan ?? ) then the "Toshiba Leading Innovation" screen will show up, but it won't pass this point.
On the lower part of the screen you are prompted to press F2 to enter the BIOS setup or F12 to modify the booting devices, but it won't answer to none of the keys ( like if no keyboard present ).
I guess some of the hardware is failing, but is there a way to know what part exactly ?
Thank in advance for your help.
Jean-Christophe

Hi Dr. Lamp and thank you for your answer. Though when I read it I already have solved the problem.
Lets me explain how.
Since I made the post yesterday I have been "googling" and find some interesting topics in several forums ( including this one ).
Even if it looks strange, basically the steps to follow are :
1/ place the notebook in the freezer for about 10 minutes, then start it. It should now boot correctly
2/ update the Bios to the latest version ( in my case v2.20, can be dowloaded from Toshiba support page )
Well, I have done it and it works !!
I have been able to restart the computer normally afterward.
Now, I am really curious. What can be the relationship between a sotware issue ( Bios is software right ? ) and a physical ( hardware ) solution. For cooling the notebook in the freezer definitely has physical "impact" on the system, and this allows it to boot correctly, but then, updating the Bios is fixing something in the software side....
Any logical explanation ?
Anyway, even if the mystery remains ( mystery is good sometime...), the good thing is that the notebook is now up and running.
I will update the post tomorrow to let you know if the computer is still running well.
Best regards and thanks again,
Jean-Christophe

HP Pavilion dv7-1285dx - No F11, Won't Boot Windows -- Recovery Manager PATH?

I am repairing an HP Pavilion dv7-1285dx for a friend. I have restored countless other computers but this one has driven me up the wall after 7 hours of trial and error and web searches.
Here's the deal:
--The computer came with Windows Vista
--The owner upgraded it to Windows 7 this past fall
--The comptuer came in contact with malware and will not boot
--When booting, the computer will slowly attempt to load Windows, will make it to the "welcome" screen, then restart itself, creating an infinite loop
--I do have a recovery DVD for the computer; the owner burned it apparently in late 2010
--I am proficient in MS-DOS and am comfortable using the command prompt
--The command prompt is the only way I can operate this computer at the moment. I do not have access to Windows of any sort, let alone the web
--I do have two other computers here that are mine, both are Macs and one dual-boots into Windows; I do have a few flash drives and can burn optical media if necessary
The F11 key does not work on this computer to bring up the recovery manager. I know why, too--the machine was upgraded to Windows 7, which wiped out the connection between the key and the program.
My hope is that I can find the path of the recovery manager somewhere. There was a windows.old directory on the drive; I was able to change it to Windows (the existing Windows was renamed windows.scrap).
This enabled me to at least get to an OS selection screen. There were three options: 7, 7 (recovery), and Vista (recovery). None of them are able to get me into Windows. The Vista option states it is corrupt while both 7s will try to unsuccessfully repair themselves.
I can, however, access the command prompt through the Windows recovery program (NOT the HP recovery program, which I need to restore anything from either the partition on the D: drive or the DVD).
I did notice all of the files on the DVD were in .zip format once I got deep enough in a directory. I'm debating about extracting them on one of my other comptuers to see if I can just get them over on another device, but my only external hard drive is Mac formatted so I'll have to use a USB stick.
There have been queries about this out there referring to making the D: partition active. However, all of these solutions require Windows, which I cannot use. The same is true of downloads.
My biggest question--where could the recovery program be buried? I would be willing to bring files over on another device IF AND ONLY IF THEY DO NOT REQUIRE WINDOWS.
The SMINST directory within Program Files (x86) is not present.
Basically, I need a DOS-compatible, non-Windows, way to restore this computer.
I have no other Windows installation discs for the machine currently with me. Also, the COA sticker on the bottom of the computer is extremely worn and I can only read a few digits of it, so I can't use that for a restore I guess.
On a final note--the fan in this comptuer is extremely annoying; any way to turn it off besides just the switch in the BIOS that toggles whether it runs all the time?

You don't need to be in Windows to mark the D:\Recovery partition Active. Just boot with a utility cd with the disk management capability. If you don't have one_Scroll down on the page and get>> Bootable CD If you don't have a burning app that can burn an ISO to cd get>> ImgBurn to burn the iso image to cd-a guide on using ImgBurn to write an ISO to a disc is> Here. Once created, boot from it.
Btw-have you tried booting from his Vista Recovery DVD? With the first disc in the CD/DVD drive power on the laptop and immediately tap Esc to bring up the menu. Then tap F9 Boot options. Use the arrow key to move down & highlight the Optical drive then tap Enter key. (No key is needed with Recovery DVDs)
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HELP...HP Mini 110 Won't Boot Windows !?!?

Similar Messages

Maybe you are looking for