Help I Can only hear sound from my juke b

can anyone help me i think i screwed up my computers sound and i dont know how. I can only hear sound from musicmatch jukebox when i play a song. i cannot hear sounds from any of my games or othe applications. please help me!

Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth. 
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.

Similar Messages

  • I can only hear sound from one side of the head phone

    I've plug in my bass guitar through a cord and a converter in the line in port on my PC. Then checked 'listen to this device' (head phone) which is connected properly as it worked perfectly when I play any sound in ma PC. But when I play my guitar, I can
    only hear it from one side of the head phone. How to fix it!?

    Is that compatible to give output from both sides (R + L) ? Can you check same thing on other system ? 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • TS2771 I can only hear sounds from my ipod touch with headphones plugged in.

    I am only able to hear any sounds/music from my iTouch with the headphones plugged in to it.  I have the change with buttons selected to "on".  Am I missing something else?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Can only hear sound out of one ear in iPod 30gb

    My nephew can only hear sound from one ear of his headphones.
    1) he's not becoming deaf and we've tried multiple pairs of headphones that give the SAME result.
    2) the volume settings are correct, so its not that.
    What are the options here? Is there a known fix? If its a hardware issue, can Apple do anything (free under warranty or repair with charge)?
    Thank you for your help!
    - John M.

    maybe that the file only offers one audio track. have tried other players to play it?

  • I can't hear sounds from my ipad speaker

    I just bought Ipad mini last 2 weeks....since I have bought ...I can not hear sounds from speaker.
    It always shows "headphone" mode....Why?
    Technician tried to restore but not work....What is your suggestion?
    Thank you.

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Can only hear sound through headphones

    i can only hear sounds on my ipod touch through my headphones

    first try plugging and unplugging your headphones at least a dozen times really fast because somtimes the headphone jack sometimes has debris in it. i used to have the same problem.
    if that doesnt work restore it back to factory defaults by going to the setting icon then go to the general bar, after that scroll al the way to the bottom and click reset, then click reset all settings after that if it still wont work do the same thing accept click on erase all content and settings 

  • Why all do videos stop when i maximize them on youtube ? i can only hear sound. It hasnt happened before. It works with other browsers. I wouldnt like to change mozilla.

    I think this happened a couple of weeks ago. I sudden realized that everytime i change the quality of a clip on youtube or simply maximize it the video stops playing .. i can only hear the sound. Trying with different browsers works just fine. Please help

    Try to disable the hardware acceleration in the Flash Player.
    See [[Cannot view full screen Flash videos]]
    * http://www.youtube.com/swf_test.html (right-click the player: Settings)
    Flash "Display settings" window:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

  • Playing back Recorded TV Programs using Windows Media Player and only hearing Sound from Front Speakers

    Hi All,
    I have Windows 7 Ultimate 64-Bit Service Pack 1 with Windows Media Player 11 installed.
    When I click on one of my Recorded TV Programs to watch and hear, I can only hear the Sound coming from the Front Speakers.
    When I right-click on the Program and open it up in Real Player Cloud. I can indeed watch the program and hear Clear Sound coming from all 5 Speakers plus the Subwoofer.
    What setting do I change to use Windows Media Player and have sound coming from all 5 Speakers and the Subwoofer?
    Thank you!
    thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

    Hi Andreas,
    Thanks for the reply.
    The link you put up, takes me to the page, but
    "The requested URL /surround/www_lynnemusic_com_surround_test.wma was not found on this server."
    That was WaterFox.
    The webpage cannot be found
    This in Internet Explorer 11.0
    The Files in question were Recorded by Beyond TV to my Local Hard Drive.
    When I open the recording in Real Player Cloud, installed on my computer, not streaming over the Internet, I hear it correctly played.
    When I use Windows Media Player, nothing can be heard from the Rear Speakers.
    Speakers and Hardware are working fine.
    thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

  • I can not hear sound from my computer. computer model ( compaq evo d 510 small)

    I am hearing a song suddnel my computer sound stoped then i restart my  computer but i can not hear sound. when next day i start my computer sound was playing but when i restart my computer i can not hear sound . iam facing till now this problam

    Hi,
    Download and install the IDT driver on the link below.
    http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46567.exe
    When the installation has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Only hear sound from one speaker

    I have been going nuts trying to find help on this. There were some but not exactly the same. So here is my dilemma.
    I am capturing miniDV footage from my camera (Sony DVR PC 330) and used a Sennheiser MKE 300 Shotgun Video Camera Mike to capture audio. Then I captured in into FCE and also Toast 6. Both only produced audio on the left side. Now I checked the speakers, used headset and it was the same. I listened to iTunes and audio from other sources and both speakers and headset worked fine on both sides. Only bringing in from my camera did the sound from only the left speaker. So it's my camera or external mic. Well, I checked that too and I listened to the tape with headsets and heard everything fine on both sides. So the tape has all the audio. So could it be that the firewire is bad? Or is there something I have overlooked. Last week I imported a CD into FCE and produced a CD of audio that was fine. So the program is not at fault I would think. Any ideas would be great.
    iMac G5   Mac OS X (10.3.9)  

    Panning on audio . . . . .>
    The panning is set all the way to the left and shows -1. But this is the default setting. As when you click the little red (x) it will go to the left. And I just opened another project that works fine and it is all the way left with -1. If I move that sequence it sound less full with not bass or something, it just isn't right. So not sure this is the solution. And now I have to go out of town for a few days so will look forward to any other thoughts you all have when I return. Keep thinking
    Jon

  • HT201401 Only hearing sound from one headphone?

    I only receive sound through one headphone, but have tried different headphones and the same problem exists. Any ideas on fixing the problem?

    (Found this by another user)
    "You simply need a replacement headphone jack. The problem is one of the contacts in your headphone jack (the metal that touches the plug on your headphones) got bent/damaged/etc. Replacing the headphone jack should do the trick.
    You can probably get it sent somewhere for servicing as well. You also have various options of trading it in or selling it, etc.

  • No sound from built-in audio device. I can only hear something from ear set. i checked Mixer ok

    pavilion dv6
    windows 7
    no Sound
    Nothign changed since I bought the machine on May 2011

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the appropriate method.

  • HT4061 My screen will not turn on at all. But i can still hear sounds from when i would hit the home button. How could i get my iPhone to turn on?

    The screen to my phone will not turn on at all. I could hear the sound it makes when I do press on the home button. But the screen is not and will not respond and turn on. I plugged it in the charger to see if it'll do anything, but that didnt do anything. So I plugged it in the charger to my computer and even that didnt help with the situation. So how can I get my screen to turn on?

    See Here for  >  Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Can't Hear Sound From Flash

    I go to sites such as youtube or any other video place and the video plays but their is no sound. I went through all the troubleshooting that Adobe had and I still have the problem. My sound works fine in IE though, just not Firefox and also flash player crashes. Not too sure what to do.

    That's great kar3b3ar.
    When you get good answers to your questions you have two options. You can give the person a solved or a helpful.
    They get points towards their status level. The more people answer questions and help others the higher level they have.
    So if you would like you could give the one who answered your question a shout-out by giving him a helpful of solved.
    Enjoy the forums. I use it frequently for my problems.

  • I can't hear sound from my mac book pro

    i have tryed multiple of time today and i cannot fix this problem the sound is not working at all no matter if its through itunes, facebook and others

    http://www.ifixit.com/Answers/View/8797/Audio+jack+problem,+no+speaker+sound,+re d+light

Maybe you are looking for

  • Could not set host credential in EM for my windows vista laptop

    I am using Vista and try to use Host Credential in EM, but when I entered my username and password( for operating system), EM always show me wrong username. I searched from google, some people suggest: 1. Control Panel, Administrative Tools. 2. Click

  • Can't install acrobat because adobe think i I download the application

    can't install acrobat because adobe think i I download the application

  • Journal for Equity Method

    P owns 30% of S1. (using equity method) Investment = 30.000 USD Equity of S1 = 25.000 USD S1 owns 70% of S2. (using purchase method) Investment cost = 50.000 USD Equity of S2 = 30.000 What is the journal of first consolidation in group S1 and group P

  • Adding 7906 to CCM 4.1(3)SR3B

    I am trying to add a 7906 into our environment but the 7906 isn't in the "Add Phone" drop down list, has anyone else this? I have run cmterm-7911_7906-sccp.8-0-4SR1.exe on our callmanagers but it doesn't change the list.

  • SAP 8.8 PL13 - Client keeps getting Configuring Client dialog box

    Hi all, We have 2 installation of B1 8.8, PL11 and PL13 respectively. At some of the workstations, once user login to B1 client, there is a box pop-up that says "Please wait while Windows configures SAP Business Client". The progress bar below will s