Help I accidently spilled a water battle and some water spilled onto..

Question

My desk, possible small amount inside, on the screen and keyboard.
I got it all cleaned up but the inside if their was any inside. Unplugged my emac and started to clean the emac outside but not inside cause I am not a technical at the inside if their was any water. I booted this up and works like nothing has happen. Also on the screen were it has the border line small amount was inside their but got that cleaned out. Any advises?

Answer 1

If the computer didn't spark and give off the distictive smell of burning insulation when you turned it back on, you're in the clear by now! The seal between a CRT and the bezel of the front case isn't watertight, and it is indeed possible to short out the electronics if a conductive liquid spills onto the CRT glass and runs into the case. This is true of any CRT, not just the eMac. This is also why you'll see warnings not to spray glass cleaner directly onto a CRT (the results can be fairly spectacular with a large-screen CRT TV set, not that you want to find that out firsthand). At least your spill was water, which would leave little if any residue behind. Soda spills can literally eat away ot conductive membrane traces.
Should another water spill occur in the future, the best advice is to shut down immediately and leave the electronic devive involved powered down for one to three days depending on the ambivent humidity. I've seen suggestions, not personally tired but from a reliable source, that if the electronic device in question will fit, you can put it in an over set to its lowest temperture, not more than 160F, with the oven door open for several hours to dry it out. I'd personally stick to letting things air dry.