Help, i am trying to restore my iphone 4s
Help, i am trying to restore my iphone 4s but everytime i try i get one of three errors; Error 9, Error 14 or Error 0xE000084. I have had this problem b4 and have taken it to apple and all they do is plug it in and it works please help, i rather not have to go to apple.
Hello Zerolove02,
Thank you for using Apple Support Communities.
For more information, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/ts3221?viewlocale=es_es
Have a nice day,
Mario
Similar Messages
-
Please help, I am trying to restore my iphone 3gs, but i keep getting errors like 11 which is not listed in this site and i alos get error 1 and -1. please help.
Did you manage to fix the issue?
I have exactly the same issue as described above : I installed the update 5.1.1 on my iphone 3GS and since then, I can not turn it on anymore. In Itunes, I get an error 37 when I am doing a restauration and it stops.
This error has nothing to do with firewall : I tried to restore the phone on several computers, including in an Apple reseller and it did not work anywhere.
I spent several hours on phone with the hotline from Apple which arrived to the conclusion that it is a hardware issue, but the phone was working perfectly fine until I installed this update! -
im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help
Hey santhosh.pv,
We have a few articles that can help troubleshoot the alert message in iTunes you see when you are trying to restore your iPhone 4. You can resolve many restore issues using the troubleshooting steps documented here:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
The next article is the companion of the more general article above. Follow the above article first. If, after following that article, the issue persists, continue with this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Cheers,
David -
my iphone 4 i bought was jailbroken to ios 6.0.1 redsn0w but i tried to restore the iphone and now it keeps saying connect to itunes but when i connect and try to restore an "unknown error" occurs and it will not boot up whatsoever. please help!
If you want to solve your problems, unjailbreak. And don't do it again, because jailbreaking causes problems as you read about in that article. You can try Recovery Mode: http://support.apple.com/kb/HT1808
-
Hi ,i trying to restore my iphone 3g ,,i getting message 1015 !!! any help
Nope. No help here. That error indicates the phone was jailbroken, hacked, or otherwise modified.
It can't be discussed here per the terms of service. -
i was trying to restore my iPhone 4(iOS 7.0.4) on my hp laptop. but when i was restoring, it gets stuck in middle.then it keep showing recovery mode screen and i tried again to restore but same problem. Always stuck at the same point. plz help me.
Hi Varinder Ghuman,
Thanks for using Apple Support Communities. If you're unable to restore your iPhone, this article may help:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers,
- Ari -
i am trying to restore my iphone 4s from ios 6.1.3 to 6.1.2 but i keep on having this "3194" message. any help please.
Because you cannot go back to a previous version of iOS.
-
i keep trying to restore my iphone 3G but a error keeps poping up . its called "unknown error 1015" can anyone help?? i just got the iphone.
More Like This
upgrade and restore error
Does anyone know how to fix "error code 1015" ?
What is the cause of "error 1015" when trying to restore and update an iPhone 3gs?
unknown error 1015?
how can I fix my iphone with error (1015)
you can find this on the right side of this page, many people have had this problem and there is no reason to repost this becuase you can find an answer by just searching for it. -
I have got error (error = -3259) when tried to restore my iphone using itunes...unable to download the iphone software. I have tried serval times but the same issue happening again and again Anyone can help with this issue?
http://ipod.about.com/od/itunesproblems/qt/Fixing-Itunes-Error-3259.htm
-
Im trying to restore my iPhone 5 backup that i made a few minutes ago to my new iPhone 6 - but it keeps saying backup failed. What do i do - need help Please.
Here's what I found in this article Update and restore error messages on iPhone and iPod touch about error 14:
I think you should start with checking the security software settings first.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network. -
I have tried to restore my iphone as it just turned itself off and now won't restart. So I tried to restore via itunes on the computer. It could not restore my phone due to an unknown error occurring (3194), please could someone let me know what I should do now?
I love my phone and I can't be without it!!!
HELP........http://support.apple.com/kb/ts4451
-
I'm trying to restore my iPhone, but every time I plug it in to my computer it doesn't show up in iTunes. Someone please help?!?!
Hey nataliexcupcakes,
If your iPhone isn't appearing under Devices in iTunes after you connect it, and it can't be restored, you'll want to follow along with this article for a resolution:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Best,
David -
i am trying to restore my iphone 3gs to 6.1.3 but i get an error (1618) any help?
Hey CALLMEALEX,
Thanks for the question. I understand you are experiencing issues restoring your iPhone 3GS to iOS 6.1.3, the following article may assist you in resolving this issue:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/TS1275
Thanks,
Matt M. -
Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!
Jai141 wrote:
... and im not sure as i brought the phone of someone else.. i will have to ask them
Good Luck.
Jai141 wrote:
Thanks
You're Welcome. -
trying to restore my iphone 3g to factory settings but as the restore mode almost finishes it says error 1015 help?
Your phone was jailbroken. Buy a new one.
Maybe you are looking for
-
MANAGED RECOVERY AT STANDBY DATABASE REQURING OLD ARCHIVELOGS ORA-00308
Oracle 9.2.0.4 HP-UX 11.11i The database in Archivelog mode, single standby database in managed recovery mode. keeping standby in sync with manual applying the ARCHIVELOG from primary to standby database. primary database was 3 REDO log members of 10
-
Hi, I have a web application where is needed to read a file. Is there a way to read a file (FileInputStream) using a relative path? How can I read a file if I am not sure in wich platform will be installed? (you know, absolute paths are diferent betw
-
i'm having trouble with my iCloud photos. I thought i could be a little sneaky and take a photo of my photos that were more than 30 days old, so they would be uploaded along with my new photos. that part worked, but i can't select them to upload them
-
Optimize Query with decode fuction
When i use this query , its cost is around 13455 . SELECT X.col1, X.col2 FROM A X, B Y, C Z WHERE X.col1 = Y.col3 AND Z.col4 = Y.col5 AND Z.col5 <> 'ORDER_SUBMITTED' AND Z.col6 <> 'INACTIVE' AND X.col7 = 'Y' --AND decode(X.col,'Y','YES')= 'YES' AND Y
-
How are Adobe's training courses produced?
I'm taking some Adobe training produced by Element K. Since I produce this kind of thing myself, I'm looking closely at their style. It's quite polished, and I'm wondering if this can be done with with Robohelp and Captivate only. I think it can, but