Help, I can not capture Audio Pinnacle to a flash media player encoder 2.5

Help Please ...... As you can do to capture in Adobe Flash
Media Encoder 2.5 audio moviebox A Pinnacle Studio Plus, since only
TE Tom THE video, but does not capture the audio, and therefore I
have a delay in the video against Audi. Do I configure Encoder
2.5.

Here is the fix:
http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=29191

Similar Messages

  • Why i can not open Video Capture Device Settings in  Adobe Flash Media Live Encoder?

    Hi! I've got a problem with Adobe Flash Media Live Encoder 3.2. Why i can not open Video Capture Device Settings? I'm clicking this button, but it doesn't appear, there is just a blinking of the camera's window. Please help me, i'm looking like a shining red pig! Need to change the light or contrast.

    "The audio preview in FMLE indicates there IS audio being input"
    How do you know this?
    are you "Saving to file"? how is the audio in the saved file?
    Adninjastrator

  • On my iPhone 4 I can play music through the speaker or headphones, but I can not get audio in phone mode, I can't hear anything nor can anyone hear me! Help. Please.

    On my iPhone 4 I can play music through the speaker or headphones, but I can not get audio in phone mode! I can hear anything through the ear piece or via a headphone. Nor can people hear me when I call. I must be doing something wrong, but what?

    Hello Angela,
    Thank you for the details of the issue you are experiencing with sound on your iPhone.  I recommend the following steps for an issue like this:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, followthese troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the full article here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Can not capture

    Upgraded Premiere Pro, Have bought  the new mac computer. Using a Canon DV camera, and can not capture any footage from my DV tapes. Have tried everything!!! Premiere just say Capture Device Offline,. Read through many threads and have got no idea how to fix. Help me Please... I just bought this MAC and now its useless if i can't use it to edit
    Even tried all the steps on the web bpage, i do not have a firewire, the USB port i use to plug in are through an AV device (yellow, red, white cables) that then filter through top a USB port cable and plugged into the back of my computer.

    I mean it's the new Mac do it's just a thin screen, I would rather leave it and have an external cord.
    Why has Mac not allowed for this, they are suppose to be the best & up to date with video software?
    Unfortunately, Apple knows best, and will dictate that to its loyal users. They must adapt to the "party line," or move to a PC. That is just the way they think.
    Sorry for the bad news,
    Hunt

  • Can not capture with CS6 and blackmagic multibridge pro on HP Z820

    This is the setup:
    Z820 and Windows 7 pro
    Multibridge Pro and driver 9.7.7
    CS6.0.5
    In premiere I can not capture via the Multibridge. The app crash when entering capture mode. I can not change setting in my capture device.
    On the same PC I CAN capture with Media Composer v7 and BM Media Express.
    I've tried several version of the BM driver, no changes.
    The BM PCIe card is in slot 1 and the PC bios I have update to v3.50.
    Anyone having the same experience?
    Regards
    Danny

    Thanks for the reply. I know YouTube is not the way to check quality but it shows the stutter in playback. The quality wasn't the issue and it is filmed with my phone. The video shows what it needs to show.
    Disk setup is a ddp server (check http://www.dynamicdrivepool.com/ for info) connected with 2 network cables for optimal speed.
    Video cars is a NVIDIA Quadro K4000.
    Premiere Pro CC is up to date with the latest version.
    Export settings? I think you mean sequence settings:
    For the record: I'm not trying to play a sequence with multiple layers of video of different codecs and loaded with effects. It's just a video chopped to pieces and an adjustment layer with some simple effects. The way Adobe is advertising the performance of Premiere Pro, one would think that couldn't be a problem for any Z820. Or that's what I was thinking. Hope you or anyone can help.

  • I can not record audio with the internal microphone or a external microphone? What is the fix?

    I can not record audio with the internal microphone or a external microphone? What is the fix?

    jw000.w wrote:
    I do appologize and appreciate it! Im and running OS X
    Please click on the following link & do the necessary in providing the info previously requested.
    http://support.apple.com/kb/HT1758 How to identify iMac models
    Click on the Apple>About This Computer.  The window will tell you which version OS is currently installed on your iMac.
    =========================
    It would help us to know which computer model you have, which OS you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.This will help in providing you with the proper and/or correct solutions.
    Thank You.

  • Can not capture from Sony HDV 1080i (recording in 60i)

    Hello
    We are trying to capture from the above camera to a Mac Dual G5. We are using FinalCutPro 5.1.2. We are using a FireWire 400 cable to connect to the front of the computer (have also tryed back of Cinema Display). The footage was captured in HDV1080/60i, and we have tried the corresponding formats in Easy Setup (Basic, standard, Apple Intermediate).
    The problem: we can control the camera from the Log and Capture windows, but when starting capture, no data is coming in, and the program therefor gives up after a few seconds (displaying a no data error message).
    We have tried Batch and Now capture. We can log clips, and get the correct time code, but can not capture those clips due to the no data problem.

    This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
    First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
    FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
    http://docs.info.apple.com/article.html?artnum=301852
    Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
    If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
    Still not working? Try a different Firewire cable.
    Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
    Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
    Let us know how you get on!
    Andy
    Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E   Mac OS X (10.4.7)  
    "I've taught you all I know, and still you know nothing".

  • Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

    Strange. I can play all my clips in FCP 7, but can not export them via share, nor submit them via Compressor. What happened? Thank yiou for your kind help, I can not continue my work! FCP 7!

    When FCP/FCS begins to act unexpectedly, the usual first step is to trash your preferences:
    https://discussions.apple.com/docs/DOC-2491
    MtD

  • I ask for help, I can not cancel a monthly subscription to Adobe! contrary to the tutorial does not appear  scribed CANCEL PLAN on my page management plan, is not worse than any serial number of my subscription, where is it? how can I cancel monthly charg

    I ask for help, I can not cancel a monthly subscription to Adobe.
    contrary to the tutorial does not appear scribed "CANCEL PLAN" on my page management plan, is not worse than any serial number of my subscription, where is it? how can I cancel monthly charge? 

    Just to clarify: This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
    Have you done a Forum search?
    How can I delete my account? There is no "cancel plan" in my creative cloud free membership.
    Contact Customer Care

  • Help I can not download the 4.2 update because doing so is stunned and then my iPhone 3G I have to take the service center to enable it I can do?

    Help I can not download the 4.2 update because doing so is stunned and then my iPhone 3G I have to take the service center to enable it I can do?

    See if your hardware supports Snow Leopard
    System Requirements 
    Mac
            Mac computer with an Intel processor
    5 GB free hard drive space
    1 GB RAM
    DVD drive for installation
    Snow Leopard US$19.99 order below:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • Pleas help I can not buy cristal in the game clash of clans the reaso?

    Pleas help I can not buy cristal in the game clash of clans the reaso?

    How would we know?
    What happens when you try?
    Error message?
    What does it say?
    Any info about your issue?

  • Flash Media Live Encoder not capture audio device

    Welcome, i have the problem with not capture audio device in Windows 8 32bit, i used the virtual audio cable
    this is problem with registry?

    if you dont like to turn off firewall settings, add 1935, 80 and 443 under exception. For this Choose firewire settings from Control Panel.

  • I'm looking for a capture device that is compatible with Adobe Flash Media Live Encoder. I bought elgato but it is not compatible. Anyone know?

    I'm looking for a capture device that is compatible with Adobe Flash Media Live Encoder. I bought elgato but it is not compatible. Anyone know?

    This is just a shot in the dark....
    Do you have all your devices hooked up (and on) when you launch FMLE?  For example -- your camera or digitizer?  When FMLE launches it will try to launch with the last known settings... including input devices.  If it can't find these devices (they're not hooked up and on) it can crash, although in most situations it will simply show a default screen with default settings.
    If you do have your equipment hooked up (and on) when you launch FMLE, try unplugging them and then launching FMLE so that it opens up in default configuration mode (no input devices selected; all default settings).  Then uncheck the "preview" boxes for both your input and output preview windows.  Close FMLE and then plug in your equipment (and turn it on) and relaunch FMLE.  I offer this suggestion as FMLE can sometimes act funny when the preview windows are open with certain types of input devices.  Don't worry -- you don't have to keep the preview windows off forever.  If you can get FMLE to successfully launch with the preview windows off, then you can set your settings however you like and save the profile.  Then quit and relaunch FMLE and then turn the preview windows back on and see if it works.  If it does, great.  Just be aware that making any settings changes while the preview windows are open could result in FMLE crashing.   Again -- this only happens with some capture devices, such as certain Dazzle capture boxes.
    If none of this works, you could always try to upgrade to FMLE 3.2 and see if that solves your problem.

  • I can not download latest version of adobe flash it quits every time I try to open it.

    I can not download latest version of adobe flash it quits every time I try to open it.

    Try this: Adobe Flash Player 12.0.0.70.

  • Audio player not give an option on the Adobe Flash Media Live Encoder

    Audio player not give an option on the Adobe Flash Media Live Encoder:  How do I resolve this problem?

    Please ask your question on Adobe Media Encoder forum: http://forums.adobe.com/community/ame
    This forum is for Adobe Reader.
    ~Deepak

Maybe you are looking for