Help! I cant find my viewer!

I dont know what I did last night but my viewer dissapeared and I cant get it back up. Where did it go and how do I get it?

double cick a video clip in the browser, just in case you accidentally closed it
or <command 1> is the keyboard shortcut to make the viewer active
and <control U> is the keyboard shortcut that will return your screen to the default layout. Which is the same as the menu Window->Arrange->Standard

Similar Messages

3gs no service after updating to ios 5 tried network reset, reset all settings and even restoring from back been with out phone for 3 weeks now need help telus cant find network problem and apple has bad customer support please help!!!

my 3gs has no service after updating from ios 5 tried resetting network settings, resetting all settings and restoring from back up on itunes.
telus cant find any network problems and apple is difficult to deal with.please help 3 weeks with no phone and $70 a month not happy.

I have been having a similar problem for the last few days.Without warning the signal will just completely duck out leaving the device searching for several minutes before settling on a no signal message.
Sometimes restarting the device, toggling data and 3g settings or toggling Airplane Mode will set things right. However, a lot of the time I've been left without a working phone.
I don't believe this is a SIM issue, as I had to change my SIM only one month ago for another signal related problem. Again any help would be appreciated here as well.

Serial number help. Cant find case with the number.

Need to install on new computer. Cant find the original case = no serial number. The product code is [removed]. Adobe Photoshop CS5 Extended. Student and Teacher Edition

Check your Adobe account where?
We do have CS6, no serial number, wasn't given by the Apple dealer who installes CS6. We want to upgrade to CC. Do all ready have a team. What to do now?
thanks for your answer!

Ezdrummer - help I cant find it

I have recently bought ez-drummer, The installation was successfull,
I have had Logic Pro 7 for a while now but I am still finding my way round,
I have created my instrument track, Then I look through the I/0 to find it but its not there,
I have also looked through the inserts but its not there,
Can anybody help,
Thanks in advance.

gr3gf1tch wrote:
I have recently bought ez-drummer, The installation was successfull,
I have had Logic Pro 7 for a while now but I am still finding my way round,
I have created my instrument track, Then I look through the I/0 to find it but its not there,
I have also looked through the inserts but its not there,
Can anybody help,
Thanks in advance.
G5 Mac OS X (10.0. x)
Hi,
Firstly, are you sure the installation of EZ drummer included an Audio Unit plug-in version?
Secondly, Logic Pro 7, is compatible with only Mac os 10.3 and later.
from this website:
http://www.apple.com/support/downloads/logicproupdate.html
System Requirements
Mac OS X 10.3 or later
Sinnce you are running a OLD version of Mac Os ( you state 10.0.x) then my suggestion to you is to update your Os first. then check with the maker of EZdrummer, and see what the correct version of their plu-in will be for your machine and OS.
There recently were many many many threads about how Apple Os's have been updating Logic's Audio Unit validation tool utility, and therefore rendering some plug-ins unusable. That is most probably what is happening here.
Cheers

Help!, cant find method

Dear all,
I cant figure out what the problem is, if anyone has any clues I would be eternally grateful :P
//http://www.dickbaldwin.com/java/Java028.htm
//http://java.sun.com/docs/books/tutorial/java/nutsandbolts/arrays.html
//http://en.wiktionary.org/wiki/Wiktionary:English_inflection
//http://java.sun.com/developer/J2METechTips/2002/tt0131.html
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import java.io.*;
import javax.microedition.io.*;
public class HoroscopesMidlet2 extends MIDlet implements
CommandListener {
private Display display;
private Command exit;
private Command enter;
public TextField month;
public TextField day;
private Form form;
//star sign variables
int beginDay;
int beginMonth;
String name;
// returns horoscope name
public String getName() { return name; }
public HoroscopesMidlet2(int bd, int bm, String nm) {
     //star sign variable assignments
     beginDay = bd;
beginMonth = bm;
name = nm;
//month = new TextField ("Month","",10,TextField.NUMERIC);
//day = new TextField ("Day","",10,TextField.NUMERIC);
form = new Form ("Horoscopes");
exit = new Command ("Exit", Command.CANCEL,2);
enter = new Command ("Enter", Command.OK,2);
public void startApp() {
display = Display.getDisplay(this);
form.append(month);
form.append(day);
form.addCommand(exit);
form.addCommand(enter);
form.setCommandListener(this);
display.setCurrent(form);
public void pauseApp() {
public void destroyApp(boolean unconditional) {
notifyDestroyed();
class Horoscope {
HoroscopesMidlet2[] signs;
public Horoscope() {
signs = new HoroscopesMidlet2[12];
signs[0] = new HoroscopesMidlet2(22, 12, "Capricorn");
signs[1] = new HoroscopesMidlet2(21, 1, "Aquarius");
signs[2] = new HoroscopesMidlet2(20, 2, "Pisces");
signs[3] = new HoroscopesMidlet2(21, 3, "Aries");
signs[4] = new HoroscopesMidlet2(21, 4, "Taurus");
signs[5] = new HoroscopesMidlet2(22, 5, "Gemini");
signs[6] = new HoroscopesMidlet2(22, 6, "Cancer");
signs[7] = new HoroscopesMidlet2(24, 7, "Leo");
signs[8] = new HoroscopesMidlet2(24, 8, "Virgo");
signs[9] = new HoroscopesMidlet2(24, 9, "Libra");
signs[10] = new HoroscopesMidlet2(24, 10, "Scorpio");
signs[11] = new HoroscopesMidlet2(23, 11, "Sagitarius");
HoroscopesMidlet2 findSign(int day, int mth) {
if (mth < 1 || mth > 12)
return null;
if (mth == 12) {
if (day >= signs[0].beginDay && day < 32)
return signs[0];
else
if (day > 31 || day < 1 )
return null;
else
return signs[11];
if (mth == 1) {
if (day >= signs[1].beginDay && day < 32)
return signs[1];
else
if (day > 31 || day < 1 )
return null;
else
return signs[0];
if (mth == 2) {
if (day >= signs[2].beginDay && day < 29 )
return signs[2];
else
if (day > 28 || day < 1 )
return null;
else
return signs[1];
if (mth == 3) {
if (day >= signs[3].beginDay && day < 32)
return signs[3];
else
if (day > 31 || day < 1 )
return null;
else
return signs[2];
if (mth == 4) {
if (day >= signs[4].beginDay && day < 31)
return signs[4];
else
if (day > 30 || day < 1 )
return null;
else
return signs[3];
if (mth == 5) {
if (day >= signs[5].beginDay && day < 32)
return signs[5];
else
if (day > 31 || day < 1 )
return null;
else
return signs[4];
if (mth == 6) {
if (day >= signs[6].beginDay && day < 31)
return signs[6];
else
if (day > 30 || day < 1 )
return null;
else
return signs[5];
if (mth == 7) {
if (day >= signs[7].beginDay && day < 32)
return signs[7];
else
if (day > 31 || day < 1 )
return null;
else
return signs[6];
if (mth == 8) {
if (day >= signs[8].beginDay && day < 32)
return signs[8];
else
if (day > 31 || day < 1 )
return null;
else
return signs[7];
if (mth == 9) {
if (day >= signs[9].beginDay && day < 31)
return signs[9];
else
if (day > 30 || day < 1 )
return null;
else
return signs[8];
if (mth == 10) {
if (day >= signs[10].beginDay && day < 32)
return signs[10];
else
if (day > 31 || day < 1 )
return null;
else
return signs[9];
if (mth == 11) {
if (day >= signs[11].beginDay && day < 31)
return signs[11];
else
if (day > 30 || day < 1)
return null;
else
return signs[10];
} else {
tryAgain();
return null;
public void tryAgain() {
Alert error = new Alert("Date Incorrect", "Please try again", null,
AlertType.ERROR);
error.setTimeout(Alert.FOREVER);
month.setString("");
day.setString("");
display.setCurrent(error, form);
public void commandAction(Command c, Displayable d) {
String label = c.getLabel();
if(label.equals("Exit")) {
destroyApp(true);
} else if (label.equals("Enter")) {
int mm = Integer.parseInt(month.getString());
int dd = Integer.parseInt(day.getString());
HoroscopesMidlet2 hscp = findSign(mm, dd);
}

int mm = Integer.parseInt(month.getString());
               int dd = Integer.parseInt(day.getString());Can you catch the NumberFormatException for this?
Can you print a stackTrace?
try{
     //problem code
}catch(Exception e){
     e.printStackTrace();
}

Help I cant find my folder!!!

OK, this is just someting thats been bugging me for a few years (not enough I suppose).
But in the old days.... (system 7.5 ish) there was an option somewhere within to remember last folder used.
Example I have 10 jpegs on my desktop, I open them all in ps work on them and save them back to a clientA folder sitting in documents, after I have saved the first jpeg to clientA, I'd assume the next jpeg i work on and save as would default to the clientA folder without me having to locate it again and again for all 10 files.
In Quark of old there was a tick box remember last folder or something to that effect.
Help me out here I waste a lot of time, locating folders.
I'm running leopard and cs4

gary,
By the way, you should NEVER work directly on .jpgs without first saving them in a non-lossy format. Convert them to .psd or .tif. Work on those as much as you wish, then save and keep them as .psd or .tif. Then, if you must have the .jpg format (for, say, a Website or email)
save a copy as a .jpg.
Every time you open --> edit --> save --> open a .jpg, you are replacing some of the data with garbage (artifacts). Higher quality .jpgs have fewer artifacts and they may not be initially visible. But why corrupt your good images?
Neil

I updated my iphone 4s to iOS7 almost 2 weeks from now and i lost my phone's wifi.. the button has greyed out..what will i do?please help me :( cant find an apple store near us

I updated my iphone 4s to iOS7 almost 2 weeks from now and my wifi is greyed out..what will i do? there's no apple store near us too.

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

I was running fine when i got a message that firefox upgrade failed now my home page message is try again later. Manual update says to go to help i cant find that screen what should i do?

Firefox home page no longer comes up. it just says try again later. It started after failed auto update. Should I try manual update or reload firefox directions for doing manual update not clear on which screen to start at.

Do you have any other drive connected, which has a copy of FCP X?
I would make a copy of the application in some drive, just in case; then disconnect the drive, delete the application (could use FCS Remover to delete everything related).
Then, try installing from the purchases tab in the App Store.

Cant find twin view tab.

When I open the nview menu there is no nview display mode under gforceFX5200.
I want to enable the "clone" tab to use a video recorder.
I recently reinstalled my MSI FX5200 using drivers from nvidia site. The original installation disc kaput. I have seen the display with the clone tab, but I think it was when I had the MSI software installed.
OS. Win 98se, amd Athlon 2200 XP.
Thank`s. Tom.

I`m using the 53.03 one so lets see if I can still remember how it was done
the TV must be connected and turned on before it can be detected
go to Display->Settings->Advanced->Nvidia ...
look for the nView tab
click the detect displays button
In the settings (last one) tab there is also a "Treat my secondary ... as a separate card ..." checkbox. Checking that will alow you to set different resolutions for the TV and Monitor and also to use them as one extended desctop ...

To find MM02 views available for an userid

Hi All,
i need to write a code to find the MM02 views available for my userid. For differnent materials, different views are available so view position of a particular view is getting different. Please help me to find the views available for my userid? any code or FM or anything is there?
if i find the available views for my userid, then i can find the exact position of a particular view.
Thanks in advance,
Srilakshmi.

Hi,
you can use table MARA with field VPSTA-Compl. maint. status. It will give you information which views for which material is created.
Here are the list of status related with views.
A     Work scheduling
B     Accounting
C     Classification
D     MRP
E     Purchasing
F     Production resources/tools
G     Costing
K     Basic data
L     Storage
P     Forecasting
Q     Quality management
S     Warehouse management
V     Sales
X     Plant stocks
Z     Storage location stocks
Regards Vassko!

I have lost the File Edit View History Bookmarys Yahoo Tools Help and the Home Icon how do I get them back I cant find anywhere to click to get them back can anyone help please.

I have lost the bar that has my file Edit View History Bookmarks Yahoo tools and help also the Home Icon with back and refresh Icon I cant find anywhere to click to get them back can anyone please help me.
Thanks ([email protected])

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).<br />
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.<br />

Help cant find pictures!!

i switched phone from iphone to galaxy and the girl at the store told me that all my pictures would by on icloud and now i cant find them... please someone help.. there are pics of my daughter i cant get back....

It's possible you backed up your iPhone to iCloud.com but you can't view your pictures there and you can only "restore" your backup files via the iPhone that made it.

Have downloaded a song (Skyfall) and cant find it in the Artists or Album view.

Have downloaded a song (Skyfall) from the iTunes store and cant find it in the iTunes11 Artists or Album view. I find it when I search and can play it. I have tried adding the file manually to my library. Still no show. The song also doesn't show in my smart playlist - 'recently added'. Any help greatly appreciated.

Actual its not Photoshop menu (File > Edit > Presets > Preset Manager > Load)
It is menu Edit>Presets>Preset Manager... That should open the Preset manager dialog. You then need to use the pull-down menu and select tools. Then Click on Load. That should Open a Load file selection dialog. Where you should be able to select a *.TPL file and click Load.

Safari Quits Unexpectedly On Startup OS X 10.10.2 can anyone help? I cant find any malware or any virus

Safari Quits Unexpectedly On Start up OS X 10.10.2 can anyone help? I cant find any malware or any virus I updated to 10.10.2 also to try to fix the problem.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

My ipod touch 4g isnt letting me download apps now whenever i try to it says cannot connect to itunes, i cant find anything that works, i logged out of my apple account and tried to log back in but it wont let me! Can anyone help me

My ipod touch 4g isnt letting me download apps now whenever i try to it says cannot connect to itunes, i cant find anything that works, i logged out of my apple account and tried to log back in but it wont let me! Can anyone help me

Likely Apple problem
iTunes Store - 20% of users are affected
Users are unable to make purchases.
http://www.apple.com/support/systemstatus/

Help! I cant find my viewer!

Similar Messages

Maybe you are looking for