HELP I chose SD project preset instead of source material's HD and I have finished editing, can I change this?
So I have been working on this music video for a long time. I finished yesterday and today I tried to export the video. It had this strange black box around it and the quality was bad.
A little digging showed that the whole time my project presets were for some reason 640x480 SD instead of the 1920x1080 HD of my source video clips, so even if I tried to export in 16:9 HD, stretched 4:3 SD was the maximum quality I could get! The editing is very complex with lots of quick cuts, so there's no way I'm re-doing the whole thing, and I've already tried copying and pasting everything in the timeline to another project with the correct presets, and that doesn't work. Is there ANY way to fix this situation? I'm not too worried about transitions, if I lose those in the process it wouldn't really matter, but I want to save all my quick timed cuts between clips. I am using Premiere Elements 13 on Windows 7 64-bit. The source material is AVCHD 1920x1080p and a mix of 30p and 60p, and I want the final video to be the same but all 30p.
Thanks for reading and I really hope to solve this issue,
Ben.
Ben
Thanks for the update. Sorry that the new project was necessary. You did well making the transition from problem project to new.
However, you may have gotten into some trouble with your export settings. But, at least that can be corrected in the export of the new project and should not require starting from the beginning in yet another project. I am suspecting that your export is 1920 x 1080i 29.97 "M2T AVCHD" instead of 1920 x 1080p 29.97 "M2T AVCHD".
You appear to have used Publish+Share/Computer/AVCHD with the M2T H264 1920 x 1080p24. If you say that your export is 1920 x 1080 29.97, then you would have had to go under the Advanced Button of the p24 preset to customize the preset to 29.97 instead of 24.
But, now for the unexpected under that preset....if you use Frame Rate 24 frames per second, you have progressive settings. But, if you change the Frame Rate to 29.97 under the Advanced Button of the preset, you have interlaced settings. In the latter, note the fields for Upper or Lower for Field Order. That is interlaced video. Interlace video has fields, progressive video does not. And, if you do the export and read the properties of the export using a properties read out program, you confirm interlace and not progressive export. Confirm in project....
Can you use the MP4 H.264 1920 x 1080p30 preset instead?
Please review and consider.
Thank you.
ATR
Similar Messages
-
Where in the world are the printer options??
'''{ Ctrl + P }''' to open the "native print dialog" box, then hit Properties and change it the printer Properties display box.
Once that is changed Firefox should hold that setting until the next time you print something thru Firefox, unless you would be using a different printer. -
hi please I need help , I paid with my wifes credit card the upgrade in my icloud storage today but now any time I send an email appears ....from: my wifes name instead of my name ....how can I change this ,thank you
You might want to make sure your credit card is listed in the billing information associated with your Apple ID (see http://support.apple.com/kb/ht1918).
Also, to change the From name that appears when you address emails on and iOS device, go to Settings>Mail,Contacts,Calendars...tap your iCloud email account, tap you iCloud account at the top, tap Mail at the bottom, then enter the name you want to use in the Name field at the top.
To change the From name on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done. Then quit Mail on your Mac and re-open it. Your new From name should now appear in the drop-down list when you compose a new email. -
I need help installing my adobe premiere element 13. the soft ware is 3.5 GB and I have a 654.4GB space is this enought space to dowload the software. It appears the software is downloading , but when it gets to the end it gives me the error summary message. I have been on the phone for hours being transfered from from person to the next with no results.
reesep
This is not Adobe. Rather user to user. The Adobe Staff and PRE_help presence in this forum is undefined.
The replies from here are not instantaneous. But, your fellow users all try to respond as timely as possible.
What is your computer operating system?
From where are you downloading Premiere Elements 13....direct from Adobe as the tryout or the purchased product? If the purchased product, do you now have a purchased serial number to go with the installation files?
Where are you stopped in the installation....at the Sign In or before? Is the faulting module cited in any messages? What are the error messages?
The usual questions:
1. Are you working with the antivirus and firewall(s) disabled?
2. Are you running the computer programs as administrator?
3. Are you working with a pen and tablet device instead of mouse?
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
5. Are you installing the program to the default location on the Local Disc C (if Windows).
Let us start here and then decide what next based on the details that you post. Subsequent troubleshooting may include:
deletion of the Adobe Premiere Elements Prefs file and/or uninstall, free ccleaner run through, reinstall with antivirus and firewall(s) disabled.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
How do i get passed choose a menue,I have finished editing rendering unable to go to Burn directly to disc, Help would be appreciated, thank you Gordon
Gordon
Thanks for the additional information.
After you have your Timeline content ready for export with destination burn to disc, if you do not go to Tools Menu/Movie Menu to apply disc menus and you go instead directly to Publish+Share/Disc, you will get an automatic message for a Yes or No answer with regard to disc menus.
If you do not want menus, then just click No and you should next see the following
where you make your burn to choice.
The Yes or No message should be for Publish+Share/Disc and not Publish+Share/Computer.
You cannot export a file with menus to the hard drive.
If you went Timeline content, Tools Menu/Movie Menu, and applied a menu, and then decided that you do not want a menu, the go to the top of the Movie Menu customization area and click on Reset, followed by Done. And, then go to Publish+Share/Computer and your choice for the export to file saved to the computer hard drive.
Please review the above and let us know if you are OK with the above details.
Thank you.
ATR -
When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.Anyone?
-
When I want to attach a file to an e-mail I'm sending from my iCloud account it makes the file show up in the body of the e-mail instead of attaching it as a separate file the receiver can open. How can I change this?
It should be an attachment. Your Mac just displays a preview of certain attachments (such as .pdfs) in the body of the message. A PC, for example, will see it as an attached file rather than a preview.
You can save the attachment on your Mac by Control-clicking on it and selecting Save Attachment. -
I have just upgraded to the iphone 5 and now when I send a text message it says its from astrogirl36@*** instead of my name, that is my name for icloud how do I change this
<Email Edited By Host>You are only as young as you feel......
This is an example of how you can select the exact content that you want to sync to your device. You do not have to sync the entire iTunes library. You can pick and choose the music, apps, books and so on that you want to sync. This is using music as an example.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on only the albums or playlists that you want to sync.
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
You can do this with apps, books, movies .... Whatever .... You have the freedom to sync whatever you want. -
my itunes keeps crashing every time i open it with my windows 7. im active military and dont have time to be messing with this. please help
Hello there, Staver13.
The following Knowledge Base article provides some assistance in troubleshooting your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Particularly:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have an old version of InDesign CS5, have not used in a while..about a year. It will not load nor allow me to uninstall and reinstall, please help. I have original discs and serial number. How can I fix this?
CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3
-
After updating to iOS 8.0.2 the App Store and iTunes have disappeared, is anyone else having this problem? Help please!
Well, if they have truly disappeared then something is really messed up. For really messed up stuff, you need to set it to factory default condition, and then afterwards, restore it from your backup.
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414 -
Photoshop 11 continues to not load right away and continously freezes. How can I fix this problem as I've been informed that Adobe will not help me.
This has been going on for months for me. Time to drop Firefox & go back to IE.
-
I’m new to Aperture and neglected to mark RAW+JPEG pairs when I imported (from iPhoto). Now I have two images for each photo. Help!! How can I change this?
How did you import from iPhoto? If you saw the Import panel with raw -jpeg pairs, then you probably did not import your iPhoto library as library, but as files, and then you will see plenty of duplicates - previews, thumbnails, originls, edited versions. If that should be the case, it would be better to delete the import from iPhoto and to import your iPhoto library again, but this time using "File > Import > Library".
Only that would require compatible versions of iPhoto and Aperture. What are your Aperture and iPhoto version numbers? -
When sharing a project I get "frame 72938 (error -1)." and the sharing is stopped. What is this and how do I fix it. Thanks, Kerry
I have an iMac, Processor: 2.7 GHz Intel Core i5, memory: 8 GB 1333 MHz DDR3, OSX 10.7.5, FCPX 10.0.8. I have no third party plugins. First time responding to community. Forgive any protocol errors.
Been working on variety of work projects for months prior to update with no problems. Took time off for a simple new project after updating to 10.0.8. Finished this small (11 minute) new project that is a combination of video and stills, with a few titles and simple transitions. Plays fine within FCPX, however, ran into same problem that started this chain, ie cannot share/export without getting same error message stated above related to a faulty frame.
Tried several share/export Master File settings. Tried moving project (from within FCPX) to another drive which resulted in same error message, but related to other different frames. Tried replacing original data in affected frame with freshly exported replacement files using QTime. Same problem again. Was able to export to Compressor, but resulting ProRes 422 file was so jumpy it wasn't usable.
Tried suggestions of Mark M 98021 and Hank LV, ie, halting all rendering in preferences and deleting render files. After this, I was successful in sharing/exporting at will.
I have several other major projects that I am afraid to return to. I'm not an expert at the inner workings of FCPX and don't have time to keep dealing with this issue. I can leave rendering off, but not a satisfactory solution. Not sure if old rendered files might become infected.
It would seem that there is a problem in the update. I hope this is corrected so I can continue with my work. -
I forgot my security questions and it says Forgot your answers? : Send reset security info email to n•••••@live.fr, but it is not one of my email adress and I don't know how to changes this, can anyone help please ?
I want to buy an app but I can't without these answersYou need to contact Apple. Click here, phone them, and ask for the Account Security team.
(87765)
Maybe you are looking for
-
Mid 2010 Macbook Pro to a Samsung Tv. (Mode not supported)
Hi, I have a macbook pro mid 2010, when connected to an external tv, i get the mirroring option, however when i uncheck the mirroring option (cause i need 2 desktops screen instead of one), my external monitor shows " Mode not supported ". I have a s
-
Time capsule no longer backs up automatically
time capsule does not backup automatically
-
I cannot get 5.1 channel sound out of my Mac Pro (or my PM G5 for that matter). So what are my options for bringing out the surround content of Windows games to my Logitech Z-5500 5.1 system? I investigated the M-Audio Revolution 5.1. It's not compat
-
Photos tab does not show specific albums
Under the Photos tab in iTunes, I canNOT choose the 'selectd albumns' radio button to sync only specific photo albums. FYI...I also have this same problem when trying to sync an AppleTV to iTunes.
-
Change Request Management for Implementation Project
Hello gurus! I have a problem with execution change request in implementation project. I have created Implementation project and task list for him."Change request management" is active for this project. I can create document Change Request, but I can