Help! I am unable to get Boot Camp to recognize my Windows disc; whether I use USB, DVD, CD whatever, I get an error message to insert the Windows Software and wait. HELP please!

Like I said in my headline, I simply cannot get Boot Camp Assistant to recognize my Windows Software, no matter what method I use. I don't know if I'm not making it mountable or what. Any and all help would be greatly appreciated.
Thank you in advance,
Brandon

Welcome to Apple Support Communities
Simply skip Boot Camp Assistant and create the Windows partition with Disk Utility > http://pondini.org/OSX/DU3.html Select "MS-DOS (FAT)" as "Format", and apply the changes. By security, choose "BOOTCAMP" as the name of the partition.
In fact, the only thing that Boot Camp Assistant does is to help you create the Windows partition and download the Windows support software.
Before creating the partition, open Boot Camp Assistant, tick only the option to download the Windows support software and burn it into a USB drive. You will need it later. Then, make the partition as described above.
Finally, insert the Windows DVD, restart and hold the C key while your Mac is starting. Since here, you can follow the Apple's steps > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf Remember to choose the BOOTCAMP partition when the installer asks you to format it.
After installing Windows, insert the USB drive and install the Windows support software

Similar Messages

HT201210 I get an error message that says the iPad software update server could not be contacted. How do I fix that?

I am trying to upgrade my iPad from version 4.3.5 to the new 5.0.1 and I get the above error message. It says, The iPad software update server could not be contacted. I also do not have an Update button when I go into Settings and General.

You must have ios 5 or later for that facility to show up. Meanwhile, keep trying /try later via iTunes on your computer..

I like to play games on facebook and for some reason I keep getting an error message saying that the shockwave player and flash player has crashed I use firefox could someone please give me step by step instructions to fix this issue?

I have Windows 8.1, my adobe player is the most updated version also.... hope this helps

Yeah, Firefox and Flash Player isn't a super stable combination on Windows 8.1 at the moment. We're collaborating closely with Mozilla to improve that, but that effort is going to happen over several months.
In the meantime, you might want to take a look at the other options. Microsoft invested a lot of time and effort into making the Flash experience on Win8.1 really good in IE, as did Google with Chrome.

I have Windows 7. When I try to print an album cover on a CD I burned, I get an error message that there is a problem and it shuts down iTunes and says will notify me once the problem is fixed

I have iTunes version 11.3.1.2 and a Windows 7 Professional aith Service Pack 1. When I try to print a CD cover from a disc I burned, I get an error message that stops the printing task and shuts down iTunes and tells me once the problem is found they will notify me. When this happened before I got sent a message from Apple that I needed to install a new verion of iTunes. I believe I now have the latest iTunes version. So why can't I print?
Is this the problem below? Does the graphics driver cause the problem?
Solve a problem with NVIDIA Graphics Driver
NVIDIA Graphics Driver has stopped working properly.
A driver update, if available, might prevent this problem from recurring.

Try a different media. I have good luck using Maxell discs.

I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to l

I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to launch any of my programs from adobe. I tried to do a trail with a program and I am still getting the same message.

Davinci thank you for the update.
Please utilize any available uninstallers that are located in the Applications/Utilities/Adobe Installers folder. Once all of the available uninstallers have been run you will then want to rerun the CC Cleaner Tool. You can find directions on the use of the CC Cleaner Tool and a download link at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html. After the CC Cleaner Tool is run then please reinstall the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.
The CC Cleaner Tool is designed to be used after running the uninstallers. Without running the uninstallers first then a complete removal may not be possible.

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". need help

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

I'm trying to email a photo from my iPhoto album, but I'm getting an error message that says "The email server didn't recognize your username/password combination." Any ideas? I can't find any help in Apple on-line support.

I'm trying to email a photo from one of my iPhoto albums, however I'm getting an error message that says "The email server didn’t recognize your username/password combination." Any ideas? I can't find any help in Apple on-line support.

Never mind. I was able to find the solution via an earlier post from West. Thank you!

I get this error message when trying to upgrade software "The Iphone update software server could not be contacted" Can anyone help?

I get this error message when trying to upgrade software "The Iphone update software server could not be contacted" Can anyone help?

I'd start with the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

HT1539 Why Do I keep getting an error message telling me "Code redemption is temporarily unavailable. Please try again later." whenever I try to redeem my digital copy code for "Oz The Great and Powerful"?

Why Do I keep getting an error message telling me "Code redemption is temporarily unavailable. Please try again later." whenever I try to redeem my digital copy code for "Oz The Great and Powerful"?

I had the same problem so I decided to try going to website on the back. (DisneyOzMovieandOffers.com). It will take you to a page that says to redeem code, enter the code that is given to you and click enter. It will give you options of where you would like to download it from. Click iTunes and it will give you the correct code to download the movie from iTunes.

When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until

When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until yesterday. HELP!

The specific text of the error message is very important here — I'm not sure exactly you're encountering here.
If you're able to connect to your email server and are able send email to other email addresses and if the failures are specific to one email recipient address, then please contact the intended recipient of the failing email, and confirm their address is valid. (This is the way I'm reading your question.)
If you are unable to send any email to any other email addresses and this is specific to your email address, then try the web mail client interface (if one is available) to verify your login user and password, and check with your email ISP for assistance. If your email password works via web mail, follow this Apple troubleshooting guide, then — if everything else fails — I'd probably then entirely remove the email account from Mail.app and re-add it per your email ISP's particular setup requirements. (Some issue with the setup or maybe a corrupt setting in OS X or a problem at the mail ISP servers is a common problem, but this effects attempts to send to all email addresses via that account.)
An email account setup is specific to an email provider, unfortunately. If you're using one of the more common email ISPs, then there are usually setup guides and frequently-asked questions posted online.

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the n

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!

Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel

How do I download the windows support software for my Mac? I am getting an error message saying that the software is not available

How do I download the windows support software for my Mac? I am getting an error message saying that the software is not available

Welcome to Apple Support Communities
I do not recommend you to download the Windows support software through Boot Camp Assistant.
Instead, you can download the Windows support software for most Macs from the Apple website. Go to this website, look for your MacBook Pro model and the Windows version you want to install, and follow its steps.
To install Windows > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

I keep getting an error message that says "the ipod cannot not be synced""an unknown error occured (13019).

I keep getting an error message that says "the ipod cannot not be synced""an unknown error occured (13019). I am trying to put albums on to my ipod by dragging and dropping. I have it set to manually manage music and videos. The albums appear in the music section under Devices, but they don't appear on my actual ipod.
I have never had any problems doing this before, only in the last few days.

I am having the exact same issue as you are with my iPod nano. This started happening the same day after I updated the iPod software, so I wonder if it is a bug within the software that Apple needs to resolve. I dragged 3 playlists of new music from my iTunes over to my iPod and sometime while it was trying to add those songs, the error 13019 popped up. Another note, which may not be related at all, was that iTunes told me at some point during this process (I believe before the error notification, but I'm not sure and that may be helpful to know) that I did not have enough room on the iPod to copy all of the songs, but it would copy as many as it could. What is curious, like in your situation, is now all the songs it supposedly copied appear to be on the iPod under the Device->iPod->Music label in iTunes when it is plugged into my computer, the playlists in question are also showing up there, and it does indeed say my memory is full under the iPod's general tab in iTunes. However, when going through my actual iPod when it is not plugged in, none of those songs or playlists are anywhere to be found.
Anyways, all the established solutions to the 13019 error do not apply to this situation, as my iPod has always been set to manually managed so "unchecking" the Sync Music option under the Music tab of the iPod and rechecking it will not work because it was never checked in the first place. And voice memos are obviously not applicable since we are not talking about an iPhone failing to sync music.
Unless anyone can provide a new solution here, I may just have to take my computer and iPod up to the genius bar. Any suggestions would be appreciated.

Help! I am unable to get Boot Camp to recognize my Windows disc; whether I use USB, DVD, CD whatever, I get an error message to insert the Windows Software and wait. HELP please!

Similar Messages

Maybe you are looking for