Help!!! I force inserted a 9.5mm SSD into the harddrive slot of T430 and can't take it out.

Help!!!
Just got my new T430 and did some hardwar upgrade.
Bought an Intel 520 Series 180G SSD. Thougth it was 7mm. (But later found out 520 series come in two sizes 7 and 9.5mm)
I took out the original HDD (with rubber rails) and forced inserted the SSD into the empty harddrive slot.
Now it's really securely stuck in the slot and I can't think of a way to get it out.
Called customer service, they say it's not their original configuration so not under warranty. they suggest I go to a local computer shop.
Can someone give me some suggestions about what I should do ??
Solved!
Go to Solution.

You can often get access to the drive by removing the palmrest, but T430 has a 1-piece palmrest-keyboard bezel and they are harder to get off. DON'T MAKE IT WORSE. If you are not sure what you are doing, take it to a dealer. You might feel stupid asking for that kind of help, but you will REALLY feel stupid if you break your new, expensive machine.

Similar Messages

How do I insert pages from one PDF into the current PDF in Acrobat X?

I just upgraded from Acrobat 8 to Acrobat X.
How do I insert pages from one PDF into the current PDF in Acrobat X pro? I was able to do this from the Edit menu in Acrobat 8 pro. Appreciate instructions. Thanks.

Hi chemadberk,
In my Acrobat 8 Pro, Insert Pages is under the Document menu but anyway...
In Acrobat X, click on the Tools pane(upper right side) then navigate to Pages- the Insert Pages commands are located there.
Hope this helps,
Dimitri
[signature deleted by host]

Java Install, Cannot insert a key value pair into the secure store fails,

Dear All,
I'm doing Java Intallaion in BI7 on CI and in the midle of installtions we encounter,
TRACE      [iaxxejsexp.cpp:199]
           EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.secureStore.cannotInsertIntoSecureStore:
Cannot insert a key value pair into the secure store fails; see output of log file SecureStoreInsert.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store..
ERROR      2008-04-23 11:36:21
           CJSlibModule::writeError_impl()
CJS-30051 Cannot insert a key value pair into the secure store fails; see output of log file SecureStoreInsert.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store..
TRACE      [iaxxejsbas.hpp:460]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2008-04-23 11:36:21 [iaxxgenimp.cpp:731]
           showDialog()
FCO-00011 The step insertAdminDataInSecStore with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|insertAdminDataInSecStore was executed with status ERROR .
TRACE      [iaxxgenimp.cpp:719]
           showDialog()
There's any want in here can help us Please,
Thanks and Best Regards,
Chrisna

The clean way to Uninstall JAVA is through SAPINST.
Make user you drop only the JAVA Schema ID (SAPSR3DB)
If you want to uninstall manually, follow as mentioned below :
1. Stop the central services instance and all dialog instances of your SAP system:
a) Log on to the corresponding instance host as user <sapsid>adm.
b) Execute the following commands:
   To stop the central services instance:
             stopsap r3 <SCSinstanceName>
   To stop a dialog instance:
            stopsap r3 <DialogInstanceName>
2. Stop the J2EE Engine of the central instance:
a) Log on to your SAP system.
b) Call transaction SMICM.
c) Choose Administration J2EE Instance (local) Send Hard Shutdown
2. Drop the J2EE DB schema (the db schema for this one SAP SID) BE VERY CAREFUL, do not drop the DB schema for another existing system or
the ABAP schema.
a. Log on as user ora<dbsid>.
b. Start sqlplus and connect to the database. Enter:
sqlplus /nolog
c. SQLPLUS>connect / as sysdba
d. Enter the following command to delete the database objects of the database schema:
SQLPLUS> drop user SAP<SCHEMA_ID>DB cascade;
e. Enter the following command to get the file name of the corresponding data file in the file system:
SQLPLUS> select file_name from dba_data_files where \
tablespace_name = PSAP<SCHEMA_ID>DB;
f. Enter the following command to delete the tablespace of the database schema:
SQLPLUS> drop tablespace PSAP<SCHEMA_ID>DB including contents;
g. Exit sqlplus:
SQLPLUS> exit
3. Remove folder "data" at: /sapmnt/QO1/global/security/data
4. Remove folder "SDM" at: /usr/sap/<sid>/<Central instance>/SDM
5. Remove folder "j2ee" at: /usr/sap/<sid>/<Central instance>/j2ee
6. Revert CI instance profile to their original state (backup copies should exist) # they should be in the state before the start of the JavaAdd In
7. If lines beginning with the following parameters appear, delete these lines from the default profile, /usr/sap/<SAPSID>/SYS/profile/DEFAULT.PFL:
j2ee/dbname =
j2ee/dbtype =
j2ee/dbhost =
j2ee/dbadminurl =
j2ee/scs/host =
j2ee/scs/system =
j2ee/ms/port =
8. If lines beginning with the following parameters appear, delete these lines from the central instance pro?le and from all dialog instance pro?les,
/usr/sap/<SAPSID>/SYS/profile/<SAPSID>_<INSTANCE_NAME>_<host_name>:
exe/j2ee =
exe/jlaunch =
rdisp/j2ee_start_control =
rdisp/j2ee_start =
rdisp/j2ee_timeout =
rdisp/j2ee_libpath =
rdisp/frfc_fallback =
jstartup/trimming_properties =
jstartup/instance_properties =
jstartup/protocol =
jstartup/vm/home =
jstartup/max_caches =
jstartup/release =
j2ee/dbdriver =
9. Delete the central services instance
10. Restart ABAP and Install JAVA Add-in
Edited by: Shaji Jacob on Apr 27, 2008 11:46 AM

Insert multiple rows of records into the database

The codes below allow me to insert a row of record into the database. How would I changed these to insert multiple rows at once? Please help!
String sql = "INSERT INTO EMPLOYEES" +
"(First_Name, Last_Name, Title, Phone) " +
" VALUES " +
PreparedStatement statement = conn.prepareStatement(sql);
statement.setObject (1, First_Name);
statement.setObject (2, Last_Name);
statement.setObject (3, Title);
statement.setObject (4, Phone);
boolean returnValue = statement.execute();

Hi mystiqueX,
As wmolosho has suggested in his answer to this very same question that you also posted to the JavaServer Pages forum, you can create a batch of inserts and perform them using the "executeBatch()" method. I will use Craig's sample code to demonstrate:
(Note that this code is untested!)
conn.setAutoCommit(false);
PreparedStatement statement = conn.prepareStatement(sql);
// assume you have an array of objects here
for (int i = 0; i < data.length; i++) {
statement.setString(1, data<i>.getFirstName());
statement.setString(2, data<i>.getLastName());
statement.setString(3, data<i>.getTitle());
statement.setString(4, data<i>.getPhone());
statement.addBatch();
statement.executeBatch();
conn.commit();If you are not familiar with it, allow me to suggest looking at the Making Batch Updates lesson on the Java Tutorial.
Hope it helps.
Good Luck,
Avi.

I want to insert more than 4k data into the MySql

hi there..
i willing to support mysql.
but there is one thing unsolved..
i wanna insert more than 4k data into the mysql ..
but i can't..
does anyone know about this problem..
i really appreciate for your advice in advance...
thanz for reading...

<PRE>
hi there..
first of all.. thanz 4 ur replies..
i m using mysql 3.x
and using mysql-connector-java-3.1.0-alpha
source code is one of the sample apps..
if u download jconnector3.1.0-alpha. u can see TestBlog.java file on 'testsuite/simple/'
i changed db url, user, passwd atc..
then, i execute TestBlob..
can c following error message
G:\MySql\mysql-connector-java-3.1.0-alpha\mysql-connector-java-3.1.0-alpha>java
testsuite.simple.BlobTest
Loading JDBC driver 'com.mysql.jdbc.Driver'
Done.
Establishing connection to database 'jdbc:mysql://xxx.xxx.xxx.xxx/devel'
is else
userid:'userid'
passwd:'password'
Done.
error...
java.sql.SQLException: Communication link failure: com.mysql.jdbc.PacketTooBigEx
ception
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1079)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1142)
at com.mysql.jdbc.Connection.execSQL(Connection.java:1876)
at com.mysql.jdbc.PreparedStatement.executeInternal(PreparedStatement.ja
va:1590)
at com.mysql.jdbc.PreparedStatement.execute(PreparedStatement.java:1304)
at testsuite.simple.BlobTest.testByteStreamInsert(BlobTest.java:114)
at testsuite.simple.BlobTest.setUp(BlobTest.java:82)
at junit.framework.TestCase.runBare(TestCase.java:125)
at junit.framework.TestResult$1.protect(TestResult.java:106)
at junit.framework.TestResult.runProtected(TestResult.java:124)
at junit.framework.TestResult.run(TestResult.java:109)
at junit.framework.TestCase.run(TestCase.java:118)
at junit.framework.TestCase.run(TestCase.java:111)
at testsuite.simple.BlobTest.main(BlobTest.java:68)
Loading JDBC driver 'com.mysql.jdbc.Driver'
Done.
Establishing connection to database 'jdbc:mysql://xxx.xxx.xxx.xxx/devel'
is else
userid:'userid'
passwd:'password'
Done.
error...
java.sql.SQLException: Communication link failure: com.mysql.jdbc.PacketTooBigEx
ception
at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1079)
at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:1142)
at com.mysql.jdbc.Connection.execSQL(Connection.java:1876)
at com.mysql.jdbc.PreparedStatement.executeInternal(PreparedStatement.ja
va:1590)
at com.mysql.jdbc.PreparedStatement.execute(PreparedStatement.java:1304)
at testsuite.simple.BlobTest.testByteStreamInsert(BlobTest.java:114)
at testsuite.simple.BlobTest.setUp(BlobTest.java:82)
at junit.framework.TestCase.runBare(TestCase.java:125)
at junit.framework.TestResult$1.protect(TestResult.java:106)
at junit.framework.TestResult.runProtected(TestResult.java:124)
at junit.framework.TestResult.run(TestResult.java:109)
at junit.framework.TestCase.run(TestCase.java:118)
at junit.framework.TestCase.run(TestCase.java:111)
at testsuite.simple.BlobTest.main(BlobTest.java:69)
at 68, 69 line of BlogTest.java
public static void main(String[] args) {
new BlobTest("testBytesInsert").run(); <--- 68 line
new BlobTest("testByteStreamInsert").run(); <--- 69 line
i need ur help..
appreciate for your advices in advance..
thanz
</PRE>

Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful

Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful. Mid 2013 iMac.

I don't know how rare this is. I went a week or so without a problem, and now it's starting to recur. Also, in some instances, an email will look unsent (remain in the outbox on the Treo), but it has been sent, and recipients are replying while I'm trying to figure out what is going on. Further, it will send the same email over and over during this madness.
This is a show stopper. If there isn't a software fix soon, I may chuck this phone in the garbage.
Post relates to: Treo 800w (Sprint)
UPDATE: The problem comes and goes. The next day, no changes to the treo, everything workeds. Now i'm suspecting the sprint server, and how it/the phone responds from failing to send while roaming. I've since turned off roaming, and haven't had a problem for several days.
Message Edited by slrichardson on 12-22-2008 01:12 PM

My IPhone shut off by itself and I can't turn it back on. My lock screen button is broken and I tried plugging it into the wall but nothing happened. Can you guys please help me.

My IPhone shut off by itself and I can't turn it back on. My lock screen button is broken and I tried plugging it into the wall but nothing happened. Can you guys please help me.

IIf the battery was completely drained it might take some time before the phone will respond. Wait at least 30 minutes with the phone connected to the charger. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the phone starts up let it continue to charge until it's 100%.
if the broken button will not let you do the reset Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

I keep getting the following message: Runtime Error...Microsoft Visual C + Runtime Library Program C:\Program Files\iTunes\iTunes.exe R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now. Help!!

I keep getting the following message:
Runtime Error...Microsoft Visual C++ Runtime Library Program C:\Program Files\iTunes\iTunes.exe
R6034 An application has made an attempt to load the C runtime library incorrectly and can't open iTunes now.
Please could someone help with this query as I am at a loss as to why this problem is now occurring? Thank you.

Check the user tip below.
https://discussions.apple.com/docs/DOC-6562

Hello! I was on my Mac and then I clicked on iTunes. Then I clicked on iTunes, and accidentally removed my device from my Mac, how can I get it back? Also when I plug my iPod into the computer, it downloads everything, how can I stop this. please help!thx

Hello! I was on my Mac and then I clicked on iTunes. Then I clicked on Account, and accidentally removed my device from my Mac, how can I get it back? Also when I plug my iPod into the computer, it downloads everything that is on my computer, how can I stop this. please help! please help!!!!!!thank you

Is the iPod still singed into the account isn Settings>iTunes and App Stores and SettingsZ>iCloudl? If it is then I would not be concerned.
Also see:
iTunes Store: Associating a device or computer to your Apple ID
since you may have started the 90 day window.
For the other "problem", go to iTunes>Preferences>Devices and check the box that says Prevent iPod....automatically syncing.

I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

1-800-676-2775 apple support tech support 1 800 275 2273
If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
click the apple----->click about this Mac ------> click on version----> until you see the serial number. You may have to do this a couple of times if it freezes before you have all the numbers. A camera might help.
Good Luck

TS3406 I have a connection in the top left hand corner and can access the internet with and without internet on my iphone 5c but I can't receive and create texts and calls, someone please help have tried everything!

I have a connection in the top left hand corner and can access the internet with and without internet on my iphone 5c but I can't receive and create texts and calls, someone please help have tried everything!

YOu will need to contact your cell phone provider to resolve those issue, those are carrier features.

I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

I'm having trouble with my macbook pro, I have only had it for three months, when I plugged a camera sd card into the sd slot it isn't appearing anywhere on the computer and i can not access my photographs. can somebody please help me?

Shootist007 wrote:
Clifton I must disagree with you on the above statement. It is my opinion and experience that you should never connect the camera directly to any computer, Mac Windows Whatever.
It is always best to Remove the memory card from the camera and put it in a card reader, whether an external reader or one built into the computer, to copy images from the card.
Hi Shootist. I would be interested in hearing some reasoning on this. I almost always use a USB cable to connect my camera to the MBP for transferring pictures, and have moved about 30,000 this way over the last 6 years since my photography went digital. Recently, on the rare occassions when I have only a few to transfer and I was too lazy to go for the cable, I have used the card reader; about half those times I have difficulty getting the MBP to recognise the card. I find I have to press the card very hard into the slot for it to be recognised.
My rationale is quite possibly wrong, but I feel that the USB connectors are more robust and hard-wearing than the flimsy connectors on an SD card. Also, I haven't measured it, but I think the data transfer is faster with the cable. (I just came across this test, which reports noticeably faster transfer for cable than built-in card reader, but the computer was a PC)
Chiara, sorry for hijacking your thread.

Adobe Elements redemption code? hat do you suggest? I need the serial number to activate and can't find a phone number to call anyone to help!

I bought Adobe Elements in a box. I have looked for the redemption code and taken what appears to be a code from the back of the box, and another from the envelope. They don't work. What do you suggest? I need the serial number to activate and can't find a phone number to call anyone to help! Please contact me at [removed]
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Cannot insert a key value pair into the secure store fails; see output of l

Hi,
how can I fix this problem ?
SAPNW2004sJavaSP9_Trial\SAP_NetWeaver_2004s_SR_1
jdkversion 142_09 .
ERROR 2008-07-10 13:13:31
CJS-30051 Cannot insert a key value pair into the secure store fails; see output of log file SecureStoreInsert.log: SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
Regds
sas

Hi Arzu,
thank you for your replying.
The current OS I am using is Microsoft Windows XP
Service Pack 2.
The very last installation was made with JDK version 142_12.
However it was pointless. I can try to reinstall with
the mentioned newest JCE policy files .
Can tell me from where I can obtain these above
JCE policy files ?
Regards
Erdem Sas

I am using garage band for the first time. I dragged and dropped a song from itunes into the program and I want to extend the length of the song by repeating the first 28 measures. I can't figure it out. Please help

I am using garage band for the first time. I dragged and dropped a song from itunes into the program and I want to extend the length of the song by repeating the first 28 measures. I can't figure it out. Please help. I have spent several hours trying to figure it out on my own but have not been successful. It seems like an easy task. Can anyone help?

dewin1or wrote:
I want to extend the length of the song by repeating the first 28 measures.
split the region at the 28th measure
http://www.bulletsandbones.com/GB/GBFAQ.html#split
(Let the page FULLY load. The link to your answer is at the top of your screen)
then select only the first region and option-drag it to the end of the song

Help!!! I force inserted a 9.5mm SSD into the harddrive slot of T430 and can't take it out.

Similar Messages

Maybe you are looking for