Help, I am having problems with Identity plates and my logo

I have always used the identity plates with my logo watermark to post to facebook and other locations. When I click on which logo under my identity plates I need, I have always been able to move it around the photo, all of a suddent, I am not able to do this. I can't figure out what I did. My logos and identity plates have not changed. Help!

Never mind, got it figured out!!

Similar Messages

Can you help I was having problems with my iPod so I restored it but I accidentally set it up as a new iPod is there any way to restore it from an old backup when I right click iPod in iTunes there isn't one anyway to recover one or find it on computer

Hi can you help I was having problems with my iPod so I restored it but I
accidentally set it up as a new iPod is there any way to restore it from an old
backup when I right click iPod in iTunes there isn't one anyway to recover one
or find it on computer

The following says how to restore from backup.
iOS: How to back up
If you go to iTunes>Preferences>Devices you can see if you have an iTunes backup. You need one dated before or the exact time you started the restore.

Hi im having problems with my internet and email ive reset the network even with my wifi on ive also turned off and on airplane mode help please thank you

hi im having problems with my internet and email Ive reset the network even with my WiFi on Ive also turned off and on airplane mode help please thank you

hi Ive reset my network toggled the airplane on and off and turned off my carrier off then turned my phone off and turned my carrier back on but still problem persists

I'm having problems with iPad 2 and my smart cover. The attachment seems to be depolarized and it moves around causing the device to toggle and flash like its coming on or shorting. Anyone having problems?

I'm having problems with iPad 2 and my smart cover. The attachment seems to be depolarized, trys to connect using the back (curved) edge of the magnetized bracket. When I try to attach it, it moves around causing the device to toggle in a way that looks like the camera flash. Anyone having problems? Help.

Update. My carrier says the antenna of my iPhone 4s is not so good as the one in the iPhone 3G. They can't solve the problem. Their signal is too weak for the 4s at places I spend most of my time. Not the answer I expected, but I'm free to choose an other carrier. Hope this will help.
This was not the correct answer, I accidentially clicked the button..
Message was edited by: vasch

Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?

Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I am having problems with Time Machine and having enough space to finish my last back up.

I am having problems with Time Machine and having enough space to finish my last back up.

Take a look at this link, http://support.apple.com/kb/HT1427

Im having problems with my illustrator , and i don't know how to fix it?

hey, guys. um my illustrator is having this problem with the navigator . and its makiing this fat lines and when i click the line on the little box in the bottom
and put it at 100 % it comes out like this
all small and i dont understand why is doing this.
can tou guys please help me with this i have a big project due and i cant work with this like it is ...>!!!!!

You can change your artboard size without having to make a new document.
1. Click on the Artboard Tool
2. In the top menu, you can type new dimensions. Make sure to type in the correct units!

Anyone NOT having problems with ITunes 8 and latest firmware update???

I have really been put off updating to ITunes 8. The firmware update appears to be doing well. Is there anyone that uses a MacBook like myself who have had absolutely NO problems with new Itunes and firmware update? Answers on the back of a £50 note....

Not having issues now that I have updated all i(hardware) firmware to version 2.1, two phones and an iPod Touch, all work fine (So Far) (knocking on wood). As far as iTunes goes I have mixed feelings. It's a bit faster and more stable, however they removed the "Burn CD" ability from the software. That blows a bit as I would make CD's from some of my play lists to play in the car. Yes I can dock my devices in the car, but as a matter of convenience it's easier to fire up the CD when your in a rush.

Having problems with front row (and the opticle drive)

I bought my macbook three days ago, and I'm already having problems. First off, I transfered music from my user profile on my old iMac G5 to the macbook via data DVD. My music collection had some purchaces from the itunes store, so I had to go through the authorization thing, and I can now play them just fine in the iTunes library, but the problem is, if I try to use the front row program to play my purchaced music, I get the message saying that I have to authorize it first. What the ****? Does anybody else have this problem? Also, like many other macbook users, I'm having problems with the opticle drive, such as getting cds to be recognized and other things of that nature.

I noticed that this problem started after I tried to use a software to unlock my drive's region...
I believe this is the problem. The VLC Media Player will usually play DVDs from other regions without changing the settings on your optical drive. You may need to reset your optical drive's firmware back to the original setting, make sure you have the region set for the one you'd prefer to use the most and then use VLC to play the other DVDs.
-Doug
P.S. After two years in the Front Row forum, I'm not sure I've ever heard of anyone playing HDDVD_TS folders with Front Row. I'm not saying it won't work, but I'm not sure it's really supported either. I do have DVD Studio Pro myself, but I'll have friends or family staying with me for nearly the next month, so my evenings and weekends will be a bit full to try making one up for testing...

Help, we're having problems with Flash Player

Hi.
Up until yesterday we had flash player and it was working normally. Yesterday when we went onto IE8 we didn't have it any longer. Me and my mun tried downloading flash player for Windows XP on Internet Explorer again. We untick the box saying to add a google toolbar which is optional. We click the download button at the bottom of the page and on the download page a blue box is meant to come up involving ActiveX. The page comes up with the blue box but then the page goes off and a new page coming up with a cross in a red circle and next to it, it says "Internet Explorer has closed this webpage to help protect your computer" "A malfunctioning or malicious add-on has caused Internet Explorer to close this webpage. Below this it comes up with a list of options:
Go to your home page
Try to return to Adobe.com
More Information
We have tried clicking "Try to return to Adobe.com" many times and repeating the same process but the same thing still happens.
We don't know what to do as without Flash Player there is a limited number of things we can do. We have tried altering some of our settings but still no luck. We are going round and round in circles.

Hello, Sorry you are having problems. I would like you to go to this Adobe test site with IE8. Can you see the animation and what version of Flash Player does it say you have?
If you use any other browser, test with it too.
Are you the Administrator and are you using that Account? It is necessary when Installing Flash Player.
After that you can download the Uninstall and SAVE it to your Desktop:
http://kb2.adobe.com/cps/141/tn_14157.html
Then download and SAVE the Installer for Internet Explorer to your Desktop:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
For now just put these on your Desktop and then to the test above and let me know.
Also What Anti-Virus do you have?
Thanks,
eidnolb

Having problems with new ipad and charging?? Help me please

I have the new ipad with retina display and it had that new smaller charger as you probably already know, well I've only had this ipad for about three months and I've already gone through two chargers for the same problem which is When I plug it in it does not charge unless I unplug it and plug it in about 40 times and then it starts to charge! Do you think it may have something to do with the ipad itself or am I just getting faulty chargers? It's not that cheap to keep re-buying these chargers ):

Drusillameow wrote:
... am I just getting faulty chargers? It's not that cheap to keep re-buying these chargers ):
Since your iPad is quite new, why are you "re-buying" chargers? Are you not using the charger that came in the box -- the original Apple charger? If you were doing that, and did not mishandle the charger (e.g., tug on the cord to pull the charger out of the wall socket), Apple would take care of the charger under its warranty.
So I suspect you're either mishandling the charger (not likely), or using some third party charger (more likely).
If it's the original Apple charger, and you're not mishandling it, contact Apple for assistance.

Still having problems with UAG SP4 and Windows 8.1

Hello,
This must be one of many threads on this topic but I'm stuck.
Because of the incompatibility with 8.1 and UAG2010 we've updated to SP4. Now, out-of-the-box 8.1 no longer wants to install the client components via ActiveX. I can log in, but the client isn't compliant so not all functions are available.
I actually had to manually get the client components from our UAG server. After installing I compared the System Information window with that of my 8.0 / IE10 installation and the only difference is that I can't see the version of the Device Session Cleanup
and SSL Application Tunneling gives me a "red X" in 8.0 and says "not detected" in 8.1. I did notice some .NET 3.5 components missing in 8.1 so I installed those too.
Compatibility mode does not help and switching to IE9 mode using the developer console is a workaround, not a solution.
What am I not seeing here?

Hi,
maybe the same problem we've faced:
http://social.technet.microsoft.com/Forums/forefront/en-US/2e8d916f-d694-42de-a96f-ad2b8761775c/no-activex-uag-client-install-golden-bar-on-ie11-after-upgrading-to-uag-sp4?forum=forefrontedgeiag
Regards,
Chris

Having problems with OPA 10 and office 2007 templates

Hi,
I have a OPA 10 and office 2007 set up which is having some issues with the macros. Seems to me that the visual basic code is not kicking off really well sometimes. I am trying to map the sequence which leads to the errors and I believe that the issue is around opening an old word doc which has a old template version (.dot). This may be the cause for OPA getting lost when working with word 2007.
For example, I ask to open a rules doc and the visual basic tells me that OPA couldn't open the doc but word is opening the doc anyway. However none of the toolbar commands work as well as I can 't save the doc etc.
Have you experienced any issue with OPA 10 and Office 2007? Any special word configuration? Should i go back to office 2003?
BTW, I have both dotm and dot templates loaded as add-ins in word. The dotm toolbar looks good but the dot toolbar is a bit strange in 2007.
Cheers,
Paulo

Hi Paulo,
Have a look at the following tips from Davin Fifield about troubleshooting the toolbar.
Sometimes when using Oracle Policy Modeling, Microsoft Word documents that are part of a Policy Modeling project may appear without the OPA toolbar (in Office 2003) or OPA options on the Add-Ins ribbon (in Office 2007) when opened in Microsoft Word.
This problem can be caused by various factors.
Here are the top three troubleshooting steps to try to recover from this situation.
1. With your project open in Oracle Policy Modeling, run Update Oracle Policy Templates from the Tools menu. This will attempt to make sure the correct Word template is attached to each project Word document that is not currently excluded from the build. Open a Word document to see if the toolbar/ribbon is now displayed correctly. If not, continue to step 2.
2. Try changing the UI language for your project. To do this, choose Options, from the Tools menu in Oracle Policy Modeling. Select Environment. Selet General. Under Authoring UI Language, choose a language other than your preferred UI language, and click OK. Then repeat these steps to revert to your preferred language. Open a Word document to see if the toolbar/ribbon is now displayed correctly. If not, continue to step 3.
3. Open one of the Word documents in your Policy Modeling project. Run the macro UpdateToolbar: In Word 2007, choose the View ribbon, then select Macros/View Macros, highlight the UpdateToolbar macro, then choose Run.
Does this resolve your issue?
Jasmine

Help, I am having problems with Identity plates and my logo

Similar Messages

Maybe you are looking for