Help! I can't use my 5800 GPS

Keep in mind that I am a female ( I dont get GPS at ALL ), and I have been having a lot of trouble with the GPS.
I just can't figure out how to use it. I have read the FAQ on Nokia's website which tell me NOTHING.
I open the GPS, and it shows my current location. I press Options > Search > Addresses
And I put in the address that I want to go to, and it says not found.
I then put in another address. Not found.
I tried 5 address in 5 different ways and every time it says it isn't found.
I have full reception on my handset and the latest Firmware.
How do I go from one address to another?
Please help :/

I typed into my ovi.com account on my computer, the following:
Alpha Street, Blacktown, New South Wales, Australia
I found Alpha Park near Westpoint Blacktown Shopping Center between Patrick and Balmoral streets. If that is what you are looking for, I can only recommend as a minor fix to your issue to add a bunch of your favorites on your Ovi online account and sync them to Maps on your 5800.
That is what I did for about a dozen places I go to a lot and it was much easier on my computer and easy to sync.

Similar Messages

HT1918 plz i want help , how can i use credit card visa , im try to fill blank no. card information when i finish appear me msg ( the payment card you entered is not valid in israel p;ease provide avalid payment card for israel , im from palestine ) plz s

plz i want help , how can i use credit card visa , im try to fill blank no. card information when i finish appear me msg ( the payment card you entered is not valid in israel p;ease provide avalid payment card for israel , im from palestine ) plz solutio?

Oh thank god i am not the only one with this problem. It started with me on Saturday (aug 28) and still, no solution.
I live in the border with the USA so i’ve been using my itunes account with a USA debit card and then it started with that **** declined CC problem =S
The funny thing is that i’ve been trying to change countries, setting my account to Mexico and it would still say that the CC are declined. Tried 2 USA cards and 2 Mexican cards, no results =S
Wanna read something funny. I even tried to create a brand new account based in Mexico, with another email address and it still wouldn’t let me, tells me my cards are not valid……..the **** apple!!! i cannot update any app and i just got my iphone 4 on friday last week and i am dying to try new apps.
So far I’ve sent 2 emails and still no **** solution. At least i am not alone =’(

Can i use digi prepaid with iphone4 or do i have to get a postpaid help pls, can i use digi prepaid with iphone4 or do i have to get a postpaid help pls

can i use digi prepaid with iphone4 or do i have to get a postpaid help pls, can i use digi prepaid with iphone4 or do i have to get a postpaid help pls

I don't know if you can legally download a full Windows 7 installer, but if you can find one, you just need to copy the image to a flash drive. See:
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
and
https://discussions.apple.com/thread/4087200?start=0&tstart=0
Amazon has several different versions of Windows 7 available on disk, though. Have you tried them?
Regards.

If I buy a ipad mini with cellular, and not sign up for cellular service, can I use the onboard GPS, or does it depend on the cell signal since it is aGPS

If I buy a ipad mini with cellular, and not sign up for cellular service, can I use the onboard GPS, or does it depend on the cell signal since it is aGPS?

Right. But as I understand it, the aGPS is a function that speeds location using cell signals, but isn't necessary for the GPS signal. I can buy a plugin device that is a real GPS that I can use with my iPad mini. However, I would need an app for maps. I was wondering if anyone had used one of these.

How can I use the embeded GPS in my Sprint MiFi Hotspot for my location on my iPad4 wifi only device

The iPad uses the wifi network to determine the location My default connection is through my Sprint MiFi, but it does not use its location gps eventhough it is active for Maps. It did use a local tower in a wisconsin town yesterday and no it thinks I'm there and I cannot refresh it. I am brand new to apple IOS as I won the device last Thursday. I'm trying to upgrade the OS to 7 as it has 6 installed. I need to find a faster connection to do it though.
Any help wpuld be appreciated

Re: How can I get the best out of my battery life?
Hi,
When I make phone calls people on the other end have difficulty hearing me. They describe as they can hardly hear me as if I was speaking through the pillow etc). I am not touching any buttons and obviously it is not mute. This was happening couple of time in June, then every now and then. Recently it happened a few time in 2 weeks. I was trying to check if it was a reception issue but the place I spoke from is my office I make 70% of phone calls from. Can you book time for me in repair shop and address the issue.
Thank you.
Sergey Sinitsyn

Help Required -- Can we use SQL Query to READ data from SAP MDM Tables

Hi All,
Please help.........
Can we use SQL Query to READ(No Creation/Updation/Deletion just Read) Data from SAP MDM tables directly, without using MDM Syndicator.
Or direct SQL access to SAP MDM tables is not possible. Only through MDM Syndicator can we export data.
Thanks in Advance
Regards

All the tables you create in Repository comes under A2i_CM_Tables in Database named as your repository name. So the tables names are fields of table A2i_CM_Tables. Now i tried it but cant make it.
Now, I dont think its possible to extract all fields in tables and there values using select query. May be pure sql guy can do that or not.
But there is no relation of data extraction and syndicator. Data is viewed in Data Manager. and you can also store data in a file from DM also.
BR,
Alok

HP LaserJet Pro MFP M125nw Driver Setup Error - Please Help - I can't Use My Printer

Hi,
I have just bought a new HP LaserJet Pro MFP M125nw Printer. But I can not install it. I can't use it, even one page written document.
This is the error when setup appears:
Please help me...

Hi @NafirKeyh ,
I see that you are experiencing issues installing the printer on Windows 7. I would really like to be able to help you resolve this issue.
Try these steps to see if it will resolve the issue. Disabling the Startup programs and temporarily turn off the Antivirus Software should prevent any interference during the installation.
Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
How is the printer going to be connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can I use an external GPS Receiver via Bluetooth?

Great phone. I used a Galaxy Nexus for over a year until I got this phone, but once I started using the Z10, I never looked back. The "Hub" is a GREAT feature, exactly what I use most of the time. Oddly enough, I was never much of a BB fan until the Z10.
Anyhow, I have bought several apps and accessories for the Z10. I rely on my Z10 a lot.
I still have (from my old Windows Mobile 6 phone days back several years ago) a perfectly working external GPS receiver that has Bluetooth (Holux GPSlim236). Great little receiver.
Since I often use my Z10 for GPS nagigation (I am using Mireo DON"T PANIC) for directions whilst riding my motorcycle all day long, with Bluetooth enabled to my helmet, having the GPS radio on as well as Mobile (aka phone) and Bluetooth does drain the battery faster than if I could avoid using the internal GPS at this time (I still want to use the internal GPS at other times). I do have a data plan, so I could use the internal maps, however, I often ride through places with no data access (back country).
I was able to pair the Bluetooth GPS Receiver to the Z10 (easy enough), however, there is no option in the "Network Connections" settings area to be able to disable the internal GPS radio, or anywhere else, so I can't tell for sure that this is working (that is, not using internal GPS but using external GPS). I suspect it is not using the external GPS Receiver, though, since Bluetooth settings indicate "no services" for the external Bluetooth device.
Is there a way to sometimes use the external Bluetooth Receiver on the Z10 (in order to save battery on long trips)?
It is also not just for battery power savings, but also when I ride there is no air conditioning, so the phone does get hot, and I suspect would be cooler if I used an external GPS receiver via already-enabled-anyways Bluetooth.
Thanks

I am not sure my original message was clear.
I have th Z10, it has GPS software and a built-in GPS radio receiver. I also have an external GPS radio receiver, not a GPS device. It is strictly a radio receiver. I used to use it years ago on my Windows Mobile device - the software with maps was on Windows Mobile, and the GPS receiver hooked up via Bluetooth.
The GPS receiver in the Z10 uses the Z10 battery. I have the Bluetooth on anyhow to connect to my helmet headset. Since Bluetooth is on already, I could save Z10 battery by using the external GPS radio receiver (disable the internal GPS radio receiver), thought the map software would still run on the Z10.
So, the previous response says "does have GPS profile" but also says "external GPS will not work:".
I am not sure the statement was respect to my setup.
What I really need is for the Z10 Bluetooth to see the external GPS receiver, perhaps as a serial device or as a GPS device, howsoever such things work, and for the GPS map software to use the external rather than try to use the internal (the map software should not really care, it should be the OS that virtualises the GPS port).

Account Help. Can't use Apple ID

Hello.
I am in a complete shambles over my Apple ID account as such I can no longer login to the community using it and had to create this account just to ask for help.
Ok so my main issue is I login using my normal ID that I use on everything and that I normally use on these communities. But as I login it asks me to re-login for security and set my username. Which is odd as I have already done this once. As I choose my name it states that I can't use that email as its already in use.
This is where I get stuck. I am trying to login to the account that is using that email but it says I can't as it is in use yet won't let me use it. I cannot physically get past that barrier and use the account that says its in use.
What am I doing wrong? Why am I locked out of my account?
Thanks

that's true and I'm fully aware of it, but the thing is that I'm not asking for company's support inside the country! I just need to be able to register thoroughly so i can download apps and buy music...it's an issue which could be fixed online! Apple has so many customers here in Iran and this is the least help the company can provide those who have paid them, but are not able to receive any support from the company, currently, in their own country.
At every store around the corner here in Iran i can make a fake Apple ID, that would work, only with the help of a teenager. But i thought it would be much better if the problem could be solved from the root. i really think this should be discussed by those in charge

Help! Can't use java command to execute application

I can compile using the javac command and that works fine. But then it can't seem to find the class that was just created.
I get this message:
"Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld"
Please help!!!
Thanks!

The file is saved as the class name.
Here's what happens:
C:\jdk1.2.2\bin>javac HelloWorld.java
C:\jdk1.2.2\bin>java HelloWorld
Exception in thread "main" java.lang.NoClassDefFoundError: HelloWorld
Here's the code that I'm trying to get to run:
The HelloWorld application program
public class HelloWorld
public static void main(String argv[])
System.out.println("Hello World!");
}

Hi, I can't connect to itune error 11556 please help i can't use my iphone

i was syncing for my iphone to use the new ios5 but i can't connect i get this error #11556 so now i can't use my iphone i need to syn anyone plseae help thank you chino10458

wifi is wifi, and business hub means very little.. this is area for time capsule discussion.. but the standard measures apply.
1. Set wireless name (SSID) to a name that is short, no spaces and pure alphanumeric. Eg your Business Hub call wireless BH. There is no need for names longer than that.
2. Set wireless channel for 2.4ghz to 11 or 6 or 1. Please test in that order. In Eurozone you can add 13 or use it instead of 11. They are the only 3 non-overlapping channels.
3. Use no security to test.. of course this is unsafe long term.. so this is to test for a few minutes only.
The only security that should be used with N wireless is WPA2 TKIP-AES .. it can be named several different things ie in Apple routers it is WPA2 personal. Use a passkey of 10-20 characters.. more if you are paranoid, mix of upper and lower case + numerics.. so pure alphanumeric.
4. If it fails set the mode to G wireless. It is more consistent standard.
If it still fails buy an Apple router and use that as WAP.

Need Help: I Can't Use My Palm Pre Sprint Here In Philippines...

i can't use my palm pre sprint that my mother gave to me here in philippines coz there's NO SIM CARD slot on it... please help me !!
Post relates to: Pre p100eww (Sprint)

I just replied to your other post. Please do not cross-post your question to multiple boards. Thanks!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Help I can't use my scroll

I can't use my scroll on my curve 9300 all I can do is call out and answer when someone calls me...I can't get to my menu or text messages nothing at all. All it does is stay on the top of my screen and doesn't move I have took my battery out for the 15secs and put it back in didn't do nothing I can even use the enter button either getting very frustrating with it please help me thanks
Solved!
Go to Solution.

Hi,
Welcome to the BB Community...
Since ur having 9300 Curve, then u have trackpad and not a scroll...
Try these steps, might help u out...
Do a battery pull restart(pull out the battery when ur BB is switched ON)...now press the trackpad n keep it pressed for 3-5 sec...repeat it 1-2 times n then reinsert the battery n let ur BB start...now, see if ur trackpad is working or not...even if ur trackpad starts working, this might be a temporary solution...
For permanent solution, visit a BB Service Center n get ur trackpad replaced...do take a backup b4 that cz after replacement, the OS will be reinstalled...
with regards
simply abhik...
Please click "Accept as Solution" if your issue has been solved and to give thanks/appreciation, click thumbs up...
For BB OS update: http://us.blackberry.com/software/smartphones/update.html
BB Simulators: http://us.blackberry.com/sites/developers/resources/simulators.html

Plz help i can't use my nano anymore

alright when i tried to put new songs in my nano there is a circle with a bar in it and it says do not disconnect I tried to reset it without succes plus i tried to make a restoration and it says you need an update but when the update is finish it cant install it omg so for 2 days i cant put off my i pod and there is a white window with a flashing icon with abar in black plz help how can i return to life my ----ing i pod

I can't even eject my stupid nano. This is high tech. We need a 10 year old. UGHHHHHHHHHHHHH

Using Nokia 5800 GPS and accepting a call

Hi, I was wondering if there was a way to answer calls while the GPS is on on my Nokia 5800 Navigation Edition. Currently, when I use the GPS and someone calls, I tap the answer button, but I get a message that says not allowed. I was looking around in the settings, but can't find anything. I was hoping there would be a way to answer the call and turn on the speakerphone so I can drive and talk at the same time. Anyway know if this is possible?
Thanks!

Getting my first call during active turn-by-turn navigation, I wondered about this strange behaviour too. As it is I dont see any green phone icon on the navigation screen. With the terminal placed in the included windscreen fixture, it is hardly traffic safe to have to press many buttons to get the handsfree activated! Nokia could consider another option on the main screen when a call is waiting to be accepted, for going directly to speakerphone-mode, or at least a configurable option within the maps application. As of now it jumps back to the maps app, which induces the added (two) press of the application switch button. I suppose buying a separate handsfree kit might 'solve' this basic issue, but that should really not be needed out-of-the-box with a dedicated navigation edition. If someone figures a setting that I have overlooked, I would be pleased to get a hint, thx.

Help! I can't use my 5800 GPS

Similar Messages

Maybe you are looking for