Help!!!..I am getting error message PGC

I am getting really short on time and i need to get this project burnt yesterday (isnt that always the case).
Ok here's my issue...I have edited footage in Pro, and built menu in Encore, brought footage in, checked for problems, None..OK..
Now when trying to build, i get almost most a milimeter from the end then it pops up the following message "PGC (my footage name) has an error @ 00;21;49;04 Internal software eroor:%0. (my footage name again)-PGC info:name=, Ref+KPGC, time 00:21:49:04..
So i went back to Pro and checked what was going on in the time frame it mentioned and it looked ok, but seen as it was so close to the end i chopped it out anyway, so i did the whole thing again, pro to encore, encore/build and the same message code is coming up with a different time, and i have repeated this 4 times now, and no i am at a loss.
Does anyone know what i can do..
Thank you
Lisa

Thanks for the quick reply, but i did export into AVI first.
I have just read on an Adobe Tech Note that this is a WAV/MPG2 issue.
They say that I have a WAv file and an MPG-2 Audio file on the same track and i need to take audio into audio editing and convert to 48khz, 16-bit to correct this, and i have just tried doing this but i dont see where it gives me the option to convert.. Do you know anything about that??..Thanks

Similar Messages

  • Help! Still get error message after installing new hard drive

    The original problem is below and thought that it would help to include it to see the initial problem.
    I went out and bought a new hard drive (500gb) and installed it in my laptop.  I went to use the restore disks and I got the same exact error mentioned below.  I used a set of disks that I copied from the original recovery disk and it still did the same.  What is the error code and how can I fix this!!
    Please help!!
    I have a Satellite A215-S7444 laptop and everytime I go to restore the drive to it's factory settings using the Toshiba recovery wizard I get the following error:  ERROR: 03-EEEE-000, AN ERROR HAS OCCURRED, PRESS [OK] TO TURN OFF COMPUTER.
    Just a note, I have used my recovery disks to restore the factory settings before with no problems at all, now I get this message.  All the files are accesible on the CD and I have no virus' on my computer.
    Lastly, the image part of the drive (The one that is like 1.5 gb) which is usually visible is not any more and has not been for a bit when you should see it when you open "My computer".  You can however see it when I go to "Administrative Tools-Computer Management."  It states that the drive is Healthy (EISA Configuration), type is basic, and there is no file system associated with the drive and there is no drive letter for it either.

    Thanks for your quick reply!  I was wondering if anyone would reply!
    I made the copies on a suggetion that the original may be scratched or something so I figured what the heck?  I did format the hard drive though.  It is a Seagate 500gb hard drive.  I only formatted the whole drive and figured that the restore disks would make the additional partition.
    Aside from that, it's the same error message that I had on the original drive.  The original drive and OS works (Vista), but I wanted to restore it because I just wanted to wipe everything and start clean.  What can be causing the error message, and what IS the error message?
    Anymore suggestions or help would be great as I am in desperate need of getting my computer back to working.
    Thanks again for replying!

  • 2011 15 in Mac Book Pro. Can't access help. Keep getting error message computer not connected to internet. But compute is connected to internet.

    When I try to access help in my 2011 MacBook Pro I get an error message that I'm not connected to the internet. But I know I am connected to the internet because I'm getting email and surfing the web at the same time. Any ideas?

    Firewall of some type blocking whatever port the help system uses?
    Router setting?

  • Please help! Keep getting error message "an internal error occurred"

    Hello,
    I'm trying to install Adobe Reader 10.1 on my macbook, but after (what looks like a successful download of Reader), when I try to open up a pdf I get the message "an internal error occurred." From here I am forced to click "OK" and then I just get a blank screen.
    I've tried to unistall and reinstall all Adobe files several times, but always get the same error message.
    Here's what I'm working with:
    Mac OS X - Version 10.5.8
    Intel Core 2 Duo
    Safari - Version 5.0.6
    I'm not super-tech savvy, I just need to download this program to be able to use an online training module for school.
    Thanks.

    Hello,
    I have had the same problem and ended up spending about 4 working hours resolving it, although I have a master degree in computer science.
    The problem is caused by an incompatibility between Adobe Acrobat Reader 6.0/7.0 and Adobe Acrobat Reader 10. It is very strange that this error was not discovered during Adobes in-house quality control. I expect such tests should have been performed prior to making new releases, in order to spare problems for users. Also, I would expect better error management in a software product of this calibre. If a missing file ends up causing a crash, one might wonder if there are also security critical flaws in the software related to e.g. parsing PDF documents.
    Problem description:
    After agreeing to the license Adobe Acrobat says "An internal error occurred" and crashes. No further information given.
    The system log reads ([…].com.adobe.Reader[220]) Exited abnormally: Interrupt
    Executing the binary directly from the terminal with -O flag gives no data on standard output. Other crash log reveals no interesting information.
    Solution:
    After some investigation, found crash is caused when /Users/[username]/Library/Application Support/Adobe/Fonts/AdobeFnt06.lst is accessed.
    Hence due to incompatibility between Adobe Acrobat Reader 6.0/7.0 and Adobe Acrobat Reader 10.
    The installer/uninstaller should probably have removed the file.
    I could delete the above file since I no longer use v6.0/7.0, and the problem was then resolved.
    Prior to this I had also deleted some of the com.adobe.* preferences from
    /Users/[username]/Library/Preferences
    /Library/Preferences
    etc.
    although I am not sure if this was necessary.
    Hope this helps.
    /Martin

  • Need help installing keep getting error message when i install program

    i download the beta version on my android epic phone by sprint and when i go to install the program it shows a screen installing then an error message pops up almost immediately and say that application was not installed how do i fix this i have tried to re-download it and install it again but it gives the same error message every time now i have also allowed outside markets apps to download on my phone and i still get this error message or what do i need to do to get it installed on my phone?

    Firefox might not be able to run on your mobile . See [https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements System requirements for Android mobile] and [https://wiki.mozilla.org/Mobile/Platforms/Android#Known_Issues Known issues for mobiles]

  • Help!  Am getting error messages trying to sync

    I have an iPhone 3G that was running fine until I updated the software to 4.2.1 about a month ago.  Everything has slowed down and some apps have started crashing when they didn't before.  However, the main problem now, as of a few days ago, is syncing.  The first error message I get is:
    "iTunes could not back up the iPhone "iPhone" because a session could not be started with the iPhone." 
    I then click "okay" and immediately get a 2nd error message saying:
    "iTunes could not sync information to the iPhone "iPhone" because another sync session was alreay running."
    There was no other session running and I have tried not only closing iTunes and restarting, but rebooting my computer.  Messages still appear each time I try to sync.
    I would really appreciate any guidance on this as Apple Care has now expired as my phone is 2.5 years old (purchased in Europe legally unlocked for about $900 -- so I'd rather wait it out until iPhone 5).
    Thank you.

    I think I recall another poster on the forum saying that they were getting this error when they tried to sync music that was corrupted in some way. In that case, they used something called "MP3Diags" to search for and repair music files that had problems.
    To test this, try syncing a smaller set of music.. just just one album ... and see if you get the same error.
    i

  • In expert mode, using the mover tool, I can not move one picture into another. Need help as I get error message

    I have two pictures in expert mode in editor. I go to "Move tool", click on picture but I am unable to move and drop in second picture. I do not get the dashed lines around the picture, and if I move cursor to
    move picture, I get the following message " This operation cannot be performed on the locked background layer. Do you want to convert the locked background layer into an editable layer?"  I have no idea
    what I need to check or uncheck to make it work.,  I am following a lesson plan in a "Infinite Skills" training course.  I talked to them, but was unable to come up with a answer.  Help, please I have been
    trying to do this move for over a week.  tks  rdf

    We don't know whether this tutorial was written for Photoshop or Photoshop Elements, more specifically for which version of PSE. There are differences. Be sure to have the layers palette open.
    Try this instead
    Open picture B, the one you wish to select something from to add to another picture.
    Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
    Go to Edit menu>copy to copy the selection to the clipboard
    Open picture A, then go to Edit>paste
    Use the move tool to position object from picture B.
    In the layers palette you should see picture A as the background layer, and object B on a separate layer.
    To unlock the background layer, double click on it in the layers palette. Perhaps your tutorial will  guide you through the process.

  • HT3275 I need help.  Keep getting error message he backup disk image "/Volumes/Data/MacBook Pro.sparsebundle" is already in use.

    I keep recieving he following error he backup disk image “/Volumes/Data/ MacBook Pro.sparsebundle” is already in use.  for time machine backup.  Any suggestions

    It is standard for Lion and Mountain Lion.
    Reboot the TC to fix it.
    If you actually run Lion then you can install 5.6 utility and just go to the disk page and click disconnect all users.. this is usually enough to fix it.. on the previous backup TM hasn't dismounted the sparsebundle correctly and so cannot mount it again.
    See C12. http://pondini.org/TM/Troubleshooting.html

  • I get error message "unknown error" When trying to log on to itunes via pc, help please!

    I get error message "unknown error" When trying to log on to itunes via pc, help please!

    Hello, trolle56.
    Thank you for the question.  You may find these articles helpful in troubleshooting the error received with the iTunes Store. 
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

  • I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

    I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

    I would guess that a TV series takes up a fair amount of storage capacity. It is just a standard message I think that may indicate that you are actually running low on storage space.
    If you go to Settings>General>About how many GBs are specified as being available?  If you are low on space maybe deleting some apps may help.

  • Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel.  Help

    am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

    Hi,
    Here is a similar thread for your reference:
    There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
    http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
    Hope this helps
    Vincent Wang
    TechNet Community Support

  • I can't open PSE.  Get error message 150:30 and restarting computer doesn't help.  Any suggestions?

    I can't open PSE.  Get error message 150:30 and restarting computer doesn't help.  Any suggestions?

    Please try out the instructions mentioned in this article.
    Thanks!!

  • Hello - I am trying to sync my ipod touch with itunes and I have done many times and now today I am getting error message 13019. I have listened to all the suggestions of how to fix it from apple and now I lost all my music off my ipod. HELP?

    Hello - I have been getting error message 13019 all afternoon and I have never had that before. I have listened to all the suggestions on this site and nothing has helped. And know I have lost all the music off my ipod (luckily it is still on itunes) I really need this figured out asap since I leave on vacation in 4 days! Please somebody help. I have never had so many issues

    When you open iTunes and plug in iPhone (iPod) to computer, it appear in the left bar. Then just simply right click on you iPhone (iPod) and choose Transfer Purchases, this should copy your purchased items to your computer.
    Hope this help

  • HT201210 im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

    im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

    Hey santhosh.pv,
    We have a few articles that can help troubleshoot the alert message in iTunes you see when you are trying to restore your iPhone 4. You can resolve many restore issues using the troubleshooting steps documented here:
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    The next article is the companion of the more general article above. Follow the above article first. If, after following that article, the issue persists, continue with this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Cheers,
    David

  • Trying to download iTunes on my husband's windows vista laptop and we keep getting error messages that say error z, apple application support was not found, windows error 2. Tried 2 different browsers and it still would not work. Can you help? Thank you.

    Trying to download iTunes on my husband' s windows vista laptop. Have tried 2 different browsers and it almost finishes the download process and we get error messages that say "error z, apple application was not found, windows error 2" Can you help? Thank you.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

Maybe you are looking for

  • How can I display my MS Outlook/Exchange 2010 Calendar events on my web application's calendar?

    I'm building a web (client) application (built in html/JavaScript/jQuery) that has a built-in calendar. I would like to pull in my Outlook/Exchange Calendar events and display them in my web application's calendar. What is the best way to do that fro

  • Universe based on SAP BW

    Hey everybody, exepting that I've got problems to create Universes based on Multiproviders (an other thread: /community [original link is broken]) I have an other problem with that ones I'm able to create out of SAP Cubes. When choosing a connection

  • System message:Procurement of material&blocked for quality reasons(0006 883

    Hi Greetings! I have the following issue. I need to make the message "Procurement of material & blocked for quality reasons" as Error message . Message number - 00 06 883. This will not allow to create PO , if the "Blocking Function" - 02 "Block Requ

  • Upgrade from 10.1.2 build 1811 to 10.1.2.1 build 1913

    I was having some build issues in 10.1.2 and downloaded 10.1.2.1 this morning. According to the instructions I could find, I created a new directory (OraBPELPM_2) and extracted all files into it. I started the application using C:\OraBPELPM_2\jdev\gi

  • Business Objects and Solaris 10

    Post Author: amr_foci CA Forum: Deployment any one had experience installing business objects XI 3.0 on solaris 10 server?