HELP! I can't make it loop...

I have made a header with images that fade in/out for a site that I am designing. I have a preloader on there with the following code:
All of the preloader images and script are on the first frame, with the content starting on the second frame with the action "play();" so that the fade will start. Everything works beautifully - except that I can't loop it for the life of me! I am a newbie to flash... I published the file with the "LOOP" checkbox checked under the html tab in the publish settings and placed loop parameters in the html of the site, but to no avail.
Can anyone help me out there?? This is kind of urgent and any suggestions would be totally appreciated!

I'm trying to loop the images - right now, the images play through and then end with the loading rectangle.

Similar Messages

Help! can't make or receive calls from 5800

have just brought a new nokia 5800. insert my sim. and it wont let me receive or make any calls. yet i put sim into a new 5530 and it works straight. have also tried other sims and wontlet me do anything.
i can connect to the wifi but that is it
any suggestions??

Hi hoooopsa
I am sure that you have already checked under profiles that it is not set to "Offline"?
Happy to have helped forum in a small way with a Support Ratio = 37.0

A call for help! Can I make my master my slave?

Hi, friends. I hope these few words find you in good spirits.
I am trying to recover data from about 10 years of my life, and I am hoping one of you will point me in the right direction.
I have an old Power Mac G4 tower (Sawtooth, AGP from about 2000). It has two hard drives: the original, a 10 GB drive in the master position, and a newer 80 GB Seagate in the slave position. The original drive is running OS 9.2.2 and the Seagate is running 10.3 (Panther). Right now it is booting off the original drive. I'd like to boot it off the Seagate, if I can.
First, my question: may I safely and correctly swap the two drives, or just the cables, so that the Seagate drive becomes the 'default' master drive?
Now, the problem, which is knotty and may indicate hard drive failure:
I last booted the computer two years ago, and at that time, both drives worked just fine. Now I am trying to retrieve all my data to a new external drive, and wipe the old Power Mac clean. That data represents a fair bit of my personal life, and I am willing to do just about anything to retrieve it.
Now I cannot get the master drive (OS 9.2.2.) to boot all the way. I booted it with extensions loaded, and I get to the desktop photo and the time (the correct time) in the menu bar, but then the process seems to stop. The hard drive does not appear on the desktop, and although the cursor is not frozen, there is nothing to click on. Then I booted it with extensions off, and again I reached the same place (desktop photo, correct time).
I do not have the startup CD with me. I tried to boot the machine with my OS 10.6 disk (holding down the 'c' key), but the OS 9.2.2 loaded. I tried that twice.
Then I tried to access the original hard drive in target disk mode. The yellow moving 'TDM' symbol on the original computer's screen is visible, but no hard drive icon appears on my laptop (Intel, 2008, 10.6.8). I tried Disk Utility, and then TechTool Deluxe, but nothing appears in either of them. So I cannot access the hard drive in order to try a software repair, or to change the startup drive.
I am hoping that the Seagate slave drive is working -- that has almost all of my data anyway -- and that I can get it to boot if it is in the master position. If you savvy and experienced people say that I can swap them, then I'll give it a shot.
If you have any better suggestions, I am willing to follow those too. I am running out of things to try!
Thanks in advance, and peace,
Charles

Hi BDAqua,
And thanks for your prompt help. I like the idea of using the cable to connect my two old hard drives directly to my laptop. I am unfamiliar with the cable, however, and I have three questions:
1. Will it come with instructions for use?
2. It looks like I simply remove the hard drive and connect it to the USB port on my laptop. Why then do I need to set the drive to master? (I installed my second hard drive about 8 years ago, and I no longer remember the significance of master/slave.)
3. If I am very careful -- and I am -- are you fairly certain that I'll not fry my hard drive?
If you cannot help me with these questions, or are too busy, please know that I am grateful for your help.
Peace,
Charles

HELP: how can we make BPEL PM more developer friendly

Hi All,
With the new year starting, one of our resolutions for 2005 is to enhance the developer experience for BPEL PM and we are looking for suggestions and help in prioritizing them. Given that some of you guys have kicked the tires, you are the best source for those suggestions. I hope that you guys will be vocal.
We are interested in the end to end experience: OTN, Download, 1 st hour, documentation, product development, console, this forum, anything else that is part of the overall experience.
If you do not like to post, please just send me an email.
Thank you!
Edwin
VP Product Development
Oracle BPEL Process Manager
[email protected]

Edwin,
I might have several suggestions as I'm sinking my teeth into the PM Server and Designer. We're considering to use the BPEL technology in the BIG way.
First of all, make it a bug-free (as much as possible). Let me describe to you what I believe is a bug or a flaky design. In the Designer, File>New>Oracle BPEL Project creates a new project with a file bpel.xml. For example, look at your CreditFlow sample. In that file there is <partnerLinkBinding name="..." <property name=wsdlLocation"> http://<host name of the WSDL host server>/....
when the partner WSDL is hosted on the localhost that <host name> in the line above is the name of my machine instead of 'localhost'. Then, <project name>.bpel validation crashes when you're in the off-line (disconnected) mode or connected via VPN gateway (since obviously you think you don't need a proxy because everything is local). But, even if it works inside the LAN I think it's a bad design; since it's generated automatically by Designer the developer doesn't have a clue what's wrog when he/she needs to debug your code. The Designer should stick there 'localhost' instead of the the name of my computer on the network.
Here how I spotted it. I generated you CreditFlow sample in the Quick Start Tutorial. I went by the book, Compiled the CreditFlow.bpel and it crashed! The book did not say it was supposed to crash. The book said everything should be honky dory. The Validator printed a message: "connection timeout...." Since I'm new to the BPEL it took me awhile to figure out and once I stick 'localhost' in the right place in bpel.xml everything worked. Again, I was running everything on localhost.
So, I think it's a bug at worst or a flaky design at second. What am I missing here?
The problem is that if my company wants to convert the Biz Analysts into BPEL modelers how could a BA figure out the solution to the problem like this? He/She would just give up and tell the Technologists (us) that this is a bad product.
Thanks,
Greg
P.S. What happened to Doron Sherman (CTO) and the old Collaxa folks? He is not listed in the ORCL directory. For those who don't know BPEL Server and Designer were developed by Collaxa and ORCL bought that company last year.

I have dvd video linked, how can I make it loop on a chapter?

I have the video playing using the code below...I simply want
the same chapter to loop when it gets to the end. Any help would be
greatly appreciated!

No way to recover it unless the other person didn't delete it on their end but the Perfect time to activate iCloud Drive and you won't ever need to worry. If you set it up correctly.

How can I make a loop similar to this song?

http://www.youtube.com/watch?v=sdpT3p2831g
I just want to get the drum beat down but i'm having trouble with this. Can anyone help?

Add a calendar entry with an alert to your shared calendar. I'm assuming it is shared via iCloud, MS Exchange or Google, so it will update in near real time and not have to wait for a sync.

Please help! Can't make commas (thousands separator) appear in numbers

I open Pages. I type in a number (123456). While cell is still selected, I open Inspector and select Cell Format = Number. I then check the Thousands Separator checkbox. It does NOT put commas in my number.
Any help greatly appreciated!

A couple of thoughts:
First, make sure you have US formatting as the default for numbers (not the program Numbers) in System Preferences > International > Formats.
In the table inspector click on Format & make sure the cell is formatted to number & press Enter/Return/Tab to move out of the cell & see if it "takes" then.
If none of that works, it could be corrupt preferences. Quit Pages & then delete the com.apple.iwork.pages.plist file found in HD > Users > (your account) > Library > Preferences.
Fruhulda,
The thousands separator in the US (where the OP is) is a comma & the decimal is a period/full stop/dot.
Message was edited by: Peggy

Help: how can i make fresh download of ios5, having one already installed on my iphon4 4?

Hi
since ive installed ios5 on my iphone, 4 two days ago im having a lot of problems like activating imessage, reminders does not appear on lock screen, missing adress book buttons, etc...
i would like to download the ios5 again from apple servers, but i am not able to download it because the itunes says that is the latest version.
can anyone help me?
using win7
thanks in advance
hemal

Plug your iPhone into iTunes - and press Restore
OR
On your phone, go to Settings->General->Reset->Erase all Content and Settings

Help! Can anyone make sense of these system errors?

My MacBook Pro has been crashing a lot. I've done four erase and installs. It's fairly stable now (i.e. I am crashing a few times a day, if that, as opposed to every time I boot up). Any thoughts on these errors that are showing up in my system log...and how do I fix them? (Or do I have one of those infamous busted logic boards?) I've installed 2 gigs of 3rd part RAM that checks out as OK when I run the hardware test off the install disks.
Thanks in advance.
kernel[0]: AppleYukon: error - Uncorrectable PCI Express error
kernel[0]: AppleYukon: 00000000,00000000 skgehw - cppSkDrvEvent - SKDRV_ADAPFAIL
kernel[0]: (59: coreservicesd)tfp: failed on 0:
SystemStarter[283]: The following StartupItems failed to properly start:
Jul 29 11:14:10 localhost kernel[0]: hi mem tramps at 0xffe00000
Jul 29 11:14:10 localhost kernel[0]: PAE enabled
Jul 29 11:14:10 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jul 29 11:14:10 localhost kernel[0]: vmpagebootstrap: 513263 free pages
Jul 29 11:14:11 localhost kernel[0]: migtable_maxdispl = 71
Jul 29 11:14:11 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jul 29 11:14:11 localhost kernel[0]: 86 prelinked modules
Jul 29 11:14:11 localhost kernel[0]: ACPI CA 20051117 [debug level=0 layer=0]
Jul 29 11:14:11 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jul 29 11:14:11 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jul 29 11:14:11 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jul 29 11:14:11 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jul 29 11:14:11 localhost kernel[0]: using 5235 buffer headers and 4096 cluster IO buffer headers
Jul 29 11:14:11 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
Jul 29 11:14:11 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 0:23
Jul 29 11:14:11 localhost kernel[0]: Started CPU 01
Jul 29 11:14:11 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jul 29 11:14:11 localhost kernel[0]: Security auditing service present
Jul 29 11:14:11 localhost kernel[0]: BSM auditing present
Jul 29 11:14:11 localhost kernel[0]: disabled
Jul 29 11:14:11 localhost kernel[0]: rooting via boot-uuid from /
MacBook Pro Mac OS X (10.4.7)

Thanks for the reply. I'll deal with the RAM first, as I shudder to think about sending my laptop in for a CPU change. Do the rest of the errors seem RAM related?
Funny story...I actually got this MacBook Pro for free from Apple because they tried twice to fix the hard drive on my Powerbook and couldn't get it right. You can imagine how thrilled I am to be having problems again. I've only had this machine for a month...

Help - How can I make this effect?

Hey guys,
im kinda new to photoshop and i've bin playing around with stuff, i saw these 3 pictures on the site and i like the effect that they used for the backgrounds.
could anyone tell me what effect(s) the person who made this used? (i'd like to create a copy of them just for personal learning)

Hi there
there are a huge number of sites with tutorials
for example
http://www.photoshopstar.com/
http://photoshoptutorials.ws/
you can find more withh google
In your case try to find tutorial about "Wonderful backgrounds"

How can I/Can I make Firefox the default .PDF viewer in Windows 7?

For the basic PDF viewing I do, Adobe Reader is just slow and annoying. I love using Firefox, but unfortunately I cannot set it as the default program to open PDF files. Even when I select Firefox after right clicking and select open with, Windows does not comply. Is there a config option I can change that will allow me to set Firefox as the default PDF reader.
Thank you for your help.

You can not make Firefox the default for viewing PDF files for the entire Windows Operating System, only the default viewer from within Firefox. Like when PDF files that are downloaded from websites and displayed in Firefox; you can try using '''File > Open File''' from within Firefox to view PDF file that are already saved on that PC, but I'm not sure that will work - I haven't tried doing that.

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3
I got corrupted bluetooth module on my ROM (hard reset does not help ).
Can anyone make backup *after[if you can]* hard reset and send it to me?
Please make link to rghost.ru or dropbox :3
Post relates to: Tungsten E2

Hello everyone! Can anyone make backup with NvBackup from his Tungsten E2 and send it to me, please? :3
I got corrupted bluetooth module on my ROM (hard reset does not help ).
Can anyone make backup *after[if you can]* hard reset and send it to me?
Please make link to rghost.ru or dropbox :3
Post relates to: Tungsten E2

Noob question: How do I make a loop of frames?

So I'm trying to make an walking animation but I don't want to move a symbol in motion tween for each part of the leg each time. So how can I make a loop of it? Thanks!

I'm trying to like, idk how to explain, like for example if I animate animate 1 second of walking, but I want to have 60 seconds of walking and I want an easier way of repeating the same walking sequence, how would I Do that? I can't end the layer or else it blanks out.

How can I make Picture frame my automatic lock screen

I would like to be able to set up my iPad 2 so that when it's locked in the dock, it will automatically start picture frame isntead of having a still picture for the bacground. Is that possible? Thanks for the help!

Can't make it automatic, but it's just two clicks away: Home button, then the flower icon button next to the unlock slider.

I have recently purchased an iTunes gift card to make purchases in my favorite game but for some reason I can't make in app purchases. Someone said that I have to have a credit card but I don't want one of those. Can someone help?

I bought an iTunes gift card to purchase certain things in my favorite app. Well when I try to buy things inside the game it does not give me the option to approve the purchase and it never shows up. I have reset the app, I have deleted the app and downloaded again, I have turned my ipod off and on, I have made sure all updates are up to date and nothing has changed. I saw a similar question like mine and the answer was that you have to have a credit card linked to your iTunes account to make in app purchases and I was thinking they were right until I talked to a few friends who cancelled their credit cards and took them off of the account and can still make in app purchases so that can't be the issues. Can someone please help me this is driving me crazy I have talked to iTunes support but they weren't much support.

Not clear what you mean by iTunes help. You can contact iTunes support by:
Apple - Support - iTunes - Contact Us

HELP! I can't make it loop...

Similar Messages

Maybe you are looking for