HELP! I can't set up Time Capsule, period!

Hi,
Call me unintelligent but perhaps I'm just tired.
I've got my new Time Capsule, installed the software, connected it via Ethernet to my router, and plugged it into the power. All the Apple site tells me to do is to tell the Airport Utility to set up a new wireless system. But that's taken away my internet connection, meanwhile it says it can't connect to the internet.
GAAAAAH! Why is it so complicated to set up something that should be so simple?
Help very much appreciated.

Dammit, now Airport Utility can't even recognise my Time Capsule at all... WHY?!
When the Time Capsule (TC) is new out of box, it is broadcasting a wireless network with a name like +Apple Network xxxxxx+. AirPort Utility uses this network connection to allow you to configure the TC. In other words, your computer is logged onto the +Apple Network xxxxxx+ during the configuration of the TC.
Because you configured the Time Capsule to create a new wireless network (I assume that you gave this new network a name), when you clicked the Update button, the TC started to broadcast a new network using the name that you assigned to it. So, the TC "disappeared" from AirPort Utility because it was no longer connected to AirPort Utility. You changed networks, remember?
But...your computer is not logged onto this network, so it can't see the TC.
Close AirPort Utility.
Click the fan shaped Airport icon at the top of your computer screen and look for the name of the wireless network that you created and log on to that network.
Once you are connected, you can now open AirPort Utility and "see" the TC.
For many users, it is simpler to temporarily connect an ethernet cable from one of the LAN <-> ports on the TC to your computer to configure it that way. Becasue you are using an ethernet connection and not changing wireless networks, the TC will stay present in AirPort Utility.
Once you have the TC configured and updated, you can disconnect the ethernet cable. But, you will still need to log on to the wireless network that the Time Capsule is broadcasting.
Message was edited by: Bob Timmons

Similar Messages

How can I set my time capsule to back-up only once a day?

How can I set my time capsule to only back-up once a day. It appears to be backing up several times a day. Not sure there is a set schedule for the back-ups and they take a great deal of time; over an hour each.

tdenny2 wrote:
Not sure there is a set schedule for the back-ups and they take a great deal of time; over an hour each.
Then something is wrong. Changing the schedule will only deal with the symptom (and give up one of the better features of Time Machine's usually quick and unobtrusive hourly backups).
See if the size of the backups makes sense, considering what you've changed since the previous one. If it seems much too large, that may be the problem. See #D4 in Time Machine - Troubleshooting for some common culprits and ways to see just what's going on.
If the sizes seem reasonable, see #D2 in the same link for things that can cause extra-slow backups.

I can`t set my Time Capsule

Hi people, my doubt can seem quiet simple, but I'm unable to set my Time Capsule. I'll tell you.
I a new mac user, I've got a MacBookPro, and I just bought a Time Capsule (2Tb), but I don't know to set it for first time. I've followed the next steps:
1 - I've connect the TC to my router WI-FI by ethernet cable.
2 - I've plug in my TC.
3 - I've started my MacBookPro.
4 - I've started "Airport Utility" from folder "Utilities" (in "Applications").
5 - But then start the problem, 'cause Airport Utility doesn't find any base station or gadget, just say me that internet is OK, but the software can be hours searching with the next message: "Not found any Airport base station set. Airport utility will continue searching". So, after hours, I don't get any answer.
S.O.S. friends.
Thanks in advanced and sorry for my english.

But now, I've got a new question:
Does TC just work linked to the main router?
Is not possible that TC works by wi-fi, without cables?
Thanks.
Ok,, the TC is primarily designed to use ethernet WAN.. if you try and use wifi to connect it is not as good or reliable. You gain nothing.. but it depends on what you mean..
If the wifi from the existing router is good.. just turn off wifi in the TC.. plugged into the main router by ethernet you are now accessing it as fast as you would directly.. If you want faster connection, plug ethernet directly into TC lan port.
If you join by wireless to the existing router.. the ethernet ports go off.. there is no wifi from the TC to the rest of the network..it is just a client. And you will double hop the wireless which means half the speed.
Test it yourself.. that is the best way to learn. Hold down the option key and select wireless mode.. join will then be available.. although you may have to use 5.6 airport utility to do it.
The exception to this is if the main router is another apple model.. then the TC can use extend wireless.. but I am guessing that you have a wireless modem router not an airport extreme etc.

Can't set up time capsule

Plugged in TC and just has a flashing amber light. Not recognized with Airport utility

Plugging in TC to what??
To do the setup plug it into computer by ethernet.. no other network connection.. press and hold reset until it flashes rapidly.. then do the setup. Once completed you can connect it back into the network.. !
Do not try and do configuration in the network.

HT1178 wifi to set up time capsule

if i don't have the cable can i set up time capsule using wifi?

You will need to connect an Ethernet cable to the WAN "O" port on the Time Capsule to establish a wired connection to your modem or router.
Once this is done, the Time Capsule can be set up using wireless from a computer, iPad or iPhone.

Hi! how can I set the time machine/capsule back-up intervals? Heron 2

HI! EVERYBODY,
HOW CAN I SYNC 2 TIME CAPSULES INSTALLED IN TWO DIFFERENT LOCATIONS, MAIN HOME AND SUMMER HOME?
THANK YOU FOR YOUR HELP.
MERCi
HERON2

To use different backup intervals use TimeMachineEditor 2.5.3. I do not think syncing two Time Capsule to one another is feasible or possible. For all things Time Machine visit Pondini's Time Machine FAQ

Can I use my Time Capsule to set up multiple networks, or just one?

Can I use my Time Capsule to set up multiple networks, or just one? We'd like to offer the internet to clients who are at our studio, but don't want them able to access all our computers, so a second network for them would be useful.

Two big IFs here.
Not all versions of the Time Capsule have Guest Networking capability, so it might be a good idea to verify that first. Can you provide the model number of your Time Capsule. it's on the bottom of the device.....starts with an "A" followed by four numbers.
Next, assuming that the Time Capsule has Guest Network capability, the next requirement would be to verify that your modem is compatible with the Time Capsule for that feature.
Basically, you need a simple modem.....not a modem/router or gateway device that is often furnished by Internet Service Providers. If you are not sure what you have, post back with the make and model number of your "modem" and we'll see if we can find some details ont he device.

Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error The backup disk image "/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle" could not be created (error 17). Help

Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17). Help!

Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
Quit Keychain Access and try again to back up.

Just moved and have new internet WiFi provider and can't get my time capsule set up.

Just moved and have new wifi provider and can't get my time capsule to work with it.

The TC is designed for ethernet WAN connection .. it will not work with wifi provider.

Having trouble setting up Time capsule...

I just bought a new iMac last night. I also picked up Time Capsule and Apple TV. I'm having a problem setting up Time Capsule correctly. I'll go through what I did step by step and hopefully someone can help me as I've never tried to set up a wireless network before.
I'm connected to the internet via Comcast. I have the outside cable coming into the modem and the ethernet cable from the modem i have plugged into TC's WAN port (the one with the gear logo).
I start by opening Airport Utility ( I upgraded to the most recent version using the install disc that came with TC) and it recognizes TC in the left side of the window. It says it found TC with default settings and gives a name for it and an Airport ID. I click continue.
The next window prompts me to name the TC and assign a password. I do so and click continue.
The next window gives me some options about setting up a new or existing wireless network. It says it found some existing networks which I assume are my neighbors. I select "I don't have a wireless network and want to create one". I click continue.
The next window prompts me to give a name and security level to the new network. I provide a name and select WPA/WPA2 Personal and enter and verify a password. I click continue.
The next window asks whether I'd like TC to be in Bridge mode or Share a single IP address using DHCP and NAT.
If I click Share a single IP, a popup tells me "This will cause my TC to continue to blink amber and do I want to ignore this and continue?". So I figure this can't be a good thing and I click on Bridge mode not really knowing what it means.
The next window asks me to enter the TCP/IP info from my ISP. It also says to choose "Using DHCP" if I receive an IP address automatically. So in the box where it says "Configure IPv4", I select "Using DHCP" and there is an IP address and Subnet mask with numbers after each. Below that is Router Address, with fields for DNS Server, Domain Name and DHCP Client ID. These fields are blank. I click continue.
The next window says TC will use these settings:
TC name - Jim's Time Capsule
Wireless Mode - Create a wireless network
Network Name - Jim's Network
Wireless Security - WPA/WPA2 Personal
Connect Using - Ethernet
Configure IPv4 - Using DHCP
IP Address - (Provided Automatically)
If settings are correct, click Update to finish setting up your TC or click Go Back to change settings. I click Update and a box tells me that the device and its network service will be temporarily unavailable and do I want to continue? I click continue.
The next window tells me that the settings for TC have been updated successfully and its being configured. I then get a window reporting a problem.It says-
"Problem 1 of 1: Internet Connection
Your Apple wireless device does not have a valid IP address. Make sure your Apple wireless device is connected to your broadband modem or local network, verify your settings and try again. If you still can't connect, call your ISP."
There are two boxes with options. The first is "Connect Using" and "ethernet" is selected with "PPoE" being the other option. The second box says "Configure IPv4" and "Using DHCP" is selected, and "Manually" is the other option.
Obviously, I'm doing something wrong, but I don't have a clue. I'm getting online fine when I plug the ethernet cable into the back of the iMac. I've reset the modem by hitting the reset button. The light turns green on the TC but I can't connect to the internet. Any ideas? Feel free to call me a big dummy
Jim

Thank you, Jim Somoygi. I had a similar multi-hour odyssey with a AE and a Comcast cable modem.
This solved the seemingly endless blinking amber light:
1. unplug power from the modem and AE (or time capsule). Go get a beverage of your choice (wait a couple of minutes).
2. My modem has a battery backup (Comcast phone service). So, I pressed a tiny reset button on the back of the Comcast modem (it's made by Arris). With the battery backup, I'm not sure I would have been able to reset the modem simply by unplugging.
3. Make sure there is an ethernet cable connecting the cable modem and the AE or TC
4. Plug the modem back in, wait for the lights to come on. I also had to press a "standby" button on the front of the modem to get all the lights to come on.
5. Plug in the AE (or TC)
6. Green light on the AE (it's not easy being green)
7. Choose the appropriate Airport network & surf away.
I will say that the problem seems to be with the modem, rather than the AE. Once I reset the modem, I could configure the AE with ease. Once the AE is configured, it is absolutely rock stable. Before I fiddled with the network & brought this on myself, I enjoyed shockingly stable networking with the AE -- much better than with previous attempts with Netgear or Buffalo products (although I do like the ease with which Buffalo products can be configured together, using their proprietary handshaking protocol "AOSS").

Can i use my time capsule as ftp server

Hello to everyone,
resently I have read in the net that it is possible to set the time capsule as ftp server and also as a local server.
Can enyone explain me how to do it pracally?
Thank to people hwo will help in advance.

You heard wrong.. there is no ftp server in the TC..
It can do SMB to windows and AFP to apple.. and that my friend is that.
If you load files onto the TC you can access them remotely only via AFP.. google search remote access time capsule.

AirPort Utility can't find my Time Capsule

Used to use the TC as both router and for Time Machine, and everything worked fine. Recently switched to a different router, but I'd still like to use TC for Time Machine. But after I told the Mac to use the new router (which is running a different network name), it does not 'see' the TC.
When I run System Preferences > Time Machine > Select Backup Disk > Set Up Time Capsule, the AirPort Utility scans for a short while and comes up with the error, "Airport utility was unable to find any AirPort wireless devices."
None of the support documents I've found online seem at all helpful, so I suppose I'm stuck. What should I try next?

Thanks for the info.
Hold in the reset button on the Time Capsule (TC) until you see the amber light begin to flash more quickly and keep holding another 4-5 seconds when you see this occur, then release the reset button. The TC will restart in 25-30 seconds and the amber light will be flashing slowly.
+This reset will not affect any of your current backups+
Connect an ethernet cable from one of the available LAN <-> ports on your new router to the WAN (circle of dots icon) port on the TC
Open AirPort Utility and click Manual Setup. You may need to "switch" networks for this to occur so you can configure the TC.
Click the Base Station tab located below the row of icons to assign a name to your TC (you can use the same name you had before) and a device password (use the same password as before if you wish). Adjust Time Zone settings as well
Click the Wireless tab
Wireless Mode = "Off"
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update to save your settings and the TC will restart and you should have a green light in 25-30 seconds.
Now, power down all devices on your entire network, order is not important.
Wait a moment, then start your modem/router first and let it run a moment.
Then start the Time Capsule the same way
Start all devices the same way until everything is powered back up
You'll need to reset Time Machine to get backups going again
Open System Preferences (gear icon on the dock)
Open Time Machine
Click Select Disk
Click your Time Capsule to highlight it
Click Use for Backups
You will be able to backup using the wireless network or connect to the Time Capsule from your Mac using an ethernet cable.
You should be good to go.

Setting up Time Capsule for backup only on existing wireless network

I have a wireless network already set up with a NetGear wireless router. Cable plugs into router, router connected via ethernet cable to my Power Mac G5 desktop, plus 2 PC laptops in the house also connect wirelessly to the home network via this router.
I want to set up Time Capsule as an external hard drive to back up all three computers -- I don't necessarily need to use it as a wireless router although i'm not opposed to that if it's easier to do it that way.
When i try to set it up using AirPort utility, i get the amber flashing light. Airport utility is able to discover the device, and then always asks if it's OK to switch networks. I've tried both "switch" and "don't switch"; either way when i try to set it up, AirPort utility stalls out on "Reading Time Capsule Configuration"; eventually giving me the error msg: "Base Station Error: AirPort Utility was unable to find your Apple wireless device."
All i want to do is mount it as an external hard drive so i can use Time Machine for backup, and be able to use it to also back up the PC laptops wirelessly. I need help in the following three areas:
1. How should I be physically connecting my devices if i want to do this? Which cables go in which ports? There is only one ethernet port on the back of my G5. The G5 can connect to the router either wirelessly OR via ethernet cable. I've tried G5-->Time Capsule-->Router, G5-->Router-->Time Capsule, Router-->G5 PLUS Router-->Time Capsule, and I've tried every variation on the regular ethernet and WAN ports. What's the right way to do this.
2. If i'm not setting up the TC as a Wireless Router, is AirPort utility even the right tool for setting it up? it seems to be confused by the two wireless networks and won't let me get past that point. Am I supposed to click "Switch" when it asks me to switch networks? Is there a way to just mount it as an external drive and bypass the AirPort utility setup entirely?
3. Once i get it set up so it's visible as an external drive and usable for Time Machine backup, how do i then make it available to the other PCs on the network so they can back up to it also?
Thanks for your help.

sarah,
You already have an existing wireless network.
You do not need to plug the Time Capsule into anything except power.
Set the Time Capsule to "Join an existing wireless network"...
That is all you need to do.
Then all the computers should see the Time Capsule.
If you can't see "Join an existing wireless network" in the choices, hold down on the option key and then click on the choices.
Give that a try.

Set up Time Capsule w/ belkin modem/router AND DSL splitter

G'day,
I've got an existing network set up and would like to add the Time Capsule into the network. I'd like to use my current hardware if possible but am willing to purchase stuff if I need to.
There are some posts on my model of Belkin modem/router, but it didn't really help me.
Here are my machines:
1) PC - desktop (ethernet networking card, Windows 7,
2) Laptop (wireless networking, Windows 7)
3) Macbook Air (wireless networking)
4) iPhone (wireless networking)
Here are my hardware:
A) Wall socket
B) DSL splitter (3 x ports - port for line, port for phone, port for modem)
C) Cordless phone
D) Belkin modem/router (model number F5D7633-4A - 1 x ADSL port, 4 x Ethernet cable ports)
E) Time Capsule
Here is my current set up:
Wall socket > phone cable > Splitter > phone cable to phone, phone cable to modem/router > ethernet cable from modem/router to PC
This solution gives me internet access via the ethernet cable to the PC and via the Belkin modem/router wirelessly to the Laptop. However, I haven't been able to connect my Macbook Air to this network yet - it doesn't seem to work.
So my question is, how can I include my Time Capsule into the network. Will I need another modem? I read about a bridge but I have no idea what that is or where to find that setting.
Also, can someone explain how to get my Macbook Air to connect to the network?
Can someone talk me through exactly what extra hardware I need and what I need to do to set it all up?
Cheers,
Chris

Hi Bob,
Thanks for chiming in. Could you talk me through how to do that? I'm a numpty and just haven't figured out which ports to plug which cords into, etc. If you or someone else could dumb it really right down that would be sweet.
Also, the Belkin is a modem/router, not a router. I am under the assumption that I need a modem to access the internet and that the Time Capsule is just a router.
Is that right?
Chris

Set up time capsule as wireless access point

I am trying to set up my old apple time capsule as a wireless access point for my girlfriend. She is at college and the university does not permit routers, so I am trying to set the time capsule up so that is just takes the hardwired internet and allows wireless access to the internet so she can use her iPad and MacBook Air on the wireless instead of having to use a gigabit adapter to use the ethernet. The time capsule has the newest firmware and she is running mavericks which has the newest airport utility software. However I am not sure what settings to use to make this work. I am fairly intelligent when it comes to computers however I am not very skilled in networking. If anyone can help I would greatly appreciate it.
Thank you in advance!

How old is the Time Capsule? Running what firmware?
You have a problem.. If you cannot use the TC in router mode, then you are going to have to use it in bridge.. and it then depends on if the Uni system will hand out mulitple IP addresses. .which I doubt. In the end you might be stuck.. and it is not possible really with any system..
Bridge normally requires that the TC take an IP address and then clients connecting to the TC wireless will also get IP addresses.. but if the uni system only hands out one address then the TC has already captured it and there are no more available.. but try that method first.. as it is the easiest.
If it fails there is a more complicated method.. where we can give the TC a separate static IP in a different IP range and the wireless will still be bridged.. so the MBA or the ipad can use the wireless.. but only one can ever be online at a time.
The only way around this is to use the TC as a router contra the rules in the uni.. although I would suggest the uni only cares if you break their system. Most people don't.. but I am unsure what happens if you do.
Ask their IT people how to use a wireless only device like ipad, when they only provide ethernet. You might find there already is a wireless internet system as well.

HELP! I can't set up Time Capsule, period!

Similar Messages

Maybe you are looking for