Help! I can only print small thumbnail sized prints - won't size correctly

Recently I tried to select a photo and print it to my HP officejet 6310. I am trying to use photo quality paper sized 8 1/2 x11 and print either one or two photos per page, either 4x6 or whatever will fit. I have tried many different ways to select the correct sizing, but no matter what I do all that iphoto will print now is a tiny thumbnail in the upper left corner, about 1 1/2 x 1 inch. It shows this in preview and prints this. I was not having this problem before, it might have started after a recent security update but I am not sure.

Are you sure the problem is with iPhoto and not with the Printer Driver? I went on the HP site (have you tried that?) and they have some experience of problems with both OS X and iPhoto. There are quite detailed instructions for uninstalling and re-installing the drivers here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00501015&cc=uk&lc=en&dlc=en &product=1119598&dlc=en〈=en
It is also worth checking the site for a later version of the drivers.
Also, there's a document of trouble shooting colour printing, and it might be worth using the same steps for you issue as it refers to a specific setting for iPhoto in the print dialogue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpm30117&lc=en&cc=uk&dlc=en& product=1119598&rule=34407〈=en
Regards
TD

Similar Messages

  • Fonts in Help Center can only made smaller

    I've recongnized that in the Apple Help it is only possible to make fonts smaller (ctrl + '-'), if one tries to make them bigger again, (ctrl + '+') fails.
    the only way is to close the Help and open it again.
    any suggestions? is the failure reproducible for other users?
    These shortcuts are fully operable e.g. in TextEdit
    used system: OS X 10.10.3 (14D136), German language

    GWW --
    According to Kurt Lang, these are the most important fonts that have to be in your HD>System>Fonts folder for all versions of OS X:
    Courier.dfont
    Geneva.dfont
    Helvetica.dfont
    Keyboard.dfont
    LastResort.dfont
    LucidaGrande.dfont
    Monaco.dfont
    Look at that folder, but don't TOUCH anything . . .
    Let us know what you find, OK?

  • I need help.  Can LiveCycle PDF Generator accept network print jobs from a PCL only source?

    I need help.  Can LiveCycle PDF Generator accept network print jobs from a PCL only source?

    More information about this game:
    The game should generate a random obstacle course for the player. The first column of the grid, however, should consist of all empty pieces, with the exception of the upper left-hand corner, which is the grid location where the player initially resides.
    Enter a loop in which the following things happen (not necessarily in this order):
    Print the current board configuration. Additionally, a key should be printed describing what each piece is.
    Get an action from the user. The player can move up, down, left, or right. Use the following controls: up = 'i', down = 'm', left = 'j', right = 'k'. The player can move at most one block at a time. Of course, if the player tries to move into a spot occupied by an immovable block, the player will not move.
    Inform the player whether they have won, or if they have lost (a player loses if they step on a bomb piece).
    If the player types 'q', the game should terminate.
    I am still stuck on this maze generator stuff.... Please help me....

  • Help I can only have max. 3 osx apps. open at the same time ?

    Help I can only have max. 3 apps. open at the same time ?
    If I have 3 apps. open, and try to open a 4th. this message comes up :
    The application "Mail" cannot be launched. -10810
    Of cause if I'm trying to open up something else than mail, lets say iPhoto, it will say "iPhoto".
    This is very weird to me, and I'm normally pretty good at solving issues myself, but I'm stuck with this one.
    Please help out

    I've had this quite a lot too. Do you find that under these conditions you can't load a disk image either?
    At first I put this down to Rosetta taking up a lot of resources. I was running OmniWeb with a lot of pages open in the workspaces so I've switched back to Safari until OmniWeb is UB. This morning I read that having Windows file sharing switched on helps to cause this problem. I switched this off, rebooted and ran disk utility to repair disk permissions and I've been running OK since then. I've currently got 13 apps open plus Finder and Widgets. They include 2 bigguns, Eclipse/MyEclipse and Visual Paradigm for UML. It'll probably stop working now I've written that.
    I run a MBP 17 with 2GB memory. My guess is that Windows file sharing does cause problems. I just hope Apple has resolved this in 10.4.7... whenever that is.
    Gareth

  • Help; I can only synchronize parts of my iPhoto library to my iPad.

    Help; I can only synchronize parts of my iPhoto library to my iPad.
    When I connect my iPad to my iMac using iTunes, I am not able to synchronize all of the library. I have marked off All pictures, events etc., but it only synchronize parets of it. I have plenty of available space, so it is not that.
    Can anybody help?

    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for the iPod Photo Cache.
    Trash it. Start iPhoto and try sync again.
    Regards
    TD

  • TURBOTAX 2014 CD DOES NOT PERMIT OFFLINE PRINT OR SAVE TO PDF.  YOU CAN ONLY SAVE TO PDF OR PRINT IF ONLINE.  BIG SECURITY ISSUE.  INTUIT IN WSJ ARTICLE BLAMES APPLE, SAYING APP STORE SOFTWARE RESULTED IN THIS.  TRUE?

    Starting this year, Turbotax CD/download versions will not permit people to print tax forms when offline. If you try to print while not connected to the Internet, you receive the warning “There was a problem connecting to Intuit’s Secure Print Service.  Please check your Internet connection or try again later.”  Indeed, Paragraph 9 of the Intuit Software End User License Agreement states:  "You may save your return as a PDF file and understand it may be processed on Intuit servers, not as part of the Software."
    Even if you wish to protect your data by not exposing it to the Internet, Turbotax will not let you without sharing your entire return first with them.  They prohibit you from only printing locally on home, cable-connected printers.
    The result of this is that people who tried to be safe by never going online with tax data, are this year being forced by Intuit software to expose all their sensitive tax information files to the Internet and Intuit print server, even though they do not wish to. Turbotax is putting you at risk.
    On Feb 19 the Wall Street Journal quoted an Intuit spokesperson blaming Apple:  According to Julie Miller, an Intuit spokeswoman, TurboTax made the change “because the Mac product requires a special, third-party code library to support offline printing.” And she says, “based on Apple App Store guidelines, we could no longer distribute the third-party library with our software.”   She said the change in the TurboTax Mac software was first made for 2013 tax returns, but last year customers had the option of printing returns without being connected to the Internet.
    So is Apple to blame that I now have to expose my sensitive tax data to Intuit just to be allowed to save to PDF on my hard disk?  And it's all Apple's fault?
    Can anyone clarify this?

    Thank you for this an the other posts.  Particularly for Barney,
    I have just discovered that Turbotax actually permits you to print (and save to PDF) documents from the Help
    Center built into the program, even when you are OFFLINE.  Works just like normal printing is supposed to.  It just won't let you print actual tax forms. So I guess they were willing to violate Apple’s rules when you print information from their help center offline, but you just can't do the same with your own tax forms.  Clearly this shows that what Intuit told Forbes was a fabrication.
    They do in fact have the proper code in the program for printing and saving to PDF.  They just deny you usage of that code for printing your tax returns, which they want to copy.  I don’t think there can be any doubt about what they are doing.  Surely they are not deceiving apple by allowing the limited print function?
    We can only hope that a brave journalist will challenge them on this, since Intuit will not respond to customers.
    Thank you for any views on this points.

  • Help I Can only hear sound from my juke b

    can anyone help me i think i screwed up my computers sound and i dont know how. I can only hear sound from musicmatch jukebox when i play a song. i cannot hear sounds from any of my games or othe applications. please help me!

    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth. 
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.

  • Can only send small mails

    Here is my problem - I can only send very short mails with a few words (size 0.0 or 0.1 Kb). If the mail is at a normal size, the mail starts to send, the mail activity ticks down to 0Kb, but then the little circle just keeps spinning around, and the email is not being delivered.
    I am using the mail program in mac, and have tried with entourage. Both have the same problem.
    After a minute it pops up with a message "cannot send via the server". I click on "help to cennection", and then it shows that status is ok and there is connection to my server.
    I can use the same mailserver on my win-pc without any problem. I have checked the ports numbers for my mail servers on my mac-mail-program.
    Has anyone expierenced this problem? Has someone a solution?

    Hi Timmy and Ernie and everybody else
    I have tried the things you have mentioned, check/uncheck ssl, check the ports, cable to router and back to wireless (yes i am using wireless).
    I set up the accounts from scratch. Maybe i have a certificate problem. It shows to two certificates - "UTN-USERFirst-Hardware" this one is OK, but underneath i can see "*.arrownet.dk" and this one is not valid. Arrownet is my internet-provider, and my outgoing smtp-server is named "smtp.arrownet.dk". It checks the servers after i have typed the info for POP-server, but i figure i might have a problem here.
    I have talked to arrownet, they know not of the problem. And again, it works perfect on my win-pc. Think i am about to try an older version of mac os-x, could that maybe solve my problem?
    henls

  • Bad quality of 4x6 prints, but thumbnail's print looks good

    just got a order back of 250 photos. most were taken by a pro photographer. I would say 60 of the photos were unacceptable. Highlights were blown out and colors were way off. I am curious why the problems weren't the same. In a series of the same photos some aare to dark, some are tinted...it is crazy. What is even stranger is the fact that the proofs(thumbnail) were printed on a 8x10 sheet and they looked perfect. Why is there a difference between the proof and the final print? I just want a answer or another option for printing because i am tired of being disappointed in these prints.

    Zach:
    What color profile did the professional's files have? I believe sRGB is used by the photofinisher for Apple. If you're had the Adobe profile that may have been the cause.

  • Help please can only print grey

    i am using a canon bjc80 which when i test print it prints all colours and black
    but when i print from pages or even word every thing is printed in grey i cannot find what i am doing wrong any help please
    thanks in advance

    You didn't say, so I'll ask - have you looked at all the options in the Copies & Pages pull-down menu?

  • Can only get last array to print........

    Hi again, the novice programmer here...
    Below is my code. The goal is to print each toy and the only toy that is printing is the last one.....and it's printing 5 times on my screen! gggrrrr.
    Any help is welcome.
    public class ToddlerToy {
         public static int ProductID;
         public static String ProductName;
         public static float ProductPrice;
         public static String ProductSale;
         public ToddlerToy(int id, String name, float price, String sale) {
              ProductID = id;
              ProductName = name;
              ProductPrice = price;
              ProductSale = sale;
         public static void DisplayID() {
    //          System.out.println("This is method DisplayID of class ToddlerToy");
              System.out.println("\nID = " + ProductID);
         public static void DisplayName() {
    //          System.out.println("This is method DisplayName of class ToddlerToy");
              System.out.println("\nName = " + ProductName);
         public static void DisplayPrice() {
    //          System.out.println("This is method DisplayPrice of class ToddlerToy");
              System.out.println("\nPrice = $" + ProductPrice);
         public static void DisplaySale() {
    //          System.out.println("This is method DisplaySale of class ToddlerToy");
              System.out.println("\nSale = " + ProductSale);
         public static void DisplayToy() {
              System.out.println("This is the method DisplayToy of class ToddlerToy");
              DisplayID();
              DisplayName();
              DisplayPrice();
              DisplaySale();
    /*     public static void main(String[] args) {
              System.out.println("This is method Main of class ToddlerToy");
    public class ToysManager {
         public static void main(String[] args) {
              System.out.println("This is method Main of class ToysManager");
              ToddlerToy [] myarray =new ToddlerToy[5];
              //Create 5 train objects
              myarray[0] = new ToddlerToy(1,"Big Train",19.95F,"");
              myarray[1] = new ToddlerToy(2,"Big Train",19.95F,"");
              myarray[2] = new ToddlerToy(3,"Small Train",12.95F,"");
              myarray[3] = new ToddlerToy(4,"Big Train",19.95F,"On Sale!");
              myarray[4] = new ToddlerToy(5,"Small Train",12.95F,"On Sale!");
         for(int i = 0; i < myarray.length; i++)
               myarray.DisplayToy();

    the only toy that is printing is the last one.....and it's printing 5 times on my screen!The problem here is not only that the fields in ToddlerToy are static, but the methods are static as well. Remove all the static modifiers (except from main) and you should see the desired behavior.
    The static concept can be a bit tricky at first, so if you don't understand it, don't use it (except in main, which has to be static).

  • Application And Gaming / Port Forwarding || HELP NEEDED || Can Only Access Via LAN

    Hi.
    I have just bought a Wireless Router, Model Number: WGKPC354G-UK. With the intention of setting up a small server. This server will run from my PC (directly wired into router), running a game called "Counter Strike" - I had to download a dedicated-server tool for this and i successfuly installed this and followed the tutorial to set it all up..
    So I thought i had done it, but I could only access my server with my internal IP 192.168.1.64 (LAN).
    I then found out that i needed to "Port-Forward" I followed a tutorial on www.portforward.com - This showed me how to open the ports, and which ones to open.
    I did all this and i still encounter the same problem !
    So i then opened all my router ports "DNZ" and it still doesnt work !!!
    Any help will be greatly aprreciated !
    PS. Below Are The Required Ports.
    http://portforward.com/english/routers/port_forwarding/Linksys/WAG354G/Counter_Strike.htm         

    Keep in mind your ISP could be blocking the ports needed. DMZ almost ALWAYS works and if it doesnt, most likely your ISP blocks the ports.
    another test is to make sure you can connect to the game server from another CS machine on the inside of your network. If this works, that means your server is up and running properly and its probably your ISP blocking certain ports needed for the CS Server.
    You should also check you have the Windows firewall disabled, and any other software firewall on your server disabled.

  • Help! can't see CR2 thumbnails In Bridge

    what can I try?
    I cannot see the thumbnails in Bridge but can go into CS4 and open them up no problem
    I shoot Canon 5d Mark II
    I downloaded Camera Raw 5.3
    works fine for my regular 5D but no on the new Mark II
    any suggestions?
    thanks!

    Hi - Joan's husband here (I built the computer hardware for her, but don't
    really know Photoshop that well). I did a search for "camera raw" files and
    found a second instance located in the adobe/common files folder (not in
    program file subfolders as the proper plugin is located per instructions).
    It was the 5.0 version, and I could not do anything with it, eg delete it as
    it "was in use by a program", even though I had no prgrams open. I was able
    to rename it to "old camera raw 5-0", and I copied the new camera raw 5.4
    version into that folder. I rebooted and now had 3 camera raw plugins
    appearing in CS4/hlep/about/plugins drop down list.
    I then went back into the common file folder and was able to delete the old
    camera raw file. I now have two camera raw files appearing in the
    help/aboutplugins dropdwon, but they are both the same 5.4 version. Now I am
    able to see a selection to generate a high quality thumbnail for the cs2
    files in Bridge when I right-clicked on those, and this generated the
    thumbnails for all of those file types. All is well now (I hope !!), thanks
    for your input and advice.
    I did purge the cache, but that didn't change anything as far as I could
    tell. Also, the 5.4 update doesn't show the Canon 5D Mark II on the list of
    updated cameras for this revision, so I don't think it is a necessary update
    for this specific camera, but probably good to stay current.
    If this was an "end-run" around a proper fix then I would like to know the
    proper way to resolve this.
    Best Regards,
    Jeff Sutton
    Joan Sutton Photography
    6 Longmeadow Lane
    Medway, MA  02053
    508-533-1371
    www.joansutton.com

  • Help, I can't view my thumbnails

    Hi, I am operating iphoto 6.06 on my 2006 imac. Somehow I must have hit a button but I can't seem to view my photo library in a thumbnail grid anymore. Each photo shows up individually on the screen and they are a large size(as if you have double clicked the thumbnail). It's such a pain to scroll through my library this way. Does anyone know how I can revert my library back to viewing several photos at once? Thanks for your info:-)

    Hello...I have the same problem but the sizer did not help me....when i first opened the iphoto it asked me to rebuild the library...i did. Now i can see each image individually but my thumbnails are blank. Can you please help me out??
    Thanks.

  • HELP I can only see myself

    When I use ichat on my MBP 2.16 2GB 100GB with the built in isight, the other side (on an MBP) can see me, but I can't see them, i only see me.

    When I use ichat on my MBP 2.16 2GB 100GB with the
    built in isight, the other side (on an MBP) can see
    me, but I can't see them, i only see me.
    HELP PLEASE??

Maybe you are looking for