Help! I can't update my nokia 5800 using the NSU.

Guys I've been trying to update my 5800 v31 to a v50. but the updater appears with a configuration error message. I tried to follow the steps on the help menu. But I can't find an open port to use with the updater. all the ports are closed. What do I do??

you may try Nokia by clicking this link
http://europe.nokia.com/support/contact-us
ask them to release that update via FOTA. they mey help you in this regard. because they helped me as well.
Glad to help

Similar Messages

Can't update my Nokia 5800!

My 5800 is currently stuck on Software version 30.0.011 and apparently I need to update it. I have tried to do it via the phone update but after the phone resets itself, it just says that the update cannot be installed. I've tried doing it via Nokia Software Updater but it can't recognise that i've connected my phone and with Nokia Ovi Suite it says to connect in Phone Suit Mode, which i do, and it still says it! I am getting really frustrated with this phone. It was fine until a few weeks ago. Can somebody please help?
Many Thanks in Advance,
Steve

I'm having the same problem... I'm using Ovi Suite as an administrator, and I've tried Nokia Software Updater separately, but I'm facing the same problem. The gentleman at the service centre told me that the latest version would be rolled out within a week, but I'm not too sure, since I've already been waiting for updates for over a month. Has Nokia forgotten all its 5800 customers in India?
Please help... I can't even install the new Ovi Maps with the free navigation, which was one of the main reasons I bought the phone.
Thank you.
Arhan

Can You Update Modern Apps without using the Windows Store?

Our corporate image for Windows 8.1 has the Windows Store app disabled. We have started to see some users are getting prompted to update the built-in apps, like the weather app or the video app. When these users attempt to update, they are taken to the Windows
store where they receive a message that states the store has been disabled by the administrator.
We're using SCCM 2012 R2 CU3. Is it possible to patch these apps through SCCM software updates rather than through the store? Is it possible to leave the store open for updates, but not for new app downloads? What can we do?

Hi,
The answer is no, When store app need to be updated, it would download a full new version package of the APP, install and replace the old ap. This process do need to login Windows Store to finish the job.
Roger Lu
TechNet Community Support

Please help, I can't figure out how to use the cable modem...

I'm visiting my sister in Baltimore, Maryland for about 3 weeks, and I want to set up the internet on my macbook so i don't have to keep using her powerbook g4. She has a Motorola Comcast Cable Modem set up for her powerbook, but I can't figure out how to find the info about her connection so I can copy it down into my computer. I keep going to her system preferences section and clicking the network button, but none of the various internet connections shown are actually the one she uses to connect. Please tell me where I can find her cable provider's info in her powerbook and where, in my macbook, i can enter this information and get on the internet.
p.s. i don't know if this is necessary info, but with the motorola cable modem came an installation disk for if you wanted to use the usb drive cord instead, but that disk isn't even read properly in my macbook. like, it lets me open up the disk and see all the files on it but it doesn't automatically start up an installation wizard so i really have no way of installing the items on the disk.

well, i can't really tell if i am only allowed one connection with this isp. basically, whenever i plug in the ethernet cord, all of the information gets filled in in the ethernet section of the network, except for the router info. there is router info filled in on my sister's computer whenever i plug the cord into her computer, though. does that mean i can't also use the modem for my computer? sorry, this is both my first time using a mac and my first time using anything other than dial-up, so i'm pretty lost. thanks for the info you've given me thus far.

How can i plot a histogram with using the results of Line Length

PLS HELP.How can i prepare a histogram with using the results of line length code(It is somewhere in the middle).
This is a final exam take-home question. I would appreciate if you can help?
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import java.text.*;
import java.io.File;
public class WordAnalyser extends JFrame implements ActionListener
private JMenuItem jmiAc, jmiSil, jmiCikis, jmiAnaliz, jmiHakkinda, jmiKullanim;
private JTextArea jta1, jta2;
private JFileChooser jFileChooser = new JFileChooser();
File hafizada;
File aktarilan = new File("Sonuc.txt");
// Main method
public static void main(String[] args)
WordAnalyser frame = new WordAnalyser(); /* Ana ekran olusturulur */
frame.setSize(400, 300); /* Degerleri belirlenir */
frame.setVisible(true); /* Gorunebilirligi ayarlanir */
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
public WordAnalyser()
setTitle("Serkan Ozgen Dosya Inceleme Programina Hos Geldiniz");
JMenuBar mb = new JMenuBar();
setJMenuBar(mb);
JMenu fileMenu = new JMenu("Dosya");
fileMenu.setMnemonic('F');
mb.add(fileMenu);
JMenu helpMenu = new JMenu("Degerlendirme");
helpMenu.setMnemonic('H');
mb.add(helpMenu);
JMenu kullanimMenu = new JMenu("Kullanim Kilavuzu");
mb.add(kullanimMenu);
fileMenu.add(jmiAc = new JMenuItem("Ac", 'A'));
fileMenu.add(jmiSil = new JMenuItem("Sil", 'S'));
fileMenu.add(jmiCikis = new JMenuItem("Cikis", 'C'));
helpMenu.add(jmiAnaliz = new JMenuItem("Analiz", 'D'));
helpMenu.add(jmiHakkinda = new JMenuItem("Hakkinda", 'H'));
kullanimMenu.add(jmiKullanim = new JMenuItem("Kullanim"));
getContentPane().add(new JScrollPane(jta1 = new JTextArea()), BorderLayout.CENTER);
getContentPane().add(jta2 = new JTextArea(), BorderLayout.SOUTH);
jmiAc.addActionListener(this);
jmiSil.addActionListener(this);
jmiCikis.addActionListener(this);
jmiAnaliz.addActionListener(this);
jmiHakkinda.addActionListener(this);
jmiKullanim.addActionListener(this);
public void actionPerformed(ActionEvent e)
String actionCommand = e.getActionCommand();
if (e.getSource() instanceof JMenuItem)
if ("Ac".equals(actionCommand))
Ac();
else if ("Sil".equals(actionCommand))
Sil();
else if ("Cikis".equals(actionCommand))
System.exit(0);
else if ("Analiz".equals(actionCommand))
sayim();
else if ("Hakkinda".equals(actionCommand))
JOptionPane.showMessageDialog(this,
"!!!! Bu program text analizi gerceklestirir. Her hakki saklidir SERKAN OZGEN!!!!",
"Bu program hakkinda",
JOptionPane.INFORMATION_MESSAGE);
else if ("Kullanim".equals(actionCommand))
     JOptionPane.showMessageDialog(this,
     " Ilk once dosya menusunden Ac i tiklayarak analiz etmek istediginiz Dosyayi seciniz (Lutfen uzantisi *.txt \nveya *.log olsun). Daha sonra Degerlendirme menusunden analizi tiklarsaniz dosyanizda kac adet rakam, harf, \ncumle ve kelime oldugunu gorebilirsiniz. Simdiden kolay gelsin",
     "Programin kullanim detaylari",
     JOptionPane.INFORMATION_MESSAGE);
private void Ac()
if (jFileChooser.showOpenDialog(this) == JFileChooser.APPROVE_OPTION)
hafizada = jFileChooser.getSelectedFile();
Ac(hafizada);
// Acilan Dosyayi ana ekranda gostermeye yariyan bir method
private void Ac(File file)
try
// Acilan dosyayi okuma ve ana ekranda gosterme
BufferedInputStream in = new BufferedInputStream(new FileInputStream(file));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta1.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
// Temizle tusunun hangi ekranlara etki edecegini secme
private void Sil()
jta1.setText("");
jta2.setText("");
private void sayim()
int buff;
int sayac = 0;
int Cumleler = 0;
int Kelimeler = 0;
int Karakterler = 0;
int Satirlar = 0;
int Rakamlar = 0;
boolean start = true;
int linenum = 0;
try
FileInputStream instream = new FileInputStream(hafizada);
FileOutputStream outstream = new FileOutputStream(aktarilan);
     BufferedReader infile = new BufferedReader(new InputStreamReader(new FileInputStream(hafizada)));
PrintStream out = new PrintStream(outstream);
     out.println("---Kelime Avcisinin Sonuclari---");
     String line = infile.readLine();
     while (line != null){
     int len = line.length();
     linenum++;
     line = infile.readLine();
     out.println("Line Length :"     + linenum + "\t" +len);
while ((buff=instream.read()) != -1)
switch((char)buff)
case '?': case '.': case '!': /* Eger "?", "." veya "!" gorurse program cumleleri ve kelimeleri arttirir*/
if (start == false)
Cumleler++;
Kelimeler++;
start = true;
break;
case ' ': case '\t': case ',': case ';': case ':': case'\"': case'\'': /* Eger /t,;:\ ve \" bu isarteleri goruruse program kelimeleri arttirir */
if (start == false)
Kelimeler++;
start = true;
break;
          case 'n': case '\n': /* Eger \n gorurse satirlari arttirir */
          if (start == false)
               Satirlar++;
               Kelimeler++;
               start = true;
          break;
default:
if (((char)buff >= 'a' && (char)buff<='z')|| /*a-z, A-Z veya - degerlerini gorurse karakterler arttirilir */
((char)buff >= 'A' && (char)buff<='Z')||
((char)buff == '-'))
Karakterler++;
if ((Kelimeler % 50) == 49)
if (start == true)
               out.println();
out.print((Kelimeler+1) + " ");
out.print((char)buff);
start = false;
          if ((char)buff >='0' && (char)buff <='9') { /* 0-9 gorurse rakamlari arttiri */
               Rakamlar++; }
}// switch
     }//while
instream.close();
out.println();
out.println();
out.println("Karakter sayisi: " + Karakterler);
     out.println("Kelime sayisi: " + Kelimeler);
out.println("Cumle sayisi: " + Cumleler);
     out.println("Satir sayisi: "+ Satirlar);
     out.println("Rakam sayisi: "+ Rakamlar);
outstream.close();
try
BufferedInputStream in = new BufferedInputStream(new FileInputStream(aktarilan));
byte[] b = new byte[in.available()];
in.read(b, 0, b.length);
jta2.append(new String(b, 0, b.length));
in.close();
catch (IOException ex)
catch (Exception e)
System.out.println(e);
}

Why is it that you're not interested in IOExceptions?
catch (IOException ex)
} Empty catch blocks is a hallmark of foolish Java code. At least print out the stack trace.
%

Please i need a help in updating my nokia 5800

Hello everybody
please I need a help
when i am updating my nokia in to v40 from v21 using nokia update software it begins downloading but when it reaches 20 mb it returns a lot of times at last it said you have a low internet connectivity
otherwise when i enter *#0000# and check for updates they said no updates are found
what is the solution of my problems I have still try updating for more than 5 days but nothing has been changed.
Can a body upload the update in others serves espically in mediafire sinnce mediafire is the best site for me to download from? please I need the update since my nokia now is slow and after update it will have new things and ofcourse will be speed up.
please can anyone upload it using www.mediafire.com and thanks so much
I want it quickly, and only mediafire for downloading working on my bad internet connectivity

For performing a firmware update you need an high speed internet connection i dont know whats the speed of internet connection you are using, in this case you can go to nokia care point and get it updated. Thats safe and you won't brick your phone too. Firmware updates can be done only through nokia software updater application and through the phone(fota)by the end user and there is no way to put the update file to some place or server like what you asked for.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Firmware update v21 Nokia 5800

I've got a problem. After updating my Blue Nokia 5800 to the newest v21 firmware my default theme changed to a red one. I suppose that it happened because my phone is treated like a red nokia 5800. For mroe information i can say that my phone is signed in NSU as Nokia 5800 xpress music RM-356 ( on the picture there is a red nokia 5800) and it was bought in Poland Plus ( Polkomtel ). Any suggestions what could i do to install the blue nokia firmware?

Correct, there are two more codes now
0575387: 5800 Taiwan CV B
0575392: 5800 Taiwan CV R
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

Problem with Firmware update for nokia 5800 xm ver...

I updated my nokia 5800 xpressmusic yesterday to version 40.0.005 and everything is ok, apart from I can't access my dialer or my contacts from my home screen, so how is it possible to make any calls? Can anyone help me please?
Solved!
Go to Solution.

jjegen seems to have differently than I. From what I see, tapping on the dialler and contacts on homescreen does nothing?
Your phone settings have had trouble. I would suggest restoring factory settings.
Go to MainMenu>green button>you will see the dialler. Type in *#7780# and enter your security code.
If that does not work:
Soft reset is *#7370# - this deletes all data on phone memory so make sure you have a backup.
OR
A hard reset (x6, 5800 and 5230 only) is done by the following (warning, this deletes all data on your phone):
1.) Turn off the phone and remove battery for 5min
2.) Reinsert battery
3.) Press and hold the green, red and camera buttons. DO NOT LET GO.
4.) While holding the three buttons, press the power key to boot the phone up.
5.) Keep on pressing until you see the country selection screen.
A correctly done hard reset would show you that everything on the phone (contacts, messages, calendar entries, etc) would be deleted. So it is advisable to back them up. Upon restoration, do not restore settings or files if possible.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Problem I can not Update new Nokia X6 8Gb firmware...

Problem I can not Update new Nokia X6 firmware Version V.21.0.005,
can someone tell me where can I get new Nokia Software Update for X6 8Gb,
I tried to update new firmware, but this is new version is not Aviable
where I can get new version in my phone serial number: numbers end
in ( 2587 ) and when will update available for my phone serial number be
Thank you

Reasons why a phone cannot update:
1. It is a country variant - country variants often get the updates later, or have updates skipped altogether. A Turkish country variant product code for example, skipped v40 and updated from v31 straight to v50.
2. It is network branded - phones acquired from network providers or these providers' stores SIM free are branded, and will not get updates until the networks approve and modify the updates to their liking.
3. Special editions - These special editions are chartered editions and may never get updates unless taken to a Nokia Care center.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Is there anymore updates for Nokia 5800 XM??

Hi, I would like to know if there is anymore firmware updates for Nokia 5800 XM after V52.0.007?
Can anyone provide me with the news?
I am a huge fan of Nokia and their Symbian platform.. But I am getting more and more disappointed with them.
I cannot use another OS. Cannot use new softwares. Very slow and low hardware and performances..
I was hoping to get a Symbian ^ 3 update for my 5800 but that is not possible... So I have decided to see the last firmware update for 5800 and see if its any good. Otherwise I'll simply throw it away and start using HD2.

There are rumors about a v60 coming out, but I quite doubt it... and even if it comes it will most likely be a failure...
Nokia has done so much stuff wrong latelly (even Symbian^3 devices are filled with bugs and issues) and doesn't commit into fix them before launching something new based on the old ones.
This angers the users and most likely drivens them away... Nokia was once one of the biggest (if not the biggest) name in smartphone industry... now ... iPhone, Android based and even the dieing Blackberry are way ahead of them ... only 'dumbphones' on Nokia worth some consideration...
If you think 5800 has issues then don't look at it's more expensive brother ... the N97... so much for a top of the line phone...
Nokia has the firmware so fragmented that makes Android look like an homogeneous mass of software...
Because how some companies work, I start a personal blacklist of devices/brands that will never buy.... Apple and Sony are on the top of that list, Nokia will soon join them :[
Well... true to be said, I have 2 old 'dumbphones' - one of them has a 3.2MP camera with OPTICAL zoom, while it has 6~7 years more than 5800 it beats it in screen quality, camera quality and build quality, it also cost half the value of it - that I would most likely return to once 5800 dies... because it will die...
5800xm on a blender ... will happen sooner than expected.... v51 is a failure as an update .... v52 just postponed its fate....

Update for Nokia 5800!! The CEO of Nokia MUST read...

Please make an update for Nokia 5800. We already used it for years. Upgrade it to symbian ^3 if you could, so we (your loyal customer and user) can feel how is it to use the symbian ^3 like the later phone that came out after nokia 5800. Since the Nokia 5800 is the first phone that have the touch screen feature and it was came out to take down the iPhone in the past, so please give us the feedback for supporting you.

The 5800 will never get symbian^3 as it lacks the necessary hardware to run it. It's processor is too slow and it does not have a GPU.
It may get further updates to improve it's symbian^1 operating system, but with it now being an old model it may get nothing. All you can do is wait and see what happens.
If you are unhappy about this you can raise a complaint directly with nokia by using the "contact us" link.

Can't update to Nokia Belle

I'm using an N8.
I tried to update to Nokia Belle using Nokia Suite but the process always gets stuck during backing up the phone. It said that it cannot back up the phone and there was the black-and-yellow exclamation sign by the 'Messages' in the back up list. Can anyone help me please?
Solved!
Go to Solution.

Hi Lailajusoh,
What I can suggest for you is to manually backup your phone by opening Nokia Suite and following the instructions as posted on the attached screenshots from Screenshot1.jpg to Screenshot4.jpg and after backing up try to update your Nokia N8. Screenshot4.jpg will b posted in my next post right below this as nokia only limits to three attachments per post.
Ngwangwa - Six Million Ways To Die Choose One
Attachments:
Screenshot1.jpg ‏258 KB
Screenshot2.jpg ‏148 KB
Screenshot3.jpg ‏97 KB

HT4061 Help! I've updated my iPhone 4G with the new iOS7 update and entered the passcode in it and now my iphone is diabled because I can't remember the passcode and the screen keeps showing "iPhone is disabled". Have I lost ever having no access to my iP

Please help. I can't use my iPhone 4G with it's updated new iOS7. I can't remember my passcode and it stays at "iPhone is disabled". Have I lost the use of my iPhone forever? It's an iPhone not iPad.
Message was edited by: diana135

HT4061 Help! I've updated my iPhone 4G with the new iOS7 update and entered the passcode in it and now my iphone is diabled because I can't remember the passcode and the screen keeps showing "iPhone is disabled". Have I lost ever having no access to my iPhone?

HT4759 I can't update IOS 4.3 to the new IOS 5. Or download the latest verison of I Tunes, on my IPad 2. Because I don't have a computer,but i heard Apple suport can help me with setting it up.

I can't update IOS 4.3 to the new IOS 5. Or download the latest verison of I Tunes, on my IPad 2. Because I don't have a computer,but i heard Apple suport can help me with setting it up.

Scroll down and see the "Update Your Device Using iTunes" section here:
HT4623
There is no "update icon" in iOS versions earlier than iOS 5.
The update is very large (over 1.2 gigabytes). You need a good internet connection to download it to your computer. Maybe you'll need to take a trip to a city to get a good enough connection.

Can not update tab if its not the default sub-tab.

Can not update tab if its not the default sub-tab.
JDeveloper Version 10.1.2.1.0 (Build 1913)
Hi. I have a problem with a lovOpenWindowAction
The UIX is created with a master UIX and have several sub-tab that is included as UIX-pages.
The lovOpenWindowAction lies in the included UIX-page
The sub-tab I have a problem with has a table with users. Then I have a Create New button than I want to click on and select a new user that should be included in the table in the sub-tab.
When I click on the button I open a LOV-window. Here I select the user that I want to add.
In the LOV Action-class I save my new value in the database. Then in the method onLovUpdate I update the iterator with the new values from the database.
But in my GUI the subtab is not updated until I click on it.
But if I make the subtab the default subtab then it all works just fine and the GUI is updated directly.
Here is the code for the tableAction in the subtab. This code lies in an included UIX-page. Target is the table id.
<tableActions>
<button text="Create New" id=" createNewRollperson" accessKey="N">
<primaryClientAction>
<lovOpenWindowAction destination="FiskeRollpersonerLOV.do"
source=" createNewRollperson "
targets="joinedRollpersfiskeer message"/>
</primaryClientAction>
</button>
</tableActions>
Here is some code from the master UIX-page
<subTabLayout id="flikar">
<subTabs>
<subTabBar selectedIndex="${ui:defaulting(param.index,0)}">
<contents>
<link id="resorFlik" text="Resor"
disabled="${sessionScope.fiske.id == null}"
selected="${(param.source == 'resorFlik') or empty param.source}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="resorFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
<link id="rollpersonerFlik" text="Rollpersoner"
disabled="${sessionScope.fiske.id == null}"
selected="${param.source == 'rollpersonerFlik'}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="rollpersonerFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
</contents>
</subTabBar>
</subTabs>
<contents>
<switcher childName="${param.source}"
defaultCase=ResorFlik">
<case name="resorFlik">
<include node="${ctrl:parsePage(uix, 'includes/ResorFlik')}"/>
</case>
<case name="rollpersonerFlik">
<include node="${ctrl:parsePage(uix, 'includes/FiskeRollpersonerFlik')}"/>
</case>
</switcher>
</contents>
</subTabLayout>
What am I missing?? I cant have this subtab as the default subtab! Please help me with a solution!

hi,
Change the condition type to manual entry.
or
for example delivery costs will be different at the time of PO and actual delivery costs then at the time of invoice we select planned delivery costs and settle them first with the actual delivery cost.
Thanks & Regards,
Kiran

Help! I can't update my nokia 5800 using the NSU.

Similar Messages

Maybe you are looking for