HELP! I can't set up my airport express

I just bought the airport express yesterday and was very excited to get it because we go away alot. I tried setting it up and thought I was doing great until it said I have the wrong server name
I had a few questions
What is a server name
and what password do I use
after I did all of this it took me to a different screen, so I was just wondering how you would get back to the original screen.

I have my my express hooked up to my bellsouth modem. I have tried to return it to the factory settings and that didn't work. I have read the manual briefly.

Similar Messages

  • How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly

    I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
    Thanks

    No more meseges.
    في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
    New discussion activity
    Bob Timmons has posted in the AirPort community.
    How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
    Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
    A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
    You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
    We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
    https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
    To post a reply, go to the discussion in Apple Support Communities.                                                             
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

    I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

    The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
    Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

  • I CAN'T SET UP MY AIRPORT EXPRESS!!!

    So... I open airport utility... It detects my airport express(with difficulty)... I set up my airport express to join a network(WPA) and when I press update... It starts updating but at the end it says it couldn't find the apple wireless device..
    I tried so many times- I reset my airport ; I restarted my router(HUAWEI HG655b); etc.
    PLEASE help!
    Thank you a lot in advance!

    HellO:
    I suspect you have some sort of password/security issue with yoru router.
    Barry

  • Can't set up new Airport Express

    My old Airport Express dies so I buy a new one. I use the Airport just for connecting to my stereo for itunes etc. Plug it in right by the computer and get the flashing amber light. Go to the set up assistant and choose 'Set up a new Airport Base Station' and get the message 'No new Airport networks were found'.
    I also have a separate Netgear network to connect with my laptop. This set up is connected to the cable box then to the computer via ethernet. No problem with this.
    The problem seems to be that the old and/or new Airport Express station does not connect with the Airport Extreme card in the computer. At least it seems the computer doesn't see the Airport Express even though it is right in front of the computer. When airport is on the icon shows strong broadcast signal.
    Anyone have a clue?

    Thanks for suggestion - but. Connecting direct via ethernet gives exactly the same results. Computer doesn't see Express therefore there is nothing to configure. I am at a total loss and about to give up. Maybe there is another product that would be compatible with Mac that I could try. I guess it is also possible that the new unit is also bad.
    I have a love/hate relationship with computers and right now the hate side is taking over. I hate it when things don't work.

  • Can't set up "older" Airport express as booster for "new" Airport network?

    I upgraded to a new airport express (the 802.11n) and want to use that as my primary airport in my house. I have an older airport express that keeps giving me error setting up as a WDS when I reinstall the factory settings to set it up as a booster. Is this an impossibility or am I just missing a step? Thanks.

    I was having trouble having the network name show up in the which-network-to-join window. It would be blank and then give me that error message.
    In a WDS configuration, you do not use the "join an existing wireless network" options.
    The following are the basic steps:
    (Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. Also, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
    Main Base Station Setup - 802.11n AirPort Express Base Station (AXn)
    o On the Mac click the AirPort status menu in the menu bar, and then, choose the wireless network created by the AXn.
    o Open AirPort Utility; Select the AXn, and then, choose Manual Setup from the Base Station menu.
    o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
    o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
    o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
    o Click the Add "+" button and enter the AirPort ID of the AX.
    o Click Update to send the new settings to the base stations in the WDS.
    Remote Base Station Setup - 802.11g AirPort Express Base Station (AX)
    o Click the AirPort status menu in the menu bar, and then, choose the wireless network created by the AX.
    o Open AirPort Utility; Select the AX, and then, choose Manual Setup from the Base Station menu.
    o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
    o Click WDS and choose “WDS remote” from the pop-up menu.
    o Enter the AirPort ID of the main base station in the WDS Main field.
    o Click Update to transfer the settings to the base station.
    (ref: Pages 42-46 of "Designing AirPort Networks.)

  • How can I set up my airport express to extend my current wifi network? My current network does not use any airport device.

    Can anyone help me?

    The only option would be to connect the AirPort to your existing network by wire. Most, if not all non-AirPort routers, will not be WDS compatible.

  • Can anyone tell me how to change the names of the networks I have set up on Airport Express

    Can anyone tell me how to change the names of the networks I have set up on Airport Express please? I now work in a UN compound and my network is my own name, would prefer some anonymity so seeking to change the wifi network name that others might see.

    Hi mkl1961,
    Happy Holidays!  The article below will explain how to reset your Airport Express and change the network and base station names back to their defaults.  
    Resetting an AirPort base station FAQ - Apple Support
    http://support.apple.com/en-us/HT3728
    What default settings will my AirPort base station have after a hard or factory default reset?
    AirPort base stations are set to request an IP address by DHCP.
    AirPort base station passwords are "public."
    AirPort base station names revert to "base station xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
    AirPort base station network names are "Apple Network xxxxxx," where xxxxxx is the last six digits of the wireless MAC address*.
    *A MAC (Media Access Control) address, also known as a "network ID," is a unique hardware identification number for a network port.  You can find the wireless and Ethernet network IDs on the printed label on the bottom or side of the device.
    Airport Express Setup Guide
    manuals.info.apple.com/MANUALS/1000/MA1613/en_US/airport_express_80211n_2nd_gen _setup_guide.pdf
    I hope this information helps ....
    - Judy

  • How can I set up the airport extreme base station with windows computer

    how can I set up the airport extreme base station with windows computer

    Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547  to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

  • I did set up my Airport Express to extend my existing network. It did ok but I can't see the name assigned to the Airport Express name in my available networks. Is that normal?

    I did set up my Airport Express to extend my existing network. It did ok but I can't see the name assigned to the Airport Express name in my available networks. Is that normal?

    If the AirPort Express is extending your network it is using the same wireless network name as your "main" router.
    Your main router and the Express act like one "big" network now.
    Your computer will connect to either the main router or the Express automatically....depending on where it sees the best signal.

  • I can not set up my airport extreme, he's worked over the internet but I can not back up

    I can not set up my airport extreme, he's worked over the internet but I can not back up

    ''donngra [[#answer-685379|said]]''
    <blockquote>
    ''FredMcD [[#answer-685331|said]]''
    <blockquote>
    Your System Details shows;
    Installed Plug-ins
    Shockwave Flash 15.0 r0
    Shockwave Flash 11.5 r502
    Having more than one version of a program may cause issues.
    Grab the uninstaller from here:
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
    '''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
    Then reinstall the latest version.
    Flash Player '''v16.0.0.296<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
    Shockwave Director '''v12.1.6.156 http://get.adobe.com/shockwave/'''
    </blockquote>
    </blockquote>

  • I have set up my airport express to play music on my tv.  However, I can only stream music to it via "music" app on my iphone, neither itunes on my laptop, nor the "remote" app display the alternate speaker symbol.  What am I doing wrong?

    I have set up my airport express to play music on my tv.  However, I can only stream music to it via "music" app on my iphone, neither itunes on my laptop, nor the "remote" app display the alternate speaker symbol.  What am I doing wrong?

    I have a HP Pavillion dv6000 running Windows Vista.  Itunes is up to date.  I have power cycled the router several times   it is a Surfboard sbg6580.  still no luck with seeing the airplay symbol on itunes, but Isee it on my phone and can stream music via the airport with my phone.  I can see both airports on the airport utility on my laptop.  I'm stumped...

  • Can i set up a airport with ipod

    I have a ipod touch 2nd gen. I was wondering if i could set up the airport express with my ipod if necessary.

    No u need a pc

  • How to set up an AirPort Express using static IP with internet provider limitations?

    I am trying to set up an Airport Express to act as a wireless router (for multiple users to use) and I have some limitations with my ISP provider...my ISP provider restricts access to the internet for each device by only providing/issuing one IP address to one device (so they charge extra for multiple attached devices). So only one device can access internet via an IP address (they link the device's MAC address to that specific IP address, therefore limiting internet to only one device).
    My ISP provider has provided me with the following info:
    - IP address
    - Subnet Mask
    - Router Address/Gateway
    - DNS servers (4 were provided)
    - domain name
    I was trying to work around the ISP provider so I don't get charged using multiple devices so I was configuring my Airport Express with the info provided (ie-IP address, subnet mask, etc.) by configuring the IPv4 "manually" using a static IP. After plugging in this info using AirPort Utility, I was able to get access to the internet through wifi/Airport but only if the bridge is disconnected and only with one device at the time (trying to use another device to access the WIFI from the Airport Express gave me the error "can't access the internet because the IP address 128.xxx.xxx.xx" is already in use by another user).
    I tried different angles such as changing the router mode to 'DHCP and NAT' (which doesn't yield any access to the internet on any device; I get the amber light blinking on the Airport device). When attempting to change the DHCP range, I get an error saying "the range provided doesn't work" (not exact wording).
    The only other thing I haven't tried is to supply my ISP provider with the MAC address of the Airport Express device. Does anyone know if this would work and, if so, would I be able to use my Airport Express as a wireless router?
    Unfortunately, I can't switch ISP providers as this provider is the only one I can use in the area (so frustrating!!) so I have to try to work around the system. Please help!!
    Note: my Airport Express is the new model (I bought it a few weeks ago) and I have tried connecting to it using Airport Utility version 6.3.2 with Mac OS X 10.9.4 and OS X 10.9.2

    Welcome to Apple Support Communities
    If your PC hasn't got a disc drive, download AirPort Utility from the Apple website to set up the AirPort Express > http://support.apple.com/kb/DL1547?viewlocale=es_ES

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for