[HELP]i Cannot start emct after i change my hostname in linux ...
hi..
I clone my Oracle Enterprise Linux 5 in VMware,and then i change the hostname. that clone already installed Oracle database 10g release 2 enterprise edition. i can create a database, however i cant start emctl it said
+[oracle@ocp10g_mirror bin]$ ./emctl start dbconsole+
TZ set to Asia/Jakarta
OC4J Configuration issue. /u01/app/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_ocp10g_mirror.drcjah.com_ocp10g_mirror not found.
thx...
Hi,
Edite the /etc/hosts and give the new hostname there and also give the new hostname in
[root@teng ~]# more /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=teng.domain.com
check the ping to hostname and hostname.domain.co is pinging.
Regards
Kaunain
Similar Messages
-
The front camera on my iPod touch 4th generation is frozen. I cannot use it. Updating software does not help. This started right after I bought it, new from BestBuy. What can I do? When i go to the camera, it is stuck on a black screen. the only way to use my camera is through other camera apps, but if I try to switch it to the front camera, it freezes again.
If you still have the problem after retoring the iPOd to factory defaults/new iPod then The iPod is likely defective and replacement is required. You can make an appoinment at the Genius Bar of an APple store or take it back to BestBuy if within warranty
-
Please help me, cannot start I-tunes since Update 7,5
Pleas Help me,
cannot start I-tunes since Update 7.5. Informtion is, currant files are missing, i-tunes doesn´t start.
Try to reinstal everything, and install i-Tunes with an old version from cd.
Then information will be, cannot start becaus some parts from an newer Version.,
so iám started updat to the new Version 7.5 and also i-tunes cannot started, because some current files are missing.
Can anybody help me, i don´t now what to do now. I hade my new I-pod, because i have only problems, please help me to love it again.
Ulrichok I am no expert on PC's or itunes but I have had the same problems as a lot of you on here. Have a look at what the solutions are. You need to remove the itunes 7.5 program and the quicktime program as it is causing the problem. Uninstall may or may not work, manually deleting the programs will work but your regisry will still indicate it is installed. My advice is to install
Windows Installer CleanUp Utility
I am not sure how to make an active link to it so have a look through this forum, install it, run it, remove all traces of itunes and QT then install from the downloads section version 7.4.3 which was ok. Then dont update, not yet, let them get sorted first. I hope this helps, it did me after about 4 hours and the info was right there all the time. -
Kded crashes on amarok quit in gnome, cannot start jack after
I'm running amarok in gnome and it works fine except that I'm getting the KDE crash handler telling me that kded has cashed just after I quit amarok. And amarok seems to keep holding onto hw:0, so I cannot start jack after. Which prosess could I kill to make jack start?
ThanksZestyTang:
If you import the modified folder you'll just end up with duplicates as the ratings and other metadata will be lost. It's starting over from scratch.
alexkess:
Since it works OK in the other account it might be a preference file other than iPhoto's. Try the following:
Trouble Shooting Preferences in Leopard
1 - Create a folder titled "Preferences A" on the Desktop.
2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
3 - Make a duplicate copy of the Preferences A folder on the Desktop as a precautionary backup.
4 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
NOTE: you may have to drag the contents of the working folder to the trash and empty if moving the contents to the A folder only copies them instead of moving.
5 - If the problem is fixed:
A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button as seen here.
6 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.
OT -
I cannot send sms after having change my sim card. how do i restore it?
I cannot send sms after having change my sim card. how do I restore it?
Contact your carrier and see if your account is provisioned properly.
-
Installed OAS 4.0.8.2.4 and configured it. Everything is working fine with listener, plsql cartridge, Java cartridge and OSSWA. But if change listener's user/group from Oracle/Dba to nobody/nobody. Listener will not start. It hangs in as follows:
========================================================================
Information: Listening on NORM port 80 address 0.0.0.0
Information: wriorProcessInit: RMProxy IOR Bootstrap Service initialized
Information: Adapter services initialized successfully
Information: The server started successfully
Server now running as process 15654
OWS-08850: Oracle Web Listener 'www' started.
Oracle Web Listener 4.0.8.2.4 Enterprise Edition - Release (Domestic)
Copyright (c) Oracle Corporation 2000. All rights reserved.
Information: Listening on NORM port 5502 address 0.0.0.0
Information: wriorProcessInit: RMProxy IOR Bootstrap Service initialized
===========================================================================
from the message above, we can see if it failed to start the "Adapter services"
If we change the user/group back to Oracle/Dba, it starts fine.
And also, we have under $ORACLE_BASE/admin, the listener ( name devl ) permission has been changed accordingly to the user/group change. We follow the instruction from OAS configuration to change user/group.
( Read access to the configuration file
Read access to all files that provide content for servicing requests
Read access to all imagemap files
Execute access to all Oracle Application Server binaries and program files that the Web Listener must execute
Write access to the log and error files
Read access to user directories )
Thanks.Thanks. After a few more days testing. We finally figure out where it went wrong. We changed user/group from node manager. ( from Oracle/dba, installer, to nobody/nobody). After that, we only changed $ORACLE_BASE/admin/ows/SITE_name/httpd-host_name/listener_name to be read and write accessed by nobody. We forgot to change owl.cfg to be read access to nobody/nobody. After we changed that. It starts fine.
Thanks again. -
HELP!!! My macbook pro cannot start up after dropping!!!
I dropped my Macbook Pro 2.4 hardly to the ground on the right bottom days ago and it just cannot start up anymore now.
I can hear the start up chime, but the screen is black and it shuts down automatically.
I doubted it was because the hard drive dead, so I took out the hard drive and anticipated to see at least a folder with a question mark, but nothing - still black and powers off.
HELP!!! Anybody has any idea?Contact Apple & make an appointment to have the computer repaired. Applecare does not cover accidental damage. If you want to diagnose & repair yourself - MacFixIt Tutorials
Message was edited by: CMCSK -
Cannot start FIMSynchronizationService after applying ServicePack for SharePoint 2013 Server
Dear all,
Yesterday we have applied SP1 for SharePoint 2013 on our SharePoint Farm (1 one server + 1 db server). Unfortunately the FIMSynchronizationService (Forefront Identity Manager Synchronization Service) will not start anymore after applying the SP.
The SharePoint Services: User Profile Synchronisation Service and User Profile Service are started in Central Admin (can started /stopped without problems). Only the Windows Services FIMSynchronizationService cannot be started anymore.
What can be the cause of this problem?
The following application event is visible in the Event Viewer:
ID 6324
The server encountered an unexpected error and stopped.
"BAIL: MMS(1856): sql.cpp(8490): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(1856): sql.cpp(8533): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(1856): server.cpp(260): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(1856): server.cpp(3860): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(1856): service.cpp(1539): 0x80231334 (The sql connection string has unsupported values.)
ERR: MMS(1856): service.cpp(988): Error creating com objects. Error code: -2145184972. This is retry number 0.
BAIL: MMS(1856): clrhost.cpp(283): 0x80131022
BAIL: MMS(1856): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(1856): server.cpp(251): 0x80131022
BAIL: MMS(1856): server.cpp(3860): 0x80131022
BAIL: MMS(1856): service.cpp(1539): 0x80131022
ERR: MMS(1856): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 1.
BAIL: MMS(1856): clrhost.cpp(283): 0x80131022
BAIL: MMS(1856): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(1856): server.cpp(251): 0x80131022
BAIL: MMS(1856): server.cpp(3860): 0x80131022
BAIL: MMS(1856): service.cpp(1539): 0x80131022
ERR: MMS(1856): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 2.
BAIL: MMS(1856): clrhost.cpp(283): 0x80131022
BAIL: MMS(1856): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(1856): server.cpp(251): 0x80131022
BAIL: MMS(1856): server.cpp(3860): 0x80131022
BAIL: MMS(1856): service.cpp(1539): 0x80131022
ERR: MMS(1856): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 3.
BAIL: MMS(1856): service.cpp(1002): 0x80131022
Forefront Identity Manager 4.0.24501. Try to reboot server and run PSCONFIG wizard.
2. Check if permission of sync account has not changes (SPECIALLY Replicate directory change )permission on AD or local computer
3. what account are you logged in with.
If possible provide ULS log details
If this helped you resolve your issue, please mark it Answered
Hello, thanks for your reply,
We have done the following:
1. rebooted server
2. run psconfig: Psconfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -c
installfeatures
3. result: complaining about webconfig.accsrv.xml (removed this and tried again, then complaining about other web.config file)
9/24/2014 19:05:14 9 ERR Task applicationcontent has failed with an unknown exception
09/24/2014 19:05:14 9 ERR Exception: System.IO.InvalidDataException: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML
heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.CheckMergedActionsConfiguration(XmlDocument xd, String sourceFileName, Boolean createMergedActionsConfiguration)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ExceptionInfo for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ExceptionInfo is Er is een uitzondering van het type {0} opgetreden. Aanvullende informatie over de uitzondering:
{1}
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionInformation
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ExceptionInfo for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ExceptionInfo is Er is een uitzondering van het type {0} opgetreden. Aanvullende informatie over
de uitzondering: {1}
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionInformation
09/24/2014 19:05:14 9 ERR Er is een uitzondering van het type System.IO.InvalidDataException opgetreden. Aanvullende informatie over de uitzondering: Het webconfiguratiebestand C:\Program
Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
System.IO.InvalidDataException: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is
ongeldig.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.CheckMergedActionsConfiguration(XmlDocument xd, String sourceFileName, Boolean createMergedActionsConfiguration)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionInformation
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ExceptionInfo for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ExceptionInfo is Er is een uitzondering van het type {0} opgetreden. Aanvullende informatie over
de uitzondering: {1}
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionInformation
09/24/2014 19:05:14 9 INF Entering function get CommandCollection.this[string key]
09/24/2014 19:05:14 9 INF Entering function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found value in collection for key global
09/24/2014 19:05:14 9 INF Leaving function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found command global in collection
09/24/2014 19:05:14 9 INF Leaving function get CommandCollection.this[string key]
09/24/2014 19:05:14 9 INF Entering function get CommandCollection.this[string key]
09/24/2014 19:05:14 9 INF Entering function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found value in collection for key initialize
09/24/2014 19:05:14 9 INF Leaving function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found command initialize in collection
09/24/2014 19:05:14 9 INF Leaving function get CommandCollection.this[string key]
09/24/2014 19:05:14 9 INF Entering function Command.this[string key]
09/24/2014 19:05:14 9 INF Entering function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found value in collection for key SINGLESERVER
09/24/2014 19:05:14 9 INF Leaving function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found parameter SINGLESERVER in collection
09/24/2014 19:05:14 9 INF Leaving function Command.this[string key]
09/24/2014 19:05:14 9 INF Entering function Command.this[string key]
09/24/2014 19:05:14 9 INF Entering function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found value in collection for key upgradesessionid
09/24/2014 19:05:14 9 INF Leaving function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found parameter upgradesessionid in collection
09/24/2014 19:05:14 9 INF Leaving function Command.this[string key]
09/24/2014 19:05:14 9 INF Releasing the farm upgrade lock in common exception handler.
09/24/2014 19:05:14 9 INF Entering function TaskBase.OnTaskStop
09/24/2014 19:05:14 9 INF Creating the OnTaskStop event for task applicationcontent
09/24/2014 19:05:14 9 ERR Task applicationcontent has failed
09/24/2014 19:05:14 9 INF friendlyMessage for task applicationcontent is Er is een uitzondering van het type System.IO.InvalidDataException opgetreden. Aanvullende informatie
over de uitzondering: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
09/24/2014 19:05:14 9 INF debugMessage for task applicationcontent is Er is een uitzondering van het type System.IO.InvalidDataException opgetreden. Aanvullende informatie
over de uitzondering: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
System.IO.InvalidDataException: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is
ongeldig.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.CheckMergedActionsConfiguration(XmlDocument xd, String sourceFileName, Boolean createMergedActionsConfiguration)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/24/2014 19:05:14 9 INF Entering function TaskBase.FireTaskStateChanged
09/24/2014 19:05:14 9 INF Firing the OnTaskStateChanged event for task applicationcontent
09/24/2014 19:05:14 9 INF Entering function TaskDriver.TaskStateEventHandler
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ApplicationContentTaskDisplayName for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ApplicationContentTaskDisplayName is bestanden met inhoud voor toepassingen installeren
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Received an TaskStateEventHandler event. task:applicationcontent TaskBase.State:stopped
09/24/2014 19:05:14 9 INF Entering function TasksQueue.IncrementTaskFailed
09/24/2014 19:05:14 9 INF Incremented the number of tasks failed to 1
09/24/2014 19:05:14 9 INF Leaving function TasksQueue.IncrementTaskFailed
09/24/2014 19:05:14 9 INF Task applicationcontent has stopped and failed. Total failed is now 1
09/24/2014 19:05:14 9 INF Leaving function TaskDriver.TaskStateEventHandler
09/24/2014 19:05:14 9 INF Entering function CommandLine.TaskStateEventHandler
09/24/2014 19:05:14 9 INF Received an TaskStateEventHandler event. task:applicationcontent TaskBase.State:stopped
09/24/2014 19:05:14 9 INF Task applicationcontent has stopped and failed. Total failed is now 1
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ApplicationContentTaskFailConfigDisplayLabel for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ApplicationContentTaskFailConfigDisplayLabel is Kan de bestanden met inhoud voor toepassingen
niet installeren.
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Last message from task applicationcontent is Er is een uitzondering van het type System.IO.InvalidDataException opgetreden.
Aanvullende informatie over de uitzondering: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of
dit element is ongeldig.
09/24/2014 19:05:14 9 INF Leaving function CommandLine.TaskStateEventHandler
09/24/2014 19:05:14 9 INF Leaving function TaskBase.FireTaskStateChanged
09/24/2014 19:05:14 9 INF Leaving function TaskBase.OnTaskStop
09/24/2014 19:05:14 9 INF Leaving function TaskThread.ExecuteTask
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is ApplicationContentTaskDisplayName for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id ApplicationContentTaskDisplayName is bestanden met inhoud voor toepassingen installeren
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 ERR Task bestanden met inhoud voor toepassingen installeren failed, so stopping execution of the engine
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is ApplicationContentTaskFailConfigDisplayLabel for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id ApplicationContentTaskFailConfigDisplayLabel is Kan de bestanden met inhoud voor toepassingen niet installeren.
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 ERR Kan de bestanden met inhoud voor toepassingen niet installeren.
Er is een uitzondering van het type System.IO.InvalidDataException opgetreden. Aanvullende informatie over de uitzondering: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft
geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
System.IO.InvalidDataException: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is
ongeldig.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.CheckMergedActionsConfiguration(XmlDocument xd, String sourceFileName, Boolean createMergedActionsConfiguration)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/24/2014 19:05:14 1 INF Entering function TaskDriver.NotifyTaskSummary
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is TotalTasksRan for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id TotalTasksRan is Totaal aantal uitgevoerde configuratie-instellingen: {0}
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalran, TaskDriverEventArgs.EventType.notify,
message: Totaal aantal uitgevoerde configuratie-instellingen: 4
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Totaal aantal uitgevoerde configuratie-instellingen: 4
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is TotalTasksSucceeded for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id TotalTasksSucceeded is Totaal aantal geslaagde configuratie-instellingen: {0}
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalsuccess, TaskDriverEventArgs.EventType.notify,
message: Totaal aantal geslaagde configuratie-instellingen: 3
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Totaal aantal geslaagde configuratie-instellingen: 3
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is TotalTasksFailed for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id TotalTasksFailed is Totaal aantal mislukte configuratie-instellingen: {0}
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalfail, TaskDriverEventArgs.EventType.notify,
message: Totaal aantal mislukte configuratie-instellingen: 2
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Totaal aantal mislukte configuratie-instellingen: 2
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.NotifyTaskSummary
09/24/2014 19:05:14 1 ERR One or more configuration tasks has failed or some tasks were not run
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is PostSetupConfigurationStoppingSucceeded for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id PostSetupConfigurationStoppingSucceeded is De configuratie van SharePoint-producten is gestopt.
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverStopping
09/24/2014 19:05:14 1 INF Sending a task driver stopping event: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType.stopping, De configuratie van SharePoint-producten
is gestopt.
09/24/2014 19:05:14 1 INF Entering function TaskDriverStateChange.Enter
09/24/2014 19:05:14 1 INF Acquiring the writer lock to change the state
09/24/2014 19:05:14 1 INF Current state of the task driver is neverrun. You want to change it to stoppingrun
09/24/2014 19:05:14 1 INF Changed state of the task driver to neverrun
09/24/2014 19:05:14 1 INF Released the writer lock to change the state
09/24/2014 19:05:14 1 INF Leaving function TaskDriverStateChange.Enter
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType stopping, message
De configuratie van SharePoint-producten is gestopt.
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverStopping
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.ExecuteTasks
09/24/2014 19:05:14 1 ERR One or more configuration tasks has failed to execute
09/24/2014 19:05:14 1 INF Entering function TaskDriver.Stop
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id PostSetupConfigurationFailedEventLog is De configuratie van SharePoint-producten is mislukt. Voor een goede werking moet u de configuratie
opnieuw uitvoeren. Als u een juiste diagnose wilt stellen van dit probleem, kunt u de gedetailleerde foutinformatie op {0} raadplegen, het probleem oplossen en de configuratiewizard opnieuw uitvoeren.
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 ERR De configuratie van SharePoint-producten is mislukt. Voor een goede werking moet u de configuratie opnieuw uitvoeren. Als u een juiste diagnose wilt stellen van dit
probleem, kunt u de gedetailleerde foutinformatie op C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\PSCDiagnostics_9_24_2014_19_4_25_376_763845942.log raadplegen, het probleem oplossen en de configuratiewizard opnieuw uitvoeren.
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is PostSetupConfigurationFailedUserMessage for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id PostSetupConfigurationFailedUserMessage is De configuratie van SharePoint-producten is mislukt. U moet de configuratie opnieuw uitvoeren
voordat u de SharePoint-producten kunt gebruiken. Zie het diagnostisch logboek op {0} en het gebeurtenislogboek van de toepassing voor meer informatie.
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverStop
09/24/2014 19:05:14 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop, De configuratie van SharePoint-producten
is mislukt. U moet de configuratie opnieuw uitvoeren voordat u de SharePoint-producten kunt gebruiken. Zie het diagnostisch logboek op C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\PSCDiagnostics_9_24_2014_19_4_25_376_763845942.log
en het gebeurtenislogboek van de toepassing voor meer informatie.
09/24/2014 19:05:14 1 INF Entering function TaskDriverStateChange.Enter
09/24/2014 19:05:14 1 INF Acquiring the writer lock to change the state
09/24/2014 19:05:14 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
09/24/2014 19:05:14 1 INF Changed state of the task driver to neverrun
09/24/2014 19:05:14 1 INF Released the writer lock to change the state
09/24/2014 19:05:14 1 INF Leaving function TaskDriverStateChange.Enter
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message De
configuratie van SharePoint-producten is mislukt. U moet de configuratie opnieuw uitvoeren voordat u de SharePoint-producten kunt gebruiken. Zie het diagnostisch logboek op C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\PSCDiagnostics_9_24_2014_19_4_25_376_763845942.log
en het gebeurtenislogboek van de toepassing voor meer informatie.
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverStop
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.Stop
09/24/2014 19:05:14 1 INF UnLocking the task driver for exclusive use while we ran tasks
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.Run
09/24/2014 19:05:14 1 ERR Post setup configuration was not run successfully when using the command line task driver module
09/24/2014 19:05:14 1 INF Leaving function PsconfigCommandLineMain.Main
No idea what to do? -
Cannot start AdminServer after adding weblogic user to OID
Hi.
We have two OIDs: one is used in the production env, the other in dev.
I succeeded in configuring SOA-dev and OID-dev so that worklist users get authenticated against OID-dev.
Moreover I added the weblogic user to OID-dev following this guide (http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10224/bp_worklist.htm#insertedID2), so that weblogic can login and administer the worklist.
I repeated the steps in PROD env (for SOA-prod and OID-prod) but after adding weblogic to OID-prod I cannot start AdminServer-prod:
<Mar 10, 2011 5:31:01 PM CET> <Critical> <Security> <BEA-090404> <User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
<Mar 10, 2011 5:31:01 PM CET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1009)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Anyway, configuring SOA-prod to use OID-dev (simply switching OID ip address) makes things work.
If I enable SSL between SOA-prod and OID-prod I can start the servers but I cannot login into the worklist. The same in DEV: enabling SSL between OID-dev and SOA-dev does not influence server boot but I cannot login into the worklist.
I think the problem is related to SSL configurtaion in OID-prod but since it's 10g there is no orclsslinteropmode to disable (required to worklistapp).
SOA is 11.1.1.2 and OID 10g.
Any suggestions?
Thanks for your precious help,
MichaelHi Anuj.
Thank you very much for you help.
My situation is a bit different: we do not want to use two OIDs at the same time.
In PROD the order of auth providers is
1. OIDAuth-prod
2. DefaultAuthenticator
whereas in DEV it is:
1. OIDAuth-dev
2. DefaultAuthenticator
Id DEV server boot and worklist login are ok.
OIDs are v10.1.2.3 but OID-prod is updated with the latest security patches (of Oct 2010). I will raise a SR.
Thanks again,
Michael -
[SOLVED] Cannot start mysqld after switching to MariaDB
Hey guys,
I just switched to MariaDB as recommended.
After installing MariaDB and running
systemctl start mysqld
, I get this error message:
Job for mysqld.service failed.
journal:
systemd[1]: Starting MariaDB database server...
mysqld[9358]: 130326 0:27:17 InnoDB: The InnoDB memory heap is disabled
mysqld[9358]: 130326 0:27:17 InnoDB: Mutexes and rw_locks use GCC atomic builtins
mysqld[9358]: 130326 0:27:17 InnoDB: Compressed tables use zlib 1.2.7
mysqld[9358]: 130326 0:27:17 InnoDB: Initializing buffer pool, size = 128.0M
mysqld[9358]: 130326 0:27:17 InnoDB: Completed initialization of buffer pool
mysqld[9358]: 130326 0:27:17 InnoDB: highest supported file format is Barracuda.
mysqld[9358]: 130326 0:27:17 InnoDB: Waiting for the background threads to start
mysqld[9358]: 130326 0:27:18 Percona XtraDB (http://www.percona.com) 5.5.30-MariaDB-30.1 started; log sequence number 46580545
mysqld[9358]: 130326 0:27:18 [ERROR] mysqld: Got error 'Size of control file is smaller than expected' when trying to use aria control file '/var/lib/mysql/aria_log_control'
mysqld[9358]: 130326 0:27:18 [ERROR] Plugin 'Aria' init function returned error.
mysqld[9358]: 130326 0:27:18 [ERROR] Plugin 'Aria' registration as a STORAGE ENGINE failed.
mysqld[9358]: 130326 0:27:18 [ERROR] Aria engine is not enabled or did not start. The Aria engine must be enabled to continue as mysqld was configured with --with-aria-tmp-tables
mysqld[9358]: 130326 0:27:18 [ERROR] Aborting
mysqld[9358]: 130326 0:27:18 InnoDB: Starting shutdown...
mysqld[9358]: 130326 0:27:19 InnoDB: Shutdown completed; log sequence number 46580545
mysqld[9358]: 130326 0:27:19 [Note] /usr/bin/mysqld: Shutdown complete
systemd[1]: mysqld.service: main process exited, code=exited, status=1/FAILURE
Last edited by lonaowna (2013-03-26 01:23:20)Hi ! I come here because I have a trouble since the last update of Mysqld :
I cannot start the daemon with
sudo systemctl start mysqld
I have these problems when i look in journalctl -xn :
mars 26 00:22:14 server mysqld[11593]: InnoDB: Error: log file ./ib_logfile0 is of different size 0 3174400 bytes
mars 26 00:22:14 server mysqld[11593]: InnoDB: than specified in the .cnf file 0 5242880 bytes!
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [ERROR] Plugin 'InnoDB' init function returned error.
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [ERROR] Unknown/unsupported storage engine: InnoDB
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [ERROR] Aborting
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [Note] /usr/bin/mysqld: Shutdown complete
mars 26 00:22:14 server systemd[1]: mysqld.service: main process exited, code=exited, status=1/FAILURE
When I try with mysqld, I have
130326 0:23:21 [Warning] Can't create test file /var/lib/mysql/server.lower-test
130326 0:23:21 [Warning] Can't create test file /var/lib/mysql/server.lower-test
mysqld: Can't change dir to '/var/lib/mysql/' (Errcode: 13)
130326 0:23:21 [ERROR] Aborting
130326 0:23:21 [Note] mysqld: Shutdown complete
And when I look in /var/lib/mysql/server.err I have these lines
130207 23:32:56 mysqld_safe mysqld from pid file /var/lib/mysql/server.pid ended
130322 00:25:27 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
130322 0:25:27 InnoDB: The InnoDB memory heap is disabled
130322 0:25:27 InnoDB: Mutexes and rw_locks use GCC atomic builtins
130322 0:25:27 InnoDB: Compressed tables use zlib 1.2.7
130322 0:25:27 InnoDB: Initializing buffer pool, size = 128.0M
130322 0:25:27 InnoDB: Completed initialization of buffer pool
130322 0:25:27 InnoDB: highest supported file format is Barracuda.
InnoDB: Error: tried to read 65536 bytes at offset 0 3173376.
InnoDB: Was only able to read 1024.
InnoDB: Fatal error: cannot read from file. OS error number 17.
130322 0:25:30 InnoDB: Assertion failure in thread 139785666135872 in file os0file.c line 2538
InnoDB: We intentionally generate a memory trap.
InnoDB: Submit a detailed bug report to http://bugs.mysql.com.
InnoDB: If you get repeated assertion failures or crashes, even
InnoDB: immediately after the mysqld startup, there may be
InnoDB: corruption in the InnoDB tablespace. Please refer to
InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html
InnoDB: about forcing recovery.
23:25:30 UTC - mysqld got signal 6 ;
This could be because you hit a bug. It is also possible that this binary
or one of the libraries it was linked against is corrupt, improperly built,
or misconfigured. This error can also be caused by malfunctioning hardware.
We will try our best to scrape up some info that will hopefully help
diagnose the problem, but since we have already crashed,
something is definitely wrong and this may fail.
key_buffer_size=16777216
read_buffer_size=262144
max_used_connections=0
max_threads=151
thread_count=0
connection_count=0
It is possible that mysqld could use up to
key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 134074 K bytes of memory
Hope that's ok; if not, decrease some variables in the equation.
Thread pointer: 0x0
Attempting backtrace. You can use the following information to find out
where mysqld died. If you see no messages after this, something went
terribly wrong...
stack_bottom = 0 thread_stack 0x40000
/usr/bin/mysqld(my_print_stacktrace+0x29)[0x78ae99]
/usr/bin/mysqld(handle_fatal_signal+0x471)[0x67ad71]
/usr/lib/libpthread.so.0(+0xf1e0)[0x7f226299a1e0]
/usr/lib/libc.so.6(gsignal+0x35)[0x7f22615612c5]
/usr/lib/libc.so.6(abort+0x148)[0x7f2261562748]
/usr/bin/mysqld[0x8f2ac0]
/usr/bin/mysqld[0x8af1a0]
/usr/bin/mysqld[0x8e187c]
/usr/bin/mysqld[0x8e75ef]
/usr/bin/mysqld[0x834204]
/usr/bin/mysqld[0x7fe61f]
/usr/bin/mysqld(_Z24ha_initialize_handlertonP13st_plugin_int+0x41)[0x67ccf1]
/usr/bin/mysqld[0x59ad94]
/usr/bin/mysqld(_Z11plugin_initPiPPci+0xa42)[0x59f342]
/usr/bin/mysqld[0x524328]
/usr/bin/mysqld(_Z11mysqld_mainiPPc+0x447)[0x529187]
/usr/lib/libc.so.6(__libc_start_main+0xf5)[0x7f226154da15]
/usr/bin/mysqld[0x51ff89]
The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains
information that should help you find out what is causing the crash.
130322 00:25:30 mysqld_safe mysqld from pid file /var/lib/mysql/server.pid ended
130326 00:24:58 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
130326 0:24:58 InnoDB: The InnoDB memory heap is disabled
130326 0:24:58 InnoDB: Mutexes and rw_locks use GCC atomic builtins
130326 0:24:58 InnoDB: Compressed tables use zlib 1.2.7
130326 0:24:58 InnoDB: Initializing buffer pool, size = 128.0M
130326 0:24:58 InnoDB: Completed initialization of buffer pool
InnoDB: Error: log file ./ib_logfile0 is of different size 0 3174400 bytes
InnoDB: than specified in the .cnf file 0 5242880 bytes!
130326 0:24:58 [ERROR] Plugin 'InnoDB' init function returned error.
130326 0:24:58 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
130326 0:24:58 [ERROR] Unknown/unsupported storage engine: InnoDB
130326 0:24:58 [ERROR] Aborting
130326 0:24:58 [Note] /usr/bin/mysqld: Shutdown complete
130326 00:24:58 mysqld_safe mysqld from pid file /var/lib/mysql/server.pid ended
130326 00:25:33 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql/
130326 0:25:33 InnoDB: The InnoDB memory heap is disabled
130326 0:25:33 InnoDB: Mutexes and rw_locks use GCC atomic builtins
130326 0:25:33 InnoDB: Compressed tables use zlib 1.2.7
130326 0:25:33 InnoDB: Initializing buffer pool, size = 128.0M
130326 0:25:33 InnoDB: Completed initialization of buffer pool
InnoDB: Error: log file ./ib_logfile0 is of different size 0 3174400 bytes
InnoDB: than specified in the .cnf file 0 5242880 bytes!
130326 0:25:33 [ERROR] Plugin 'InnoDB' init function returned error.
130326 0:25:33 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
130326 0:25:33 [ERROR] Unknown/unsupported storage engine: InnoDB
130326 0:25:33 [ERROR] Aborting
130326 0:25:33 [Note] /usr/bin/mysqld: Shutdown complete
130326 00:25:33 mysqld_safe mysqld from pid file /var/lib/mysql//server.pid ended
When I try mysqld_safe, here is what I get
130326 00:24:58 mysqld_safe Logging to '/var/lib/mysql/server.err'.
130326 00:24:58 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
130326 00:24:58 mysqld_safe mysqld from pid file /var/lib/mysql/server.pid ended
Resolution
===== It's a good thing to make a post :
It allows me to order my ideas and I find the solution here http://serverfault.com/questions/104014 … erent-size
I juste deleted the files /var/lib/mysqld/ib_logfile0 and /var/lib/mysql/ib_logfile1
First, I had a problem about the file who is in the future (WTF ?:p) But after, it worked !
Thanks Anyway !
Last edited by shox (2013-03-25 23:51:43) -
Cannot Start Sqlplus after installing Oracle on linux
Hi All,
I tried installing oracle10g-10.1.0 on Fedora core 2.My installation was successful.But i'm not able to start sqlplus after my installation.I have made the necessary changes in the .bash_profile.Please do find the contents of the file and let me know what i need to do further for me to start both my sqlplus and isqlplus.when i go to the bin directory and execute sqlplus as oracle user i get the following error messages.
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory.
How can i solve this error.Your suggestions are greatly appreciated.The contents of my .bash_profile are as follows.Pls advice on the same.Thanks in advance.
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
umask 022
PATH=$PATH:$HOME/bin
unset USERNAME
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/10.1.0/Db_1
export ORACLE_SID=orcl
export PATH=$PATH:$ORACLE_HOME/bin
export PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
#/u01/app/oracle/product/10.1.0/db_1/bin
#NLS_LANG=american_america.US7ASCII
#export NLS_LANG
#ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
#export ORA_NLS33
Thanks,
RamaHi Gasparotto,
Thanks for your time and for your suggestion in helping me out to find a solution to my problem.As per your request pls do find enclosed the contents of the command env in my /home/oracle directory.Pls advice me where i have done a mistake.Your inputs are greatly appreciated.Thanks once again.
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
QTDIR=/usr/lib/qt-3.3
USER=oracle
LD_LIBRARY_PATH=/u01/app/oracle/product/10.1.0/Db_1/lib
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
ORACLE_SID=orcl
ORACLE_BASE=/u01/app/oracle
KDEDIR=/usr
MAIL=/var/spool/mail/oracle
PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/bin:/etc::/bin::/home/oracle/bin:/u01/app/oracle/product/10.1.0/Db_1/bin
INPUTRC=/etc/inputrc
PWD=/home/oracle
LANG=en_US.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SHLVL=1
HOME=/home/oracle
LOGNAME=oracle
LESSOPEN=|/usr/bin/lesspipe.sh %s
DISPLAY=:0.0
ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
G_BROKEN_FILENAMES=1
XAUTHORITY=/home/oracle/.xauthzZ1FKa
_=/bin/env
Thanks,
Rama -
Cannot Start SI4 After New License
I have a test drive version of NW 4 running on Suse 9.2 Linux and db2. It ran fine for 3 months. Yesterday I installed a new license because the old one expired. I installed it as root while the db was running.
This morning, I cannot start sap, because the database won't start.
The following is the output of R3trans. Can anyone give me any suggestions on things to try to resolve it?
4 ETW000 R3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 30.10.2005 - 07:08:07
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d -w xx.log
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Oct 30 07:08:07 2005 148 0.000148
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000175
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 59 0.000234
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' ...
4 ETW000 57 0.000291
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/SI4/SYS/exe/run/dbdb6slib.so), hdl 0
4 ETW000 21464 0.021755
4 ETW000 [dev trc ,00000] Library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' loaded
4 ETW000 59 0.021814
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 59 0.021873
4 ETW000 [dev trc ,00000] Version of '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' is "640.00", patchlevel (0.7)
4 ETW000 137 0.022010
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 40 0.022050
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 40 0.022090
4 ETW000 [dev trc ,00000] New connection 0 created 35 0.022125
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 45 0.022170
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.022201
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 37 0.022238
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.022277
4 ETW000 [dev trc ,00000] RLIMIT_STACK: current=-1, max=-1 296 0.022573
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) database interface 640.00 [opt] 31 0.022604
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 27 0.022631
4 ETW000 [dev trc ,00000] (0.6) DB6: Schema setting for remote monitoring (note 711477)
4 ETW000 36 0.022667
4 ETW000 [dev trc ,00000] (0.7) DB6: support DB6_DB_TYPE=DB2/400 (note 663756)
4 ETW000 35 0.022702
4 ETW000 [dev trc ,00000] (0.7) DB6: CTE on UNICODE (note 717357) 23 0.022725
4 ETW000 [dev trc ,00000] Supported features: 22 0.022747
4 ETW000 [dev trc ,00000] - smart optlevel handling (non-UR, FAE) 32 0.022779
4 ETW000 [dev trc ,00000] - SQLExtendedBind for LOBs and Unicode (V8 or higher)
4 ETW000 38 0.022817
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 87 0.022904
4 ETW000 [dev trc ,00000] ..done 136 0.023040
4 ETW000 [dev trc ,00000] Sun Oct 30 07:08:08 2005 97739 0.120779
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1497] (BEGIN) 67 0.120846
4 ETW000 [dev trc ,00000] &+*** DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1032N No start database manager command was issued. SQLSTATE=
4 ETW000 46 0.120892
4 ETW000 [dev trc ,00000] &+*** 57019
4 ETW000 37 0.120929
4 ETW000 [dev trc ,00000] &+***
4 ETW000 36 0.120965
4 ETW000 [dev trc ,00000] &+***
4 ETW000 37 0.121002
4 ETW000 [dev trc ,00000] &+*** ABAP location info '', 0
4 ETW000 49 0.121051
4 ETW000 [dev trc ,00000] &+***
4 ETW000 35 0.121086
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1497] (END) 23 0.121109
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'SI4' as 'sapsi4' failed
4 ETW000 138 0.121247
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'SI4'"
si4host:si4adm 77>
si4host:si4adm 77> db2admin start
db2admin: Command not found.
si4host:si4adm 78> db2admin
db2admin: Command not found.
si4host:si4adm 79> db2start
10/30/2005 07:36:36 0 0 SQL8000N DB2START processing failed; a valid product license was not found.
SQL1032N No start database manager command was issued. SQLSTATE=57019Yes, startsap is the base script, which calls other scripts, R3trans and db2start.
I didn't have any luck. I did find an indication on an IBM website that the error message related to the fact that the db2 license had expired. There is a command called "db2licm" which you can run to update the db2 license, but I couldn't find a license file.
I wonder if IBM imposes it's own license expiration separate from SAP's, and that IBM require a re-install. So, I gave up and just re-installed it. Oh well, re-installing is good practice.
Sorry I couldn't help you. -
Cannot start ldap after drop ODS,ODSSM and impdp from last night dump file.
Hello Experts,
I have daily export (use expdp) for ODS and ODSSM schemas on new 11.1.1.5 OID environment. I am testing to use ldapadd to add entries (for Net Service only) from old version (10.1.5).
During the ldapadd test, there are some errors and I fix these errors on ldif file. I try to do a clean load. So, I stop the ldap, drop schema (ODS, ODSSM), use impdp to import these two schemas with a good dump file.
But I cannot start ldap again. I know the dump file contains some status for running ldap. How to clean the status after impdp completed?
The error message when I try to start ldap:
/u01/oracle/OracleOID/opmn/bin>> ./opmnctl shutdown
/u01/oracle/OracleOID/opmn/bin>> ./opmnctl status
opmnctl status: opmn is not running.
/u01/oracle/OracleOID/opmn/bin>> ps -ef|grep ldap
oracle 19921 22984 0 13:17:58 pts/0 0:00 grep ldap
/u01/oracle/OracleOID/opmn/bin>> ps -ef|grep OID
oracle 17515 1 0 Sep 8 ? 0:00 /u01/oracle/OracleOID/ccr/bin/nmz
oracle 19926 22984 1 13:18:13 pts/0 0:00 grep OID
/u01/oracle/OracleOID/opmn/bin>>
Then I drop ODS, ODSSM. (Done)
Then impdp from dump file (Done)
/u01/oracle/OracleOID/opmn/bin>> ./opmnctl startall
opmnctl startall: starting opmn and all managed processes...
================================================================================
opmn id=thruway:6701
1 of 2 processes started.
ias-instance id=asinst_1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
oid1/oidmon/OID/
Error
--> Process (index=1,uid=194262388,pid=20189)
time out while waiting for a managed process to start
Log:
/u01/oracle/bea_default/asinst_1/diagnostics/logs/OID/oid1/console~OID~1.log
thruway:/u01/oracle/OracleOID/opmn/bin>> ./opmnctl status
Processes in Instance: asinst_1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
oid1 | oidldapd | N/A | Down
oid1 | oidldapd | N/A | Down
oid1 | oidmon | N/A | Down
EMAGENT | EMAGENT | 19969 | Alive
Thank you,
XiaogangTry to reboot physical machine. Your problem will be solved.
Regards,
A -
Cannot update iTunes after motherboard change.
iTunes was on D drive. After MB change, D drive became E drive. Updates fails since D drive is now the CD player.
Define "update". Do you mean Apple Software Update?
The iTunes application normally installs components in Program Files and Program Files (x86) on 64-bit machines. Those folders are normally inside the system drive, which is typically the same as the boot drive. The iTunes library is normally created at <User's Music>/iTunes. If all content has been stored inside the default media folder of .../iTunes/iTunes Media then the library should be portable and can be operated from any path. Hold down shift as you launch iTunes to get an option to choose or create a library, click choose, and browse to the iTunes Library.itl file inside your iTunes folder. Playlists are all stored inside the .itl file. The library consists of the .itl file, some supporting files in the same folder and the album artwork folder, and all media that has attached to the library.
You can't generally save the playlists independently since iTunes records them with absolute paths which may not work if/when you try to reimport. Moving a potable library around as a unit works. See Make a split library portable for background.
tt2 -
Cannot start compiz after upgrading catalyst to 8.12
Hi all, I just upgraded my catalyst to 8.12 from 8.11 today and found that I could not start compiz, while X works with Slim the login manager. Here is my xorg.conf, which works perfectly for 8.11:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "on"
EndSection
Section "Files"
# RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "record"
Load "extmod"
Load "dri"
Load "dbe"
Load "GLcore"
Load "glx"
Load "xtrap"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "AOC"
ModelName "FW913"
EndSection
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD4650"
Option "AccelMethod" "EXA"
#Option "XAANoOffscreenPixmaps" "on"
Option "AccelDFS" "on"
Option "EnablePageFlip" "on"
Option "TexturedVideo" "on"
Option "VideoOverlay" "off"
Option "OpenGLOverlay" "off"
Option "Textured2D" "on"
Option "TexturedXrender" "on"
Option "UseFastTLS" "1"
Option "BackingStore" "on"
Option "AGPMode" "4"
Option "GARTSize" "64"
Option "ColorTiling" "true"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "RENDER" "Enable"
Option "DAMAGE" "Enable"
Option "Composite" "Enable"
EndSection
For now I have to switch back to 8.11. Anyone has a solution?You could try playing with your options in the device section. I was not able to start X after upgrading catalyst to 8.12 but disabling the "TexturedXrender" option got it working again.
Maybe you are looking for
-
JMSAn error occurred while forwarding a message for distributed destination
Hi, i have getting issue with JMS Server delivery fail, below is the errors ####<Aug 24, 2012 2:03:54 PM CDT> <Warning> <JMS> < <[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <BEA1-0979336B7FF44582D27
-
Restriction of banks to business area in F110
We have the following requirement. We have multiple business areas in vendor line item level & we restrict vendor open items to a particular business area when making payments (T-code F110) by using the "Free Selection" tab. Also we have assigned the
-
Dbms_xmlschema's automatic type generation
Hi, I would like to import XML documents in Oracle 9i Release 2 which contain a structure like this: <TEST> <TEST/> <TEST/> </TEST> I am using the following schema definition: <?xml version="1.0" encoding="UTF-8"?> <xs:schema xmlns:xs="http://www.w3.
-
Disable Sound On Keypress Option - Sound Still Plays
Greetings, I've disable the sound on keypress option under input settings, yet I still get a key sound when typing. Any way to disable this? I am using the android keyboard with Lenovo IME. EDIT: From what I can tell, its the Lenovo IME since the and
-
hi - I have some doubt regarding some retrieving data. Here is my table data : id1 id2 name 35 30 java 35 31 c 36 32 cpp 36 33 vc 37 34 abc 35 tool 36 temp 37 mydir here is the logic : if id2 equals to id1 , then i can get retrive the results. if id1